Semiquantitative estimation of the mycotoxins citrinin, Ochratoxin A, Aflatoxin M1 and penicillic acid on thin-layer chromatograms with a grey scale

Summary Spots of citrinin, ochratoxin A, aflatoxin M₁ and penicillic acid on thin-layer chromatograms can be semi-quantitatively estimated by using a grey scale, commonly used in photo laboratories. The detection limits are 0.01 g for citrinin, 0.006 g for ochratoxin A, 0.002 g for aflatoxin M₁ and 0.01 g for penicillic acid. Standard curves for these mycotoxins are given.

---

Halbquantitative Bestimmung der Mycotoxine Citrinin, Ochratoxin A, Aflatoxin M₁ und Penicillinsäure auf Dünnschicht-Chromatogrammen mit Hilfe eines Graukeils

Zusammenfassung Mit Hilfe eines in Photolabors gebräuchlichen Graukeils können dünnschicht-chromatographische Flecke der obengenannten Mycotoxine halbquantitativ bestimmt werden. Die Nachweisgrenzen betragen 0,01 g für Citrinin, 0,006 g für Ochratoxin A, 0,002 g für Aflatoxin M₁ und 0,01 g für Penicillinsäure. Eichkurven werden angegeben.

     

Untersuchungen zur Bestimmung von Spurenelementen in Blutserum mit Hilfe der Totalreflexions-R?ntgenfluoreszenzanalyse

Summary The quantitative determination of trace elements in human blood serum by Total Reflection X-Ray Fluorescence Analysis (TXRF) is influenced by absorption- and reflection-effects caused by the organic (proteins) and inorganic (P, S, Na, K, Ca, Cl) matrices. To minimize these effects we have developed a sample preparation technique based on the decomposition of the organic matrix and followed by the separation of the trace elements from the organic matrix by ion-exchange. The described method enables the simultaneous determination of K (1584 g), Ca (666 g), Fe (22 g), Cu (9.6 g), Zn (8.8 g), Se (0.97 g), Sn (1.3 g), Pb (0.12 g) and Rb (1.6 g) (obtained values in parentheses).

---

---

Herrn Prof. Dr. G. Tölg zum 60. Geburtstag gewidmet     

Determination of traces of iron and gallium in high-purity aluminium

Summary A procedure is described suitable for determining iron and gallium down to the levels present in 99.999% pure aluminium. Copper, cobalt, manganese, and lanthanum do not interfere. A single determination takes about two hours.The precision of the method is within 0.1g iron at the 2-g iron level and within 0.4g of gallium at the 2-g gallium level per gram of metal.

---

Zusammenfassung Ein Verfahren zur Bestimmung von Bisen und Gallium in 99,999%igem Aluminium wird beschrieben. Kupfer, Kobalt, Mangan und Lanthan stören nicht. Eine Einzelbestimmung dauert ungefähr 2 Stunden. Die Genauigkeit des Verfahrens beträgt 0,1g Fe und 0,4g Ga bei Anwesenheit von 2g des betreffenden Elementes pro Gramm Metall.

---

Résumé On décrit un procédé permettant le dosage du fer et du gallium jusqu'aux teneurs présentes dans l'aluminium pur à 99,999%. Le cuivre, le cobalt, le manganèse et le lanthane n'interfèrent pas. Un seul dosage demande environ 2 heures.La précision de la méthode est de 0,1g de fer pour 2g de fer présent et de 0,4g de gallium pour 2g de gallium présent par gramme de métal.

     

Spectrophotometric method for phosphine residue determination in coriander

Spectrophotometric method for the determination of phosphine (PH₃) residues in coriander has been developed based on the reaction of phosphine with silver nitrate in 2% aqueous isopropanol. The yellow chromophore formed has an absorption maximum at 430 nm and the linear relation between the absorbances at 430 nm and the concentration of PH₃ is obeyed in the range of 0.02 to 0.17 g. The method is sensitive with a detection limit of 0.008 g and can be applied for determination of 0.02 g/g residue in coriander. Recovery of added PH₃ from a closed system ranges from 96 to 101%.     

