首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
用模板法在氧化铟锡(ITO)电极上制备具有三维有序多孔结构的金掺杂纳米二氧化钛修饰电极(3DOM GTD/ITO),扫描电镜(SEM)结果表明,制备的修饰电极三维结构规整有序、孔径均一。将标记有二茂铁(Fc)的DNA探针修饰到3DOM GTD/ITO电极上构建了一种新的标记型DNA生物传感器,通过Fc在DNA探针杂交前后的电化学信号变化可识别目标靶序列。采用循环伏安(CV)、示差脉冲(DPV)和交流阻抗(EIS)等方法对DNA探针在电极表面的固定和杂交进行表征。实验结果表明,该DNA生物传感器可以成功地识别乳腺癌基因靶序列,Fc的氧化还原电流与靶序列浓度在8.0×10-7~1.0×10-5 mol/L范围内呈线性关系,线性相关系数为0.9908,检测限为5.2×10-7 mol/L。  相似文献   

2.
在玻碳电极(GCE)上采用循环伏安法电聚合硫堇(PTh)得到PTh/GCE修饰电极,并利用聚硫堇层共价结合和静电作用吸附金纳米粒子(AuNP′s)制得AuNP′s/PTh/GCE修饰电极。然后通过将ss-DNA/AuNP′s/PTh修饰电极置于cDNA杂交液中,于42℃杂交制得ds-DNA/AuNP′s/PTh修饰玻碳电极,实现了脱氧核糖核酸(DNA)探针在AuNP′s/PTh修饰的玻碳电极上的固定,制得DNA电化学生物传感器。在[Fe(CN)6]3-/4-溶液中采用微分脉冲伏安法(DPV)及交流阻抗谱技术(EIS)对DNA的固定和杂交进行了表征。试验结果表明:在1.0×10-10~1.0×10-6mol.L-1的浓度范围内,该传感器可对转基因植物外源基因草丁膦乙酰转移酶基因(PAT基因)片段进行检测,检出限(3s)为3.2×10-11mol.L-1。  相似文献   

3.
铂纳米颗粒修饰电化学DNA传感器检测大豆中转基因成分   总被引:2,自引:0,他引:2  
用电沉积方法将铂纳米颗粒修饰在玻碳电极表面,然后将花椰菜花叶病毒35S启动子ssDNA片段直接吸附在铂纳米颗粒上,制成特异的电化学DNA传感器。用扫描电子显微镜和循环伏安法对修饰铂纳米颗粒电极进行了表征。ssDNA探针与互补目的ssDNA杂交,以[Co(phen)3]3 (phen=1,10-Phe-nanthroline)为杂交指示剂,用方波伏安法进行检测,表现出良好的响应信号。与在裸玻碳电极上修饰的探针相比,测定目的基因的灵敏度显著提高。传感器对互补目的ssDNA检测的线性范围为2.14×10-9~2.14×10-7mol/L;检出限为1.0×10-9mol/L,与3个碱基错配的DNA序列杂交,观察不到明显的杂交信号。样品DNA经HindⅢ非限制性内切酶酶切后测定,杂交检测信号增大。用传感器检测含量不同的转基因大豆DNA和非转基因大豆DNA的混合溶液,杂交前后的电流差与转基因DNA的含量呈良好线性关系。连续5次测量含有100%转基因大豆DNA杂交后的电信号,相对标准偏差为5.89%,固定探针的电极再生后可重复使用8次。  相似文献   

4.
卜扬  杨清  孟琦  胡赢  黄杉生 《化学学报》2010,68(7):672-678
利用新型材料金纳米空球,通过层层修饰的技术,分别将壳聚糖、空壳纳米金、L-半胱氨酸、细胞色素c以及ssDNA探针修饰到玻碳电极表面,制备了一种新型的DNA生物传感器.以紫外及透射电子显微镜(TEM)表征了空壳纳米金,以循环伏安法、阻抗谱图等电化学方法研究了传感器的特性,通过原子力显微镜方法观察了该DNA生物传感器不同层之间的形态差异.结果表明,该修饰电极所吸附的ssDNA探针为1.672×10―10mol·cm-2.在指示剂柔红霉素的帮助下,DNA探针可与互补的DNA进行杂交,借此以微分脉冲伏安法测定DNA.  相似文献   

