Photoinduced Bioorthogonal 1,3‐Dipolar Poly‐cycloaddition Promoted by Oxyanionic Substrates for Spatiotemporal Operation of Molecular Glues

PGlue^PZ, a pyrazoline (PZ)‐based fluorescent adhesive which can be generated spatiotemporally in living systems, was developed. Since PGlue^PZ carries many guanidinium ion (Gu⁺) pendants, it strongly adheres to various oxyanionic substrates through a multivalent salt‐bridge interaction. PGlue^PZ is given by bioorthogonal photopolymerization of a Gu⁺‐appended monomer (Glue^TZ), bearing tetrazole (TZ) and olefinic termini. Upon exposure to UV light, Glue^TZ transforms into a nitrileimine (NI) intermediate (Glue^NI), which is eligible for 1,3‐dipolar polycycloaddition. However, Glue^NI in aqueous media can concomitantly be deactivated into Glue^WA by the addition of water, and the polymerization hardly occurs unless Glue^NI is concentrated. We found that, even under high dilution, Glue^NI is concentrated on oxyanionic substrates to a sufficient level for the polymerization, so that their surfaces can be point‐specifically functionalized with PGlue^PZ by the use of a focused beam of UV light.     

A faux hawk fullerene with PCBM-like properties

Reaction of C₆₀, C₆F₅CF₂I, and SnH(n-Bu)₃ produced, among other unidentified fullerene derivatives, the two new compounds 1,9-C₆₀(CF₂C₆F₅)H (1) and 1,9-C₆₀(cyclo-CF₂(2-C₆F₄)) (2). The highest isolated yield of 1 was 35% based on C₆₀. Depending on the reaction conditions, the relative amounts of 1 and 2 generated in situ were as high as 85% and 71%, respectively, based on HPLC peak integration and summing over all fullerene species present other than unreacted C₆₀. Compound 1 is thermally stable in 1,2-dichlorobenzene (oDCB) at 160 °C but was rapidly converted to 2 upon addition of Sn₂(n-Bu)₆ at this temperature. In contrast, complete conversion of 1 to 2 occurred within minutes, or hours, at 25 °C in 90/10 (v/v) PhCN/C₆D₆ by addition of stoichiometric, or sub-stoichiometric, amounts of proton sponge (PS) or cobaltocene (CoCp₂). DFT calculations indicate that when 1 is deprotonated, the anion C₆₀(CF₂C₆F₅)^– can undergo facile intramolecular S_NAr annulation to form 2 with concomitant loss of F^–. To our knowledge this is the first observation of a fullerene-cage carbanion acting as an S_NAr nucleophile towards an aromatic C–F bond. The gas-phase electron affinity (EA) of 2 was determined to be 2.805(10) eV by low-temperature PES, higher by 0.12(1) eV than the EA of C₆₀ and higher by 0.18(1) eV than the EA of phenyl-C₆₁-butyric acid methyl ester (PCBM). In contrast, the relative E _1/2(0/–) values of 2 and C₆₀, –0.01(1) and 0.00(1) V, respectively, are virtually the same (on this scale, and under the same conditions, the E _1/2(0/–) of PCBM is –0.09 V). Time-resolved microwave conductivity charge-carrier yield × mobility values for organic photovoltaic active-layer-type blends of 2 and poly-3-hexylthiophene (P3HT) were comparable to those for equimolar blends of PCBM and P3HT. The structure of solvent-free crystals of 2 was determined by single-crystal X-ray diffraction. The number of nearest-neighbor fullerene–fullerene interactions with centroid···centroid (⊙···⊙) distances of ≤10.34 Å is significantly greater, and the average ⊙···⊙ distance is shorter, for 2 (10 nearest neighbors; ave. ⊙···⊙ distance = 10.09 Å) than for solvent-free crystals of PCBM (7 nearest neighbors; ave. ⊙···⊙ distance = 10.17 Å). Finally, the thermal stability of 2 was found to be far greater than that of PCBM.     