Synthesis,characterization and crystal structures of heterometallic trinuclear carbonyl sulfido clusters (η5-Cp)MoFeCo- (CO)8(μ3-S) and [(η5-Cp)Mo]2Fe(CO)7(μ3-S)

HFe2Co(CO)9(3-S) reacts with (5-Cp)Mo(CO)3Cl in refluxing THF to give heterometallic trinuclear clusters (5-Cp)MoFeCo(CO)8(3-S) and [(5-Cp)Mo]2Fe(CO)7-(3-S), which have been characterized by elemental analyses, i.r., 1H- and 13C-n.m.r. and X-ray crystal structure determination. An electrophilic addition–elimination sequence is proposed for their formation.     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

Controlled-potential coulometric studies on fluoride and sulphate complexes of neptunium (VI)

Fluoride and sulphate complexing of Np(VI) has been studied by controlled-potential coulometry at a constant ionic strength. The values of ₁ ^* and ₂ ^* for fluoride complexes were found to be 9.4 and 8.9, respectively, at an ionic strength =0.5. At an ionic strength =1.0, ₁ ^* and ₂ ^* obtained were 6.6 and 10.5, respectively. Sulphate complexing of Np(VI) was studied only at an ionic strength =0.5. The value of ₁ ^* obtained was 5.6.     

The oxidative addition of hydrogen sulfide to the electron-rich triple bond: The isolation and characterization of compounds that contain the Re2(μ-H)(μ-SH) cluster unit

The reactions of Re₂X₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) with H₂S in THF afford the dirhenium (III) complexes Re₂(-H)(-SH)X₄(-dppm)₂, the first examples of the oxidative addition of an S-H unit across an electron-rich metal-metal triple bond. The bromide complex Re₂(-H)(-SH)Br₄(-dppm)₂ (C₂H₅)₂O crystallizes in the space group P2₁/n witha=16.631(2) Å,b=15.967(3) Å,c=19.904(2) Å, =92.698(7)°,V=5279(2) ų, andZ=4. The structure which was refined toR=0.053 (R _w=0.070) for 4903 data withI>3.0(I), shows the presence of an edge-shared bioctahedral geometry with a very short Re-Re distance of 2.4566(7) Å. While the hydrogen atoms of the -H and -SH ligands were not located in the X-ray structure determination, their presence is confirmed by IR and¹H NMR spectroscopy.     

Ein Beitrag zur quantitativen aktivierungsanalytischen Reinheitsbestimmung von Seltenerdoxiden

Zusammenfassung Eine quantitative Spurenbestimmung von Europium in Gadolinium, Praseodym in Neodym und Lutetium in Ytterbium konnte durch Aktivierung der Proben und nachfolgende Abtrennung am Kationenaustauscher Dowex 50W×8 ausgearbeitet werden. Eine vollständige Trennung von Europium und Gadolinium sowie Praseodym und Neodym konnte mit wäßrigen Ammonium--hydroxyisobutyrat-Lösungen erreicht werden. Für die Trennung von Ytterbium und Lutetium erwies sich Ammoniumlactat als geeigneter. Die Position der Elutionspeaks war in jedem Fall einwandfrei reproduzierbar.Mit Hilfe dieses Verfahrens bestimmten sich die Restverunreinigungen in den verwendeten Präparaten zu 0,065 g EuO_1,5/mg GdO_1,5; 1,2 g PrO_1,83/mg NdO_1,5 und 1,5 g LuO_1,5/mg YbO_1,5.

---

A quantitative determination of Eu in Gd, Pr in Nd, and Lu in Yb has been performed by activation of the samples followed by separation on cation exchanger Dowex 50W×8. Complete separation in the systems Eu-Gd and Pr-Nd was achieved with aqueous ammonium -hydroxyisobutyrate solutions, ammonium lactate giving better results in the case of Yb and Lu. In all cases the reproducibility of the position of the elution peaks was satisfactory.Using this separation technique the residual impurities in the given samples were estimated to 0,065 g EuO_1,5/mg GdO_1,5; 1,2 g PrO_1,83/mg NdO_1,5, and 1,5 g LuO_1,5/mg YbO_1,5 respectively.

     

Synthesis and crystal structure of [(η3-C3H5)(CO)2Mo(μ-S2CPCy3)-Mo(η3-CH2CMeCH2)(CO)2]

A novel dimolybdenum complex [(³-C₃H₅)(CO)₂Mo(-S₂CPCy₃)Mo(³-CH₂CMeCH₂)(CO)₂], obtained by reacting the [(CO)₂(³-C₃H₅)Mo(-S₂CPCy₃)Mo(CO)₃]^– anion with an excess of ClCH₂CMe=CH₂, has been characterized by i.r., ³¹P{¹H}, ¹H- and ¹³C-n.m.r. spectroscopy and by elemental analysis. The crystal structure of the complex, determined by X-ray diffraction, shows a definite preference for the central carbon of the S₂CPCy₃ bridge to bind to the Mo(2) atom coordinated by ³-2-methylallyl, rather than the Mo(1) atom attached to unsubstituted ³-allyl ligand.     

