表面修饰CdS和(CdS)ZnS纳米晶的性能研究

在水相中合成了CdS纳米微粒,以ZnS对其进行表面修饰,得到具有核壳结构的(CdS)ZnS水溶性纳米晶。采用红外光谱、X射线衍射(XRD)、透射电镜(TEM)表征其粒度和形貌,紫外-可见吸收光谱(UV)、荧光光谱表征其光学特性。制得的CdS近似呈球形,直径为8nm;CdS纳米颗粒表面经ZnS修饰后,其荧光发射峰强度显著增强,表面态发射减弱。     

巯萘剂表面修饰的CdS纳米微粒的合成及发光特性

用疏萘剂(TN)作为表面修饰剂,在甲醇溶液中合成了CdS/TN纳米微粒,用TEM测得纳米微粒呈球形,其粒径约10nm,吸收光谱和荧光光谱研究表明,[S^2-]/[TN]浓度比、TN和镉离子的浓度对CdS/TN纳米微粒的粒径及发光特性具有显著影响,且随着条件的改变,CdS/TN纳米微粒的发射波长红移100nm,表现出明显的量子尺寸特性.XPS显示所制得表面修饰纳米微粒的核为CdS.     

CdS/TiO2复合纳米微粒的原位合成及性质研究

采用一种新方法,在TiO₂表面原位合成CdS纳米微粒,并用红外光谱跟踪了CdS/TiO₂复合纳米微粒的形成过程.紫外吸收光谱研究表明TiO₂对CdS纳米微粒的形成有很好的稳定作用,荧光光谱研究结果表明,这种纳米异质结构有着良好的电荷分离.     

聚乙烯烷酮修饰CdS纳米微粒的制备及其光电转移特性

以聚乙烯烷酮（PVP）为修饰剂,制备了CdS纳米微粒。实验结果表明PVP与CdS纳米微粒间存在着强的相互作用,PVP和CdS纳米微粒的荧光都在很大程度上发生淬灭。其原因在于作为修饰剂的PVP与CdS纳米微粒子间发生了特殊缔合．受激时形成共振激发态,电子能量弛豫被延迟。     

用硫脲分子表面修饰的CdS纳米粒子的合成和表征

报道了用硫脲分子进行表面化学修饰的CdS纳米粒子的合成方法,并引入了AOT(磺基琥珀酸双-2-乙基己基酯钠盐)作为平衡反离子,进一步对CdS表面作了修饰,增加了CdS纳米粒子在有机溶剂中的稳定性和可分散性。我们还探讨了温度、浓度、pH等因素对合成的影响,并通过TEM、XRD、FT-IR等手段对产物结构进行了表征。所得微粒粒径为5 nm左右,呈球形,硫脲分子与CdS纳米粒子富Cd²⁺表面通过形成Cd-S配位键而修饰在粒子表面。这种表面修饰的CdS纳米粒子将在非线性光学及自组装方面具有优     

P3HT修饰一维有序壳核式CdS/ZnO纳米棒阵列复合膜的光电化学性能

采用电化学方法在铟锡氧化物(ITO)导电玻璃上制备了高度有序的ZnO纳米棒阵列, 在ZnO纳米棒阵列上先后电化学沉积CdS纳米晶膜及聚3-己基噻吩(P3HT)薄膜得到P3HT修饰的一维有序壳核式CdS/ZnO纳米阵列结构, 并通过扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、能量散射X射线(EDX)等表征手段证实了该结构的形成. 以此纳米结构薄膜为光阳极组装新型半导体敏化太阳电池, 研究了CdS纳米晶膜的厚度和P3HT薄膜的沉积对电池光伏性能的影响, 初步探讨了电荷在电池结构中的传输机理, 结果表明, CdS纳米晶膜和P3HT薄膜的沉积有效地拓宽了光阳极的光吸收范围, 实验中电池的光电转换效率最高达到1.08%.     

