首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
核壳乳液聚合法制备含氟硅丙烯酸酯乳液   总被引:3,自引:0,他引:3  
以氟醇RfCH2CH2OH和乙烯基硅氧烷VTES为原料合成的氟硅单体,与甲基丙烯酸甲酯、丙烯酸丁酯在复合乳化体系中通过核壳乳液聚合制备了稳定的氟硅共聚乳液。对氟硅单体和氟硅丙烯酸酯共聚物的结构用红外光谱进行了表征,结果表明,得到了目标单体和共聚物。共聚物的TEM形态观察发现,乳胶粒子具有明显的核壳结构,平均粒径在125 nm左右。与丙烯酸酯共聚物相比,氟硅丙烯酸酯共聚物乳胶膜的吸水率降低至8.32%,热分解温度提高了23℃,耐溶剂性与氟硅单体的含量关系不大。  相似文献   

2.
三苯胺-螺硅芴共聚物的合成   总被引:1,自引:0,他引:1  
肖海波  冷冰  田禾 《应用化学》2006,23(2):140-0
三苯胺-螺硅芴共聚物的合成;螺硅芴;三苯胺;共聚物;合成  相似文献   

3.
以SiO_2为起始反应物,与乙二醇、氢氧化钾反应,生成高反应活性的五配位硅钾化合物,并以此为原料与等摩尔比的对苄氯苯乙烯反应制备出含双键单官能团的四配位硅单体;然后与丙烯酸甲酯在甲苯溶剂中进行溶液自由基聚合反应,得到支链含硅共聚物。对合成的四配位硅单体及其共聚物采用红外光谱、元素分析、能谱元素分析、热失重分析、差示扫描量热谱分析、凝胶渗透色谱等测试技术进行了结构表征与性能分析。结果表明.四配位硅单体在1 630 cm~(-1)附近的C=C伸缩振动吸收峰在共聚物中消失了,说明共聚反应完全;共聚物的热性能较好.在357℃开始失重;共聚物的玻璃化转变温度为23.4℃,刚好界于聚丙烯酸甲酯的T_g(8℃)和苯乙烯基四配位硅的均聚物的T_8(32.8℃)之间;共聚物的数均分子量为2.2×10~4,多分散系数为1.76。通过测定共聚物在潮湿空气中(相对湿度RH=90%)放置一年后的IR谱和分子量,结果表明与新合成物的数据基本一致,说明Si—O—C键接到支链上的共聚物结构很稳定。  相似文献   

4.
以二氧化硅为起始原料,与乙二醇、氢氧化钾反应,生成高活性的五配位硅钾化合物.以此为原料,与对苄氯苯乙烯反应,制得含双键官能团的四配位硅单体.然后与甲基丙烯酸β-羟乙酯进行自由基共聚合,得到含硅支链的共聚物.最后用IR、EA、EDS、TG、DSC、GPC等对四配位硅单体及其共聚物作了结构表征.IR表明,四配位硅单体在1630 cm-1附近的C=C伸缩振动吸收峰在共聚物中消失.TG表明,共聚物在343℃开始分解.分子链间通过羟基可以交联成体型结构,具有不溶不熔的特性.用DSC测得共聚物的玻璃化温度为48.1℃.  相似文献   

5.
四配位硅单体及其共聚物的制备和结构表征   总被引:4,自引:0,他引:4  
研究了直接从无定形二氧化硅出发, 与乙二醇、氢氧化钾反应, 生成高反应活性的五配位硅钾化合物, 并以此为原料与含活泼氯的3-氯丙烯反应制备出含双键官能团的四配位硅单体. 讨论了合成单体的条件如温度、反应时间、反应物浓度、溶液pH值及溶剂等因素的影响. 然后以该四配位硅单体与甲基丙烯酸甲酯(MMA)在偶氮二异丁腈(AIBN)作引发剂下进行自由基聚合得到支链含硅共聚物. 并借助于红外光谱(IR)、核磁共振(13C和1H, 29Si)、能谱元素分析对合成的单体进行了结构表征; 用红外光谱(IR)、热失重谱(TG)、差示扫描量热谱(DSC)、凝胶渗透色谱法(GPC)等现代测试手段对支链含硅共聚物进行了结构表征及热性能分析. IR表明四配位硅单体在1646 cm-1处是C=C的伸缩振动吸收峰, 在共聚物中此峰消失; TG表明共聚物在249.6 ℃才开始失重, 552 ℃有机部分失重完毕; GPC分析表明共聚物的数均分子量为8.7万.  相似文献   