Determination of cadmium and copper with ET-AAS after electrochemical deposition on a graphite electrode

The electrodeposition of cadmium and copper on a special graphite disk electrode has been performed at controlled potential. The electrode with the deposit has been inserted into the graphite atomizer HGA-400 by an adapted automatic sampler for the final determination by ET-ASS. The sensitivity of determination has been 0.371 (gl^-1)^-1 for cadmium and 0.025 (gl^-1)^-1 for copper for 2 min electrodeposition and increased linearly with the time of deposition. The limit of detection (3s_bl) has been 7.9 ngl^-1 Cd²⁺ and 0.11 gl^–1 Cu²⁺ for 2 min deposition and it has been improved with increased time of electrodeposition. The technique has been applied to the determination of both metals in seawater and to speciation in the presence of EDTA complexing agent.     

Anwendung der Ringofenmethode zum Nachweis einiger Heteroelemente in organischen Verbindungen

Zusammenfassung Ein schnelles und einfaches Mikroverfahren zum Nachweis einiger Heteroatome organischer Verbindungen wurde entwickelt. Nach Aufschluß mit metallischem Kalium werden die entstehenden Ionen mit der Ringofenmethode getrennt und mit empfindlichen Reaktionen nachgewiesen. Nachweisgrenze: 0,5 bis 1g Stickstoff, 1 bis 2g Schwefel, 2 bis 3g Jod, 4 bis 5g Brom, 5 bis 10g Chlor in 0,5 bis 1 mg Einwaage.

---

Summary A rapid and simple micromethod was developed for the detection of several hetero-elements in organic compounds. After breaking down the sample with metallic potassium, the resulting ions are separated by the ring oven method and detected by means of sensitive reagents. Detection limits: 0.5 to 1g nitrogen, 1 to 2g sulfur, 2 to 3g iodine, 4 to 5g bromine, 5 to 10g chlorine in samples weighing 0.5 to 1 mg.

---

Résumé On a découvert un procédé à l'échelle micro, simple et rapide, pour rechercher certains hétéroéléments dans les composés organiques. Après mise en solution par le potassium métallique, on sépare les ions formés suivant la méthode du four annulaire et l'on effectue la recherche au moyen de réactions sensibles. Limite de dilution: 0,5 à 1g d'azote, 1 àg de soufre, 2 àg d'iode, 5 à 10g de chlore sur 0,5 à 1 mg de prise d'essai.

     

Determination of heavy metals in sea water and in marine organisms by flameless atomic absorption spectrophotometry

Summary In natural waters, heavy metals such as Cd may be present in bound form. It is, therefore, important to consider chemical speciation, especially at low concentrations of the metal where a significant part can be bound by other trace constituents so tightly that it escapes several forms of its determination. It has been demonstrated that even the very strong complexant APDC is unable to leach out all of the heavy metal present in several coastal water samples from the German Bight.This paper describes a new micro method for the determination of total Cd in natural waters. First a small sample is dried in a polypropylene vial. Then the salt residue is heated to 90° C with a mixture of sulphuric and nitric acid for digestion of organic trace constituents (and oxidation of sulphides if present). After dilution subsamples are neutralized using an excess of NaHCO₃ buffer solution. Extraction results are then independent from the possible slight variations of pH. The extractant, a solution of APDC in CCl₄ is stable for weeks, and even the extract is stable for at least 16h. Precision is in the range of 7% at a concentration of 0.066 g Cd l^–1; the detection limit is below 0.002 g l^–1 and can be lowered, if necessary, by enlargement of the original sample. According to the sensitivity of the method the typical blank of 0.022 g Cd l^–1 is high, but it is rather constant (mean variation from the mean: 0.0024 g l^–1).Teil XI: Fresenius Z. Anal. Chem. 299, 206–207 (1979)     

Protonation of Os3(μ-H)(CO)9(μ3-σ,η2-C≡C-R) clusters (R=CMe2OH,C(Me)=CH2)

Protonation of triosmium clusters Os₃(-H)(CO)₉(₃-,²-CC-R) (R=CMe₂OH, C(Me)=CH₂) affords a cationic complex containing a six-electron propargyl ligand which has been detected for the first time.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1144–1145, June, 1993.     

