硝酸镝与丙氨酸配位反应的热化学研究

采用新型的具有恒温环境的反应热量计 ,以 2mol L的HCl作溶剂 ,分别测定了 [Dy(NO3) 3·6H2 O +4Ala]和Dy(Ala) 4(NO3) 3·H2 O在 2 5℃时的溶解焓。通过设计的热化学循环得到六水硝酸镝与丙氨酸配位反应的反应焓ΔrHmθ=30 .638kJ mol,并计算出配合物Dy(Ala) 4(NO3) 3·H2 O在 2 98.1 5K时的标准生成焓ΔfHmθ=-3833.8kJ mo     

三元配合物Tb(Et2dtc)3(phen)的热化学性质

以铜试剂(NaEt2dtc•3H2O)和邻菲咯啉(o-phen•H2O) 与水合氯化铽(TbCl3•3.75H2O)在无水乙醇中制得了三元固态配合物.化学分析和元素分析确定其组成为Tb(Et2dtc)3(phen).IR光谱研究表明配合物中Tb3＋与NaEt2dtc中的硫原子双齿配位,同时与phen的氮原子双齿配位.用Calvet微热量计测定了298.15 K下液相生成反应的焓变ΔrHmθ(l),为(－21.819±0.055) kJ•mol－1,通过热化学循环计算了固相生成反应焓变ΔrHmθ(s),为(128.476±0.675) kJ•mol－1.改变反应温度,研究了液相生成反应的热动力学.用精密转动弹热量计测得配合物的恒容燃烧能ΔcU为(－17646.95±8.64) kJ•mol－1,经计算其标准燃烧焓ΔcHHmθ和标准生成焓ΔfHmθ分别为(－17666.16±8.64) kJ•mol－1和(－1084.04±9.49) kJ•mol－1.     

七水氯化铈与甘氨酸丙氨酸三元固态配合物的热化学

合成了Ce3+与甘氨酸丙氨酸混配体配合物, 通过红外光谱分析、元素分析、热重分析和化学分析, 确定了配合物的组成为Ce(Gly)2(Ala)3Cl3*2H2O, 并用溶解量热法分别测定了CeCl3*7H2O(s), 2Gly(s)+3Ala(s)和Ce(Gly)2(Ala)3Cl3*2H2O(s)在2 mol*L-1 HCl中的溶解焓; 再根据盖斯定律设计了一个热化学循环, 计算得到了七水氯化铈与甘氨酸丙氨酸反应的反应焓ΔrHmθ (298.15 K)=29.075 kJ*mol-1, 并求出了Ce(Gly)2(Ala)3Cl3*2H2O(s)标准生成焓△fHmθ [Ce(Gly)2(Ala)3Cl3*2H2O, s, 298.15 K]=-4468.0 kJ*mol-1.     

三元配合物Dy（Et2dtc）3（phen）的热化学性质

以铜试剂(NaEt2dtc·3H2O)和菲咯啉(phen·H2O)与低水合氯化狄(DyCl3·3.74H2O)在无水乙醇中反应,制得三元固态配合物,化学分析和元素分析确定该化合物的组成为Dy(Et2dtc)3(phen)。IR光谱表明配合物中Dy3 与3个NaEt2dtc中的6个硫原子双齿配位,同时与phen中的2个氮原子双齿配位,可推测其配位数为8。用微热量计测定出298.15 K下液相生成反应的焓变A,H曼(1)为(一19.091±0.015)kJ·mol_。,通过合理的热化学循环计算出固相生成反应焓变△rHmθ(s)为(139.641±0.482)kJ·mol-1;改变反应温度,研究了配合物的液相生成反应的热动力学,配合物的恒容燃烧能△cU用精密转动弹热量计测定为(-16730.21±9.25)kJ·mol-1,其标准燃烧焓△fHmθ和标准生成焓△fHmθ经计算分别为(-16749.42±9.25)kJ·mol-1和(-2019.68±10.19)kJ·mol～1。     

铈和硫代脯氨酸、水杨酸三元配合物的热化学性质

用七水合氯化铈与硫代脯氨酸(C4H7NO2S)和水杨酸(C7H6O3)合成了三元固体配合物[Ce(C7H5O3)2(C4H6NO2S)]·2H2O。根据盖斯定律设计一个热化学循环,用恒温环境的溶解―反应量热法研究得到合成反应的标准反应焓为263.12±0.95 kJ/mol,进而算出配合物298.15 K时的标准摩尔生成焓为-2785.7±3.2 kJ/mol。     

配合物[Sm(C7H5O3)2(C4H6NO2S)]·2H2O的热化学研究

将六水氯化钐,水杨酸与硫代脯氨酸3种物质一起反应,制得了一种新的稀土三元固体配合物[Sm(C7H5O3)2(C4H6NO2S)].2H2O(s)。通过红外光谱、热重差热分析、元素分析等手段确定了其结构与组成。在常压、298.15 K下,分别测定了六水氯化钐、水杨酸、硫代脯氨酸和该配合物在混合溶剂(二甲亚砜∶乙醇∶3 mol.L-1HCl=1∶1∶1)中的溶解焓,并根据热化学原理得出了298.15 K时配合物[Sm(C7H5O3)2(C4H6NO2S)].2H2O(s)的标准摩尔生成焓ΔfHmΘ=(-2913.73±3.10)kJ.mol-1。     