Experimental observation of TiN12 + cluster and theoretical investigation of its stable and metastable isomers

TiN_n ⁺ clusters were generated by laser ablation and analyzed experimentally by mass spectrometry. The results showed that the mass peak of the TiN₁₂ ⁺ cluster is dominant in the spectrum. The TiN₁₂ ⁺ cluster was further investigated by photodissociation experiments with 266, 532 and 1064 nm photons. Density functional calculations were conducted to investigate stable structures of TiN₁₂ ⁺ and the corresponding neutral cluster, TiN₁₂. The theoretical calculations found that the most stable structure of TiN₁₂ ⁺ is Ti(N₂)₆ ⁺ with O _h symmetry. The calculated binding energy is in good agreement with that obtained from the photodissociation experiments. The most stable structure of neutral TiN₁₂ is Ti(N₂)₆ with D _3d symmetry. The Ti–N bond strengths are greater than 0.94 eV in both Ti(N₂)₆ ⁺ and its neutral counterpart. The interaction between Ti and N₂ weakens the N–N bond significantly. For neutral TiN₁₂, the Ti(N₃)₄ azide, the N₅TiN₇ sandwich structure and the N₆TiN₆ structure are much higher in energy than the Ti(N₂)₆ complex. The DFT calculations predicted that the decomposition of Ti(N₃)₄, N₅TiN₇, and N₆TiN₆ into a Ti atom and six N₂ molecules can release energies of about 139, 857, and 978 kJ mol^–1 respectively.     

Cobalt-catalysed asymmetric hydrovinylation of 1,3-dienes

In the presence of bidentate 1,n-bis-diphenylphosphinoalkane-CoCl₂ complexes {Cl₂Co[P ∼ P]} and Me₃Al or methylaluminoxane, acyclic (E)-1,3-dienes react with ethylene (1 atmosphere) to give excellent yields of hydrovinylation products. The regioselectivity (1,4- or 1,2-addition) and the alkene configuration (E- or Z-) of the resulting product depend on the nature of the ligand and temperature at which the reaction is carried out. Cobalt(ii)-complexes of 1,1-diphenylphosphinomethane and similar ligands with narrow bite angles give mostly 1,2-addition, retaining the E-geometry of the original diene. Complexes of most other ligands at low temperature (–40 °C) give almost exclusively a single branched product, (Z)-3-alkylhexa-1,4-diene, which arises from a 1,4-hydrovinylation reaction. A minor product is the linear adduct, a 6-alkyl-hexa-1,4-diene, also arising from a 1,4-addition of ethylene. As the temperature is increased, a higher proportion of the major branched-1,4-adduct appears as the (E)-isomer. The unexpectedly high selectivity seen in the Co-catalysed reaction as compared to the corresponding Ni-catalysed reaction can be rationalized by invoking the intermediacy of an η⁴-[(diene)[P ∼ P]CoH]⁺-complex and its subsequent reactions. The enhanced reactivity of terminal E-1,3-dienes over the corresponding Z-dienes can also be explained on the basis of the ease of formation of this η⁴-complex in the former case. The lack of reactivity of the X₂Co(dppb) (X = Cl, Br) complexes in the presence of Zn/ZnI₂ makes the Me₃Al-mediated reaction different from the previously reported hydroalkenylation of dienes. Electron-rich phospholanes, bis-oxazolines and N-heterocyclic carbenes appear to be poor ligands for the Co(ii)-catalysed hydrovinylation of 1,3-dienes. An extensive survey of chiral ligands reveals that complexes of DIOP, BDPP and Josiphos ligands are quite effective for these reactions even at –45 °C and enantioselectivities in the range of 90–99% ee can be realized for a variety of 1,3-dienes. Cobalt(ii)-complex of an electron-deficient Josiphos ligand is especially active, requiring only <1 mol% catalyst to effect the reactions.     

Diaryldichalcogenide radical cations

One-electron oxidation of two series of diaryldichalcogenides (C₆F₅E)₂ (13a–c) and (2,6-Mes₂C₆H₃E)₂ (16a–c) was studied (E = S, Se, Te). The reaction of 13a and 13b with AsF₅ and SbF₅ gave rise to the formation of thermally unstable radical cations [(C₆F₅S)₂]˙⁺ (14a) and [(C₆F₅Se)₂]˙⁺ (14b) that were isolated as [Sb₂F₁₁]^– and [As₂F₁₁]^– salts, respectively. The reaction of 13c with AsF₅ afforded only the product of a Te–C bond cleavage, namely the previously known dication [Te₄]²⁺ that was isolated as [AsF₆]^– salt. The reaction of (2,6-Mes₂C₆H₃E)₂ (16a–c) with [NO][SbF₆] provided the corresponding radical cations [(2,6-Mes₂C₆H₃E)₂]˙⁺ (17a–c; E = S, Se, Te) in the form of thermally stable [SbF₆]^– salts in nearly quantitative yields. The electronic and structural properties of these radical cations were probed by X-ray diffraction analysis, EPR spectroscopy, and density functional theory calculations and other methods.     