Trace analysis of cationic surfactants in water using HPLC with conductometric detection

Summary A simple and fast determination of trace amounts of commercially used cationic surfactants is described. After extraction from water cationic surfactants are separated by HPLC and detected by conductometry. The detection limit is 3 g/l for distearyldimethylammonium chloride, 16 g/l for ditallowimidazolinium methosulphate, and 6 g/l for dodecylpyridinium chloride.     

Chemical assembly of a new heterometallic trimethylacetate cluster with the Co6Ni2 core

Co-thermolysis of the tetranuclear trimethylacetate clusters M₄(₃-OH)₂(OOCCMe₃)₆(HOEt)₆ (M = Co or Ni; the reagent ratio was 1 : 1) in decalin (2 h, 170 °C) afforded the octanuclear heterometallic cluster Co₆Ni₂(₄-O)₂(₂-OOCCMe₃)₆(₃-OOCCMe₃)₆, which exhibits ferromagnetic properties at 10—8 K.     

Reactions of dodecacarbonyltriruthenium with α,β-unsaturated ketones. Crystal and molecular structures of two reaction products

The thermal reactions of Ru₃(CO)₁₂ with RCOCH=CHPh (R=Me, p-MeC₆H₄) in hydrocarbon solvents lead to the formation of a series of complexes, several of which have been isolated as individual compounds by chromatography. The dinuclear complex Ru₂(-H)(CO)₆(-MeCOCH=CPh) and the tetranuclear complex Ru₄(-H)(-CO)(CO)₇(p-MeC ₆H₄ COCH=CPh)(-p-MeC₆H₄COCH=CPh)(₄-p-MeC₆H₃COCH=CHPh) are characterized by an X-ray structural study. The structures of other reaction products are discussed on the basis of spectral data. The reactions are accompanied by reduction of the starting enones to the corresponding unsaturated ketones.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1285–1293, July, 1993.     

Fallout analysis of atmospheric water precipitations

Summary A rapid ion-exchange method for the determination of ¹⁴⁴Ce, ¹³⁷Cs, ⁸⁹Sr, ⁹⁰Sr and ¹⁴⁰Ba in 2–30 liter samples of atmospheric water precipitations is described. The samples, containing up to 300 mg of calcium, are sorbed on a specially shaped column filled with Dowex 50, X-8 or Dowex 50W, X-8. Radio-cerium and radio-caesium are stripped from the column with 0.6 M ammonium glycolate/ 0.2 M NaCl, pH 5, radio-strontium and radio-barium with 0.15 M ammonium citrate, pH 7.5. The isolated radio-nuclides are counted on a low-background beta-counter: ¹⁴⁴Ce as CeO₂, ¹³⁷Cs as Cs-dipicrylaminate, ⁸⁹Sr/⁹⁰Sr as SrCO₃, ⁹⁰Y as Y₂O₃, and ¹⁴⁰Ba as BaCO₃. The mean chemical yields amount to 95% for cerium, 85% for caesium, 95% for strontium, 95% for yttrium and 65% for barium. With parallel determinations at levels of a few picocuries, the deviations of the results from the respective mean values generally do not exceed ± 5%. With a 30 l sample the limit of detection amounts to 0.005 Ci/l for ¹⁴⁴Ce, 0.006 Ci/l for ¹³⁷Cs, 0.005 Ci/l for ⁹⁰Sr, and 0.006 Ci/l for ¹⁴⁰Ba.