5.
柔红霉素修饰的纳米金电极的制备及其对DNA检测   总被引:7,自引:0,他引:7  
郑华  胡劲波  李启隆 《化学学报》2006,64(8):806-810
利用双硫醇分子作为连接剂, 将纳米金颗粒固定于金电极上, 用伏安法、紫外-可见光谱和电化学交流阻抗对其组装过程以及活性进行了表征. 制备的纳米金修饰电极用于DNA测定及其对DNA损伤的检测. DNA的检测限为 1.2×10-9 mol/L. 该法灵敏、简便.  相似文献   

6.
应用主客体分子识别技术构建一种无需固定DNA探针的电化学检测DNA的新方法。分别采用间甲基苯甲酸标记和金纳米颗粒标记的两段DNA探针,使用β-环糊精修饰电极对杂交结构进行识别和电化学检测。采用差分脉冲伏安法(DPV)实现对特定序列DNA的定量检测。在优化的条件下,该体系表现出良好的灵敏度和选择性,对特定序列DNA的检测限为1.8×10-13mol/L。  相似文献   

7.
功能化纳米金增强的DNA电化学检测和序列分析   总被引:6,自引:0,他引:6  
李金花  胡劲波 《化学学报》2004,62(20):2081-2088,F010
用冠以大量二茂铁的纳米金微粒 /抗生蛋白链菌素结合物为标记物 ,将其标记于生物素修饰的寡聚核苷酸片段上 ,制成了具有电化学活性和纳米金放大作用的DNA电化学生物传感器 .首先采用巯基DNA和巯基烷烃混合自组装膜制备了金修饰电极 ,将探针DNA分子固定在了电极表面 ,运用杂交原则结合靶点分子在电极表面形成了双螺旋的DNA链 ,然后借助抗生蛋白链菌素和生物素之间的强亲和作用 ,引入了功能化的纳米金 .通过伏安法测定了修饰在纳米金上的二茂铁的氧化还原电流 ,可以识别和测定溶液中互补的靶点DNA ,17 mer靶点DNA的浓度在 0 .0 0 1~ 10nmol/L范围内有线性关系 ,检测限可达 0 .75× 10 -12 mol/L .  相似文献   

8.
将棒状Sb2S3纳米粒子与Nafion聚合物在乙醇溶液中超声混合得到均匀的Sb2S3-Nafion纳米复合材料分散液。将该复合材料滴涂至玻碳电极(GCE)表面,得到稳定的Sb2S3-Nafion修饰电极。循环伏安和阻抗表征实验表明,由于Sb2S3的纳米尺寸效应及半导体效应,电极的电化学性能得到了极大的提高。采用PCl5为活化剂,将Nafion表面的磺酸基团酰氯化,再利用共价键合法将末端修饰氨基的大肠杆菌DNA特征序列固定到修饰电极表面,制备了一种新型的DNA电化学传感器。以亚甲基蓝(MB)为杂交指示剂,将制备的DNA电化学传感器应用于大肠杆菌基因目标序列检测,结果表明,该传感器对目标DNA具有较宽的动力学线性范围(1.0×10-12~1.0×10-7mol/L),检出限达到2.4×10-13mol/L。此外,选择性实验表明该传感器对互补序列、单碱基错配序列、三碱基错配序列和完全错配序列具有良好的识别能力。  相似文献   

9.
海洪  杨峰  李建平 《分析化学》2012,40(6):841-846
合成了Fe3O4@Au磁性纳米粒子,并根据单链寡聚核苷酸(ss-DNA)杂交原理,利用量子点电化学发光,构建了DNA电化学传感器.在磁控玻碳电极(MCGCE)表面,将5′-SH-ssDNA捕获探针自组装在Fe3O4@Au磁性纳米粒子上,然后与目标DNA互补的一端杂交形成dsDNA,再与双标记了量子点的5′-NH2-ssDNA-NH2-3′信号探针杂交形成三明治杂交的DNA.应用循环伏安法对DNA的固定与杂交进行了表征.目标DNA浓度在1.0×10-13~1.0×10-11 mol/L范围与其响应的ECL信号呈线性关系,检出限为1.8×10-14mol/L.由于采用量子点双标记法,检测的灵敏度显著提高.  相似文献   