6.
热解嵌段共聚物是最近发展起来的一种制备多孔陶瓷的新方法,因其具有可灵活调控孔结构的优势而逐渐受到关注。目前采用该方法制备的主要有硅氧、硅碳、硅氮等硅基多孔陶瓷。依据所用聚合物,多孔陶瓷的制备可分为有机嵌段共聚物/陶瓷前驱体共热解法及有机-无机嵌段共聚物一步热解法两种途径。近年来一步热解法逐渐受到研究者的关注,因为它可以直接通过嵌段共聚物微相结构的控制达到热解陶瓷成孔形状、孔径大小、有序性及比表面积等参数的较好调控,有望拓宽多孔陶瓷的应用领域。本文对这两种制备方法进行了比较,综述了国内外相关研究进展。  相似文献   

7.
采用活化硅小球与双乙烯基封头剂反应制得乙烯基硅烷键合相,在过氧化苯甲酰诱发下,乙烯基硅烷键合相进一步与苯乙烯(PS)以及二乙烯基苯(DVB)混合单体共聚制得硅基PS-DVB,该硅基PS-DVB共聚物在冰水浴中用氯磺酸磺化制得一种硅基高交联磺化PS-DVB离子交换剂。用红外光谱表征磺化前后及经强碱处理过的离子交换剂,结果发现苯环特征吸收峰的相对强度无明显降低,表明该硅基离子交换剂具有很好的耐酸碱稳定性。用该离子交换剂分离碱性化合物,获得了较好的分离效果。  相似文献   

8.
本文研究了二甲基硅二苯基硅共聚物(P(DMS-co-DPS))作为光敏引发剂,引发苯乙烯进行光聚合的过程。结果表明,聚合为自由基引发的链式反应,聚合速率与P(DMS-co-DPS)浓度的0.37次方成正比;本体聚合活化能为30.6KJ/mol,氧气对聚合无明显影响。  相似文献   

9.
合成了苯乙烯-丙烯酸丁酯-乙烯基三乙氧基硅氧烷三元共聚物,并对其结构进行了表征,对其热稳定性、粘度、与纤维的结合能力等物理性能进行了测试。使用自制固相微萃取装置,研究了该聚合物作为固相微萃取涂层的应用性能,对水中小分子烷基苯、氯苯、硝基苯进行了萃取实验,将萃取结果与商品涂层萃取结果进行了比较,令人满意。实验数据表明,苯-丙-硅三元共聚物作为固相微萃取涂层性能优良。  相似文献   

10.
含氟/硅丙烯酸酯乳液的合成进展   总被引:1,自引:0,他引:1  
含氟丙烯酸酯聚合物具有良好的成膜性、光泽性、柔韧性、耐污性及耐腐蚀性,广泛应用于防腐耐候涂料。但其对基体的附着性差,对颜料、填料的润湿性差,不耐低温,加之含氟丙烯酸酯单体价格昂贵,大量使用受到限制。含氟/硅丙烯酸酯共聚物不仅兼备了含氟聚合物的诸多优良性能,而且能有效地提高与基体的附着力并降低聚合物成本。本文综述了氟/硅改性丙烯酸酯乳液常用单体;核壳型乳胶粒的结构及影响因素;氟/硅丙烯酸酯共聚物合成路线。  相似文献   

11.
Some organosilane polymers with high molecular weights have been synthesized by cocondensztion of organosilicon dihalide monomers with sodium metal in toluene. These polymers are both soluble in common solvents and meltable at lower temperatures, and can be molded, cast into films or drawn into fibers. Exposure of the solid polymers to ultraviolet light leads to degradation or crosslinking.  相似文献   