---

Zusammenfassung Es wird eine schnelle Ionenaustauschmethode für die Bestimmung von ¹⁴⁴Ce, ¹³⁷Cs, ⁸⁹Sr, ⁹⁰Sr und ¹⁴⁰Ba in 2–30 l Proben von atmosphärischen Wasser-Niederschlägen beschrieben. Die Proben, mit einem Calciumgehalt bis zu 300 mg, werden in eine besonders gestaltete, mit Dowex 50, X-8 oder Dowex 50 W, X-8 gefüllte Säule eingewaschen. Radio-Cer und Radio-Caesium werden mit 0,6 M Ammoniumglykolat/0,2 M NaCl, pH 5, Radio-Strontium und Radio-Barium mit 0,15 M Ammoniumcitrat pH 7,5 eluiert. Die isolierten Radio-Nuklide werden in einem Beta-Antikoinzidenzzähler gemessen: ¹⁴⁴Ce als CeO₂, ¹³⁷Cs als Cs-dipikrylaminat, ⁸⁹Sr/⁹⁰Sr als SrCO₃, ⁹⁰Y als Y₂O₃ und ¹⁴⁰Ba als BaCO₃. Die mittlere Rückgewinnung der zugesetzten Träger beträgt für Cer 95%, 85% für Caesium, 95% für Strontium, 95% für Yttrium und 65% für Barium. In Parallelbestimmungen mit Gehalten von einigen Ci/l, überschreiten die Abweichungen der Ergebnisse von den entsprechenden Mittelwerten im allgemein nicht 5%. Bei einer 30 l-Probe beträgt die untere Nachweisgrenze 0,005 Ci/l für ¹⁴⁴Ce, 0,006 Ci/l für ¹³⁷Cs, 0,005 Ci/l für ⁹⁰Sr und 0,006 Ci/l für ¹⁴⁰Ba.

     

Method comparison study on soot-selective techniques

In a long-term field study at two locations with different air pollution levels several soot-selective measurement techniques were compared with a thermochemical method which measures non-extractable carbon (NEC) detecting the evolved CO₂ by means of coulometric titration. The attenuation measurement technique (aethalometer) and the aerosol photoemission method showed good correlations to NEC for concentrations ranging from 1.6g/m³ to 40.8g/m³. The specific mass absorption coefficient of black carbon with respect to NEC varied between 8.4m²/g and 13.7m²/g with respect to the measurement sites, but the value was found to remain constant at each site independent of seasonal or meteorological variations. The ratio of photoelectric signal to NEC varied between 16 fA·(g/m³)^–1 and 33 fA·(g/m³)^–1 depending on the age of the aerosol. The diurnal variations of that ratio showed strong similarities to the traffic patterns. Additionally a slight temperature dependence of this ratio was found for the aged aerosol with a proportionality factor of – 0.35 fA·(K·g/m³)^–1. With the reflectance measurement technique (smoke shade method) reliable NEC determination was not possible for NEC concentrations 5 g/m³.     

Synthesis and X-ray structures of some mono- and binuclear ruthenium complexes with bisphosphine ligands

Summary The dinuclear complexes {RuCp*(-Cl)}₂(-dppm) (1) and {RuCp*(-Cl)}₂ (-dppe) (3) are obtained by reacting [RuCp*(³-Cl)]₄ withdppm, anddppe, respectively.1 is readily oxidized with AgCF₃SO₃, instead of chloride abstraction, to afford the dinuclear complex [{RuCp*(-Cl)}₂(-dppm)](SO₃CF₃)₂ (2) with two metal centers connected by a single Ru-Ru bond. Under the same conditions,3 decomposes to several intractable materials. Similarly to1, RuCp* (dmpe)Cl reacts with AgCF₃SO₃ to afford the Ru(III) complex [RuCp*(dmpe)Cl](SO₃CF₃) (4) without no halide abstraction. The crystal structures of2,3, and4 are presented.

---

Synthese und Röntgenstrukturanalyse einiger ein- und zweikerniger Rutheniumkomplexe mit Bisphosphinliganden

Zusammenfassung Die Komplexe {RuCp*(-Cl)}₂(-dppm) (1) und {RuCp*(-Cl₂(-dppe) (3) wurden durch Umsetzung von [RuCp*(³-Cl)]₄ mitdppm bzw.dppe dargestellt.1 wird durch AgCF₃SO₃ zum zweikernigen Komplex [{RuCp*(-Cl)}₂(-dppm)](SO₃CF₃)₂ (2) oxidiert, welcher eine Ru-Ru-Metallbindung aufweist. Unter den gleiche Reaktionsbedingungen zersetzt sich3 zu undefinierten Produkten. Analog zu1 reagiert RuCp* (dmpe)Cl mit AgCF₃SO₃ zum Ru(III)-Komplex [Ru(Cp*)(dmpe)Cl](SO₃CF₃) (4) wobei es zu keiner Chloridabspaltung kommt. Von2,3, und4 wurden die Kristallstrukturen bestimmt.