取代1,1'-联-2-萘酚在铜胺络合物催化作用下的氧化反应

用CuCl₂•2H₂O与小分子的有机胺形成络合物, 模拟氧化还原酶对多米诺式反应(Domino reaction)进行催化反应, 在氧气存在条件下, 取代1,1'-联-2-萘酚化合物被氧化为二苯并呫吨类化合物, 产物的结构经核磁共振、红外光谱及质谱进行确证.     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO(OH)₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。     

Li2ZrO3材料吸收CO2性能的进一步研究

用不同结构的ZrO₂合成了一系列在高温下吸收CO₂的Li₂ZrO₃材料，并详细的研究了反应物质的物理和化学性质对生成物吸收CO₂性能的影响。采用SEM、XRD以及TG分析法分别进行了材料结构及其吸收CO₂性能的表征，并使用XPS法测定了材料表面的元素组成。实验结果表明，使用不同结构的ZrO₂合成的Li₂ZrO₃，其吸收CO₂的性能明显的不同。用ZrO₂(t)(四方)合成的Li₂ZrO₃吸收CO₂的速度快，在500 ℃下，20% CO₂（80%空气）的气氛中保持3h，其吸收量可达25（±0.6）%（wt），而以ZrO₂(m)(单斜)为原料制备的Li₂ZrO₃在上述吸收条件下重量仅增加9（±0.6）%（wt）。此外，实验结果还表明化学元素的掺杂对用ZrO₂(m)合成的Li₂ZrO₃的CO₂吸收速度及吸收容量影响较大。     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO （OH）₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。     

纳米复合固体超强酸SO42-/ZnFe2O4的制备与催化合成癸二酸二乙酯的研究

以硫酸盐为原料,添加NaOH和NaHCO₃以制备出碱式碳酸盐前驱体,合成出新型的纳米固体超强酸催化剂SO₄^2-/ZnFe₂O₄,经XRD、BET、IR等检测,粒径为35nm,比表面积很大(137m^2-1),粒度均匀。首次以该固体酸为催化剂,癸二酸和无水乙醇为原料合成癸二酸二乙酯,考察了影响反应的因素。结果表明,醇酸摩尔比为4.0∶1,催化剂用量为1.0g(癸二酸0.1mol),带水剂苯15mL,反应时间2.5h是最佳反应条件,酯化率可达91%,并推断出该催化剂的酸强度-16.02< H_o< -14.52.     

B2O3-Bi2O3-ZnO-Al2O3玻璃助烧剂对BaTiO3陶瓷烧结条件、晶体结构和介电性能的影响

通过调节B₂O₃‐Bi₂O₃‐ZnO‐Al₂O₃(BBZA)玻璃的添加量研究其对钛酸钡(BaTiO₃)陶瓷烧结条件、晶体结构和介电性能的影响。结果表明：添加适量的BBZA玻璃能够有效地将BaTiO₃陶瓷烧结温度由1350℃降至950℃,并使其致密化。同时,添加BBZA玻璃后,BaTiO₃的晶体结构随着烧结温度的升高而发生转变(立方相→四方相)。另外,BBZA玻璃的引入使BaTiO₃陶瓷的居里峰得到了有效的抑制和拓宽。陶瓷微观形貌显示,玻璃相均匀分布在BaTiO₃晶粒表面。优化的BaTiO₃陶瓷制备条件如下：BBZA添加量(质量分数)为2.0%,烧结温度为950℃。在该条件下制备的BaTiO₃陶瓷介电常数达到1364,介电损耗低至1.2%。     

Cu/SO42-/La2O3-ZrO2-Al2O3催化剂的制备及其对C3H6选择还原NO的催化性能

以Al₂O₃为基质，添加ZrO₂和La₂O₃，制成La₂O₃-ZrO₂-Al₂O₃复合载体，然后采用SO₄^2-进行改性，再负载上Cu²⁺，制备了铜基SO₄^2-改性的复合载体催化剂(Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃)。考察了它在富氧条件下对丙烯选择还原NO的催化性能，并借助XRD、SEM、TG、Py-IR、NH₃-TPD、FTIR和TPR等方法研究了Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃的结构和性能的关系。结果表明，ZrO₂的加入主要有利于提高催化剂的低温活性；La₂O₃的加入则主要有利于提高催化剂的热稳定性和还原性能；SO₄^2-能够与Zr形成螯合双配位结构，大幅度促使催化剂表面酸量增加并且酸性增强；因此，有效地提高了Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃在富氧条件下对丙烯选择还原NO的催化活性和水热稳定性。在无水条件下，Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃能使NO的最大转化率高达84.3%，即使在275 ℃ 10%水蒸气存在的情况下，仍能使NO的转化率高达81.2%。     

