Electrochemical reactivity of Li–Mn–O and Li–Fe–Mn–O spinels

Electrochemical reductive dissolution of Li–Mn–O and Li–Fe–Mn–O spinels and Li⁺ extraction/insertion in these oxides were performed using voltammetry of microparticles. Both electrochemical reactions are sensitive to the Fe/(Fe+Mn) ratio, specific surface area, Li content in tetrahedral positions, and Mn valence, and can be used for electrochemical analysis of the homogeneity of the elemental and phase composition of synthetic samples. The peak potential (E _P) of the reductive dissolution of the Li–Mn–O spinel is directly proportional to the logarithm of the specific surface area. E _P of Li–Fe–Mn–O spinels is mainly controlled by the Fe/(Fe+Mn) ratio. Li⁺ insertion/extraction can be performed with Mn-rich Li–Fe–Mn–O spinels in aqueous solution under an ambient atmosphere and it is sensitive to the regularity of the spinel structure, in particularly to the amount of Li in tetrahedral positions and the Mn valence. Electronic Publication     

Bubble points of hydrogen chloride–water–isopropanol and hydrogen chloride–water–isopropanol–benzene systems and liquid–liquid equilibria of hydrogen chloride–water–benzene and hydrogen chloride–water–isopropanol–benzene systems

Bubble points of the HCl–water–isopropanol and the HCl–water–isopropanol–benzene systems and liquid–liquid equilibria (LLE) of the HCl–water–benzene and the HCl–water– isopropanol–benzene systems were measured at 25–85°C and 30–70°C, respectively. The electrolyte nonrandom two-liquid model proposed by Chen et al. [C.-C. Chen, H.I. Britt, J.F. Boston, L.B. Evans, AIChE J. 28 (1982) 588–596] can satisfactorily correlate bubble points and liquid–liquid equilibria of the present mixed-solvent electrolyte systems over the entire range of temperature and concentrations using only binary adjustable parameters.     

On hydrolysis of Ba–Bi–O and K–Ba–Bi–O oxide systems

Fundamentally different behavior of Ba–Bi–O (Ba : Bi = 11 : 4, 1 : 1, 2: 3, and 1 : 5 mol/mol) and K_nBa_mBi_m+nO_y (m = n = 1, 2,...; exhibiting superconducting properties with T_c = 28–32 K) oxides and BaO₂ in hydrolysis reactions has been revealed by means of potentiometry and chemical analysis. Products of the oxides treatment with water do not contain H₂O₂, evidencing the absence of peroxide ions in their structure. The perovskite-type barium-bismuth(III) oxides are completely hydrolyzed into Ba(OH)₂ and Bi₂O₃ at room temperature.     

New Phase in the Bi–Sr–Ca–Cu–O System

Cooling a melt of a Bi–Sr–Ca–Cu–O system (Bi:Sr:Ca:Cu = 4:3:3:4 or 2:2:2:4) from 1000°C-1050°C yielded crystals of a new red-colored nonsuperconducting phase, accompanying the superconducting 2212 and 2201 phases. Based on the EPR spectra, it was concluded that copper is univalent in this compound. The new phase has a composition Bi_2.2Sr_1.6Ca_1.3Cu₂Ox. The X-ray diffraction pattern has been indexed, and the unit cell parameters of the phase have been determined: space group P2/m, a = 12.93, b = 4.55, c = 10.94 ; = 102.72°.     

BTATz–HNIW–CMDB propellants

The high nitrogen compound 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine and the high energy density material hexanitrohexaazaisowurtzitane (HNIW), were used as substitute of hexogen (RDX) in the composite modified double base (CMDB) propellant formulations, the propellant samples were prepared, the thermal behaviors, nonisothermal reaction kinetics, and thermal safety were carried out, and the eight important parameters were calculated and obtained as the self-accelerating decomposition temperature (T _SADT), thermal ignition temperature (T _TIT), critical temperatures of thermal explosion (T _b), critical temperature of hot-spot initiation (T _cr,hot-spot), characteristic drop height of impact sensitivity (H ₅₀), critical thermal explosion ambient temperature (T _acr), safety degree (S _d), and thermal explosion probability (P _TE). It shows that the content of HNIW has a large effect on the decomposition reaction mechanism of the CMDB propellant, when the content of HNIW is 10 %, the decomposition reaction are controlled by the random nucleation and subsequent growth (n = l), and the reaction mechanism obeys Mampel law; but when the content of HNIW is 20 %, the decomposition reaction are controlled by the chemical reaction (n = 1/4). The mechanism can not be changed by the catalysts, and they just make the apparent activation energy change slightly. For the sample, from BC01 to BC04, the values of T _SADT and T _TIT making an upward tendency, show the resistivity to heat: BC04 > BC03 > BC02 > BC01; the values of T _acr and S _d, BC01 are the maximum and BC02 are the minimum, show the heat sensitivity: BC01 > BC03 > BC04 > BC02. For the same radius, the thermal safety of the sphere sample is greater than that of the infinite cylinder one.     

