Enzymatic hydrolysis of native cellulose nanofibrils and other cellulose model films: effect of surface structure

Model films of native cellulose nanofibrils, which contain both crystalline cellulose I and amorphous domains, were used to investigate the dynamics and activities of cellulase enzymes. The enzyme binding and degradation of nanofibril films were compared with those for other films of cellulose, namely, Langmuir-Schaefer and spin-coated regenerated cellulose, as well as cellulose nanocrystal cast films. Quartz crystal microbalance with dissipation (QCM-D) was used to monitor the changes in frequency and energy dissipation during incubation at varying enzyme concentrations and experimental temperatures. Structural and morphological changes of the cellulose films upon incubation with enzymes were evaluated by using atomic force microscopy. The QCM-D results revealed that the rate of enzymatic degradation of the nanofibril films was much faster compared to the other types of cellulosic films. Higher enzyme loads did not dramatically increase the already fast degradation rate. Real-time measurements of the coupled contributions of enzyme binding and hydrolytic reactions were fitted to an empirical model that closely described the cellulase activities. The hydrolytic potential of the cellulase mixture was found to be considerably affected by the nature of the substrates, especially their crystallinity and morphology. The implications of these observations are discussed in this report.     

Exopolysaccharide production by a marine cyanobacterium Cyanothece sp.

The adsorption and the hydrolytic action of purified cellulases of Trichoderma reesei, namely, cellobiohydrolase I (CBH I), endoglucanase II (EG II), and their core proteins, on steam-pretreated willow were compared. The two enzymes differed clearly in their adsorption and hydrolytic behavior. CBH I required the cellulose-binding domain (CBD) for efficient adsorption and hydrolysis, whereas EG II was able to adsorb to steam pretreated willow without its CBD. Absence of the CBD decreased the hydrolysis of cellulose by EG II, but the decrease was less pronounced than with CBH I. A linear relationship was observed between the amount of enzyme adsorbed and the degree of hydrolysis of cellulose only for CBHI. EG II and EG II core appeared to be able to hydrolyze only 1 to 2% of the substrate regardless of the amount of protein adsorbed.     

Quartz crystal microbalance with dissipation monitoring of the enzymatic hydrolysis of steam-treated lignocellulosic nanofibrils

Quartz crystal microbalance with dissipation (QCM-D) monitoring was performed to investigate the impact of steam treatment (ST) on the enzymatic hydrolysis of lignocellulosic nanofibrils (LCNFs). ST at mild temperatures up to 140 °C mainly affected the hemicellulose content of LCNFs. The hemicellulose constituents in the water-soluble fraction and the residual LCNF were quantified. The impact of changes in hemicellulose by ST on enzymatic hydrolysis was monitored by QCM-D using Acremonium cellulase as a source of multicomponent enzymes including hemicellulases. LCNFs without ST showed distinctive initial changes in frequency and energy dissipation, which differed from those of pure cellulose film, whereas these changes shifted toward typical changes of enzymatic hydrolysis of pure cellulosic films with increasing ST temperature. The QCM-D results suggested that hemicellulose located around cellulose microfibrils is rapidly decomposed, thus exposing the cellulose surface shortly after initial enzymatic hydrolysis, and then the main enzymatic hydrolysis of cellulose occurs.     

Interactions of endoglucanases with amorphous cellulose films resolved by neutron reflectometry and quartz crystal microbalance with dissipation monitoring

A study of the interaction of four endoglucanases with amorphous cellulose films by neutron reflectometry (NR) and quartz crystal microbalance with dissipation monitoring (QCM-D) is reported. The endoglucanases include a mesophilic fungal endoglucanase (Cel45A from H. insolens), a processive endoglucanase from a marine bacterium (Cel5H from S. degradans ), and two from thermophilic bacteria (Cel9A from A. acidocaldarius and Cel5A from T. maritima ). The use of amorphous cellulose is motivated by the promise of ionic liquid pretreatment as a second generation technology that disrupts the native crystalline structure of cellulose. The endoglucanases displayed highly diverse behavior. Cel45A and Cel5H, which possess carbohydrate-binding modules (CBMs), penetrated and digested within the bulk of the films to a far greater extent than Cel9A and Cel5A, which lack CBMs. While both Cel45A and Cel5H were active within the bulk of the films, striking differences were observed. With Cel45A, substantial film expansion and interfacial broadening were observed, whereas for Cel5H the film thickness decreased with little interfacial broadening. These results are consistent with Cel45A digesting within the interior of cellulose chains as a classic endoglucanase, and Cel5H digesting predominantly at chain ends consistent with its designation as a processive endoglucanase.     

