Unsymmetrically substituted furoxans. IIII. Methylnitrofuroxan: Its structure and behavior toward nucleophilie substitution

A series of unsymmetrically substituted furoxans have been prepared from methyinitro-furoxan and a variety of nucleophilic reagents. The nmr study of these compounds and of their parent furazans suggested the structure of 3-methyl derivatives for all the furoxans synthesized: on this ground the 3-methyl structure for methylnitrofuroxan was proposed. On heating some 3-methylfuroxan derivatives, a partial isomerization into the corresponding 4-methyl isomers occurred.     

1β-Methylcarbapenem intermediates via the thiolysis of a Meldrum's precursor

5-{3-[1-(tert-Butyldimethylsilyloxy)ethyl]-4-oxo-azetidin-2-yl}-2,2,5-trimethyl-[1,3]dioxane-4,6-dione (3) has been submitted to nucleophilic attack with various nucleophiles. Meldrum's moiety transesterification, C4-substitution, β-lactam ring opening and Meldrum's moiety decarboxylation were observed. Reaction of 3 with ethanethiol and dimethylaminopyridine in ethanol quantitatively furnished ethyl 2-{3-[1-(tert-butyldimethylsilyloxy)ethyl]-4-oxo-azetidin-2-yl}-thiopropionate as the 1:1 mixture of β (7a) and (8a) diastereoisomers.     

Unsymmetrically substituted furoxans. VII. A 13C NMR study of a series of isomeric pairs of furoxans and the structure of the two isomeric chloro-phenyl-furoxans

The structure of two isomeric chloro(phenyl)furoxans is proposed by comparison of their ¹³C nmr spectra with those of several unsymmetrically substituted furoxans and related furazans.     

Synthesis and characterization of sulfonamides containing 8-aminoquinoline and their Ni(II) complexes. Crystalline structures of the Ni complexes

Reaction between 8-aminoquinoline and benzenesulfonyl, toluene-4-sulfonyl and naphthalene-2-sulfonyl chlorides in a basic medium leads to the formation of the corresponding sulfonamides. Reaction of these sulfonamides with Ni(II) salts leads to the formation of the corresponding complexes, with a NiL₂ stoichiometry. Determination of the crystalline structure by X-ray diffraction shows an octahedral environment for the Ni(II) ions, sulfonamides acting as bidentate ligands and two solvent molecules completing the octahedral coordination. The spectroscopic and magnetic properties of these compounds are also discussed.     

Structure and chemistry of 4-hydroxy-6-methyl-2-pyridone

The structure of 4-hydroxy-6-methyl-2-pyridone formed by the reaction of 6-methyl-2H-pyran-2,4(3H)-dione and ammonia is characterized. A method is discussed for the structure determination of pyridone type compounds. Reaction of 4-hydroxy-6-methyl-2-pyridone with an equivalent amount of benzenesulfonyl chloride gives 4-benzenesulfonyloxy-6-methyl-2-pyridone. With two equivalent amounts of benzenesulfonyl chloride, 2,4-dibenzenesulfonyloxy-6-picoline is formed. 4-Hydroxy-6-methyl-2-pyridone is preferentially attacked by electrophiles at the 3 position.     

Syntheses of substituted-1,2,4-triazoles

Starting from the readily available 3-phenylpropionitrile, 3-(or 5-)(2-phenethyl)-1,2,4-triazole 3 was prepared. Reaction of compounds 3 with diazomethane afforded 1-methyl-3-(2-phenethyl)-1,2,4-triazole (4) and 1-methyl-5-(2-phenethyl)-1,2,4-triazole (5) . Reaction of compound 3 with methanesulfonyl chloride, benzenesulfonyl chloride or p-toluenesulfonyl chloride afforded only one of the expected isomer; namely compounds 6 , 7 and 8 respectively.     

Synthesis,Characterization, and crystallographic analysis of some benzoimidazole derivatives

A number of benzenesulfonyl derivatives of benzoimidazol-2-ylamine and 1-methyl-benzoimidazol-2-ylamine were synthesized, their synthesis reactions under different experimental conditions being monitored by hptlc. The crystal and molecular structures of N-(1-benzenesulfonyl-1,3-dihydrobenzoimidazol-2-ylidene)benzenesulfonamide (4) and N-(1-benzenesulfonyl-3-methyl-1,3-dihydro-benzoimidazol-2-ylidene)-benzenesulfonamide (7) were determined by X-ray diffraction analysis. The structure of compound 4 is made up of two crystallographically independent molecules and that of compound 7 of one molecule. In both cases, the structure contains the imido form of the molecules. There are strong conjugative effects between the imido groups and the imidazolic rings. Weak intramolecular C? H···O hydrogen bonding interactions could influence the molecular conformations.     

