半导体硅上电沉积Cu/Co层状薄膜

由磁性层和非磁性层组成的人工调制层状结构多层膜,其物性和磁性都表现出与其它结构的多层膜显著不同的特点,如巨磁阻效应［’,‘l、易磁性方向的改变等”］．其性能的研究不但在磁性理论上具有重大意义,而且有望应用于高性能的磁阻敏感设备及提高磁记录密度等．因而近年来有关这方面的研究越来越引起人们的重视．目前,磁性多层膜的制备主要采用气相沉积、磁控溅射、分子束外延等真空技术．由于电沉积技术具有设备简单、操作方便等特点而成为制备多层膜的颇具活力的工艺．CO／Cll多层膜在C。层厚度较薄时具有较高室温巨磁阻（GMR）…     

电沉积Co-Cu颗粒膜的巨磁电阻效应

从１９８８年Ｂａｉｂｉｃｈ首先在磁性Ｆｅ／Ｃｒ多层膜中发现巨磁电阻效应（ＧＭＲ）以来 ［１］,由于ＧＭＲ本身的科研价值和在磁记录、磁性传感器等方面的广泛应用前景 ,引起了人们的极大关注．继多层膜之后 ,人们在金属颗粒膜如Ｃｏ Ａｇ［２］,Ｃｏ Ｃｕ［３,４］等中也相继发现了巨磁电阻效应．颗粒膜是微颗粒镶嵌于薄膜中所构成的复合材料体系．原则上 ,颗粒的组成与薄膜的组成在制备条件上应互不固溶 ,因此颗粒膜区别于合金、化合物 ,属于非均匀相组成的材料．磁性颗粒膜是磁性粒子分布在非磁性金属材料薄膜中．在磁性颗粒与非…     

微波辅助化学浴快速沉积Eu:YVO4薄膜

应用简单有效的微波辐射辅助化学浴技术快速沉积了Eu：YVO4纳米颗粒膜．所沉积的Eu：YVO4薄膜均匀、密实、镜面．产物用x射线衍射仪、原子力显微镜、紫外分光光度计和荧光分光光度计进行测试、表征和分析．结果表明所得Eu：YVO4薄膜由纳米颗粒组成,具有高的(200)择优取向,结晶性良好,在紫外光激发下具有良好的荧光发射性能．     

LB技术制备双(对甲苯磺酸)-2,4-己二炔-1,6-二醇酯及其聚合物的沉积薄膜

<正> LB(Langmuir-Blodgett)技术是人为排列分子的一项技术。由LB技术制备的LB膜高度规整又极薄,有望在微电子学(分子电子器件)和集成光学(非线性光学器件)等高技术领域中得到应用。本文利用LB技术制备了端头不具备亲水基团的双(对甲苯磺酸)-2,4-己二炔-1,6-二醇酯(TS)的沉积薄膜,用X-射线衍射研究了TS及其聚合物PTS沉积薄膜的分子排列情况。     

酞菁铜阴阳离子分子沉积(MD)膜润湿性研究

酞菁及其衍生物等大环平面分子具有良好的化学稳定性和优异的光电性能 [1,2 ] ,利用酞菁进行模拟生物光合作用的研究 ,以期实现新的光电转换技术 ,近年来已引起人们的广泛重视[3～ 5] .分子沉积(MD)超薄膜[6～ 8] 是以阴阳离子间静电相互作用为成膜驱动力 ,通过相反离子体系的单层交替沉积制备的层状有序超薄膜 .分子沉积技术广泛应用在固体表面改性和生物传感技术等领域 ,沉积分子的物理化学性质是影响其应用的主要因素 .本文通过紫外 -可见光谱跟踪了酞菁铜阴阳离子 MD膜的均匀沉积 ,并根据酞菁 MD膜表面接触角的变化 ,探讨分子端基的…     