Phase equilibria in the Sn–As–Ge and Sn–As–P systems

T–x diagrams of polythermal GeAs–SnAs, GeAs–Sn₄As₃ sections of the Sn–As–Ge system and Sn₄P₃–Sn₄As₃ section of the Sn–As–P system were constructed using the results of X-ray powder diffraction and differential thermal analyses. It was found that the section GeAs–Sn₄As₃ is not quasi-binary due to realization of four-phase peritectic transformation L + SnAs ? GeAs + Sn₄As₃ at the temperature of 834 K. The quasi-binary section GeAs–SnAs represents a phase diagram of the eutectic type with the following coordinates of eutectic reaction: temperature of the eutectic point is 840 K, and composition is 20 mol% GeAs. In the Sn–As–P system, the existence of the solid-solution range indicated as (Sn₄As₃) _x (Sn₄P₃)_1?x  was defined. The polythermal section Sn₄P₃–Sn₄As₃ is not quasi-binary due to the fact that in the composition range with a high content of tin arsenide discussed section intersects the peritectic part of the three-phase volume (L + SnAs + α) of the ternary diagram.     

Spontaneous passivity of amorphous bulk Ni–Cr–Ta–Mo–Nb–P alloys in concentrated hydrochloric acids

Rod-shaped amorphous bulk Ni–Cr–Mo-22 at.%Ta-14 at.%Nb–P alloys resistant to concentrated hydrochloric acids were prepared by copper-mold casting. Alloys of amorphous single phase and mixture of nanocrystalline phases in the amorphous matrix were all spontaneously passive in 6 and 12 M HCl and were immune to corrosion in 6 M HCl, although the corrosion weight loss was detected for heterogeneous alloys in 12 M HCl. Spontaneous passivation is due to presence of stable air-formed films in which chromium was particularly concentrated in addition to enrichment of tantalum and niobium. The angle resolved X-ray photoelectron spectroscopy revealed that chromium and molybdenum are rich in the inner part of the film. The major molybdenum species is in the tetravalent state, although penta- and hexavalent state molybdenum is also included. The high corrosion resistance was interpreted in terms of the high stability of the outer triple oxyhydroxide, Cr_1−x−yTa_xNb_yO_z(OH)_3+2x+2y−2z, and the effective diffusion barrier of the inner Mo⁴⁺ and Cr³⁺ oxide layer. Contribution to the Fall Meeting of the European Materials Research Society, Symposium D: 9th International Symposium on Electrochemical/Chemical Reactivity of Metastable Materials, Warsaw, 17th-21st September, 2007.     

Thermal analysis of W-free Co–(Ni)–Al–Mo–Nb superalloys

CuAl layered double hydroxide (CuAl-LDH) was synthesized by co-precipitation. Sodium phenyl phosphate (SPP) and sodium dodecyl sulfate (SDS) are used to modify CuAl-LDH for preparing CuAl-(SPP)LDH and CuAl-(SDS)LDH, which were incorporated into epoxy resin (EP) to obtain EP/CuAl-(SPP)LDH and EP/CuAl-(SPP)LDH nanocomposites. The results indicate that SPP and SDS are intercalated into the interlayers of CuAl-LDH, and CuAl-(SPP)LDH has larger layer spacing than CuAl-(SDS)LDH. The thermal stability and flame-retardant performances of EP/CuAl-(SPP)LDH nanocomposites were better than those of EP/CuAl-(SDS)LDH composites. Compared with those of EP/4CuAl-(SDS)LDH nanocomposites, the peak heat release rate (PHRR) of EP/4CuAl-(SPP)LDH nanocomposites is reduced 25.8% and 55.6%, and peak smoke production rate (PSPR) value of EP/4CuAl-(SPP)LDH nanocomposites is reduced 27.6% and 46.2%, value of EP/4CuAl-(SPP)LDH nanocomposites is reduced 27.6% and 46.2%, respectively. The improved flame retardancy and smoke suppression performances of EP/CuAl-(SPP)LDH nanocomposites were attributed to the combination of copper compounds and SPP, promoting the formation of swollen, continuous and compact char layers on the surface of EP nanocomposites during combustion, eventually restraining the decomposition of EP nanocomposites.