Bis[pyrrolyl Ru(ii)] triads: a new class of photosensitizers for metal–organic photodynamic therapy

A new family of ten dinuclear Ru(ii) complexes based on the bis[pyrrolyl Ru(ii)] triad scaffold, where two Ru(bpy)₂ centers are separated by a variety of organic linkers, was prepared to evaluate the influence of the organic chromophore on the spectroscopic and in vitro photodynamic therapy (PDT) properties of the compounds. The bis[pyrrolyl Ru(ii)] triads absorbed strongly throughout the visible region, with several members having molar extinction coefficients (ε) ≥ 10⁴ at 600–620 nm and longer. Phosphorescence quantum yields (Φ_p) were generally less than 0.1% and in some cases undetectable. The singlet oxygen quantum yields (Φ_Δ) ranged from 5% to 77% and generally correlated with their photocytotoxicities toward human leukemia (HL-60) cells regardless of the wavelength of light used. Dark cytotoxicities varied ten-fold, with EC₅₀ values in the range of 10–100 μM and phototherapeutic indices (PIs) as large as 5400 and 260 with broadband visible (28 J cm^–2, 7.8 mW cm^–2) and 625 nm red (100 J cm^–2, 42 mW cm^–2) light, respectively. The bis[pyrrolyl Ru(ii)] triad with a pyrenyl linker (5h) was especially potent, with an EC₅₀ value of 1 nM and PI > 27 000 with visible light and subnanomolar activity with 625 nm light (100 J cm^–2, 28 mW cm^–2). The lead compound 5h was also tested in a tumor spheroid assay using the HL60 cell line and exhibited greater photocytotoxicity in this more resistant model (EC₅₀ = 60 nM and PI > 1200 with 625 nm light) despite a lower dark cytotoxicity. The in vitro PDT effects of 5h extended to bacteria, where submicromolar EC₅₀ values and PIs >300 against S. mutans and S. aureus were obtained with visible light. This activity was attenuated with 625 nm red light, but PIs were still near 50. The ligand-localized ³ππ* state contributed by the pyrenyl linker of 5h likely plays a key role in its phototoxic effects toward cancer cells and bacteria.     

Tetraarylborate polymer networks as single-ion conducting solid electrolytes

A new family of solid polymer electrolytes based upon anionic tetrakis(phenyl)borate tetrahedral nodes and linear bis-alkyne linkers is reported. Sonogashira polymerizations using tetrakis(4-iodophenyl)borate, tetrakis(4-iodo-2,3,5,6-tetrafluorophenyl)borate and tetrakis(4-bromo-2,3,5,6-tetrafluorophenyl)borate delivered highly cross-linked polymer networks with both 1,4-diethynylbeznene and a tri(ethylene glycol) substituted derivative. Promising initial conductivity metrics have been observed, including high room temperature conductivities (up to 2.7 × 10^–4 S cm^–1), moderate activation energies (0.25–0.28 eV), and high lithium ion transport numbers (up to t _Li⁺ = 0.93). Initial investigations into the effects of important materials parameters such as bulk morphology, porosity, fluorination, and other chemical modification, provide starting design parameters for further development of this new class of solid electrolytes.     

Breaking the barrier: an osmium photosensitizer with unprecedented hypoxic phototoxicity for real world photodynamic therapy

