Stereoisomeric Separation of Derivatized 2-alkanols Using Gas Chromatography-Mass Spectrometry: Sex Pheromone Precursors Found in Pine Sawfly Species

Stereoisomers of long-chain secondary alcohols are used as sex pheromone precursors among pine sawflies and some species can be severe pine forest pests. To use their pheromone in environmentally friendly pest management, methods are needed that can determine the stereochemistry of the precursor alcohols. Combinations of 11 acid chloride derivatives and 10 GC columns were evaluated for separation of stereoisomers of 3,7-dimethylundecan-2-ol, 3,7-dimethyldodecan-2-ol, 3,7-dimethyltridecan-2-ol, 3,7-dimethyltetradecan-2-ol, and 3,7-dimethylpentadecan-2-ol. Derivatization with (S)-2-acetoxypropionyl chloride in combination with a Chiraldex B-PA column separated all eight stereoisomers of 3,7-dimethylundecan-2-ol, 3,7-dimethyldodecan-2-ol, and 3,7-dimethyltridecan-2-ol. A combination of two different derivatization methods was needed to separate all stereoisomers of the longer chained alcohols 3,7-dimethyltetradecan-2-ol and 3,7-dimethylpentadecan-2-ol. A female extract of the pine sawfly Neodiprion lecontei was also analyzed and the stereochemistry of the sex pheromone alcohol precursor was determined to be (2S,3S,7S)-3,7-dimethylpentadecan-2-ol at an amount of about 7 ng/female. This paper presents the first GC-MS separation of all eight stereoisomers of 3,7-dimethylundecan-2-ol, 3,7-dimethyldodecan-2-ol, and 3,7-dimethyltridecan-2-ol in a single analytical run and also the first GC-MS determination of the stereochemistry of the sex pheromone precursor found in females of N. lecontei.     

Fluorous mixture synthesis of two libraries with hydantoin-, and benzodiazepinedione-fused heterocyclic scaffolds

Diversity-oriented synthesis (DOS) and fluorous mixture synthesis (FMS) are two aspects of combinatorial chemistry. DOS generates library scaffolds with skeletal, substitution, and stereochemistry variations, whereas FMS is a highly efficient tool for library production. The combination of these two aspects in solution-phase synthesis of two novel heterocyclic compound libraries is presented in this paper. Mixtures of different fluorous amino acids undergo [3 + 2] cycloadditions followed by postcondensation reactions. The mixtures are then demixed by fluorous HPLC. Fluorous tags are removed by cyclization to afford hydantoin- and benzodiazepinedione-fused heterocyclic compounds as individual, pure, and structurally defined molecules. The application of MS-directed HPLC purification and parallel four-channel LC/MS analysis further increases the efficiency of FMS.     

Structure assignment of lagunapyrone B by fluorous mixture synthesis of four candidate stereoisomers

Techniques of fluorous mixture synthesis have been used to make four candidate stereoisomers for the natural product lagunapyrone B. A quasiracemic mixture of vinyl iodides whose component configurations at C19-21 were encoded by fluorous silyl groups was fused to a central fragment by a Negishi coupling. A separate quasiracemic mixture of pyrone fragments whose component configurations at C6,7 were also encoded by fluorous silyl groups was synthesized and demixed. Stille coupling of the resulting pure quasienantiomers with the quasiracemic mixture provided two quasi-diastereomeric samples, which were demixed and detagged to provide all four lagunapyrone B stereoisomers. Lagunapyrone was assigned the 6R,7S,19S,20S,21R configuration by comparison of optical rotations.     