焙烧温度对Mn/Al2O3-TiO2催化剂结构及氧化NO性能的影响

采用溶胶凝胶法和浸渍法制备10% Mn/Al₂O₃-TiO₂催化剂,借助TPO、XRD、O₂-TPD、Raman、XPS等手段,考察焙烧温度(450~650 ℃)对催化剂结构以及氧化NO性能的影响。TPO结果表明催化剂活性随焙烧温度的升高先增后减,其中焙烧温度为550 ℃时催化剂活性最好。XPS结果显示随着焙烧温度的升高(450~550 ℃),催化剂表面Mn³⁺的含量逐渐升高,与催化剂活性的强弱成对应关系,并且催化剂晶格氧含量下降,而表面化学吸附氧从40.9%增加到64.8%。Raman分析显示550 ℃焙烧时,催化剂表面存在丰富的Mn₂O₃活性物种,并且O₂-TPD分析也表明随着焙烧温度的升高,晶格氧向表面化学吸附氧流动,提高了化学吸附态氧物种的含量。这些结果表明Mn₂O₃可能是NO氧化起主要作用的活性Mn物种,释放更多的表面化学吸附氧物种,将有助于促进NO的催化氧化。     

CeO2表面修饰提高锂离子电池正极材料LiNi0.80Co0.15Al0.05O2的循环及存储性能

采用共沉淀法制备锂离子电池正极材料LiNi_0.8Co_0.15Al_0.05O₂。通过溶胶凝胶法对LiNi_0.8Co_0.15Al_0.05O₂材料进行表面修饰提高循环和存储性能,包覆后的材料经过600℃热处理4 h。测试结果显示,0.2C下,CeO₂包覆量为0.02%(物质的量比)时首次放电比容量为182.44 mAh·g^-1,与未包覆样品相比没有下降;同时包覆后拥有更优的容量保持率,在2.75~4.3 V,0.5C下,100次循环后容量保持达到85.96%。包覆CeO₂不仅可以阻止电极与电解液之间的副反应,而且高氧化性CeO₂包覆层可以提前与电解液反应,从而消耗电解液中痕量的水和HF,保护内部活性材料。     

CrOx/SiO2催化剂上丙烷在CO2气氛中脱氢反应的研究

采用XRD、UV-vis DRS、ESR和微分吸附量热等技术,考察了铬担载量分别为2.5、5和10wt%的CrO_x/SiO₂催化剂的结构、表面性质和氧化还原性能。结果表明,催化剂表面上存在多种Cr的氧化态和聚集形式。随着Cr担载量从2.5wt%到10wt%的逐渐增大,催化剂表面占主导地位的Cr物种由CrO₃单体转为多聚CrO₃和Cr₂O₃晶相。在CO₂气氛中催化剂对丙烷转化率和丙烯选择性的大小顺序为2.5wt%CrO_x/SiO₂>5wt%CrO_x/SiO₂>10wt%CrO_x/SiO₂,反应过程中的原位ESR和UV-visDRS测定结果表明,催化剂表面的反应活性中心为Cr⁵⁺,Cr⁵⁺可由催化剂预处理过程中Cr³⁺的氧化及丙烷反应过程中CrO₃单体的还原产生,在反应中CO₂可使Cr³⁺重新氧化为Cr⁵⁺.     

Y型分子筛固载(1S,2S)-DPEN-Ru(TPP)2催化苯乙酮不对称加氢

采用自由配体法将(1S,2S)-DPEN(1,2-diphenyl-1,2-ethylene-diamine)-Ru(TPP)2(TPP=三苯基膦,triphenylphosphine)配合物封装于NaY沸石分子筛超笼中,制备了(1S,2S)-DPEN-Ru(TPP)2/Y主客体材料(1S,2S)-DPEN=1,2-二苯基-1,2-乙二胺).采用等离子体发射光谱ICP、粉末X射线衍射(XRD)、紫外光谱(UV-Vis)、氮吸附等物理化学手段对所制备材料进行了表征.结果表明,(1S,2S)-DPEN-Ru(TPP)2配合物封装于Y型分子筛超笼中保持了原有的物理化学性能;作为苯乙酮不对称加氢催化剂,在优化条件下,苯乙酮的转化率可达100%,(R)-苯乙醇的对映体过量值(ee值)可达61.0%.该催化剂具有良好的稳定性和重复使用性.     