Hypoxia presents a two-fold challenge in the treatment of cancer, as low oxygen conditions induce biological changes that make malignant tissues simultaneously more aggressive and less susceptible to standard chemotherapy. This paper reports the first metal-based photosensitizer that approaches the ideal properties for a phototherapy agent. The Os(phen)₂-based scaffold was combined with a series of IP-nT ligands, where phen = 1,10-phenanthroline and IP-nT = imidazo[4,5-f][1,10]phenanthroline tethered to n = 0–4 thiophene rings. Os-4T (n = 4) emerged as the most promising complex in the series, with picomolar activity and a phototherapeutic index (PI) exceeding 10⁶ in normoxia. The photosensitizer exhibited an unprecedented PI > 90 (EC₅₀ = 0.651 μM) in hypoxia (1% O₂) with visible and green light, and a PI > 70 with red light. Os-4T was also active with 733 nm near-infrared light (EC₅₀ = 0.803 μM, PI = 77) under normoxia. Both computation and spectroscopic studies confirmed a switch in the nature of the lowest-lying triplet excited state from triplet metal-to-ligand charge transfer (³MLCT) to intraligand charge transfer (³ILCT) at n = 3, with a lower energy and longer lifetime for n = 4. All compounds in the series were relatively nontoxic in the dark but became increasingly phototoxic with additional thiophenes. These normoxic and hypoxic activities are the largest reported to date, demonstrating the utility of osmium for phototherapy applications. Moreover, Os-4T had a maximum tolerated dose (MTD) in mice that was >200 mg kg^–1, which positions this photosensitizer as an excellent candidate for in vivo applications.     

Hydration of guanidinium depends on its local environment

Hydration of gaseous guanidinium (Gdm⁺) with up to 100 water molecules attached was investigated using infrared photodissociation spectroscopy in the hydrogen stretch region between 2900 and 3800 cm^–1. Comparisons to IR spectra of low-energy computed structures indicate that at small cluster size, water interacts strongly with Gdm⁺ with three inner shell water molecules each accepting two hydrogen bonds from adjacent NH₂ groups in Gdm⁺. Comparisons to results for tetramethylammonium (TMA⁺) and Na⁺ enable structural information for larger clusters to be obtained. The similarity in the bonded OH region for Gdm(H₂O)₂₀ ⁺ vs. Gdm(H₂O)₁₀₀ ⁺ and the similarity in the bonded OH regions between Gdm⁺ and TMA⁺ but not Na⁺ for clusters with <50 water molecules indicate that Gdm⁺ does not significantly affect the hydrogen-bonding network of water molecules at large size. These results indicate that the hydration around Gdm⁺ changes for clusters with more than about eight water molecules to one in which inner shell water molecules only accept a single H-bond from Gdm⁺. More effective H-bonding drives this change in inner-shell water molecule binding to other water molecules. These results show that hydration of Gdm⁺ depends on its local environment, and that Gdm⁺ will interact with water even more strongly in an environment where water is partially excluded, such as the surface of a protein. This enhanced hydration in a limited solvation environment may provide new insights into the effectiveness of Gdm⁺ as a protein denaturant.     

Enzyme repurposing of a hydrolase as an emergent peroxidase upon metal binding

As an alternative to Darwinian evolution relying on catalytic promiscuity, a protein may acquire auxiliary function upon metal binding, thus providing it with a novel catalytic machinery. Here we show that addition of cupric ions to a 6-phosphogluconolactonase 6-PGLac bearing a putative metal binding site leads to the emergence of peroxidase activity (k_cat 7.8 × 10^–2 s^–1, K_M 1.1 × 10^–5 M). Both X-ray crystallographic and EPR data of the copper-loaded enzyme Cu·6-PGLac reveal a bis-histidine coordination site, located within a shallow binding pocket capable of accommodating the o-dianisidine substrate.     

Reductive Methylation of Homogeneous Primary β-Lauryl/myristyl 7/3 Polyethyleneoxy n = 3–18 Ethylamines under Phase-Transfer Catalysis Conditions