Preparative fluorous mixture synthesis of diazonium-functionalized oligo(phenylene vinylene)s

[structure: see text] A series of building blocks for the synthesis of oligo(phenylene vinylene)s (OPVs) and hybrid oligomers were prepared, and alternating Heck coupling and Horner-Wadswoth-Emmons (HWE) reactions were used to couple the building blocks. Model studies were carried out to optimize the reaction strategies. The products were made to bear aryl diazonium functionalities that allow them to be used as surface grafting moieties in hybrid silicon/molecule assemblies. A library of OPV and hybrid oligomer tetramers was synthesized using fluorous mixture synthesis (FMS). The fluorous tags, which are secondary amines bearing different numbers of fluorine atoms, were synthesized and used as phase tags in mixture synthesis. The tags and substrates were anchored together by triazene linkages. The mixture synthesis was monitored by analytical HPLC on a fluorous column, and isolation of final OPV and hybrid oligomer tetramers was achieved by preparative HPLC. At the end of the FMS, after demixing, the tagged products were detagged by cleaving the triazene linkage and generating a series of aryl diazonium compounds. The fluorous tags could be recovered and reused. The NMR spectra of the 1-aryl-3,3-dialkyltriazenes are discussed.     

靖远松叶蜂性信息素的合成新方法

靖远松叶蜂性信息素的合成新方法;二甲基-十三碳醇丙酸酯;Claisen重排反应     

The synthesis and application of fluorous boronates without perfluorinated solvents

The synthesis of a fluorous diol 4 bearing a perfluorodecyl chain was described. A series of boronic acid were attached to 4 by esterification. The purification of the products was fulfilled by facile filtration instead of expensive and environmental troublesome fluorous liquid-liquid extraction. The Suzuki cross-coupling reactions of the formed fluorous boronates 5 underwent smoothly and the fluorous diol 4 was recycled in good yields.     

Fluorous mixture synthesis of (-)-dictyostatin and three stereoisomers

[reaction: see text] A mixture of four stereoisomers whose configurations are encoded by fluorous silyl protecting groups has been prepared and converted over 22 steps to a mixture of protected dictyostatins. Demixing by fluorous HPLC followed by removal of the fluorous protecting groups (detagging) provides dictyostatin and three C6,C7 stereoisomers. Biological evaluation showed that the monoepimers of the natural product retained highly potent activity.     

Fluorous and traceless synthesis of substituted indole alkaloids

The fluorous traceless synthesis of substituted indole alkaloids is carried out first by attaching the 3-(perfluorooctyl)propanol with Boc protected L-tryptophan. The reaction of perfluoroalkyl (Rfh)-tagged tryptophan esters with various aldehydes undergoes Pictet-Spengler reaction to give cis and trans stereoisomers of tetrahydro-beta-carbolines. The nucleophilic addition of the piperidine nitrogen across various isocyanates is followed by the cyclization of ureas and simultaneous rupture of the fluorous tag to afford the hydantoin ring fused tetrahydro-beta-carbolines. All the fluorous-tag compounds are purified by solid-phase extraction (SPE) through Fluoro Flash cartridges.     

Synthesis of aminoglycoside derivatives on a Cbz-type heavy fluorous tag

Four aminoglycoside derivatives containing a 2,6-diamino-2,6-dideoxy-d-glucopyranose disaccharide structure were successfully prepared by using a Cbz-type heavy fluorous tag in a fluorous synthesis. A Cbz-type heavy fluorous tag was prepared using the hexakis(fluorous chain)-type alcohol 11, and the fluorous alcohol 11 was recovered in good yield after the synthesis of aminoglycoside derivatives.     

Fluorous Boc ((F)Boc) carbamates: new amine protecting groups for use in fluorous synthesis

The first fluorous variants of the Boc (tert-butyloxycarbonyl) group have been prepared and tested for their suitability as nitrogen protecting groups. A group with two fluorous chains and an ethylene spacer, (RfCH2CH2)2(CH3)COC(O)-, was readily attached to a representative amine but was difficult to cleave. In contrast, groups with two fluorous chains and a propylene spacer, (RfCH2CH2CH2)2(CH3)COC(O)-, or one fluorous chain and an ethylene spacer, (RfCH2CH2)(CH3)2COC(O)-, were readily formed and cleaved. The fluorous alcohol component of the (F)Boc group can be removed by evaporation and can be recovered and reused. The utility of the new (F)Boc group (C8F17CH2CH2)(CH3)2COC(O)- was demonstrated in 16 and 96 compound library synthesis exercises. Separations can be achieved either by manual, parallel fluorous solid-phase extraction, or automated, serial fluorous chromatography. The results provide additional confirmation of the value of "light" fluorous synthesis techniques, and the new fluorous Boc groups expand the applicability of fluorous synthesis techniques to many classes of nitrogen-containing organic compounds.     