Trichoderma reesei cellulases and their core domains in the hydrolysis and modification of chemical pulp

The action of monocomponent Trichoderma reesei endoglucanases (EG I, EG II; EC 3.2.1.4) and cellobiohydrolases (CBH I, CBH II; EC 3.2.1.91) and their core proteins was compared using isolated celluloses and bleached chemical pulp. The presence of cellulose binding domain (CBD) in the intact enzymes did not affect their action against soluble substrates. In the case of insoluble isolated celluloses and the chemical pulp the presence of CBD enhanced the enzymatic hydrolysis of cellulose. The effect of CBD was more pronounced in the cellobiohydrolases, hydrolysing mainly crystalline cellulose, than in the endoglucanases which were more efficient in hydrolysing amorphous cellulose. The pulp properties measured, that is, viscosity and strength after PFI refining, were equally affected by the treatment with intact enzymes and corresponding core proteins, suggesting that the presence of CBD in intact cellulases affects mainly the cellulose hydrolysis level and less the mode of action of T. reesei cellulases in pulp. The better beatability of the bleached chemical pulp treated with intact endoglucanases than that treated with the corresponding core proteins suggests that the presence of CBD in endoglucanases could, however, result in beneficial effects on pulp properties.     

Hydrolysis of steam-pretreated lignocellulose

The mechanism of hydrolysis of cellulose is important for improving the enzymatic conversion in bioprocesses based on lignocellulose. Adsorption and hydrolysis experiments were performed with cellobiohydrolase I (CBH I) and endoglucanase II (EG II) from Trichoderma reesei on a realistic lignocellulose substrates: steam-pretreated willow. The enzymes were studied both alone and in equimolar mixtures. Adsorption isotherms were determined at 4 and 40 degrees C during 90-min reaction times. Both CBH I and EG II adsorbed stronger at 40 than at 4 degrees C. The time course of adsorption and hydrolysis, 3 min to 48 h, was studied at 40 degrees C. About 90% of the cellulases were adsorbed within 2 h. The hydrolysis rate was high in the beginning but decreased during the time course. Based on adsorption data, the hydrolysis and synergism were analyzed as function of adsorbed enzyme. CBH I showed a linear correlation between hydrolysis and adsorbed enzyme, whereas for EG II the corresponding curve leveled off at both 4 and 40 degrees C. At low conversion, below 1%, EG II produced as much soluble sugars as CBH I. At higher conversion, CBH I was more efficient than EG II. The synergism as function of adsorbed enzyme increased with bound enzyme before reaching a stable value of about 2. The effect of varying the ratio of CBH I:EG II was studied at fixed total enzyme loading and by changing the ratio between the enzymes. Only a small addition (5%) of EG II to a CBH I solution was shown to be sufficient for nearly maximal synergism. The ratio between EG II and CBH I was not critical. The ratio 40% EG II:60% CBH I showed similar conversion to 5% EG II:95% CBH I. Modifications of the conventional endo-exo synergism model are proposed.     

Preparation of Langmuir/Blodgett-cellulose Surfaces by Using Horizontal Dipping Procedure. Application for Polyelectrolyte Adsorption Studies Performed with QCM-D