Synthesis and electrochemistry of organometallic ethanethiolato bridged complexes of ruthenium(IV)

Reaction of the ruthenium(IV) chloro-bridged dimer [{Ru(η³ : η³-C₁₀H₁₆)Cl(μ-Cl)}₂], 1, with ethanethiol (EtSH) in CH₂Cl₂ gives the bridged-cleaved adduct [Ru(η³ : η³-C₁₀H₁₆)Cl₂(SHEt)], 2. Stirring of two molar equivalents of 2 in methanol with one equivalent of 1 gives the binuclear, mixed chloro/thiolato bridged compound [{Ru(η³ : η³-C₁₀H₁₆)Cl} ₂(μ-SEt)], 3. The related doubly thiolato bridged complex [{Ru(η³ : η³-C₁₀H₁₀)Cl(μ-SEt)}₂], 4, is formed by treatment of 1 with an excess of EtSH, or by prolonged stirring of 2 alone in methanol. Compounds 2–4 have been studied by cyclic voitammetry. Compound 2 undergoes only irreversible oxidation, whereas in the case of both 3 and 4 the observation of significant return waves is consistent with a greater stability of the primary redox products.     

Unsymmetrically substituted furoxans. Part 11. Methylfuroxancarbaldehydes

The two isomeric 3-methyl-4-furoxancarbaldehydes ( 2a ) and 4-methyl-3-furoxancarbaldehyde ( 2b ) have been prepared. Discussion of their structures, thermal equilibration and kinetic of thermal conversion from the 3-methyl to the 4-methyl isomer are also reported. (Phenylsulfonyl)hydrazones 3a and 3b have been prepared as derivatives in view of their potential antitumoral properties.     

Synthesis and antimicrobial activity of some novel substituted 1,2,4‐triazoles bearing 1,3,4‐oxadiazoles or pyrazoles

Several derivatives of substituted 1,2,4‐triazole bearing the pyrazole (or oxadiazole) ring were synthesized via the reaction of 2,4‐dihydro‐4‐benzyl‐5‐(isomeric pyridyl)‐3H‐1,2,4‐triazole‐3‐thione 1a , 1b , 1c with ethyl chloroacetate, hydrazine hydrate, and acetyl acetone (or CS₂/KOH) in absolute ethanol. The intermediate then undergoes an intramolecular cyclization in acidic medium. The newly synthesized compounds 4a , 4b , 4c to 7a , 7b , 7c were characterized using IR, NMR, and MS Spectroscopy. Some of the synthesized compounds 4 , 5 , 7a , 7b , 7c were evaluated for their antibacterial and antifungal activities. Most of these compounds indicated activity comparable to Gentamycine. Also some of them are more active than Tolnaftate, a known antifungal drug. J. Heterocyclic Chem., (2011)     

Recyclization of substituted furoxans into 1,2,3-triazol-1-oxide derivatives

The effect of the position and nature of substituents on the recyclization of substituted furoxans has been established.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences (RAN), Moscow 117913, Russia Institute of Chemical Physics in Chernogolovka, Russian Academy of Sciences (RAN), Chernogolovka 142432, Russia. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 202–209, February, 1999.     

The structures of furazans and furoxans

The IR spectra of furazans and furoxans are characterized by lowered values of frequencies and of integrated absorption band intensities for the C=N bands. The peculiarities of the UV absorption spectra of these compounds are similar to those of pyridine and its benzene analogs in comparison with the corresponding N-oxides. Comparison of the results with those given in the literature regarding chemical properties, delocalization energies, X -ray spectra, and quantum chemistry calculations leads to a conclusion that the 2, 1, 3-oxadiazole ring possesses a definite aromaticity.     

Syntheses of substituted 2-(1-methyl-5-nitro-2-benzimidazolyl)quinolines

Reaction of N-methyl-2-amino-4-nitroaniline ( 1 ) with lactic acid afforded 2-(1-hydroxyethyl)-1-methyl-5-nitrobenzimidazole ( 2 ). Oxidation of compound 2 with chromic acid in acetic acid gave 2-acetyl-1-methyl-5-nitrobenzimidazole ( 3 ). Reaction of compound 3 with substituted 2-aminobenzaldehyde ( 4 ) under basic conditions yielded substituted 2-(1-methyl-5-nitro-2-benzimidazolyl)quinolines ( 5 ). Condensation and cyclization of o-aminoacetophenone (or substituted o-aminobenzophenones) with compound 3 under acetic condition afforded compound 7 . Condensation and cyclization of compound 1 with indole-3-carboxaldehyde ( 11 ) in ethanol in the presence of excess nitrobenzene gave 3-(1-methyl-5-nitro-2-benzimidazolyl)indole ( 12 ).     