10.
付萍  袁若  柴雅琴  殷冰  曹淑瑞  陈时洪  李宛洋 《化学学报》2008,66(15):1796-1802
在金电极表面修饰一层L-半胱氨酸,再利用静电吸附作用固定纳米普鲁士蓝(nano-PB),然后利用壳聚糖-纳米金复合膜将葡萄糖氧化酶(GOD)固定于修饰电极表面,制成新型的葡萄糖传感器.通过交流阻抗技术,循环伏安法和计时电流法考察了电极的电化学特性.在优化的实验条件下,该传感器在葡萄糖浓度为3.0×10-6~1.0×10-3 mol/L范围内有线性响应,检测下限为1.6×10-6 mol/L.此外该传感器具有响应快、稳定性好和选择性良好的特点,能有效排除常见干扰物质如抗坏血酸、尿酸等对测定的影响.  相似文献   

11.
《Analytical letters》2012,45(18):3046-3057
Abstract

Nano-MnO2/chitosan composite film modified glassy carbon electrode (MnO2/CHIT/GCE) was fabricated and a DNA probe was immobilized on the electrode surface. The immobilization and hybridization events of DNA were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The EIS was applied to the label-free detection of the target DNA. The human immunodeficiency virus (HIV) gene fragment was successfully detected by this DNA electrochemical sensor. The dynamic detection range was from 2.0 × 10?11 to 2.0 × 10?6 mol/L, with a detection limit of 1.0 × 10?12 mol/L.  相似文献   

12.
《Electroanalysis》2005,17(23):2182-2189
An electrochemical DNA biosensor was fabricated by immobilizing DNA probe on aluminum ion films that were electrodeposited on the surface of the stearic acid‐modified carbon paste electrode (CPE). DNA immobilization and hybridization were characterized with cyclic voltammetry (CV) by using methylene blue (MB) as indicator. MB has a couple of well‐defined voltammetric redox peaks at the CPE. The currents of redox peaks of MB decreased after depositing aluminum ion films on the CPE (Al(III)/CPE) and increased dramatically after immobilizing DNA probe (ssDNA/Al(III)/CPE). Hybridization of DNA probe led to a marked decrease of the peak currents of MB, which can be used to detect the target single‐stranded DNA. The conditions for the preparation of Al(III)/CPE, and DNA immobilization and hybridization were optimized. The specific sequences related to bar transgene in the transgenic corn and the PCR amplification of CP4 epsps gene from the sample of transgenic roundup ready soybean were detected by differential pulse voltammetry (DPV) with this new electrochemical DNA biosensor. The difference between the peak currents of MB at ssDNA/Al(III)/CPE and that at hybridization DNA modified electrode (dsDNA/Al(III)/CPE) was applied to determine the specific sequence related to the target bar gene with the dynamic range comprised between 1.0×10?7 mol/L to 1.0×10?4 mol/L. A detection limit of 2.25×10?8 mol/L of oligonucleotides can be estimated.  相似文献   

13.
In this paper, nano‐gold modified carbon paste electrode (NGMCPE) was employed to develop an electrochemical DNA hybridization biosensor. The proposed sensor was made up by immobilization of 15‐mer single stranded oligonucleotide probe for detection of target DNA. Hybridization detection relies on the alternation in guanine oxidation signal following hybridization of the probe with complementary genomic DNA. The guanine oxidation was monitored using differential pulse voltammetry (DPV). Different factors such as activation potential, activation time and probe immobilization conditions were optimized. The selectivity of the sensor was investigated by non‐complementary oligonucleotides. Diagnostic performance of the biosensor was described and the detection limit was found 1.9 × 10?13 M at the NGMCPE surface. All of the investigations were performed in both CPE and NGMCPE and finally their results were compared.  相似文献   

14.
《Analytical letters》2012,45(6):1083-1095
Abstract

A sensitive electrochemical DNA biosensor based on nano-ZnO/chitosan composite matrix for DNA hybridization detection was developed. The Nano-ZnO was synthesized by the hydrothermal method and dispersed in chitosan, which was used to fabricate the modification of the glassy carbon electrode (GCE) surface. The ZnO/chitosan-modified electrode exhibited good biocompatibility and excellent electrochemical conductivity. The hybridization detection was monitored with differential pulse voltammetry (DPV) measurement using methylene blue (MB) as an indicator. The established biosensor can effectively discriminate complementary target sequence and two-base-mismatched sequence, with a detection limit of 1.09 × 10?11 mol L?1 of complementary target.  相似文献   