12.
应磊  张安琪  杨伟  曹镛 《化学进展》2009,21(6):1275-1286
电致磷光材料可以同时利用单线态和三线态激子发光,具有较高的发光效率,受到人们广泛的关注。本文综述了近年来通过共价键将磷光配合物单元连接在高分子链上制备电磷光发光聚合物的研究进展。总结了主链型、侧链型以及超支化结构的电磷光发光聚合物的研究进展,评述了上述几类电磷光聚合物的发光性能与分子结构的关系。最后从电磷光发光聚合物的分子结构设计出发,在电磷光发光聚合物领域业已取得进展的基础上,分析了电磷光发光聚合物在电致发光领域应用中存在的一些问题,并展望了电磷光聚合物今后的发展方向。  相似文献   

13.
Formable organosilane polymers containing various reactive side groups were synthesized by hydrosilylation of unsaturated compounds containing reactive groups with poly(methylsilane) in the presence of platinum complexes. These polymers have appreciable solubility in common solvents, can be molded or cast into films or drawn into fibers, and are photoactive.  相似文献   

14.
Functional polymers with sulfobetaine or phosphorylcholine zwitterions as pendent groups are demonstrated as both ligands and host matrices for CsPbBr3 perovskite nanoparticles (PNPs). These polymers produce nanocomposite films with excellent NP dispersion, optical transparency, and impressive resistance to NP degradation upon exposure to water. Multidentate interactions of the zwitterion‐containing copolymers with the PNPs induce dispersed or weakly aggregated nanocomposite morphologies, depending on the extent of zwitterionic functionality in the polymer. Incorporating additional functionality into the polymers, such as benzophenone pendent groups, yields lithographically patternable films, while time‐resolved photoluminescence measurements provide insight into the electronic impact of PNPs in zwitterionic polymer matrices.  相似文献   

15.
郝杰  高玉霞  陈厚睿  胡君  巨勇 《高分子学报》2020,(3):239-266,I0001,I0002
随着可持续发展观念的逐步深入,可持续性聚合物已发展成为当今高分子领域的研究热点之一.萜类化合物作为自然界中一类来源广泛的天然资源,具有多种可修饰位点和丰富的功能性,由它出发制备可持续性聚合物,不仅可以简化聚合物的合成步骤,还可以赋予聚合物独特的立体构型、良好的生物活性和生物相容性等特点,进而拓展其在表面涂层、生物医药、组织工程等领域中的应用.本文综述了近年来国内外基于天然萜类可持续性聚合物的研究进展,从萜类化合物的结构特点出发,系统介绍了基于天然萜类可持续性聚合物的合成策略、特性及应用.  相似文献   

16.
When guest polymers are threaded by host cyclodextrins (CDs) to form crystalline inclusion compounds (ICs), the included polymer chains are highly extended and separated from neighboring chains. This is a consequence of the stacking of the cyclic oligosaccharides, α-, β-, or γ-CD containing 6, 7, or 8 glucose units, respectively, which produces continuous narrow channels (~0.5–1.0 nm diameters), where the guest polymers are included and confined. Observations that illuminate several important aspects of the nano-threading of polymers to form polymer-CD-ICs are described. These include (i) the competitive CD threading of polymers with different chemical structures and molecular weights from their solutions containing suspended solid or dissolved CDs, (ii) the threading and insertion of undiluted liquid polymers into solid CDs, and (iii) suspension of polymer A or B-CD-IC crystals in a solution of polymer B or A and observation of the transfer of polymer B or A from solution to displace polymer A or B and form polymer B or A-CD-ICs, without dissolution of the CD-ICs. In addition, we report observations of polyolefins adsorbed on zeolites, where we believe the adsorbed polyolefin chains are actually threaded and absorbed into the interiors of the zeolite nano-pores, rather than adsorbed on the zeolite surfaces. All of the above observations were made to assist in answering the question “Why do randomly-coiling polymer chains in solution or the melt become threaded or thread into the nano-pores of dissolved or solid CDs and solid zeolites, where they are highly extended and segregated from other polymer chains?” Though still not fully able to answer this question, we are able to assess the importance of several factors that have been previously suggested to be important in the formation of CD-ICs with both polymer and small-molecule guests and to the nano-threading of polymers in general. In particular, the value in observations of the inclusion of guest polymers, as well as small-molecule guests, into solid CDs suspended in their solutions and in neat guest liquids were made apparent, because interactions between host CDs, between CDs and solvents, and between quests and solvents, which complicate and make understanding the formation of polymer-CD-ICs difficult, are either eliminated or can be independently varied in these experiments.  相似文献   

