Structural and Chemical Features of Extraction with Crown Ethers

Unlike linear extracting agents, in the extraction of metal salts from aqueous solutions of inorganic acids with crown ethers, the inclusion compounds, whose composition depends on several external and internal factors, go to the organic phase. The study of the molecular structure of the formed complexes by X-ray diffraction analysis showed that adducts of crown ethers with inorganic acids are host–guest complexes in which the hydroxonium ion is in the polyether macrocycle cavity. When the aqueous phase contains metal ions capable of displacing the hydroxonium ions from the macrocycle (K⁺, Pb²⁺, Hg²⁺, Sr²⁺, NH₄ ⁺), complexes containing metal cations as the guest in the macrocycle cavity, according to X-ray diffraction data, go to the organic phase. In addition, metals forming ionic associates (AuCl₄ ^-, FeCl₄ ^-, GaCl₄ ^-) in an aqueous solution are extracted with crown ethers in accordance with the anion-exchange mechanism. A system in which traces of metals in the 2 M HNO₃ +5 M HCl mixture serve as the aqueous phase was proposed for estimation of the general extraction ability of crown ethers. Such a system can be used for metal extraction via any possible mechanism. The stereochemical peculiarities of the extraction ability of crown ethers (compared to linear molecules) can be used for selective extraction and separation of metals.     

A DFT Study on the Selective Extraction of Metallic Ions by 12-Crown-4

In order to predict the extraction ability of 12-crown-4 for different metallic ions, the complexes [M(12-crown-4)] and [M(H₂O)₄] (where M=Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, Ca²⁺, Cu²⁺ and Zn²⁺) were investigated by the density functional theory without restrictions for their geometry. The metal binding capability was evaluated using the binding energy, and the effect of nature of the metal on the binding properties was also studied. The results of the calculations showed that the coordination ability of a donor molecule towards different metal ions increased in proportion to their ionization potential. In addition, based on the extraction distribution coefficient, we found that 12-crown-4 can selectively extract Cu²⁺ and Be²⁺ ions from aqueous solutions of mixed cations. Obviously, the stability of complexes and the extraction power of extractants depend greatly on the nature of the metal ions. Calculation results from our study could be used to predict the extraction power of this crown ether and could play a guiding role in planning experiments.     

Transition metal complexes of 2-Carbethoxypyridine (Ethyl picolinate)

Summary A variety of metal(II) complexes of 2-carbethoxypyridine (L) have been prepared and characterised. With metal(II) chlorides the bis complexes can be formulated [ML₂Cl₂]^o (M=Cu^II, Ni^II, Co^II, Fe^II or Mn^II). The complexes are six-coordinate with 2-carbethoxypyridine acting as a bidentate ligandvia the pyridine nitrogen and the carbonyl group of the ester. The chloro complexes are nonelectrolytes in nitroethane; magnetic susceptibility measurements, i.r. and d-d electronic spectra are reported. With metal(II) perchlorate salts the complexes can be formulated as six-coordinate [ML₂ (OH₂)₂] [ClO₄]₂ species containing ionic perchlorate. The ester exchanges of some of these complexes with a variety of primary alcohols have been investigated.     

Iron(III) complexes on the basis of azomethine derived from 4,4′-dodecyloxybenzoyloxybenzoyl-4-oxy-2-hydroxybenzaldehyde

This work deals with the synthesis and investigation of phase behavior of iron(III)-containing complexes of linear azomethine derived from 4,4′-dodecyloxybenzoyloxybenzoyl-4-oxy-2-hydroxybenzaldehyde with NO₃⁻, PF₆⁻, Cl⁻, and BF₄⁻ counterions. All semiproducts and target substances are characterized by TLC, elemental analysis, IR and NMR spectroscopy, and melting points. It is established that the reaction of Schiff base with metal salts at room temperature leads to the formation of complexes having presumably the linear structure. Phase behavior of the compounds obtained depending on the nature of counterion was studied.     

Das Verhalten von Organosulfonylchloriden gegenüber reinen und substituierten Metallcarbenylen

Mono- and binuclear carbonyls of 5^th, 6^th and 8^th group transition metals react with organosulfonyl chlorides, RSO₂Cl, to form organosulfinato metal chlorides with, in the case of electronegative R (R = CF₃), metal(II) and, in the case of electropositive (R = p?CH₃C₆H₄), metal(II) or (III). Bis(organosulfinato) complexes are obtainable from metal(II) chlorides and sodium organosulfinates. In all these new sulfinato compounds the ligand is bound to the metal through both its oxygen atoms; this is deduced from the IR spectra.     