     

FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H

The study explored the compatibility between the main product of Portland cement hydration and the main product of the alkali activation of fly ash: C–S–H and N–A–S–H gels, respectively. Both gels were synthesized with laboratory reagents at different pH values. Blends of the two were synthesized as well, using the sol–gel procedure. All the gels were characterized with Fourier transform IR spectroscopy (FTIR). The gels synthesized with this procedure were shown to precipitate together with a silica-rich gel. In addition, the pH level was found to play a determinant role in both C–S–H and N–A–S–H gel synthesis. The C–S–H gel is the major phase formed at pH > 11 and N–A–S–H gel for pH > 12. The results relating to the joint synthesis of the two (C–S–H and N–A–S–H) gels were not conclusive. Technique used for the characterization failed to differentiate between them in the blended material.

Two new layered oxohalides in the system Cu–Yb–Te–O–Cl

Two complex lanthanide(III) transition metal(II) tellurium(IV) oxyhalides, Cu₃Yb₂(TeO₃)₄Cl₄ and Cu₃Yb₃(TeO₃)₄Cl₆ have been synthesized and the crystal structures were determined by single-crystal X-ray diffraction. Both compounds are layered with only weak connections in between the layers. The layers are made up of [YbO₈], [TeO₃] and [CuO_xCl_y] polyhedra. In both compounds the strong Lewis acid cations Yb³⁺ and Te⁴⁺ only form bonds to oxygen while Cu²⁺ form bonds to both oxygen and chlorine. This leads the Cl^? ions to be expelled from the bonding volumes of the crystal structures and protrude from the layers. Magnetic susceptibility measurements were performed on a powder sample of Cu₃Yb₂(TeO₃)₄Cl₄. The Curie–Weiss law found at low temperatures indicates a Curie–Weiss temperature of ca. ?5(1) K. However, indication for long-range magnetic ordering could not be observed down to 1.87 K. The two new phases are to the best of our knowledge the first containing all three of Cu, Yb and Te.     

An easy access to halogenated and non-halogenated spiro-hexadienones

We describe an improved protocol for the synthesis of spiro-hexadienones from Morita–Baylis–Hillman adducts. Solvent modification and temperature resulted in a significant increase in the yield. This protocol was used to synthesize mono- and dibrominated spiro-hexadienones in good overall yields. This report is the first to describe the synthesis of halogenated spiro-hexadienones from Morita–Baylis–Hillman adducts.     

Base-catalyzed reaction between isatins and N-Boc-3-pyrrolin-2-one

The base-catalyzed reaction between isatins and N-Boc-3-pyrrolin-2-one yields Morita–Baylis–Hillman (MBH) adducts instead of the expected aldol products in good to high yields (up to 97%). Various organic and inorganic bases are efficient catalysts for this reaction. Our study excluded the Morita–Baylis–Hillman mechanism for the formation of the MBH-type products. The MBH products are most likely formed as a result of the subsequent isomerization of the original aldol products between isatins and N-Boc-3-pyrrolin-2-one.     

Catalytic asymmetric one-pot synthesis of α-methylene-γ-lactams

An organocatalytic enantioselective synthesis of α-methylene-γ-lactams has been developed. The reaction between protected 2-aminomalonates and Morita–Baylis–Hillman carbonates is catalyzed by chiral Lewis bases to afford the corresponding lactams in excellent yields and moderate to good enantioselectivities, after work-up.     

