液相沉积法制备光催化活性TiO2薄膜和纳米粉体

采用液相沉积法，在35℃通过向六氟钛酸铵水溶液中添加硼酸和结晶诱导剂锐 铁矿型TiO2纳米晶，沉积出具有光催化活性的Ti02薄膜和纳米粉体．用XRD，AFM， 阶梯仪,UV-vis，BET法对Ti02薄膜和粉体的沉积条件、结构、厚度和性能进行了测 定和表征，并用亚甲兰的降解，评价了TiO2薄膜和纳米粉体的光催化活性．结果表 明，当反应物六氟钛酸铵与硼酸的摩尔比为1：2—1：4时，沉积的粉体和薄膜含有 锐钛矿相Ti02；经300℃热处理的Ti02薄膜和纳米粉体具有最高的光催化活性，它 的光催化活性是未经热处理前的5倍．本文还解释了经300℃热处理的薄膜和纳米粉 体具有最高光催化活性的原因．     

液相沉积法制备光催化活性TiO2薄膜和纳米粉体

采用液相沉积法 ,在 3 5℃通过向六氟钛酸铵水溶液中添加硼酸和结晶诱导剂锐钛矿型TiO2 纳米晶 ,沉积出具有光催化活性的TiO2 薄膜和纳米粉体 .用XRD ,AFM ,阶梯仪 ,UV vis ,BET法对TiO2 薄膜和粉体的沉积条件、结构、厚度和性能进行了测定和表征 ,并用亚甲兰的降解 ,评价了TiO2 薄膜和纳米粉体的光催化活性 .结果表明 ,当反应物六氟钛酸铵与硼酸的摩尔比为 1∶2～ 1∶4时 ,沉积的粉体和薄膜含有锐钛矿相TiO2 ;经 3 0 0℃热处理的TiO2 薄膜和纳米粉体具有最高的光催化活性 ,它的光催化活性是未经热处理前的 5倍 .本文还解释了经 3 0 0℃热处理的薄膜和纳米粉体具有最高光催化活性的原因     

Fe掺杂对纳米TiO2薄膜的结构与光催化性能的影响

采用溶胶-凝胶法制备了Fe掺杂的TiO2薄膜,利用X射线光电子能谱、X射线衍射技术、显微共聚焦拉曼光谱、紫外可见光谱和原子力显微镜等对薄膜进行表征,以甲基橙为反应模型对光催化活性进行测试。 结果表明,在300~600 ℃焙烧时,TiO2以锐钛矿结构存在,700 ℃焙烧时出现金红石结构。 随掺铁量和焙烧温度的增加,Fe/TiO2薄膜的表面粗糙度和晶粒尺寸均逐渐增大;随镀膜层数的增加,Fe/TiO2薄膜光谱吸收向可见光方向移动;较低含量的铁掺杂改善了TiO2薄膜的光催化活性,而较高含量的铁掺杂则使TiO2薄膜的光催化活性下降,掺铁量为0.1%时Fe/TiO2薄膜的光催化活性最好。     

控制胶体合成法制备掺铁TiO_2粉末及光催化降解甲基橙

分别采用控制胶体合成法和溶胶-凝胶法制备了2种不同掺铁方式的TiO2粉末,并用XRD、TEM、BET、UV-Vis、FS等技术对样品进行了表征。在紫外光照射下,以甲基橙溶液的光催化降解反应为探针,研究了掺Fe离子浓度、包覆的次数、不同掺杂方式对样品光催化活性的影响。结果表明,以均匀掺铁TiO2(铁含量大于0.02mol%)干凝胶粉末为载体,采用控制胶体合成法制备了具有P-N结型结构的非均匀掺铁TiO2粉末,其光催化活性较均匀掺杂TiO2粉末明显提高,并且随着包覆次数(≤3次)的增加而增强,以0.04mol%掺铁TiO2粉末包覆3次后制备的样品具有最佳光催化活性,其表观速率常数是未掺杂的TiO2粉末的5.32倍,是具有相同Fe含量的均匀掺杂TiO2粉末的4.58倍。     

液相沉积法制备可磁分离复合光催化剂纳米球及其催化性能

采用反胶束和液相沉积法制备了一种可磁分离的复合光催化剂纳米球TiO2@SiO2@NiFe2O4,并运用X射线衍射和透射电镜对样品进行了表征.结果表明,NiFe2O4纳米粒子被包裹在SiO2内形成磁性SiO2@NiFe2O4纳米球载体,纳米TiO2粒子沉积于其表面,形成TiO2光催化壳层.光降解实验结果表明,当沉积液中硼酸与六氟钛酸铵的摩尔比为4,焙烧温度为300C时,制备的纳米球催化剂表现出最佳的光催化活性.     