Complexation of 4′-nitrobenzo-15-crown-5 with Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript> and Ba<Superscript>2+</Superscript> metal cations in acetonitrile-methanol binary solutions

The complex formation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, 4′-nitrobenzo-15C5, were studied in acetonitrile (AN)-methanol (MeOH) binary mixtures at different temperatures using conductometric method. The results show that 4′-nitrobenzo-15C5 forms 1:1 [ML] complexes with Mg²⁺, Ca²⁺ and Sr²⁺ metal cations in solutions. But in the case of Ba²⁺ cation a 1:2 [ML₂] complex is formed in these solvent systems. The stability of the complexes is sensitive to the solvent composition and a non-linear behavior was observed for variation of logK _f of the complexes versus the composition of the binary mixed solvents. The stability constants of complexes decrease suddenly with increasing the concentration of methanol in this binary system. The values of thermodynamic parameters (ΔH _c^° and ΔS _c^°) for formation of (4′-nitrobenzo-15C5.Mg)²⁺, (4′-nitrobenzo-15C5.Ca)²⁺ and (4′-nitrobenzo-15C5.Sr)²⁺ complexes were obtained from temperature dependence of the stability constants and the results show that these parameters are affected by the nature and composition of the mixed solvents. A non-linear behavior is observed between the ΔS _c^° and the composition of the mixed solvents.     

Liquid-liquid extraction of metal ions with tris (2,6-dimethoxyphenyl) phosphine and its quaternary phosphonium salts

The extraction of various metal ions from hydrochloric acid solutions with tris(2,6-dimethoxyphenyl)phosphine, [2,6-(MeO)₂C₆H₃]₃P, abbreviated to (2,6-MeOPh)₃P, and its tertiary and quaternary phosphonium salts were studied. A series of phosphonium salts, [(2,6-MeOPh)₃PH]⁺ClO^?₄, [(2,6-MeOPh)₃PR]⁺Br^? and {[(2,6-MeOPh)₃P]₂R′}²⁺ (Br^?)₂, where R = C₁₂H₂₅, C₁₈H₃₇ or C₆H₅CH₂ and R′ = p-CH₂C₆H₄CH₂, (CH₂)₃ and (CH₂)₁₀, were synthesized and applied to an anion exchanger for chloro complex anions of various metal ions. (2,6-MeOPh)₃P and [(2,6-MeOPh)₃PR]⁺Br^? were found to be effective for the extraction of metal ions such as iron(III), gold(III) and gallium(III), forming tetrachloro complex anions of the M^IIICl^?₄ type. The extractabilities of the doubly charged cationic quaternary phosphonium salts [{(2,6-MeOPh)₃P}₂R′]²⁺ (Br^?₂, were found to be superior to those of the singly charged cationic phosphonium salts for metal ions such as cadmium(II), platinum(II) and palladium(II), forming a tetrachloro complex doubly charged aion of the M^IICl^2?₄ type. Most of the metal ions are extracted through ion-pair formation between their chloro complex anions and the phosphonium cations.     

Salting-out thin-layer chromatography of transition metal complexes. IV: Effect of sorbent on the behaviour of mixed aminocarboxylato cobalt (III) complexes

Summary From literature data for 14 mixed aminocarboxylato cobalt(III) complexes, the effect of the sorbent on R_M values, salting-out efficiency (m) and separation factors () of adjacent members of homologous series was investigated in salting-out, thin-layer chromatography on silica gel, polyacrylonitrile and cellulose sorbents, using ammonium sulphate solutions as developers. For complexes belonging to the same homologous series, linear dependence was found between R_M,m and log values, respectively, on two different sorbents. Polyacrylonitrile was shown to be the most suitable sorbent for the separation of the complexes since it gave the highest values for R_M,m and .     