ZnO/CdS复合材料的合成与可见光催化性能

采用喷雾辅助气相沉积法在水热法合成的ZnO纳米线上沉积CdS纳米颗粒。采用X射线衍射仪（XRD）、激光拉曼仪（Raman）、扫描电镜（SEM）、透射电镜（TEM）、X射线光电子能谱分析谱（XPS）和紫外可见漫反射光谱等测试手段对复合光催化剂进行表征。结果表明,3~10 nm的CdS纳米粒子修饰在直径约为100 nm ZnO纳米线的表面。XPS和Raman表明复合材料中ZnO和CdS之间存在化学相互作用。可见光催化降解罗丹明B实验结果表明ZnO/CdS复合材料的催化性能优于单相CdS或ZnO,沉积时间为30 s合成的ZnO/CdS速率常数分别是CdS和ZnO的2.91和4.03倍,且具有较高的稳定性。ZnO/CdS复合材料光催化性能增强的可能原因为光吸收范围的拓展和光生载流子分离效率的提高。     

表面修饰MnS纳米微粒的结构表征

采用表面修饰的方法 ,以双十八烷基二硫代磷酸盐 (PyDDP)为表面修饰剂 ,制备了双十八烷氧基二硫代磷酸 (DDP)表面修饰的MnS纳米微粒。采用TEM ,DSC ,XRD和FTIR对表面修饰MnS纳米微粒进行结构分析。结果表明 :表面修饰MnS纳米微粒是由DDP表面修饰层和MnS纳米核心所构成 ,微粒尺寸在 5～ 10nm之间 ,无机MnS纳米晶核具有 γ MnS的晶型结构。DDP表面修饰MnS纳米微粒在氯仿、苯和甲苯等有机溶剂中都具有良好的分散性。     

四硫富瓦烯四硫醇盐对纳米硫化物表面的修饰

本文报道用四硫富瓦烯四硫醇盐(TTFS₄^4-，简写TTFS₄)修饰CdS、NiS的纳米微粒的方法，通过TEM、FT-IR等手段对修饰的纳米微粒进行了表征。实验发现CdS/TTFS₄的固体荧光强度随着修饰量的增加而逐渐减弱。表面修饰后的CdS和NiS的电导率比修饰前都有提高，后者更为明显。     

表面修饰LaF_3纳米微粒的制备及表征

在水醇混合介质中采用同阳离子共沉淀表面修饰法制备了有机化合物表面修饰的LaF3纳米微粒 ,研究了它的摩擦学特性。采用多种分析手段表征了表面修饰LaF3纳米微粒的结构 ,并在四球摩擦试验机上考察其润滑性能。结果表明 ,表面修饰LaF3纳米微粒不仅在有机溶剂中具有良好的分散性 ,同时也显示出良好的减摩、抗磨和承载性能。     

Surface-Modified CdS/ZnO Material: Single-Reactor Synthesis and Mechanism of Formation in Aqueous Solution

Method of chemical precipitation from aqueous solutions was used to cover the surface of polycrystalline ZnO nanotubes with a nanostructured CdS layer. The thus synthesized CdS/ZnO composite material was studied by the methods of X-ray diffraction analysis, electron microscopy, and optical spectroscopy. The fundamental time-related aspects of the process of CdS formation on the ZnO surface were examined. It was found that the amount of deposited CdS nanoparticles is independent of the deposition duration. The morphological specific features of ZnO nanotubes are preserved upon a prolonged keeping of ZnO in solution. The photocatalytic activity of CdS/ZnO under visible and UV light was examined in the reaction of hydroquinone oxidation. A possible mechanism of how the CdS/ZnO composite is formed in an aqueous solution in the course of growth of a layer constituted by CdS nanoparticles on the surface of ZnO nanotubes is suggested on the basis of the experimental data. It is demonstrated that the chemical-precipitation method can be used to obtain surface-active composite materials that are photoactive in the visible spectral range.     

A simple CdS nanoparticles cascading approach for boosting N3 dye/ZnO nanoplates DSSCs overall performance

Enhanced photosensitization in presence of CdS nanoparticles is achieved in electrochemically deposited ZnO nanoplates and N3 loaded dye-sensitized solar cells. Chemically embedded CdS nanoparticles act as a sandwiching layer between ZnO nanoplates and dye molecules by overcoming current limiting serious Zn²⁺/dye insulating complex formation and CdS photo-corrosion issues. The X-ray diffraction and the scanning electron microscopy confirm the ZnO with vertically aligned nanoplates, perpendicular to the substrate surface. Amorphous CdS is monitored using electron dispersive X-ray analysis. The low and high resolution transmission electron microscope images confirm the presence of CdS nanoparticles over ZnO nanoplates which later is supported by an increase in optical absorbance and shift in band edge. About 400% increase in solar conversion efficiency with this cascade arrangement is achieved when compared with without CdS which could be fascinating while designing solid state solar cells in presence of suitable p-type layer.     