1-( p -Fluorophenyl)-2-(2′-pyridyl)ethanol and 1-( p -fluorophenyl)-2-(2′-pyridyl)ethene obtained from the condensation reaction of 2-picoline and p -fluorophenylaldehyde under catalyst-and solvent-free conditions

The novel intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol or 2-[2′-(1-hydroxy-1-(p-fluorophenyl)ethyl]pyridine and the corresponding novel dehydration compound 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene or 2-[p-fluorophenylvinyl]pyridine were obtained from the condensation reaction of p-fluorophenylaldehyde and 2-picoline under catalyst-and solvent-free conditions. The intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol was obtained at 42 h reaction time and temperature of 120°C, respectively. ¹H-NMR, IR spectroscopic data of the 1-(p-fluorophenyl)-2-(2-pyridyl)ethanol clearly showed the presence of the-CH₂-CHOH-group. The compound was obtained as a white powder with m.p. 121–122°C and a yield of 8%. For 1-(p-fluorophenyl)-2-(2-pyridyl)ethene, the reaction conditions were similar, but the reaction temperature was increased to yield the double bond in the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene. At the reaction temperature of 140°C, the compound was a slightly brown powder with a m.p. of 78°C and yield of 18%. ¹H-NMR, IR spectroscopic data for the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene showed the presence of a double bond in trans configuration (-CH=CH-), characteristic of a styrylpyridine.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

Summary. N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

New synthesis of ( E )-3,7-dimethyl-2,7-octadienylpropionate and ( E )-3,7-dimethyl-2-octen-1,8-diol, pheromone components of San Jose scaleinsect Quadraspidiotus pernicious and african monarch butterfly Danaus chrysippus

6-Methyl-6-hepten-2-one (3) on reaction with ethyl α-dimethylphosphonate/NaH gives a mixture of (E)-and (Z)-conjugated esters. The major (E)-isomer, (E)-ethyl-3,7-dimethyl-2,7-octadienoate (4), on reduction with LiAlH₄ at room temperature furnishes (E)-3,7-dimethyl-2,7-octadien-l-ol (5) which on propionylation affords (E)-3,7-dimethyl-2,7-octadienyl propionate (1). Carbinol (5) is converted into its silyl ether (E)-2,6-dimethyl-8-t-butyldimethylsilyloxy-l,6-octadiene (6) witht-Bu(Me)₂SiCl in CH₂Cl₂, which on hydroboronation-oxidation with 9-BBN/NaOH-H₂O₂ followed by disilylalion with (n-Bu)₄N⁺ F⁻ at room temperature, gives (E)-3,7-dimethyl-2-octen-l,8-diol (2).     

Hydroisomerization of n -hexane over Mo-loaded Pt/H-Mor catalysts

Three Mo-Pt/H-Mor catalysts, HM-2, HM-3 and HM-4 were prepared by loading 0.05, 0.10 and 0.15 wt.% of Mo, respectively, on the Pt/H-Mor (HM-1) support. Effect of the Mo loading on the n-hexane hydroisomerization reaction was studied by comparing the products obtained on the parent Pt/H-Mor support and the three Mo-loaded catalysts. The n-hexane conversions were increased with a Mo loading up to 0.10 wt.% Mo (HM-2), and a further increase of the Mo content to 0.15 wt.% (HM-3) caused a decrease in the conversion. Among the catalysts, HM-3 prepared by 0.10 wt.% Mo loading on Pt-HM provided the highest isomer yield of 57.4 wt.%, with the highest di-branched isomer selectivity of 11.7 wt.%. The catalytic activity of Mo-loaded catalysts was greatly influenced by the reaction temperature, i.e., the catalysts exhibited an increase in the isomer yields with increasing reaction temperatures, i.e. from 250°C to 310°C.     