Practical heavy fluorous tag for carbohydrate synthesis with minimal chromatographic purification

A practical heavy fluorous tag 5 bound to a benzylic linker was prepared and applied to carbohydrate synthesis. The fluorous tag 5 was readily introduced to the desired hydroxyl group and carboxyl group by using various methods. Synthesis of the oligosaccharide, which included the terminal structure of class III mucin, was achieved with single-column chromatographic purification. In addition, because of the symmetrical structure of 5, each fluorous synthetic intermediate could be analyzed much easier by NMR spectroscopy than in the case of the fluorous compounds connecting our previous fluorous tags.     

Preparation of Perfluoroalkyl Substituted Saccharides and Their Distribution Ratio between Organic and Fluorous Sovlents

A "fluorous synthesis" approach is outlined in which organic molecules are rendered solublity in fluorocarbon solvents by attachment of a suitable fluorocanbon group. Fluorocarbon sovlents are immisicible in organic solutions, and fluorous molecules partition out of an organic phanse and into a fluorous phase in a standard liquid-liquid extraction. Simple yet substantive separations of organic reaction mixtures are achieved without resorting to chromatography. This methed has been used in many fields, but seldom in oligosacchride synthesis.     

Total synthesis of a 28-member stereoisomer library of murisolins

Total syntheses of two 16-member libraries of murisolin isomers are reported. In the first library, fluorous PMB (p-methoxybenzyl) groups encode configurations, and four mixtures of four dihydroxy-tetrahydrofurans are prepared by Shi epoxidation followed (optionally) by Mitsunobu reaction. The mixtures are coupled by Kocienski-Julia reaction with a single hydroxybutenolide followed by hydrogenation. Demixing and detagging provide the 16 pure stereoisomers. In the second synthesis, a single mixture of four fluorous-tagged dihydroxy-tetrahydrofurans is coupled with a four-compound mixture of hydroxybutenolides that bear derivatives of DMB (dimethoxybenzyl) groups with oligoethylene glycol (OEG) units that encode the configurations at C4 and C34. The 16-compound mixture is subjected to hydrogenation, double demixing, and detagging to provide the 16 isomerically pure murisolins. Twelve of these isomers are new, while four match samples from the first library.     

Preparation, properties and synthetic potentials of fluorous boronates

A fluorous approach to the chemistry of boronic acids and its application in fluorous-phase techniques are described. Treatment of fluorous bromosilane 2 with allyl Grignard reagent followed by dihydroxylation provided fluorous diol 1. A series of boronic acids were attached to 1 by esterification. The formed fluorous boronates 4 were moisture sensitive and thus their synthetic potentials were limited. Thus a fluorous pinacol, 5, was designed and synthesized by treatment of fluorous bromosilane 2 with excess 2,3-dimethyl-2-butyenylmagnesium bromide 9 to afford fluorous tetramethyl ethene 8, and was dihydroxylated. Compound 5 was successfully used to prepare fluorous boronates in a one-pot process from organic bromides. We have demonstrated that olefin cross-metathesis can be carried out in a fluorous version. It is noteworthy that all of the fluorinated compounds reported in this paper were purified by simple liquid extraction.     