A method of preparing model cellulose surfaces by the Langmuir–Blodgett (LB) technique with horizontal dipping procedure has been developed. The primary aim for the use of these surfaces was adsorption studies performed with the quartz crystal microbalance with dissipation (QCM-D) instrument. Hydrophobised cellulose (trimethylsilyl cellulose, TMSC) was deposited on the hydrophobic, polystyrene-coated QCM-D crystal. After 15 dipping cycles, the TMSC film fully covers the crystal surface. TMSC can easily be hydrolysed back to cellulose with acid hydrolysis. With this method a smooth, rigid, thin and reproducible cellulose film was obtained. Its morphology, coverage, chemical composition and wetting was further characterised using atomic force microscopy (AFM), X-Ray photoelectron spectroscopy (XPS), and contact angle measurements. The swelling behaviour and the stability of the cellulose film in aqueous solutions at different ionic strengths were studied using the QCM-D instrument. The swelling/deswelling properties of the cellulose film were those expected of polyelectrolytes with low charge density; some swelling occurred in pure water and the swelling decreased when the ionic strength was increased. No significant layer softening was detected during the swelling. The effect of electrolyte concentration and polymer charge density on the adsorption of cationic polyelectrolytes on the cellulose surface was also investigated. At low electrolyte concentration less of the highly charged PDADMAC was adsorbed as compared to low charged C-PAM. The adsorbed amount of PDADMAC increased with increasing ionic strength and a more compact layer was formed while the effect of electrolyte concentration on the adsorption of C-PAM was not as pronounced.     

Cellulose nanocrystal submonolayers by spin coating

Dilute concentrations of cellulose nanocrystal solutions were spin coated onto different substrates to investigate the effect of the substrate on the nanocrystal submonolayers. Three substrates were probed: silica, titania, and amorphous cellulose. According to atomic force microscopy (AFM) images, anionic cellulose nanocrystals formed small aggregates on the anionic silica substrate, whereas a uniform two-dimensional distribution of nanocrystals was achieved on the cationic titania substrate. The uniform distribution of cellulose nanocrystal submonolayers on titania is an important factor when dimensional analysis of the nanocrystals is desired. Furthermore, the amount of nanocrystals deposited on titania was multifold in comparison to the amounts on silica, as revealed by AFM image analysis and X-ray photoelectron spectroscopy. Amorphous cellulose, the third substrate, resulted in a somewhat homogeneous distribution of the nanocrystal submonolayers, but the amounts were as low as those on the silica substrate. These differences in the cellulose nanocrystal deposition were attributed to electrostatic effects: anionic cellulose nanocrystals are adsorbed on cationic titania in addition to the normal spin coating deposition. The anionic silica surface, on the other hand, causes aggregation of the weakly anionic cellulose nanocrystals which are forced on the repulsive substrate by spin coating. The electrostatically driven adsorption also influences the film thickness of continuous ultrathin films of cellulose nanocrystals. The thicker films of charged nanocrystals on a substrate of opposite charge means that the film thickness is not independent of the substrate when spin coating cellulose nanocrystals in the ultrathin regime (<100 nm).     

Enzymatic degradation of model cellulose films

Enzymatic degradation of model cellulose films prepared by a spin-coating technique was investigated by ellipsometry. The cellulose films were prior to degradation characterized by ellipsometry, contact angle measurements, ESCA (electron spectroscopy for chemical analysis) and AFM (atomic force microscopy). At enzyme addition to preformed cellulose films an initial adsorption was observed, which was followed by a total interfacial mass decrease due to enzymatic degradation of the cellulose films. The degradation rate was found to be constant during an extended time of hours, whereafter the degradation leveled off. In parallel to the decreased interfacial mass, the cellulose degradation resulted in a thinner and more dilute interfacial film. At long degradation times, however, there was an expansion of the cellulose film. The enzyme concentration affected the degradation rate significantly, with a faster degradation at a higher enzyme concentration. The effects of pH, temperature, ionic strength and stirring rate in the cuvette were also investigated.     

The effect of Trichoderma reesei cellulases and hemicellulases on the paper technical properties of never-dried bleached kraft pulp