用原位红外技术研究Ag-MoO3/ZrO2催化丙烯气相环氧化反应

制备了对丙烯直接气相环氧化具有优良催化性能的Ag-MoO₃/ZrO₂催化剂, 采用原位FT-IR技术研究了丙烯、环氧丙烷及丙烯和氧气混合气在载体和催化剂上的吸附及反应行为. 研究表明, 丙烯在ZrO₂载体和20%Ag-4%MoO₃/ZrO₂催化剂上吸附后, 均不发生化学反应, 而环氧丙烷在ZrO₂载体上吸附后于400 ℃发生开环反应, 在20%Ag-4%MoO₃/ZrO₂催化剂上吸附后于300 ℃发生开环反应. 当丙烯和氧气混合气在ZrO₂载体上共吸附后, 随着反应温度从室温升高至400 ℃, 二者开始反应生成CO₂和H₂O; 混合气在20%Ag-4%MoO₃/ZrO₂催化剂上共吸附后于350 ℃开始反应. 对比非负载型Ag-MoO₃催化剂的研究结果可见, ZrO₂载体的存在使催化剂的活性下降的同时, 提高了对产物环氧丙烷的选择性.     

Synthesis of fused uracils: pyrano[2,3-d]pyrimidines and 1,4-bis(pyrano[2,3-d]pyrimidinyl)benzenes by domino Knoevenagel/Diels-Alder reactions

Abstract  

Knoevenagel condensation of barbituric acids with aromatic aldehydes containing one or two formyl groups was carried out. 5-Arylidenebarbituric acids underwent smooth hetero-Diels-Alder (HDA) reactions with enol ethers to afford cis and trans diastereoisomers of pyrano[2,3-d]pyrimidine-2,4-diones and 5,5′-(1,4-phenylene)bis[2H-pyrano[2,3-d]pyrimidine-2,4(3H)-dione] derivatives in excellent yields (75–88 %). Syntheses were realized by Knoevenagel condensation and HDA reaction in four different reaction conditions: Knoevenagel condensation in water and Diels-Alder reaction in methylene chloride solution, Knoevenagel condensation in water and Diels-Alder reaction without solvent, three-component one-pot reaction in methylene chloride solution, or three-component one-pot reaction in water. All reactions were carried out without catalyst at room temperature. The reactions of malononitrile with Knoevenagel condensation products of barbituric acids and heteroaromatic aldehydes or terephthalaldehyde were examined and did not provide corresponding pyranopyrimidines.     

Asymmetric Reduction of Ethyl 4-Chloro-3-oxobutanoate to Ethyl (S)-4-Chloro-3-hydroxybutanoate Catalyzed by Aureobasidium pullulans in an Aqueous/Ionic Liquid Biphase System

The asymmetric reduction of ethyl 4-chloro-3-oxobutanoate (COBE) to ethyl (S)-4-chloro-3-hydroxybutanoate ((S)-CHBE) catalyzed by Aureobasidium pullulans CGMCC 1244 was performed in an aqueous/ionic liquid biphase system to improve the productivity and optical purity of (S)-CHBE. The influences of reaction parameters such as shaking rate, phase volumetric ratio, reaction temperature, initial substrate concentration, and pH were studied. In the aqueous/[bmim]PF₆ biphase system and under the optimum reaction conditions of 30 °C, pH 6.6, rotation speed 180 r/min, and reaction time of 8 h, the conversion of COBE, the enantiomeric excess, and the concentration of (S)-CHBE were 95.6%, 98.5%, and 47.1 g/L, respectively. When the substrate was fed in batches under the condition of pH 6.6, the accumulated product concentration could reach up to 75.1 g/L.     

Synthesis and electrical properties of Li1+ x M x Ti2– x (PO4)3 (where M =Sc, Al, Fe, Y; x =0.3) superionic ceramics

Compounds of the system Li_{1+ x} M _x Ti_{2– x} (PO₄)₃ (where M=Sc, Al, Fe, Y; x=0.3) were synthesized by a solid-state reaction and studied by X-ray diffraction. The ceramic samples were sintered and investigated by complex impedance spectroscopy in the frequency range 10⁶–1.2×10⁹ Hz in the temperature range 300–600 K. Two relaxation dispersions related to the fast Li⁺ ion transport in bulk and grain boundaries were found. The activation energies of the bulk conductivity and relaxation frequency were obtained from the slops of Arrhenius plots. The values of the activation energies of the bulk ionic conductivity and relaxation frequency were found to be very similar in all the materials investigated. That can be attributed to the fact that the temperature dependences of the bulk conductivity are caused only by the mobility of the fast Li⁺ ions, while the number of charge carriers remains constant with temperature. Electronic Publication