Synthesis and electrochemical characterization of complexes of 1,2-bis[2-(pyridylmethylideneamino)phenylthio]ethanes with transition metals (CoII, NiII, CuII)

Transition metal (Ni^II, Co^II, and Cu^II) complexes with 1,2-bis[2-(3-pyridylmethylideneamino)phenylthio]ethane (1) and 1,2-bis[2-(4-pyridylmethylideneamino)phenylthio]ethane (2) were synthesized for the first time by slow diffusion of solutions of compounds 1 or 2 in CH₂Cl₂ into solutions of MX₂ · nH₂O (M = Ni, Co, or Cu; X = Cl or NO₃; n = 2 or 6) in ethanol. The reactions with Co^II and Cu^II chlorides afford complexes of composition M(L)Cl₂ (L = 1 or 2). The reactions of compound 1 with Ni^II salts produce complexes with 1,2-bis(2-aminophenylthio)ethane. The molecular structure of dinitrato[1,2-bis(2-aminophenylthio)ethane]nickel(ii) was confirmed by X-ray diffraction. The ligands and the complexes were investigated by cyclic voltammetry and rotating disk electrode voltammetry. The initial reduction of the complexes proceeds at the metal atom. The oxidation of the chlorine-containing complexes proceeds at the coordinated chloride anion. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 350–355, February, 2008.     

Enzyme-polyelectrolyte complex: Salt effects on the reaction of urease with polyallylamine

The effects of inorganic mono- and divalent salts of different types on how the cation polyelectrolyte polyallylamine hydrochloride (PAA) binds with the oligomer enzyme urease were studied. It was shown that in solutions of the monovalent salts NaCl, KCl, and NH₄Cl, polyelectrolyte-protein complexes formed by electrostatic interactions, which decreased monotonically as the salt concentrations increased according to the classic law of statistical physics, correlating the Debye radius with the ionic strength of the solution. In solutions of the divalent salts Na₂SO₄ and (NH₄)2_SO₄, the efficiency of the formation of the polyelectrolyte-protein complexes changed abruptly (the enzyme was drastically activated) at low salt concentrations (∼0.6–0.8 mM), which was not consistent with the classic theory of charge interactions in solutions with different ionic strengths. Turbidimetric titration at different salt concentrations in the given range revealed a high aggregative ability for sulfates and low ability for chlorides. It was concluded that the anomalies in the concentration dependence of the enzyme activity and aggregative ability were related to the formation of stable bonds PAA to the divalent SO₄²⁻ anion, which increased drastically when the ratio of anion concentration to the number of positively charged PAA monomers in solution reached 1: 2.     

Study on the Salting-out Effect using Silica Species by FAB-MS

The salting-out effect has been characterized on the basis of the relative peak intensity of silica species, observed by FAB-MS (fast atom-bombardment mass spectrometry) in solutions of sodium chloride, sodium nitrate, sodium sulfate, calcium chloride, lithium chloride and magnesium chloride. A critical change in the peak intensity ratios of the linear and cyclic tetramers of silica against the sodium ion (Na⁺) concentrations was observed at Na⁺ concentration between 0.1 and 1 mol⋅dm⁻³. The degrees of the changes of these peak intensity ratios increased in the order NaNO₃ < Na₂SO₄ < NaCl. In CaCl₂ solutions, these peak intensity ratios changed significantly at Ca²⁺ concentrations between 0.05 and 0.5 mol⋅dm⁻³. The salting-out effect observed is the total change in the concentration of silica brought about by complex factors, such as the changing solubility of silicate complexes, the increases in the concentrations of different kinds of soluble silicate complexes induced by changes in the hydrophobicity and hydrophilicity of the solution, and the contribution of hydrolysis.     

Interactions between Ni ions and tetrapeptides containing (Asp/Lys)HisGly(l/d)His sequence

A series of linear tetrapeptides containing two histidyl residues in positions 2 and 4 with different chirality: DHGH, DHG(d-His), KHGH, KHG(d-His), Ac-DHGH-NH₂, Ac-DHG(d-His)-NH₂, Ac-KHGH-NH₂, and Ac-KHG(d-His)-NH₂ were synthesized, characterized and their binding properties towards Ni²⁺ were investigated. To establish the stoichiometry and the stability of the resulting Ni²⁺ complexes, potentiometric titrations were carried out. The coordination mode of the complexes formed was investigated by performing extensive spectroscopic analyses (UV–Vis, CD) in strict correlation with the potentiometric results. The effects of the nature of the first amino acid (Lys versus Asp) and of the N-terminal amino group acetylation were determined. A careful comparison of the Ni²⁺ coordination abilities of the linear peptides provides a specific insight into the impact of the chirality of the C-terminal histidine residue (His⁴) on the metal binding properties.     