Homogeneous tertiary N,N-dimethyl-N-β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylamines, LM(EO)_nAT, are niche intermediates in the synthesis of homogeneous N-alkyl (C₁–C₁₈)-N,N-dimethyl-N-β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylammonium chlorides (unitary degree of oligomerization of ethylene oxide in the polyoxyethylene chain). This paper synthetically presents the dependence of the reductive methylation yields of homogeneous primary β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylamines, LM(EO)_nAP, on the reaction time (10–90 min), the temperature (70 °C), the molar ratio formic aldehyde /LM(EO)_nAP (1.1/1–2.5/1), the molar ratio HCOOH/LM(EO)_nAP (5/1), the degree of oligomerization of ethylene oxide in the homogeneous polyoxyethylene chain in the 3,6,9,12,18 series, and the structure of the phase-transfer catalysts. The steric effects of hydrophobic groups CH₃ and C₁₈H₃₇ grafted onto the ammonium function, and the micellar phenomena in the vicinity of their critical micellar concentration, directly proportional to the homogeneous degree of oligomerization, were highlighted. In all cases, a steady increase in reductive methylation yields was observed, with even quantitative values obtained. The high purity of the homologous series LM(EO)_nAT will allow their personalization as reference structures for the study of the evolution of basic colloidal characteristics useful in forecasting technological applications. LM(EO)_nAP were obtained either by direct amidoethylation (nucleophilic addition under basic catalysis of homogeneous lauryl/myristyl 7/3 polyethoxylated n = 3, 6, 9, 12, 18 alcohols, LM(EO)_nOH, to acrylamide monomer) or by cyanoethylation of LM(EO)_nOH under basic catalysis at 25–50 °C, in the presence of Fe²⁺ cations as oligomerization/polymerization inhibitor, followed by partial acid hydrolysis of homogeneous β-alkyl (C₁₂H₂₅/C₁₄H₂₉) 7/3 polyethyleneoxy n = 3, 6, 9, 12, 18 propionitriles, LM(EO)_nPN, to β-alkyl (C₁₂H₂₅/C₁₄H₂₉) 7/3 polyethyleneoxy n = 3, 6, 9, 12, 18 propionamides, LM(EO)_nPD, which led to LM(EO)_nAP by Hoffmann degradation. Homogeneous higher tertiary polyetheramines LM(EO)_nAT were structurally characterized.     

A comparative study of the coordination behavior of cyclo-P5 and cyclo-As5 ligand complexes towards the trinuclear Lewis acid complex (perfluoro-ortho-phenylene)mercury

Reactions of the cyclo-E₅ sandwich complexes [Cp*Fe(η⁵-P₅)] (1) and [Cp*Fe(η⁵-As₅)] (2) with the planar Lewis acid trimeric (perfluoro-ortho-phenylene)mercury [(o-C₆F₄Hg)₃] (3) afford compounds that show distinctly different assemblies in the solid state. The phosphorus containing ligand 1 forms dimeric coordination units with two molecules of 3, with one P atom of each cyclo-P₅ ligand positioned in close proximity to the center of a molecule of 3. In contrast to the coordination behavior of 1, the arsenic analog 2 shows simultaneous interaction of three As atoms with the Hg atoms of 3. A DFT study and subsequent AIM analyses of the products suggest that electrostatic forces are prevalent over donor–acceptor interactions in these adducts, and may play a role in the differences in the observed coordination behavior. Subsequently, a series of [Cp^RFe(η⁵-P₅)] (Cp^R = C₅H_5–n tBu_n, n = 1–3, 6a–c) sandwich complexes was prepared and also reacted with [(o-C₆F₄Hg)₃]. In the solid state the obtained products 7a–c with increasing steric demand of the Cp^R ligands show no significant change in their assembly compared to the Cp* analog 4. All of the products were characterized by single crystal X-ray structure analysis, mass spectrometry and elemental analysis as well as NMR spectroscopy and IR spectrometry.     

From TcVII to TcI; facile syntheses of bis-arene complexes [99(m)Tc(arene)2]+ from pertechnetate

Bis-arene complexes of technetium represent a fundamental class of organometallic compounds. Due to complex synthetic routes, no detailed insights into their properties have been reported so far. Reacting [⁹⁹TcO₄]^– with arenes in the exclusive presence of AlCl₃ gives highly stable [⁹⁹Tc(arene)₂]⁺ in good yields. These complexes have extraordinarily high stabilities, where oxidation is found to occur at potentials higher than +1.3 V and reduction at potentials below –2 V vs. Fc/Fc⁺. The ^99mTc analogues are similarly synthesised by applying a novel ionic liquid extraction pathway. Complexes of ^99mTc with suitably functionalized arenes will represent new building blocks for bioorganometallic pharmaceuticals in molecular imaging.     