CdS/ZnO异质结构材料的光生电荷性质

本文制备了CdS/ZnO异质结构材料, 并以此为模型体系, 利用表面光伏技术研究了其光电性质, 结果表明, 利用表面光伏相位谱和瞬态光伏技术可以更进一步了解异质界面的光生电荷行为.     

水溶性CdSe/CdS量子点的合成及其与牛血清蛋白的共轭作用

用巯基乙酸(TGA)作为稳定剂，合成了水溶性的CdSe和核壳结构的CdSe/CdS半导体量子点。吸收光谱和荧光光谱研究表明，核壳结构的CdSe/CdS半导体量子点比单一的CdSe量子点具有更优异的发光特性。用TEM、电子衍射(ED)和XPS分别表征了CdSe和CdSe/CdS纳米微粒的结构、形貌及分散性。红外光谱和核磁共振谱证实了巯基乙酸分子中的硫原子和氧原子与纳米微粒表面的金属离子发生了配位作用。在pH值为7.4的条件下，将合成的CdSe和CdSe/CdS量子点直接与牛血清白蛋白(BSA)相互作用。实验发现，两种量子点均对BSA的荧光产生较强的静态猝灭作用；而BSA对两种量子点的荧光则具有显著的荧光增敏作用，存在BSA时CdSe/CdS量子点的荧光增强是不存在BSA时体系荧光强度的3倍。     

CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A sandwiched structure of CdS/Ag/ZnO nanorod photoanode exhibits greatly enhanced photoelectrochemical activity for solar hydrogen generation, due to synergistic effect of CdS nanocrystallites and plasmonic Ag nanoparticles for the enhanced optical absorption and the promoted charge carrier separation.     

CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A novel architecture of CdS/ZnO nanorods with plasmonic silver (Ag) nanoparticles deposited at the interface of ZnO nanorods and CdS nanocrystallites, was designed as a photoanode for solar hydrogen generation, with photocurrent density achieving 4.7 mA/cm² at 1.6 V (vs. RHE), which is 8 and 1.7 times as high as those of pure ZnO and CdS/ZnO nanorod films, respectively. Additionally, with optical absorption onset extended to ～660 nm, CdS/Ag/ZnO nanorod film exhibits significantly increased incident photo-to-current efficiency (IPCE) in the whole optical absorption region, reaching 23.1% and 9.8% at 400 nm and 500 nm, respectively. The PEC enhancement can be attributed to the one-dimensional ZnO nanorod structure maintained for superior charge transfer, and the extended visible-light absorption of CdS nanocrystallites. Moreover, the incorporated plasmonic Ag nanoparticles could further promote the interfacial charge carrier transfer process and enhance the optical absorption ability, due to its excellent plasmon resonance effect.     

Photocatalytic formation of porous CdS/ZnO nanospheres and CdS nanotubes

It was found that ZnO nanocrystals have photocatalytic activity in the formation of CdS during the reduction of sulfur in the presence of cadmium acetate. It was shown that mesoporous spheres measuring 150–170 nm and consisting of CdS/ZnO particles measuring 5–8 nm are formed during the irradiation of ZnO particles measuring 5.5 nm. During the photodeposition of CdS by the action of light on nanorods produced by ultrasonic treatment of microcrystalline zinc oxide nanotubes of CdS 0.5–0.8 μm in length and 15–110 nm in internal diameter are formed. A mechanism, in which they appear at the ends of the ZnO nanorods and grow on the surface of the CdS/ZnO heterojunction, is proposed for the formation of the CdS nanotubes. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 4, pp. 215–219, July–August, 2007.     

High-efficiency cascade CdS/CdSe quantum dot-sensitized solar cells based on hierarchical tetrapod-like ZnO nanoparticles

Quantum dot-sensitized solar cells (QDSCs) constructed using cascade CdS/CdSe sensitizers and the novel tetrapod-like ZnO nanoparticles have been fabricated. The cascade co-sensitized QDSCs manifested good electron transfer dynamics and overall power conversion efficiency, compared to single CdS- or CdSe-sensitized cells. The preliminary CdS layer is not only energetically favorable to electron transfer but behaves as a passivation layer to diminish the formation of interfacial defects during CdSe synthesis. On the other hand, the anisotropic tetrapod-like ZnO nanoparticles, with a high electron diffusion coefficient, can afford a better carrier transport than traditional ZnO nanoparticles. The resultant solar cell yielded an excellent performance with a solar power conversion efficiency of 4.24% under simulated one sun (AM1.5G, 100 mW cm(-2)) illumination.