Spectroscopic and Solution Studies of Some Transition Metal Complexes of New 4-Hydroxy Coumarin Semi- and Thiosemicarbazone Complexes

Two new ligands, 4-hydroxy coumarin-3-thiosemicarbazone (H₂L¹) and 4-hydroxy coumarin-3-semicarbazone (H₂L²) were synthesized and used for the preparation of a series of transition metal complexes (Cr³⁺, Co²⁺, Ni²⁺, Cu²⁺, and Fe³⁺), derived from these ligands. These complexes have the forms [ML¹Cl₂]·nX (1–5) and [ML²Cl]·nX (6–9) (X = H₂O or ethanol). The structures of these complexes were elucidated by elemental analyses, IR, UV–Vis, and electrical conductivity, as well as magnetic susceptibility measurements and thermal analyses. IR spectral data indicates that in all complexes, the ligands act as monobasic tridentate, coordinated through keto oxygen or sulfur, azomethine nitrogen and deprotonated phenolic oxygen atom. On the basis of other physicochemical investigations, tetrahedral or square planar geometries are assigned for Cu²⁺ complexes in monomeric structures. In the case of the Co²⁺, Ni²⁺ and Fe³⁺ complexes, octahedral stereochemistries in monomeric structures are suggested. The dissociation constants of the ligands and the stability constants of their Cu(II), Co(II), Ni(II), and Fe(III) complexes have been also determined using potentiometric pH-metric titration in mixed solvents of dioxane: H₂O and DMF: H₂O with different ratios and different temperatures.     

Reaction of ZnCl2 and HgCl2 metal salts with a bidentate Schiff base ligand in methanol solution, X-ray crystal structure, and theoretical studies

From the reaction of ZnCl₂ and HgCl₂ metal salts with (E)-4-chloro-N-(pyridine-2-ylmethylene)benzeneamine (L) in methanol solution, two binuclear Schiff base complexes were prepared. Both complexes were characterized by elemental analysis, UV–Vis, and IR spectrophotometry. X-ray crystal structure analysis showed that metal ion in the resulting centrosymmetric dinuclear ML₂Cl₄ complexes is in a distorted trigonal bipyramidal and a distorted square pyramidal coordination environment in the case of Zn(II) and Hg(II) metal ions, respectively. Three types of reaction between MCl₂ salts and ligand L producing three different types of products—ML₂ ²⁺, MLCl₂, and M₂L₂Cl₄—were simulated in both the gas phase and solution. The gas phase calculations at DFT (B3LYP) level of theory using SDD, CEP-121G, and LanL2DZ basis sets showed that the binuclear M₂L₂Cl₄ complexes are more stable than corresponding mononuclear MLCl₂ complexes. Furthermore, both the gas phase and solution studies showed that the formation of M₂L₂Cl₄ complexes from the metal cations, chloride anion, and ligand molecule is energetically more favored than that of MLCl₂ and ML₂ ²⁺ complexes.     

Mesomorphic azomethine complexes of Iron(III) based on 4,4′-dodecyloxybenzoyloxybenzoyl-4-salicylidene-2-aminopyridine

A new series of liquid crystalline (LC) complexes Fe(III) based on azomethine 4,4′-dodecyloxybenzoyloxybenzoyl-4-salicylidene-2-aminopyridine with counter-ions PF₆^?, NO₃^?, Cl^?, BF₄^?, ClO₄^?, CNS^? and SO₄^2– was synthesised. According to elemental analysis, FT-IR, ¹H-NMR and mass spectrometry (MALDI ToF), it was found that bi(ligand) Fe(III) complexes were formed with octahedral packing of the metal ion. The presence of the counter-ion in the complexes was confirmed by Infrared spectroscopy. The thermotropic LC properties were investigated by differential scanning calorimetry (DSC) and polarising optical microscopy (POM). All the seven complexes in this series exhibit thermotropic mesophases.     

Metal Chelates of Cerium (III), Thorium(IV) and Dioxouranium(VI) with Some Heterocyclic AZO Dyes; Potentiometric and Spectrophotometric Studies

ABSTRACT

The stepwise formation constants of Ce³⁺, Th⁴⁺ and UO₂ ²⁺ complexes with four azo compounds based on I-phenyl-2, 3-dimethylpyrazoline-5-one nucleus namely; 4-phenylazo- (2-hydroxy, 5-x) 1-pheny1-2, 3-dimethy1-pyrazoline-5-one, where x= H (1), OH (II), COOH (III) and NH₂ (IV) have been determined potentiometrically at different temperatures and ionic strengths in 30% (v/v) ethanol-water solutions, then the thermodynamic parameters are calculated.