Fe2O3掺杂TiO2薄膜对甲基紫溶液光催化降解

甲基紫是一种相当稳定的有机物,能被TiO2光催化降解。本采用sol-gel工艺在玻璃表面制得了均匀透明的TiO2薄膜,研究了热处理温度、涂覆层数、掺杂Fe2O3等制备工艺,以及溶液pH值和助催化剂H2O2等因素对TiO2薄膜的光催化性能和稳定性影响。结果表明,掺Fe2O3的TiO2薄膜对甲基紫的降解率明显优于未掺Fe2O3的TiO2薄膜。     

氟掺杂纳米 TiO2 薄膜的低温制备及其光催化性能

 以氟化铵为氟源, 采用水热法制得氟掺杂 TiO2 (FTO) 溶胶, 并通过浸渍提拉法在低温下制备了 FTO 薄膜. 其中在 120 oC 下水热处理 10 h 所得的 TiO2 溶胶制备的薄膜均匀透明, 具有较高的光催化活性. 氟掺杂后的 TiO2 晶粒尺寸并未发生明显变化, 但薄膜的光催化活性显著升高. F/Ti 摩尔比为 0.01 时, FTO 薄膜的光催化活性最高, 比 TiO2 薄膜的活性升高了 23%. X 射线光电子能谱结果表明, 氟掺杂 TiO2 中的氟离子存在晶格取代掺杂和表面化学吸附两种形式. 这两种氟离子的共同作用是 FTO 薄膜光催化活性升高的主要原因.     

溶胶-凝胶自蔓燃法制备铁掺杂纳米TiO_2光催化剂

为了研究溶胶-凝胶自蔓燃法(SHS)制备的铁掺杂纳米TiO2的光催化活性,以TiCl4为原料制备了Fe3+掺杂TiO2光催化剂,分别在低压汞灯、中压汞灯和太阳光照射下进行了亚甲基蓝降解实验。XRD和SEM显示,以TiCl4为前驱体,n(Ti):n(柠檬酸):n(NH4NO3)=1:3:5,经250℃自蔓燃和500℃热处理后,TiO2呈疏松、多孔的灰白色锐钛型粉体,粒径约为20nm;在不同光源作用下,掺铁摩尔分数为0.02%的TiO2催化活性均最大;亚甲基蓝溶液在掺铁分数为0.02%的TiO2作用下,经太阳光照90min后降解率达到了96.1%,为纯TiO2的1.78倍。     

掺铁TiO2气相光催化降解正己烷的研究

利用钛酸丁酯水解浸渍、共沉淀、水热等方法制备了掺铁TiO2纳米复合粉体材料并通过XRD、BET、TEM等手段作了表征，研究了掺铁TiO2对气相光催化降解正己烷反应的活性并和商品TiO2 Degussa P-25作了比较，考察了制法、掺铁量、焙烧温度等的影响。结果表明，和大多数液相反应不同，铁的掺入抑制了TiO2对正己烷的气相光催化降解。水热处理能较大程度地改善掺铁和未掺铁TiO2的光催化性能。P-25对正己烷的气相光催化活性则明显小于未掺铁TiO2样品，也小于某些掺铁样品。     

用溶剂热处理法制备TiO2纤维及其光催化降解甲基橙的活性

 在不同温度下，用甘油常压热处理层状水合钛酸（H2Ti4O9·nH2O）制备了TiO2纤维，并用XRD进行了表征．结果表明，经60，150和250℃甘油热处理后，样品的主晶相均为2Ti8O17，得到有较大比表面积和有微孔结构的TiO2纤维；当处理温度为150℃时，制得的TiO2纤维比表面积由原来的30m2／g增大到127m2／g，其中小于1nm的微孔比表面积为79m2／g．以甲基橙为代表物，考察了TiO2纤维的光催化活性．与在空气中热处理相比，甘油常压热处理提高了TiO2纤维的光催化氧化活性，其降解甲基橙的能力优于P－25．     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.