A One-Pot Generation of α-Chloro-α-Lithio Alkanephosphonates. A New Preparative Route to 1,2-Epoxyalkanephosphonates

Reaction of lithio anion derived from diethyl alkanephosphonate in the presence of 2 eq. of n-BuLi with benzenesulfonyl chloride gives directly the corresponding diethyl-1-chloro-1-lithioalkanephosphonate, which reacts in situ with carbonyl compounds followed by intramolecular substitution reaction to give 1,2-epoxyalkanephosphonates.     

Thermolysis of furoxans annulated with five-membered carbocycles in the presence of dipolarophiles

The conditions for the thermolysis of furoxans annulated with differently strained five-membered carbocycles (cyclopentafuroxan 1, norbornenofuroxan 2, and acenaphthofuroxan 3) to bis(nitrile oxides) in the presence of various dipolarophiles (diethyl acetylenedicarboxylate, benzoylformonitrile, and ethoxycarbonylformonitrile) were optimized. It was found that the reactivities of the above furoxans as sources of bis(nitrile oxides) decrease in the order 2 > 1 > 3. Among the furoxans studied, only norbornenofuroxan 2 can be recommended as a possible cross-linking reagent for polymers. The formation of di-N-oxides of 3,4-bis(cyanopropyl)-, 3,4-bis(cyanocyclopentyl)-, and 3,4-bis(cyanonaphthyl)furoxans was detected. They resulted from intermolecular cyclodimerization of bis(nitrile oxides) initially formed in the thermolysis of furoxans 1–3. Dedicated to Academician V. A. Tartakovsky on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1521–1528, August, 2007.     

Macrocycle-supported titanium complexes with chelating imido ligands: analogues of ansa-metallocenes

Reactions of 1,4-dimethyl-1,4,7-triazacyclononane (L1a) and 1,4-diisopropyl-1,4,7-triazacyclononane (L1b) to form 1-aminopropyl-4,7-di-R-1,4,7-triazacyclononane [R = Me (H2L3a) or Pri (H2L3b)] and 1-(2-aminobenzyl)-4,7-di-R-1,4,7-triazacyclononane [R = Me (H2L5a) or Pri (H2L5b)] are reported. Reaction of H2L3a and H2L5a with [Ti(NMe2)2Cl2] gives the ansa-linked macrocycle-imido complexes [Ti(kappa 4-L3a)Cl2] (5a) and [Ti(kappa 4-L5a)Cl2] (6a), respectively, and NHMe2. Reaction of H2L3a with [Ti(NBut)Cl2(py)3] gives [Ti(NBut)(kappa 3-H2L3a)Cl2] (7), which possesses a pendant alkylamine group that does not undergo amine/tert-butylimido group exchange to give 5a and ButNH2. However, reaction of H2L3b and H2L5b with [Ti(NBut)Cl2(py)3] does give amine/tert-butylimido group exchange to form [Ti(kappa 4-L3b)Cl2] (5b), [Ti(kappa 4-L5b)Cl2] (8b), and ButNH2. The compounds 5a,b and 6a,b are isolobal analogues of group 4 ansa-metallocene complexes and relatives of titanium cyclopentadienyl-amido constrained geometry olefin polymerization catalysts. Reaction of 5b with AgOTf affords [Ti(kappa 4-L3b)(OTf)Cl] (8) as the major product, the crystal structure of which has been determined. Alkylation of 6b by RLi gives the dialkyl derivatives [Ti(kappa 4-L5b)(R)2] [R = Me (9) or CH2SiMe3 (10)]. The ethylene polymerization capability of the compounds 5a,b, 6a,b, and 10 in the presence of methylaluminoxane has been determined and compared to that of [Ti(NBut)(kappa 3-L1a,b)Cl2] (11a,b); in all instances, low yields of high-molecular-weight polymer are obtained.     

New palladium(II)-(eta(3/5)- or eta1-indenyl) and dipalladium(I)-(mu,eta3-indenyl) complexes