15.
We present a new strategy for the label‐free electrochemical detection of DNA hybridization based on gold nanoparticles (AuNPs)/poly(neutral red) (PNR) modified electrode. Probe oligonucledotides with thiol groups at the 5‐end were covalently linked onto the surface of AuNPs/PNR modified electrode via S‐Au binding. The hybridization event was monitored by using differential pulse voltammetry (DPV) upon hybridization generates electrochemical changes at the PNR‐solution interface. A significant decrease in the peak current was observed upon hybridization of probe with complementary target ssDNA, whereas no obvious change was observed with noncomplementary target ssDNA. And the DNA sensor also showed a high selectivity for detecting one‐mismatched and three‐mismatched target ssDNA and a high sensitivity for detecting complementary target ssDNA, the detection limit is 4.2×10?12 M for complementary target ssDNA. In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.  相似文献   

16.
Based on graphene (GR), TiO2 nanorods, and chitosan (CTS) nanocomposite modified carbon ionic liquid electrode (CILE) as substrate electrode, a new electrochemical DNA biosensor was effectively fabricated for the detection of the transgenic soybean sequence of MON89788. By using methylene blue (MB) as hybridization indicator for monitoring the hybridization with different ssDNA sequences, the differential pulse voltammetric response of MB on DNA modified electrodes were recorded and compared. Due to the synergistic effects of TiO2 nanorods and GR on the electrode surface, the electrochemical responses of MB were greatly increased. Under optimal conditions the differential pulse voltammetric response of the target ssDNA sequence could be detected in the range from 1.0×10?12 to 1.0×10?6 mol/L with a detection limit of 7.21×10?13 mol/L (3σ). This electrochemical DNA biosensor was further applied to the polymerase chain reaction (PCR) product of transgenic soybeans with satisfactory results.  相似文献   

17.
A novel ion implantation sensor (DNA/COOH/ITO) based on DNA immobilization in COOH/ITO probe was manufactured for the first time. The surface morphologies of the electrodes were characterized by X‐ray photoelectron spectroscopy (XPS), field‐emission‐scanning electron microscopy (FSEM) and electrochemical methods. In a 0.5 mol/L PBS solution, a sensitive oxidation peak of DNA on the COOH/ITO electrode was obtained by voltammetry. The electrochemical behavior of DNA was studied. And the oxidative peak potential of DNA was +0.400 V (vs. Ag/AgCl). Its peak current was proportional to the concentration of DNA over the range of 1.0×10?8?1.0×10?6 mol/L with a detection limit of 5.0×10?9 mol/L (about 0.5 ng/mL). This sensor was applied to the direct detection of DNA samples.  相似文献   

18.
碳纳米管修饰金电极检测特定序列DNA   总被引:7,自引:0,他引:7  
唐婷  彭图治  时巧翠 《化学学报》2005,63(22):2042-2046
利用化学偶联法将末端修饰氨基的寡聚核苷酸固定在表面修饰有羧基化碳纳米管(CNTs-COOH)的金电极表面, 制备新型核酸探针, 可以特异性结合目标单链寡聚核苷酸. 以阿霉素作为嵌合指示剂, 利用示差脉冲法测定杂交的结果. 经过实验条件的优化, 测定DNA浓度在1.0×10-6~1.0×10-9 mol/L呈良好的线性关系. 检测限为: 2.54×10-10 mol/L. 碳纳米管特有的纳米结构对检测结果的放大作用, 提高了该传感器的检测限和灵敏度.  相似文献   

19.
In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH2 modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10?12 to 1.0×10?6 mol/L with a detection limit of 2.9×10?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.  相似文献   

20.
A sensitive electrochemical biosensor for detecting the sequence of short DNA oligomers is represented. The biosensor is based on a platinum electrode covered a polymerized membrane of conductive monomer N‐[6‐(thien‐3‐yl)acetoxy]‐pyrrolidine‐2, 5‐dione (TAPD). The membrane of TAPD immobilizes a probe DNA on the electrode. The hybridization of the probe with a sequence‐specific DNA in sample solutions is monitored by a self‐synthesized electroactive indicator, which specifically intercalates in the hybrids on the electrode surface. The current signal of the biosensor is proportional to the concentration of the target DNA in samples, and a very low detection limit of 5 × 10?10 mol/L is found. The biosensor has been used to detect the short oligomers containing of HTV‐1 and mycobacterrium nucleotide sequences.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号