Sr^2＋对Li0.2375＋xLa0.5875-xSrxTiO3^-LaPO4体系的性能的影响

利用循环电位沉积法从非水体系中制备了Yb-Bi薄膜。在这一沉积过程中，基体电位是在两个电位之间连续循环的。研究了沉积电位、沉积时间和扫描速率对沉积膜中Yb含量以及表面形态的影响。实验结果表明，在0．10mol．L^-1Ybcl3 0．10mol．L^-1Bi(N03)3 0．10mol．L^-1LiCl DMSO体系中，当控制恰当的沉积条件，可得到表面黑色、均匀、有金属光泽和附着力强的非晶态Yb-Bi薄膜，其中Yb的质量分数可达21．04％～36．36％(质量分数)，所得到的沉积膜通过SEM，EDS和XRD进行了表征。     

循环电位沉积Yb-Bi薄膜

利用循环电位沉积法从非水体系中制备了Yb-Bi薄膜。在这一沉积过程中，基体电位是在两个电位之间连续循环的。研究了沉积电位、沉积时间和扫描速率对沉积膜中Yb含量以及表面形态的影响。实验结果表明，在0．10mol．L^-1Ybcl3 0．10mol．L^-1Bi(N03)3 0．10mol．L^-1LiCl DMSO体系中，当控制恰当的沉积条件，可得到表面黑色、均匀、有金属光泽和附着力强的非晶态Yb-Bi薄膜，其中Yb的质量分数可达21．04％～36．36％(质量分数)，所得到的沉积膜通过SEM，EDS和XRD进行了表征。     

低温熔盐中电沉积Sm-Co合金膜及其磁性能

在353 K的尿素-乙酰胺-NaBr-KBr熔体中, 用恒电位电解法在Cu基片上制备了Sm-Co合金膜. 利用循环伏安法研究了熔体的电化学行为. 电化学实验结果表明, 在Pt电极上, Co(II)+2e→Co(0)是一步完全的不可逆反应; 测得CoCl2-尿素-乙酰胺-NaBr-KBr熔体中, Co(II)在Pt电极上的传递系数α=0.31, 扩散系数D0=4.78×10^-5 cm2·s-1; Sm(III)难以单独沉积, 但能被Co(II)诱导共沉积, 在不同阴极电位下制备出不同Sm含量的非晶合金膜. 用等离子发射光谱仪(ICP)检测薄膜成分, 用SEM观察了薄膜的表面形貌结构, 用XRD和振动样品磁强计(VSM)分析样品退火前后的晶相和磁性能变化特征. 结果表明, 在923 K进行退火30 s后Sm-Co薄膜由非晶转变为多晶结构, 并以hcp晶相结构为主; 退火和Sm含量对Sm-Co合金膜的磁性能有重要的影响.     

聚苯胺-TCNQ复合薄膜的微观结构与电学特性

聚苯胺 (ＰＡＮＩ)作为高聚物材料 ,具有稳定性好 ,易于合成等优点．它在化学传感器、显示器、光化学电池等光电器件上有着许多潜在的应用前景．目前导电聚苯胺材料的合成、薄膜的制备与表征正在受到人们的重视．由于聚苯胺很难溶于一般的有机溶剂 ,用化学方法通过聚合物溶液用旋涂或自组装的方法成膜具有很大的局限性 ,特别是不易得到实用化的薄膜产物．而用真空蒸发沉积方法制备聚苯胺薄膜却有成膜质量高、易于控制 ,能很好与电子及微电子加工工艺相接轨等优点［１ -３］．国外已有一些关于真空蒸发沉积聚苯胺薄膜的研究报导［２ -５］,但…     

三氧化钨与双季铵盐超薄有序分子沉积膜的制备及其结构研究

分子沉积膜(moleculardepositionfilms)简称MD膜,是近十年才得到研究并迅速发展起来的一类新的自组装超薄膜[1].     

利用Fe3O4/DR膜作为催化剂前体在硅片上生长多壁碳纳米管

Fe3O4纳米粒子与正离子性的重氮树脂在硅基底的表面形成稳定自组装膜,还原后可通过化学气相沉积(CVD)法在硅基底的表面生长多壁碳纳米管.以聚丙烯酸包裹Fe3O4纳米颗粒能够有效地防止纳米粒子的团聚,并提高组装效率,得到均匀的纳米粒子自组装膜,从而获得在硅基底上均匀分布的多壁碳纳米管.     