Reaction of the dimeric species [(eta3-Ind)Pd(mu-Cl)]2 (1) (Ind = indenyl) with NEt3 gives the complex (eta(3-5)-Ind)Pd(NEt3)Cl (3), whereas the analogous reactions with BnNH2 (Bn = PhCH2) or pyridine (py) afford the complexes trans-L2Pd(eta1-Ind)Cl (L = BnNH2 (4), py (5)). Similarly, the one-pot reaction of 1 with a mixture of BnNH2 and the phosphine ligands PR3 gives the mixed-ligand, amino and phosphine species (PR3)(BnNH2)Pd(eta1-Ind)Cl (R = Cy (6a), Ph (6b)); the latter complexes can also be prepared by addition of BnNH2 to (eta(3-5)-Ind)Pd(PR3)Cl (R = Cy (2a), Ph (2b)). Complexes 6 undergo a gradual decomposition in solution to generate the dinuclear Pd(I) compounds (mu,eta3-Ind)(mu-Cl)Pd2(PR3)2 (R = Cy (7a), Ph (7b)) and the Pd(II) compounds (BnNH2)(PR3)PdCl2 (R = Cy (8a), Ph (8b)), along with 1,1'-biindene. The formation of 7 is proposed to proceed by a comproportionation reaction between in situ-generated Pd(II) and Pd0 intermediates. Interestingly, the reverse of this reaction, disproportionation, also occurs spontaneously to give 2. All new compounds have been characterized by NMR spectroscopy and, in the case of 3, 4, 5, 6a, 7a, 7b, and 8a, by X-ray crystallography.     

Synthesis of Novel Benzo‐substituted Macrocyclic Ligands Containing Thienothiophene Subunits

A facile synthetic approach was adopted toward the synthesis of benzo‐fused macrocyclic ligands with thienothiophene group incorporated into the ring system. Thus, treatment of bis(bromomethyl) compound 2 with the K salt of the appropriate bis(phenol)s 3a , 3b , 3c , 3d in boiling DMF led to the formation of the novel macrocyclic diamides 4a , 4b , 4c , 4d in 39–58% yield. Reaction of 2 with the potassium salt (obtained upon treatment of salicylaldehyde 5 with ethanolic potassium hydroxide) in refluxing DMF afforded the novel bis(aldehyde) 6 in 73% yield. Cyclocondensation of 6 with the appropriate bis(N‐substituted) cyanoacetamide derivatives 7a and 7b afforded the target macrocycles 8a and 8b in 48 and 55% yields, respectively. Reaction of the bis(aldehyde) 6 with 1,3‐ and 1,4‐diaminopropane 9a and 9b in refluxing ethanol under high‐dilution conditions afforded the corresponding macrocyclic Schiff bases 10a and 10b in 41 and 37% yields, respectively. Cyclocondensation of 6 with 1,3‐bis(4‐amino‐5‐phenyl‐3‐ylsulfanylmethyl)propane ( 15 ) in glacial acetic acid under high‐dilution conditions gave the macrocyclic Schiff base 14 in 46% yield. On the other hand, cyclocondensation of bis(aldehydes) 17 and 20 with 3,4‐bis(4‐amino‐5‐phenyl‐3‐ylsulfanylmethyl)thienothiophene 16 in refluxing acetic acid under high‐dilution conditions afforded unexpectedly the novel condensed heteromacrocycles 18 and 21 in 33 and 28%, respectively. The novel bis(amine) 16 was obtained in 50% yield upon treatment of 2 with 4‐amino‐1,2,4‐triazol‐3‐thione 11 in ethanol/water mixture containing potassium hydroxide.     

Dmap-Catalyzed Synthesis of Novel Pyrrolo[2,3-D]Pyrimidine Derivatives Bearing an Aromatic Sulfonamide Moiety

4-(N,N-Dimethylamino)pyridine (DMAP), with a dual role as a basic nucleophilic catalyst, was shown to be a highly efficient catalyst for the synthesis of some new N-(2-aryl-7-benzyl-5,6-diphenyl-7H-pyrrolo[2,3-d]pyrimidin-4-yl)benzenesulfonamides through the reaction of 2-aryl-7-benzyl-5,6-diphenyl-7H-pyrrolo[2,3-d]pyrimidin-4-amines (7-deazaadenines) with benzenesulfonyl chlorides. It was also found that the use of DMAP under solvent-free conditions is much more effective than other catalytic systems such as pyridine as both the catalyst and solvent, t-BuOK in t-BuOH, Et₃N in ethanol (EtOH), and even DMAP in dimethylformamide (DMF). The influences of the reaction parameters, temperature, and the catalyst amount, on the catalytic performance have been studied. All synthetic compounds were characterized on the basis of their full spectral data.     

Synthesis of sulfonyloxy furoxans via hydroxyfuroxan ammonium salts

Furoxans are distinctive heteroaromatic compounds in that they are potentially capable of releasing nitric oxide under physiological conditions. In order to utilize the furoxan scaffold for the development of functional molecules, synthetically relevant functional groups are required for access to diverse furoxans. In this report, a facile route to furoxans with sulfonyloxy groups, which are halide surrogates, has been developed. The key features of this strategy include the synthesis and utilization of bench-stable hydroxyfuroxan salts, the use of sulfonyl anhydrides in the sulfonylation step instead of sulfonyl chlorides, and the photochemical isomerization of one regioisomer to another in order to gain access to both.