Four purified cellulases, a xylanase and mannanase from Trichoderma reesei were used to treat never-dried bleached pine kraft pulp prior to refining, and the effects on pulp properties were evaluated. The enzymatic treatments hydrolysed up to 0.8% of pulp dry weight. The results demonstrated that the individual cellulases have profoundly different modes of action in modifying pulp carbohydrates. This is especially clear when comparing their effects at the same level of hydrolysis. Pretreatment with cellobiohydrolases I (CBH I) and II (CBH II) had virtually no effect on the development of pulp properties during refining, except for a slight decrease in strength properties. On the contrary, endoglucanase I (EG I) and endoglucanase II (EG II) improved the beatability of the pulp as measured by Schopper--Riegler value, sheet density and Gurley air resistance. Of the endoglucanases, EG II was most effective in improving the beating response. The combinations of CBH I with EG I and EG II had similar effects on the pulp properties as the endoglucanases alone, although the amount of hydrolysed cellulose was increased. Pretreatments with xylanase or mannanase did not appear to modify the pulp properties. The same enzyme treatments which improved the beatability, however, slightly impaired the pulp strength, especially tear index at the enzyme dosages used. When compared at a given level of cellulose hydrolysis, the negative effect of EG II on strength properties was more pronounced compared with EG I. Thus, the exploitation of cellulases for fibre treatments requires careful optimization of both enzyme composition and dosage. Since the endoglucanases had no positive effect on the development of tensile strength, it is suggested that the explanation for the increased beating response is increased fibre breakage and formation of fines, rather than improved flexibilization. This revised version was published online in August 2006 with corrections to the Cover Date.     

Adsorption of carboxymethyl cellulose on polymer surfaces: evidence of a specific interaction with cellulose

The adsorption of carboxymethyl cellulose (CMC), one of the most important cellulose derivatives, is crucial for many scientific investigations and industrial applications. Especially for surface modifications and functionalization of materials, the polymer is of interest. The adsorption properties of CMC are dependent not only on the solutions state, which can be influenced by the pH, temperature, and electrolyte concentration, but also on the chemical composition of the adsorbents. We therefore performed basic investigation studies on the interaction of CMC with a variety of polymer films. Thin films of cellulose, cellulose acetate, deacetylated cellulose acetate, polyethylene terephthalate, and cyclo olefin polymer were therefore prepared on sensors of a QCM-D (quartz crystal microbalance) and on silicon substrates. The films were characterized with respect to the thickness, wettability, and chemical composition. Subsequently, the interaction and deposition of CMC in a range of pH values without additional electrolyte were measured with the QCM-D method. A comparison of the QCM-D results showed that CMC is favorably deposited on pure cellulose films and deacetylated cellulose acetate at low pH values. Other hydrophilic surfaces such as silicon dioxide or polyvinyl alcohol coated surfaces did not adsorb CMC to a significant extent. Atomic force microcopy confirmed that the morphology of the adsorbed CMC layers differed depending on the substrate. On hydrophobic polymer films, CMC was deposited in the form of larger particles in lower amounts whereas hydrophilic cellulose substrates were to a high extent uniformly covered by adsorbed CMC. The chemical similarity of the CMC backbone seems to favor the irreversible adsorption of CMC when the molecule is almost uncharged at low pH values. A selectivity of the cellulose CMC interaction can therefore be assumed. All CMC treated polymer films exhibited an increased hydrophilicity, which confirmed their modification with the functional molecule.     

All-cellulose multilayers: long nanofibrils assembled with short nanocrystals

Self-organized multilayer films were formed by sequential addition of oppositely charged cellulose I nanoparticles. The all-cellulosic multilayers were prepared via adsorption of cationicially modified cellulose nanofibrils (cat NFC) and anionic short crystalline cellulose (CNC) at pH 4.5 and pH 8.3. The properties and build-up behavior of layer-by-layer-constructed films were studied with microgravimetry (QCM-D) and the direct surface forces in these systems were explored with colloidal probe microscopy to gain information about the fundamental interplay between cat NFC and anionic CNC. The importance of the first layer on the adsorption of the consecutive layers was demonstrated by comparing pure in situ adsorption in the QCM-D with multilayer films made by spin coating the first cationic NFC layer and then subsequently adsorbing the following layers in situ in the QCM-D chamber. Differences in adsorbed amount and viscoelastic behavior were observed between those two systems. In addition, a significant pH dependence of cat NFC charge was found for both direct surface interactions and layer properties. Moreover the underlying cellulose layer in multilayer film was established to influence the surface forces especially at lower pH, where the cat NFC chains extensions were facilitated and overall charge was affected by the cationic counterpart within the layers. This enhanced understanding the effect of charge and structure on the interaction between these renewable nanoparticles is valuable when designing novel materials based on nanocellulose.     