Polyoxometalate monolayers in Langmuir-Blodgett films

Langmuir and Langmuir-Blodgett (LB) films of a variety of polyoxometalates of different shapes, sizes, and charges were prepared by taking advantage of the adsorption properties of these polyanions on a positively charged monolayer of an organic surfactant spread on water. Three different aspects were investigated. 1) The electrochemical and electrochromic properties of LB films containing the easily reducible polyoxoanion [P2Mo18O62]6-. Absorbance changes of these LB films deposited onto an ITO substrate have been induced by repeated switching of the applied potential. These changes are due to the formation of the colored reduced forms of the polyanion. Coloration and bleaching of the LB film occur very quickly and are reversible. 2) The preparation of LB films based on magnetic polyoxometalates, such as the Keggin anions, [CoW12O40]6- and [SiMn(OH2)W11O39]6-, or containing magnetic clusters of increasing nuclearities such as [Co4(H2O)2(PW9O34)2]10- and [Co4(H2O)2(P2W15O62)2]16- based on a Co4O16 ferromagnetic cluster, and the polyoxometalates [Co9(OH)3(H2O)6(HPO4)2(PW9O34)3]16- and [Ni9(OH)3-(H2O)6(HPO4)2(PW9O34)3]16- based on a nonanuclear M9O36 cluster. 3) The preparation of LB films of the giant heteropolyoxomolybdate, [Na3(NH4)12][Mo57Fe6(NO)6O174(OH)3-(H2O)24]76 H2O.     

NMR studies of water in polyimide films

Commercial polyimide films containing up to ～ 3 wt % water have been studied by proton, deuteron, and oxygen-17 nuclear magnetic resonance (NMR). Comparisons between NMR results and previous dielectric relaxation (DR) results for a variety of Kapton films show that there is a one-to-one correspondence between specific dielectric loss peaks and features of the ²H or ¹⁷O NMR spectra. It is concluded that water molecules, which interact only weakly with the polymer, reside in the polyimide matrix in two configurations, randomly oriented single molecules and chains of water molecules oriented perpendicular to the plane of the film. The correspondence between NMR and DR observed in water in Kapton extends to water in Upilex and to methanol and acetic acid in Kapton. © 1995 John Wiley & Sons, Inc.     

Fabrication of photosensitive multilayer films based on polyoxometalate and diazoresin

A novel photosensitive organic-inorganic composite film incorporating polyoxometalate, K7[SiW11O39Co(H3P2O7)] (SiW11CoPP), and diazoresin (DR) has been prepared via layer-by-layer (LBL) self-assembly. Under UV irradiation, followed the decomposition of diazonium in DR, the ionic bonds between the adjacent interfaces of the multilayer film convert to covalent bonds. The LBL multilayers were characterized by UV-vis spectroscopy, X-ray photoelectron spectra (XPS), atomic force microscopy (AFM), FTIR spectrum, cyclic voltammograms (CV), and electron spin resonance (ESR) measurements. UV spectroscopy shows that the deposition process is regular and highly reproducible from layer to layer. XPS spectra confirm the incorporation of DR and SiW(11)CoPP into the films. Atomic force microscopy image indicates that the film surface is uniform and smooth. Solvent etching experiment proves that the film has significant stability towards polar solvent. Electrochemical behavior of the multilayers is investigated.     

Stable thin films and hollow spheres composing chiral polyaniline composites

Chiral polyaniline composite (CPAC) thin films were fabricated by self-assembly using diazoresin (DR) and CPAC. The weak linkage between the DR and CPAC of the film will convert to covalent bonds under UV irradiation or heating, and the thin film becomes very stable toward polar solvents and electrolyte aqueous solutions. Core-shell particles with stable DR/CPAC shell and polystyrene (PS) core can be prepared by similar methods. After the PS core is removed by chemical etching, stable DR/CPAC hollow spheres were obtained. Circular dichroism spectra and cyclic voltammetry measurements show that the DR/CPAC thin films are chirally active and possess good electrochemical stability.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

Electrocatalytic and magnetic properties of ultrathin nanostructured iron-melanin films on Au(111)