Two dimensional inorganic electride-promoted electron transfer efficiency in transfer hydrogenation of alkynes and alkenes

A simple and highly efficient transfer hydrogenation of alkynes and alkenes by using a two-dimensional electride, dicalcium nitride ([Ca₂N]⁺·e^–), as an electron transfer agent is disclosed. Excellent yields in the transformation are attributed to the remarkable electron transfer efficiency in the electride-mediated reactions. It is clarified that an effective discharge of electrons from the [Ca₂N]⁺·e^– electride in alcoholic solvents is achieved by the decomposition of the electride via alcoholysis and the generation of ammonia and Ca(OⁱPr)₂. We found that the choice of solvent was crucial for enhancing the electron transfer efficiency, and a maximum efficiency of 80% was achieved by using a DMF mixed isopropanol co-solvent system. This is the highest value reported to date among single electron transfer agents in the reduction of C–C multiple bonds. The observed reactivity and efficiency establish that electrides with a high density of anionic electrons can readily participate in the reduction of organic functional groups.     

Targeting antioxidant pathways with ferrocenylated N-heterocyclic carbene supported gold(i) complexes in A549 lung cancer cells

Ferrocene containing N-heterocyclic carbene (NHC) ligated gold(i) complexes of the type [Au(NHC)₂]⁺ were prepared and found to be capable of regulating the formation of reactive oxygen species (ROS) via multiple mechanisms. Single crystal X-ray analysis of bis(1-(ferrocenylmethyl)-3-mesitylimidazol-2-ylidene)-gold(i) chloride (5) and bis(1,3-di(ferrocenylmethyl)imidazol-2-ylidene)-gold(i) chloride (6) revealed a quasi-linear geometry around the gold(i) centers (i.e., the C–Au–C bond angle were measured to be ∼177° and all the Au–C_carbene bonds distances were in the range of 2.00 (7)–2.03 (1) Å). A series of cell studies indicated that cell proliferation inhibition and ROS generation were directly proportional to the amount of ferrocene contained within the [Au(NHC)₂]⁺ complexes (IC₅₀ of 6 < 5 < bis(1-benzyl-3-mesitylimidazol-2-ylidene)-gold(i) chloride (4)). Complexes 4–6 were also confirmed to inhibit thioredoxin reductase as inferred from lipoate reduction assays and increased chelatable intracellular zinc concentrations. RNA microarray gene expression assays revealed that 6 induces endoplasmic reticulum stress response pathways as a result of ROS increase.     

Tuning the reactivity of mononuclear nonheme manganese(iv)-oxo complexes by triflic acid

Triflic acid (HOTf)-bound nonheme Mn(iv)-oxo complexes, [(L)Mn^IV(O)]²⁺–(HOTf)₂ (L = N4Py and Bn-TPEN; N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine and Bn-TPEN = N-benzyl-N,N′,N′-tris(2-pyridylmethyl)ethane-1,2-diamine), were synthesized by adding HOTf to the solutions of the [(L)Mn^IV(O)]²⁺ complexes and were characterized by various spectroscopies. The one-electron reduction potentials of the Mn^IV(O) complexes exhibited a significant positive shift upon binding of HOTf. The driving force dependences of electron transfer (ET) from electron donors to the Mn^IV(O) and Mn^IV(O)–(HOTf)₂ complexes were examined and evaluated in light of the Marcus theory of ET to determine the reorganization energies of ET. The smaller reorganization energies and much more positive reduction potentials of the [(L)Mn^IV(O)]²⁺–(HOTf)₂ complexes resulted in greatly enhanced oxidation capacity towards one-electron reductants and para-X-substituted-thioanisoles. The reactivities of the Mn(iv)-oxo complexes were markedly enhanced by binding of HOTf, such as a 6.4 × 10⁵-fold increase in the oxygen atom transfer (OAT) reaction (i.e., sulfoxidation). Such a remarkable acceleration in the OAT reaction results from the enhancement of ET from para-X-substituted-thioanisoles to the Mn^IV(O) complexes as revealed by the unified ET driving force dependence of the rate constants of OAT and ET reactions of [(L)Mn^IV(O)]²⁺–(HOTf)₂. In contrast, deceleration was observed in the rate of H-atom transfer (HAT) reaction of [(L)Mn^IV(O)]²⁺–(HOTf)₂ complexes with 1,4-cyclohexadiene as compared with those of the [(L)Mn^IV(O)]²⁺ complexes. Thus, the binding of two HOTf molecules to the Mn^IV(O) moiety resulted in remarkable acceleration of the ET rate when the ET is thermodynamically feasible. When the ET reaction is highly endergonic, the rate of the HAT reaction is decelerated due to the steric effect of the counter anion of HOTf.     