Assessment of endoglucanase activity by analyzing the degree of cellulose polymerization and high-throughput analysis by near-infrared spectroscopy

We developed a novel and practical assessment technique for endoglucanase (EG) activity by measuring the degree of polymerization (DP) of cellulose from Eucalyptus globulus. This evaluation method demonstrated that EG II from Trichoderma reesei had higher endoglucanase activity than EG I, which has not been detected in conventional experiments using carboxymethyl cellulose as a model substrate. In addition, a high-throughput protocol for DP measurement was developed by using near-infrared spectroscopy combined with a multivariate analysis. Interpreting the regression coefficient, a reciprocal correlation was observed between the relative crystallinity of the cellulosic residue after enzymatic hydrolysis and the DP.     

Study of film structure and adsorption kinetics of polyelectrolyte multilayer films: effect of pH and polymer concentration

The alternate adsorption of polycation poly(allylamine hydrochloride)(PAH) and the sodium salt of the polymeric dye poly(1-[ p-(3'-carboxy-4'-hydroxyphenylazo)benzenesulfonamido]-1,2-ethandiyl)(PCBS) on quartz crystals coated with silica was studied to understand the structural properties and adsorption kinetics of these films using a combination of quartz crystal microbalance with dissipation monitoring (QCM-D), absorbance, and ellipsometry measurements. In-situ deposition of the polycation PAH on QCM crystals was monitored, followed by rinsing with water and then deposition of the polyanion PCBS. The effects of polymer concentration and pH on film structure, composition and adsorption kinetics were probed. The polymers were adsorbed at neutral pH conditions and at elevated pH conditions where PAH was essentially uncharged to obtain much thicker films. The change in the resonant frequency, Deltaf, of the QCM-D showed a linear decrease with the number of bilayers, a finding consistent with absorbance and ellipsometric thickness measurements which showed linear growth of film thickness. By using the Delta f ratios of PCBS to PAH, the molar ratios of repeat units of PCBS to PAH in the bilayer films as determined by QCM-D were approximately 1:1 at polyelectrolyte concentrations 5-10 mM repeat unit, indicating complete dissociation of the ionic groups. The frequency and dissipation data from the QCM-D experiments were analyzed with the Voigt model to estimate the thickness of the hydrated films which were then compared with thicknesses of dry films measured by ellipsometry. This led to estimates of the water content of the films to be approximately 45 wt %. In addition to the QCM-D, some films were also characterized by a QCM which measures only the first harmonic without dissipation monitoring. For the deposition conditions studied, the deposited mass values measured by the QCM's first harmonic were similar to the results obtained using higher harmonics from QCM-D, indicating that the self-assembled polyelectrolyte films were rigid.     

Surface forces measurements of spin-coated cellulose thin films with different crystallinity

A systematic study of the surface forces between a cellulose sphere and cellulose thin films of varying crystallinity has been conducted as a function of ionic strength and pH. Semicrystalline cellulose II surfaces and amorphous cellulose films were prepared by spin-coating of the precursor cellulose solutions onto oxidized silicon wafers before regeneration in water. Crystalline cellulose I surfaces were prepared by spin-coating wafers with aqueous suspensions of sulfate-stabilized cellulose I nanocrystals. These preparation methods produced thin, smooth films suitable for surface forces measurements. The interaction with the cellulose I was monotonically repulsive at pH 3.5, 5.8, and 8.5 and at 0.1, 1, and 10 mM ionic strengths. This was attributed to the presence of strongly ionizable sulfur-containing groups on the cellulose nanocrystal surfaces. The amorphous film typically showed a steric interaction up to 100 nm away from the interface that was independent of the solution conditions. A range of surface forces were successfully measured on the semicrystalline cellulose II films; attractive and repulsive regimes were observed, depending on pH and ionic strength, and were interpreted in terms of van der Waals and electrostatic interactions. Clearly, the forces acting near cellulose surfaces are very dependent on the way the cellulose surface has been prepared.     