Fluorous mixture synthesis of 4-alkylidene cyclopentenones via a rhodium-catalyzed [2+2+1] cycloaddition of alkynyl allenes

Fluorous mixture synthesis was used to prepare a library of 4-alkylidene cyclopentenones starting from a mixture of four alpha-amino acid derivatives tagged with different fluorous benzyl carbamates ((F)CBz) of varying fluorine content. The amino acids were converted to the corresponding propargyl esters and then subjected to an ester-enolate Claisen rearrangement to give a mixture of allenic amino esters. The allenes were then split four ways and propargylated with different propargyl bromides to give four mixtures of alkynyl allenes. The 4-alkylidene cyclopentenones were formed by a formal [2+2+1] cycloaddition of the alkynyl allenes using catalytic [Rh(CO)2Cl]2 under CO atmosphere. Demixing by fluorous preparative HPLC, removal of the fluorous benzyl carbamates, and then exposure to HCl/ether gave the hydrochloride salts of 16 compounds as diastereomeric mixtures in 69-99% purity. Thus, after just 26 chemical steps, a library of 16 cyclopentenones was prepared by using fluorous mixture synthesis. By comparison, the same library would have required 112 steps if each compound were made individually by parallel synthesis.     

Synthesis of monosaccharide units using fluorous method

The efficient synthesis of monosaccharide units, glycosyl acceptor, and donor, by using the fluorous tag method was achieved. Fluorous tag 5 was stable in each reaction condition to the preparation of various monosaccharide units. Each fluorous synthetic intermediate could be obtained in a straightforward manner by a simple fluorous-organic solvent partition.     

Microwave-assisted fluorous synthesis of 2-aryl-substituted 4-thiazolidinone and 4-thiazinanone libraries

A straightforward two-step protocol for the synthesis of 2-aryl-substituted 4-thiazolidinone and 4-thiazinanone libraries has been developed. The one-pot, three-component reactions of fluorous benzaldehydes with amines and mercaptoacetic acid or mecaptopropanoic acid produce the heterocyclic systems. Intermediates purified by fluorous solid-phase extraction are subject to microwave-assisted palladium-catalyzed coupling reactions to simultaneously cleave the fluorous tag and introduce the biaryl and thioaryl functional groups to the 2-position of 4-thiazolidinones and 4-thiazinanones.     

Fluorous-Assisted One-Pot Oligosaccharide Synthesis

A new method for oligosaccharide assembly that combines the advantages of one-pot synthesis and fluorous separation is described. After one-pot glycosylations are completed, a fluorous tag is introduced into the reaction mixture to selectively "catch" the desired oligosaccharide, which is rapidly separated from non-fluorous impurities by fluorous solid-phase extraction (F-SPE). Subsequent "release" of the fluo rous tag and F-SPE achieved the purification of the desired oligosaccharide without the use of time- and solvent-consuming silica gel chromatography. Linear and branched oligosaccharides have been synthesized with this approach in just a few hours (for the overall oligosaccharide assembly and purification process).     

Solution-phase parallel synthesis with oligoethylene glycol sorting tags. Preparation of all four stereoisomers of the hydroxybutenolide fragment of murisolin and related acetogenins

The principles of the oligoethylene glycol (OEG) mixture synthesis are illustrated with the synthesis of all four possible stereoisomers of a hydroxybutenolide fragment common to murisolin and many other acetogenins. Modified dimethoxybenzyl groups with varying numbers of OEG units (-CH2CH2O-) are used to protect alcohols and serve as codes for configurations at two stereocenters. The encoded isomers are carried through several steps in a sequence of mixing prior to the reaction and then demixing during the separation to give individual pure products. A new tagging scheme is introduced in which a stereocenter bearing a hydroxy group is given two different tags. These initially redundant tags then serve to encode the configuration of another (untagged) stereocenter by appropriate pairwise reactions of the tagged precursors. The experimental features (reaction, analysis, separation, and characterization) of OEG mixture synthesis are detailed and are compared to and contrasted with those of fluorous mixture synthesis.     

Fluorous (trimethylsilyl)ethanol: a new reagent for carboxylic acid tagging and protection in peptide synthesis

Starting with a fluorous analogue of 2-(trimethylsilyl)ethanol, we have designed an easy method for preparing a new fluorous tag ((F)TMSE) for the protection of carboxylic acids. Because mild conditions are employed in the tag cleavage (TBAF in the presence of 4 A molecular sieves, which prevent racemization), this tag can be advantageously used in the synthesis of peptides and modified peptides, as we have demonstrated with several examples, including the fluorous synthesis of short alpha- and beta-peptides as well as of modified fluorinated retropeptides.