Negatives values of both ∠H and ∠G are obtained indicating the exothermic and spontaneous nature of complexation reactions, whereas positive values of ∠S show that entropy consideration favour complex formation. The study at different ionic strengths shows that an increase in the latter causes a decrese in the pK values. The azo compounds are also tested as new reagents for the spectrophotometric determination of Ce³⁺, Th4⁺ and UO₂ ²⁺ ions in synthetic and natural solutions by extensive investigation of the optimum conditions favoring the formation of colored complexes.     

Synthesis and study of the structure of new 3d-metal coordination compounds with substituted 2-amino-4(5H)-ketothiophens

A series of new 3d-metal complexes based on 2-amino-3-(1-methylbenzimidazol-2-yl)-4(5H)-ketothiophen (HL¹) and 2-amino-3-(2-benzothiazolyl)-4(5H)-ketothiophen (HL²) were synthesized. Compounds of the general formulas [ML₂] and [M(HL¹)₂Cl₂] (where M = Co²⁺, Ni²⁺, Zn²⁺, Cu²⁺) were prepared by the reaction of the above mentioned ligands with the corresponding acetate (for [ML₂]) or chloride (for [M(HL¹)₂Cl₂]) salts in a methanol or a methanol–chloroform medium. The choice of the anion in the initial metal salt, as well as the selection of the ligand, is crucial for obtaining coordination compounds with a neutral or deprotonated form of the 2-amino-4(5H)-ketothiophens. Thus, in contrast to HL¹, complexes with the neutral form of HL² cannot be obtained under the same conditions. All the complexes were studied by spectroscopic methods and X-ray crystallography (for [CuL¹₂] · H₂O). The coordination polyhedron of the copper atom is formed by four nitrogen atoms from two ligand anions and the geometry of the coordination sphere is intermediate between tetrahedral and square-planar.     

Effect of hydrogen bonding of solvent on the thermodynamic stability of cadmium ethylenediamine complexes

Changes in the stability of the cadmium(ii) ethylenediamine complexes in mixed water—DMSO solvents were studied by pH-metry and calorimetry. Complex cations [Cd(en)]²⁺, [Cd(en)₂]²⁺, and [Cd(en)₃]²⁺ are formed in aqueous solutions, and the [Cd(en)₄]²⁺ complex with a partially dentate ligand is stable in DMSO. An increase in the DMSO content in a solvent increases the stability of the complexes. The maximum increase in logK is observed for coordinatively saturated compounds. The thermodynamics of complexation is discussed from the viewpoint of solvation approach. Principal differences in the influence of aqueous-alcohol and aqueous-aprotic solvents on the stability of the metal amino complexes were revealed. Protolytic solvents exert a destabilizing effect on the multiligand complexes, because the coordination sphere is involved in H bonding.     

Metal complexes of tetradentate azo-dye ligand derived from 4,4′-oxydianiline: Preparation,structural investigation,biological evaluation and MOE studies

The Cr (III), Mn (II), Fe (III), Co (II), Ni (II), Cu (II) and Cd (II) complexes were prepared by reaction of its metal chlorides with new azo-dye ligand (H₂L). The ligand derived from 4,4′-oxydianiline and 2-amino-4-chlorophenol was synthesized in a 1:2 molar ratio. The structure of the ligand and its metal complexes was investigated using different tools such as elemental analysis (C, H, N and M), molar conductivity, IR, UV–vis, ¹H-NMR, mass spectrometry and thermogravimetric and differential thermogravimetric studies. The data showed that the ligand acted as a N,N,O,O-binegative tetradentate ligand. All metal complexes had a octahedral structure as depicted by spectral and elemental analyses. The conductivity data showed the electrolytic nature of the Cr (III) and Fe (III) complexes while the other complexes were nonelectrolytes. Thermal analysis studies showed the decomposition of the complexes in four to five steps with the weight loss of hydrated water in the first decomposition step followed by the coordinated water and ligand molecules. Biological activity was tested for the prepared compounds against four bacterial species (Bacillus subtilis, Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa) and against two fungal species (Aspergillus fumigatus and Candida albicans). Also, all complexes were screened for anticancer activities against a breast cancer (MCF-7) cell line. The [Co(L)(H₂O)₂] complex showed the lowest IC₅₀ value. Molecular docking is a key tool in computer drug design. Therefore, investigation of protein receptors and ligand interaction plays a vital role in the design of structurally based drugs. As a result, docking studies were investigated for H₂L ligand, [Mn(L)(H₂O)₂] and [Ni(L)(H₂O)₂] complexes with 5KBC, 3V7B and 4G9M receptors.