We have prepared ultrathin, nanostructured melanin films on Au(111) by means of electrochemical self-assembly. These films were characterized by using Auger electron spectroscopy, X-ray absorption near-edge structure spectroscopy, scanning tunneling microscopy, magnetic force microscopy, and electrochemical techniques. Two types of nanostructures are present in the film: melanin nanoparticles and Fe(3)O(4) nanoparticles. The melanin nanoparticles contain Fe bonded to oxygen-containing phenolic groups in an octahedral configuration similar to that found in Fe(2)O(3). The inorganic-organic composite exhibits magnetic properties and catalyzes the electroreduction of hydrogen peroxide in alkaline and neutral electrolyte solutions. The electrocatalytic activity depends on the Fe-bound melanin and appears to be similar to that found for Fe-porphyrins.     

Optical and physical properties of cobalt oxide films electrogenerated in bicarbonate aqueous media

For the first time, cobalt oxide films that are highly protective against localized corrosion and depicting a wide variety of bright and uniform colors due to light interference, have been successfully electrogenerated on polycrystalline cobalt disk electrodes under potentiostatic polarization in a mild aqueous bicarbonate medium. Open circuit potential measurements have shown the formation of a film with a bilayered structure, organized as a thin Co3O4 outer layer and a thick CoO inner layer. The existence of Co3O4 as a thin outer layer, previously postulated from galvanostatic reduction experiments, has been confirmed from XPS analysis. Raman spectroscopy, performed using a very low laser intensity, has shown that the films are mainly composed of CoO. The broadness of the Raman bands observed is associated to the amorphous character of the film, a result that has been confirmed by spectroscopic ellipsometry and X-ray diffraction analysis. Overall film thicknesses, well controlled by the anodization duration, were determined and correlated using mechanical (atomic force microscopy and profilometry) and spectroscopic (specular UV-vis-NIR reflectance and ellipsometry) techniques. Spectroscopic ellipsometry, using a simple amorphous dispersion model, has proved efficient for measuring thicknesses of films ranging from 31 to 290 nm with very low standard deviations. The real part of the complex refractive indices of these films, ranging from 1.8 to 2.2 (at lambda = 632.8 nm) depending on the anodization duration, is in good agreement with values reported in the literature for CoO. The film with the highest refractive index, and consequently the more densely packed structure, was obtained following a 30-minute anodization period.     

Photoalignment of liquid crystals by a covalently attached self-assembled ultrathin film

In this paper, the polyanion-containing cinnamoyl group (PACSS-CF3) was self-assembled with diazoresin (DR) to form a kind of stable covalent ultrathin film by irradiation with 365?nm UV light. The photoalignment properties of the DR/PACSS-CF₃ covalent film were investigated. The covalent film was found to have anisotropy after irradiation by 297?nm linearly polarised ultraviolet light (LPUVL), and could induce uniform alignment of liquid crystals (LCs). The pretilt angle of the LC was 2.5°. The stability of the film was enhanced by the covalent bonds. The films were thermally stable to 180°C. Polarised UV-Vis spectroscopy was utilised to investigate the photochemical process of the covalent film. It was found that cinnamoyl moieties parallel to the polarisation direction of the LPUVL were consumed by the photoreaction faster than those perpendicular to the polarisation direction. It can be concluded that the selective photoreaction induced the anisotropy of the films. The anisotropic films induced the homogeneous alignment of LC.     

Growth of iron cobalt oxides by atomic layer deposition

Thin films of iron cobalt oxides with spinel-type structure are made by the atomic layer deposition (ALD) technique using Fe(thd)3 (Hthd = 2,2,6,6-tetramethylheptane-3,5-dione), Co(thd)2, and ozone as precursors. Pulse parameters for ALD-type growth are established and such growth can be achieved at deposition temperatures between 185 and 310 degrees C. Films have been deposited on amorphous soda-lime glass and single-crystalline substrates of Si(100), MgO(100), and alpha-Al2O3(001) which all provide crystalline films, but with various orientations and crystallite sizes. Application of an external magnetic field during the film growth does not influence film growth characteristics (growth rate, crystallinity, topography etc.). Magnetization data are reported for phase-pure films of spinel-type structure with composition Fe2CoO4.