17.
1,2,5,6-Tetraaminoanthraquinone has been condensed with isophthalaldehyde and terephthalaldehyde and their bisulfite addition compounds to yield new heat-stable polymers. It has also been condensed with pyromellitic anhydride to give the pyrrolone. The highest viscosities were obtained in polymers prepared with acid catalysts. The polymers were nearly all soluble in concentrated sulfuric acid but not in organic solvents. Those soluble in sulfuric acid could also be solubilized by reduction with sodium dithionite and potassium hydroxide in aqueous organic solutions. A few polymers were apparently crosslinked, since they would not dissolve in either sulfuric acid or in base on reduction. Weak fibers were obtained by spinning the reduced alkaline solutions of the polymers into aqueous acid.  相似文献   

18.
In this communication, we report on a new route to the functionalization of ATRP polymers exploiting their halide end-groups, which were converted successfully into reactive disulfide end-groups, using sodium methanethiosulfonate. The resultant disulfide-terminated polymers could then be reacted with different functional thiols to yield functional polymers exploiting either thiol/disulfide exchange chemistry or thiol/ene "click" reactions.  相似文献   

19.
Literature data on structural rearrangements taking place in amorphous glassy polymers upon their plastic deformation are analyzed. This deformation is shown to be primarily accompanied by polymer self-dispersion into fibrillar aggregates composed of oriented macromolecules with a diameter of 1—10 nm. The above structural rearrangements proceed independently of the deformation mode of polymers (cold drawing, crazing, or shear banding of polymers under the conditions of uniaxial drawing or uniaxial compression). Principal characteristics of the formed fibrils and the conditions providing their development are considered. Information on the properties of the fibrillated glassy polymers is presented, and the pathways of their possible practical application are highlighted.  相似文献   

20.
Regular aliphatic/aromatic copolyoxamides were prepared from diamine-oxamides and aromatic diacid chlorides by interfacial and solution polymerization. Solution polymerization in chloroform or dimethylacetamide is preferred for the preparation of large quantities of polymers but interfacial polymerization is most conveniently carried out for the preparation of polymers with high molecular weight. Aromatic diacid chlorides used included the diacid chlorides of terephthalic acid, isophthalic acid, 2,6-pyridinedicarboxylic acid, two isomeric naphthalene dicarboxylic acids, two cyclo-hexanedicarboxylic acid isomers, as well as 1,1-cyclobutane-dicarboxylic acid. Copolymers of diamine-oxamides with mixtures of acid chlorides of isophthalic and pyridine dicarboxylic acid and isophthalic acid/tetrachloroterephthalic acid have also been prepared. Most polymers are film-forming and are soluble in concentrated sulfuric acid, trifluoroacetic acid, and dimethylacetamide (containing several per cent LiCl). A number of these polymers gave dense or asymmetric membranes, particularly the polymers from ethylene diamine as the aliphatic diamine, particularly poly(iminoethyleneimino-oxalyliminoethyleneiminoisophthaloyl) (p-222I). Diamine oxamides with more than two amide groups in the molecules have been prepared, and in one case polymers with aromatic diacid chlorides have been prepared by interfacial polymerization. All regular aliphatic/aromatic copolyoxamides are high-melting and generally decompose above 350°C without melting. They can, however, be fabricated from solution into brittle fibers or into desalination membranes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号