Enzymatic kinetics of cellulose hydrolysis: a QCM-D study

The interactions between films of cellulose and cellulase enzymes were monitored using a quartz crystal microbalance (QCM). Real-time measurements of the coupled contributions of enzyme binding and hydrolytic reactions were fitted to a kinetic model that described closely significant cellulase activities. The proposed model combines simple Boltzmann sigmoidal and 1 - exp expressions. The obtained kinetics parameters were proven to be useful to discriminate the effects of incubation variables and also to perform enzyme screening. Furthermore, it is proposed that the energy dissipation of a film subject to enzymatic hydrolysis brings to light its structural changes. Overall, it is demonstrated that the variations registered in QCM frequency and dissipation of the film are indicative of mass and morphological transformations due to enzyme activities; these include binding phenomena, progressive degradation of the cellulose film, existence of residual, recalcitrant cellulose fragments, and the occurrence of other less apparent changes throughout the course of incubation.     

Swelling behavior of self-assembled monolayers of alkanethiol-terminated poly(ethylene glycol): a neutron reflectometry study

The swelling behavior of alkanethiol-terminated poly(ethylene glycol) with an average molecular weight of 2180 Da (i.e., approximately 45 ethylene glycol, EG, units) in contact with water was investigated by neutron reflectometry as a function of the morphology of the PEG-SH layer. Amorphous films at a low grafting density show significant swelling with an increase of the film thickness from approximately 25 A in the dry state to approximately 70 A in contact with D2O, which corresponds to a total water uptake of approximately 38 mass %. In contrast, quasi-crystalline monolayers exhibit only a small amount of water penetrating into the film (approximately 8 mass %) with a corresponding change of the layer thickness from approximately 110 to approximately 125 A. The water uptake per EG unit corresponds to the literature value of 1.5 for the amorphous layer and to only 0.25 in the case of the quasi-crystalline film.     

Purification and properties ofClostridium thermocellum endoglucanase 5 produced inEscherichia coli

Endoglucanase 5 (EG5) has been isolated from the strain ofE. coli TGI harboring recombinant plasmid pCU108, which contains thecel5 gene ofC. thermocellum. The enzyme has been produced with 98-fold purification and a final yield of 27% by using subsequent twofold high performance ion-exchange chromatography on Mono Q and high performance chromatofocusing on Mono P. The protein has a mol mass of 35 kDa and includes 3 multiple forms with pI 4.4–4.8 as evidenced by analytical gel isoelectrofocusing. EG5 cleaves CMC (K_m = 0.097 g/L, V_max = 8.2 mg/min·mg of protein), amorphous cellulose, xylan, lichenan as a substrate with an optimum temperature of 80?C and pH 6.0 and Avicel (K_m = 18.2 g/L, V_max = 0.035 mg/min·mg of protein) with an optimum temperature of 60?C and pH 6.O. Cellobiose in concentrations up to 200 Μg/mL do not inhibit the hydrolysis of CMC by EG5, but 10–30 Μg/mL of glucose significantly decrease the activity of this enzyme. The stimulating role of calcium chloride and concentration of protein in the system has been demonstrated for Avicel hydrolysis by EG5.     

Reactivities of cellulases from fungi towards ribbon-type bacterial cellulose and band-shaped bacterial cellulose

We have investigated the reactivities of various cellulases onribbon-type bacterial cellulose (BC I) and band-shaped bacterial cellulose (BCII) so as to clarify the properties of different cellulases. BC I waseffectively hydrolyzed by exo-type cellulases from different fungi from twicetofour times as much as BC II, but endo-type cellulases showed little differencein reactivity on those substrates. One of the endo-type cellulases, EG II fromTrichoderma reesei, degraded BC II more rapidly thanexo-type cellulases even in the production of reducing sugars. The degree ofpolymerization (DP) of BC II was rapidly decreased by endo-type cellulases atanearly stage, while exo-type cellulases did not cause the decrease of DP atthe initial stage, though the decrease of DP was observed after an incubation of24 h. All exo-type cellulases adsorbed on BC I and BC II,whileendo-type cellulases except for EG II adsorbed slightly on both substrates. Itwas interesting to observe EG II adsorbed on BC I but not on BC II. It issuggested that the adsorption of enzyme on cellulose is important for thedegradation of BC I, but not for BC II. It is proposed that the ratio of aspecific activity of each enzyme between BC I and BC II represents thedifference in the mode of action of cellulase. Furthermore, the K _RW value, which we can calculate from thedecrease of DP/reducing sugar produced, is effective for discriminating themode of action of cellulase, especially the evaluation of randomness in thehydrolysis of cellulose by endo- and exo-type cellulases.