抗坏血酸锌的制备及标准生成焓测定

合成了一种新的补锌剂抗坏血酸锌,通过元素分析、红外光谱、热重、电导和化学分析确定了配合物的组成。用新型的具有恒定温度环境的反应热量计,在298·2K条件下分别测定了ZnO(s) C6H8O6(s)配位反应中反应物和生成物在2mol/L HCl溶液中的溶解焓,设计了一个新的热化学循环,得到固相配位反应焓。进而计算出配合物Zn(C6H7O6)2·4H2O(s)的标准生成焓:ΔfHm[Zn(C6H7O6)2·4H2O,s]=-3528·9±0·5kJ/mol。     

新型三元配合物[RE(C_7H_5O_3)_2(C_6H_4NO_2)·H_2O](RE=La,Ce,Nd)的合成、光谱特性和热化学性质

采用均匀沉淀法,在20%的乙醇水溶液中,用水杨酸、维生素B3与稀土硝酸盐合成了一类新的稀土三元配合物.通过元素分析、化学分析、摩尔电导、红外光谱、紫外光谱、热重-微分热重分析等手段对配合物的结构和性质进行表征,确定了它们的组成通式为[RE(C7H5O3)2(C6H4NO2)·H2O](RE=La,Ce,Nd).维生素B3吡啶环上的N原子和水杨酸的酚羟基均未参与配位,两种配体均是脱质子后以羧酸根与RE3+离子配位,且成键以离子性为主,兼有部分共价性.在298.15 K,用精密的溶解-反应热量计分别测量了配位反应相关各物质的溶解焓,根据盖斯(Hess)定律求得合成反应的标准摩尔反应焓r mHФ分别为:(180.61±0.72)、(187.25±0.68)和(185.61±0.26)kJ/mol.进而求出配合物的标准摩尔生成焓为:f mHФ[La(C7H5O3)2(C6H4NO2)·H2O(s),298.15 K]=-(2493.9±2.9)、f mHФ[Ce(C7H5O3)2(C6H4NO2)·H2O(s),298.15 K]=-(2441.0±2.8)和f mHФ[Nd(C7H5O3)2(C6H4NO2)·H2O(s),298.15 K]=-(2463.1±2.9)kJ/mol.     

氯化钆与L-酪氨酸和甘氨酸三元固态配合物的热化学及热分解动力学研究

合成表征了氯化钆与L 酪氨酸和甘氨酸形成的三元固态配合物Gd(Tyr) (Gly) 3 Cl3 ·3H2 O .用具有恒温环境的溶解 -反应热量计 ,测定了配位反应GdCl3 ·6H2 O (s) +Tyr (s) +3Gly (s) =Gd(Tyr) (Gly) 3 Cl3 ·3H2 O (s) +3H2 O (l)在 2 98.15K时的反应焓为 ( 9.45 1± 0 .468)kJ·mol-1 .计算得配合物Gd(Tyr) (Gly) 3 Cl3 ·3H2 O (s)在 2 98.15K时的标准摩尔生成焓为ΔfH m =-( 4 2 69.7± 2 .3 )kJ·mol-1 .并用热分析手段对配合物进行了非等温热分解动力学研究 ,推断配合物第二步热分解反应机理为二级化学反应 ,其动力学方程为 :dα/dT =(A/β)exp( -E/RT) ( 1-α) 2 ,求得分解反应的表观活化能为E =2 15 .17kJ·mol-1 ,指前因子为 10 1 8.71 s-1 .     

5-氨基间苯二甲酸钠和5-羟基间苯二甲酸钠的热力学性质

在水溶液中合成了5-氨基间苯二甲酸钠(1)和5-羟基间苯二甲酸钠(2)固态样品,元素分析和TG-DTG确定其组成符合C8H5O4NNa2·H2O(1)和C8H4O5Na2·H2O(2).用精密自动绝热热量计测定了它们在78～400K温区的低温热容,将实验值用最小二乘法拟合,得到热容随温度变化的多项式方程,用此方程进行数值积分,得到该温区内每隔5K的舒平热容值和各种热力学函数值.用RD496-2000型微热量计测定了样品在298.15K时的标准摩尔溶解焓分别为ΔsolHmθ(1,s)=-44.552±0.164kJmol-1和θΔsolHm(2,s)=-36.055±0.154kJmol-1,计算了其水合阴离子标准摩尔生成焓分别为θΔfHm(C8H5O4N2-,aq)=-684.56±1.67kJmol-1和ΔfHmθ(C8H4O52-,aq)=-1263.43±2.13kJmol-1.用RBC-II型精密转动弹热量计测定了样品的恒容燃烧热分别为ΔcU(1,s)=-13382.14±5.28Jg-1和ΔcU(2,s)=-10339.15±4.15Jg-1,计算了它们的标准摩尔燃烧焓和标准摩尔生成焓分别为ΔcHmθ(1,s)=-3252.90±1.28kJmol-1和θΔcHm(2,s)=-2522.64±1.01kJmol-1,ΔfHmθ(1,s)=-1406.46±1.66kJmol-1,θΔfHm(2,s)=-1993.79±1.46kJmol-1.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.