Solvent-dependent Baylis–Hillman reactions for the synthesis of 3-benzyl-3-hydroxyoxindoles and benzo-δ-sultams

We have developed a solvent-dependent method for the preparation of novel benzo-δ-sultam and 3-benzyl-3-hydroxy-N-methyloxindole scaffolds. A variety of 3-(methoxy(phenyl)methyl)-1-methyl-1H-benzo-[c][1,2]thiazine 2,2-dioxides and 3-benzyl-3-hydroxy-1-methylindolin-2-ones were obtained in moderate to high yields via DBU-catalyzed Baylis–Hillman reaction of a number of (E)-N-(2-formylphenyl)-N-methyl-2-phenylethenesulfonamides in DMF and MeOH, respectively. The proof of the structures relies on analytical investigation and X-ray crystallography. Whereas reaction of (E)-N-(2-formylphenyl)-N-methyl-2-phenylethenesulfonamides in MeOH presumably proceeds through intramolecular Baylis–Hillman/dehydration, 3-hydroxy-N-methyloxindoles seem to have been generated via intramolecular Baylis–Hillman/1,3-H shift/oxidation/intramolecular cyclization tandem sequences in DMF.     

Synthesis of hexahydroisoindole-3a-carboxylates by IMDA reaction of Morita–Baylis–Hillman adduct-derived dienes bearing a Z-alkenyl tether

An intramolecular Diels–Alder (IMDA) reaction of Morita–Baylis–Hillman adduct-derived dienes bearing a Z-alkenyl dienophile tether afforded hexahydroisoindole-3a-carboxylates in excellent yields and stereoselectivity.     

Stereoselective synthesis of benzofulvenes via a palladium-catalyzed cyclization of 1,3-dienes derived from Morita–Baylis–Hillman adducts

A facile synthesis of benzofulvenes was carried out starting from the Morita–Baylis–Hillman adducts of 2-bromobenzaldehyde. The synthesis was carried out via the sequential bromination, Wittig reaction with aldehyde, and Pd-catalyzed intramolecular Mizoroki–Heck reaction. The stereochemistry of benzofulvenes was dependent on the reaction condition, especially on the kinds of base and reaction time, and the substituent of starting materials.     

Synthesis of cinnamate ester–AZT conjugates as potential dual-action HIV-1 integrase and reverse transcriptase inhibitors

Synthetic approaches to a series of novel cinnamate ester–AZT conjugates have been explored and a successful pathway has finally been developed. α-(Halomethyl)cinnamate esters, obtained in high yield by treating benzyl-protected salicylaldehde-derived Baylis–Hillman adducts with acetyl bromide at low temperature, have been treated with propargylamine to afford substrates for click chemistry reactions with azidothymidine (AZT) in the presence of in situ generated Cu(I) catalyst to produce the title compounds.     

A tactical approach for the synthesis of novel β-lactam-substituted,polycyclic-fused isoxazolidine derivatives via an intramolecular [3+2] cycloaddition reaction

The synthesis of functionalized β-lactam-substituted, tricyclic chromenoisoxazolidine and tetracyclic naphthopyranoisoxazolidine derivatives by intramolecular nitrone cycloaddition reaction is described. The O-allyl hydroxyaldehyde derivatives, obtained from Baylis–Hillman adducts (BHA) derived from β-lactam aldehyde underwent intramolecular cycloaddition reaction to give β-lactam-substituted, polycyclic isoxazolidine derivatives in good yield. All the products were confirmed by spectral analysis. The products with a β-lactam substituent may find good applications in biological chemistry.     

Synthetic studies on polymaxenolides: model studies for constructing dihydropyran portion and synthesis of lower portion

With a goal of the total synthesis of polymaxenolide, the first hybrid marine natural product, the model studies for constructing the dihydropyran portion based on the originally proposed biosynthesis (C–C bond formation followed by dehydrative cyclization) and the synthesis of the lower portion (the C1–C3, C7–C17 portion) based on an iodide-induced Morita–Baylis–Hillman type reaction (a three-component assembly) followed by Suzuki–Miyaura cross-coupling are described.     

Synthesis of 1H-benzo[g]indazole derivatives: propargyl–allenyl isomerization and 6π-electrocyclization involving two aromatic π-bonds

An efficient synthesis of 1H-benzo[g]indazoles starting from Morita–Baylis–Hillman (MBH) adducts is disclosed. The synthesis was carried out from MBH bromide via a sequential copper-catalyzed alkynylation, one-pot synthesis of pyrazole, propargyl–allenyl isomerization, and a 6π-electrocyclization involving two aromatic π-bonds and an allenyl π-bond.