Extremely strong tubular stacking of aromatic oligoamide macrocycles

As the third-generation rigid macrocycles evolved from progenitor 1, cyclic aromatic oligoamides 3, with a backbone of reduced constraint, exhibit extremely strong stacking with an astoundingly high affinity (estimated lower limit of K _dimer > 10¹³ M^–1 in CHCl₃), which leads to dispersed tubular stacks that undergo further assembly in solution. Computational study reveals a very large binding energy (–49.77 kcal mol^–1) and indicates highly cooperative local dipole interactions that account for the observed strength and directionality for the stacking of 3. In the solid-state, X-ray diffraction (XRD) confirms that the aggregation of 3 results in well-aligned tubular stacks. The persistent tubular assemblies of 3, with their non-deformable sub-nm pore, are expected to possess many interesting functions. One such function, transmembrane ion transport, is observed for 3.     

Computational study of the mechanism and selectivity of ruthenium-catalyzed hydroamidations of terminal alkynes

Density functional theory calculations were performed to elucidate the mechanism of the ruthenium-catalyzed hydroamidation of terminal alkynes, a powerful and sustainable method for the stereoselective synthesis of enamides. The results provide an explanation for the puzzling experimental finding that with tri-n-butylphosphine (P(Bu)₃) as the ligand, the E-configured enamides are obtained, whereas the stereoselectivity is inverted in favor of the Z-configured enamides with (dicyclohexylphosphino)methane (dcypm) ligands. Using the addition of pyrrolidinone to 1-hexyne as a model reaction, various pathways were investigated, among which a catalytic cycle turned out to be most advantageous for both ligand systems that consists of: (a) oxidative addition, (b) alkyne coordination, (c) alkyne insertion (d) vinyl-vinylidene rearrangement, (e) nucleophilic transfer and finally (f) reductive elimination. The stereoselectivity of the reaction is decided in the nucleophilic transfer step. For the P(ⁿBu)₃ ligand, the butyl moiety is oriented anti to the incoming 2-pyrolidinyl unit during the nucleophilic transfer step, whereas for the dcypm ligand, steric repulsion between the butyl and cyclohexyl groups turns it into a syn orientation. Overall, the formation of E-configured product is favorable by 4.8 kcal mol^–1 (Δ^‡ GSDL) for the catalytic cycle computed with P(Bu)₃ as ancillary ligand, whereas for the catalytic cycle computed with dcypm ligands, the Z-product is favored by 7.0 kcal mol^–1 (Δ^‡ GSDL). These calculations are in excellent agreement with experimental findings.     

Cobalt diselenide nanobelts grafted on carbon fiber felt: an efficient and robust 3D cathode for hydrogen production

Design and fabrication of low-cost, highly efficient and robust three-dimensional (3D) hierarchical structure materials for electrochemical reduction of water to make molecular hydrogen is of paramount importance for real water splitting applications. Herein, a 3D hydrogen evolution cathode constructed by in situ growing of cobalt diselenide nanobelts on the surface of commercial carbon fiber felt shows exceptionally high catalytic activity with 141 mV overpotential to afford a current density of 10 mA cm^–2, and a high exchange current density of 5.9 × 10^–2 mA cm^–2. Remarkably, it also exhibits excellent catalytic stability, and could be used for more than 30 000 potential cycles with no decrease in the current density in 0.5 M H₂SO₄. This easily prepared 3D material with excellent electrocatalytic performance is promising as a realistic hydrogen evolution electrode.     

A hexanuclear gold carbonyl cluster

The hexanuclear gold carbonyl cluster [PPh₄]₂[Au₆(CF₃)₆Br₂(CO)₂] (4) has been obtained by spontaneous self-assembly of the following independent units: CF₃AuCO (1) and [PPh₄][Br(AuCF₃)₂] (3). The cyclo-Au₆ aggregate 4, in which the components are held together by unassisted, fairly strong aurophilic interactions (Au···Au ∼310 pm), exhibits a cyclohexane-like arrangement with chair conformation. These aurophilic interactions also result in significant ν(CO) lowering: from 2194 cm^–1 in the separate component 1 to 2171 cm^–1 in the mixed aggregate 4. Procedures to prepare the single-bridged dinuclear component 3 as well as the mononuclear derivative [PPh₄][CF₃AuBr] (2) are also reported.