Microwave Spectrum and Dipole Moment of 1,3‐dioxolane in the Hindered‐Pseudorotation States v = 0, 1, 2, and 3

The microwave spectrum of 1,3dioxolane (C₃H₆O₂) in the ground and first three excited states of hindered pseudorotation was studied. The transitions corresponding to the _b, _c, and _a components of the dipole moment were identified. The spectrum was analyzed using numerical diagonalization of the effective rotational Hamiltonian for four interacting states of hindered pseudorotation. The rotational constants, centrifugal distortion constants, the constants of interaction between general rotation and hindered pseudorotation, and the distances between the quasidegenerate vibrational levels ₀₁ = 64840.5, ₁₂ = 122231.7 and ₂₃ = 119732.7 MHz are determined. From the Stark effect of microwave transitions, the dipole moment components (in Debye units) in the hinderedpseudorotation states v = 0, 1, 2, and 3 are determined: 0|_b|0 = 1|_b|1 = 1.22, 2|_b|2 = 1.20, 3|_b|3 = 1.21, 0|_c|1 = 0.77, 2|_c3 = 0.66, and 1|_a|2 = 0.19.     

Redox Properties of Trinuclear Osmium Carbonylhydride Clusters with Unsaturated Ligands

Schemes of redox transformations were proposed for osmium carbonylhydride clusters: trinuclear (-H)Os₃(-CR = CHR')(CO)_{1 0} (R = R' = H, Ph; R = H, R' = Ph), (-H)₂Os₃(₃-L)(CO)₉ (L = C = CHPh, CHCPh), tetranuclear CpMnOs₃ (-CH = CHPh)(-H)(-CO)(CO)_{1 1}, and trinuclear Os₃(₃-C = CHPh)(CO)₉. Two-electron reduction of the trinuclear clusters results in elimination of the unsaturated ligand with preservation of the metal framework.     

Addition of HCl to a Cluster-Bound Vinylidene Ligand: Preparation and Structure of Ru5(μ3-SMe)(μ3-CMe)(μ-Cl)(μ-SMe)(μ-PPh2)2(CO)9·PhMe

Addition of aqueous HCl to Ru₅( ₃-C=CH₂)(-SMe)₂(-PPh₂)₂(CO)₁₀ afforded the structurally characterized carbyne complex Ru₅( ₃-SMe)( ₃-CMe)(-Cl)(-SMe)(-PPh₂)₂(CO)₉, formed by addition of H to the vinylidene ligand; a Cl atom bridges an Ru–Ru bond.     

Size spectra for trace elements in urban aerosol particles by instrumental neutron activation analysis

Size-fractionated aerosol samples collected with micro-orifice impactors at Camden, NJ, a heavily industrialized urban area, and at two sites near Washington, DC, were analyzed for elemental constituents determined instrumentally from short-lived neutron activation products. A least-squares peak-fitting method was used with impactor calibration data to determine log-normal distribution parameters, i.e., mass median aerodynamic diameter (MMAD) and geometric standard deviation (_g) for particles bearing S, V, Br, and I. For these elements, MMADs ranged from 0.24 to 0.65 m; 0.23 to 0.53 m; 0.22 to 0.61 m, and 0.20 to 0.48 m, respectively.     

Synthesis of Platinum-Triruthenium Clusters Using the Zero-Valent Platinum Reagent Pt(nb)3: X-Ray Crystal Structures of Ru3Pt(CO)11(P-iPr3)2, Ru3Pt(μ-H)(μ3-η3-MeCCHCMe)(CO)9(P-iPr3), Ru3Pt(μ3-η2-PhCCPh)(CO)10(P-iPr3), Ru3Pt(μ-H)(μ4-N)(CO)10(P-iPr3) and Ru3Pt(μ-H)(μ4-η2-NO)(CO)10(P-iPr3)

The complexes Pt(nb)_3-n(P-iPr₃)_n (n=1, 2, nb=bicyclo[2.2.1]hept-2-ene), prepared in situ from Pt(nb)₃, are useful reagents for addition of Pt(P-iPr₃)_n fragments to saturated triruthenium clusters. The complexes Ru₃Pt(CO)₁₁(P-iPr₃)₂ (1), Ru₃Pt(-H)(₃-³-MeCCHCMe)(CO)₉(P-iPr₃) (2), Ru₃Pt(₃-²-PhCCPh)(CO)₁₀(P-iPr₃) (3), Ru₃Pt(-H)(₄-N)(CO)₁₀(P-iPr₃) (4) and Ru₃Pt(-H)(₄-²-NO)(CO)₁₀(P-iPr₃) (5) have been prepared in this fashion. All complexes have been characterized spectroscopically and by single crystal X-ray determinations. Clusters 1–3 all have 60 cluster valence electrons (CVE) but exhibit differing metal skeletal geometries. Cluster 1 exhibits a planar-rhomboidal metal skeleton with 5 metal–metal bonds and with minor disorder in the metal atoms. Cluster 2 has a distorted tetrahedral metal arrangement, while cluster 3 has a butterfly framework (butterfly angle=118.93(2)°). Clusters 4 and 5 posseses 62 CVE and spiked triangular metal frameworks. Cluster 4 contains a ₄-nitrido ligand, while cluster 5 has a highly unusual ₄-²-nitrosyl ligand with a very long nitrosyl N–O distance of 1.366(5) Å.     

Effect of Surfactants on the Immobilization of 4-(2-Pyridylazo)resorcinol on Silochroms

The effect of cationic surfactants (cetyltrimethylammonium bromide, cetylpyridinium bromide, and tetrabutylammonium perchlorate) and a nonionic surfactant (OP-7) on the conditions of the immobilization of 4-(2-pyridylazo)resorcinol (PAR) on three types of silica gel (Silochrom S-120 (200–350 m), Silochrom S-120 (315–500 m), and Silochrom S-80 (200–350 m)) was studied. It was found that OP-7 does not affect the adsorption of surfactants. The effect of cationic surfactants increases in the order tetrabutylammonium perchlorate < cetyltrimethylammonium bromide < cetylpyridinium bromide. The adsorption activity of silica gels increases in the order Silochrom S-120 (315–500 m) < Silochrom S-80 (200–350 m) < Silochrom S-120 (200–350 m). Cetylpyridinium bromide provides full immobilization of PAR on silica gel Silochrom S-120 (200–350 m) in the pH range 2–9.     

Preparation of micron-size monodisperse polymer particles by seeded polymerization utilizing the dynamic monomer swelling method

Utilizing a new type of monomer swelling method, 6.1 m-size monodisperse polymer particles were prepared by seeded polymerization. 1.8 m-size monodisperse polystyrene (PS) seed particles (1.8 m in size) were prepared by dispersion polymerization in ethanol-water (80/20, v/v) medium in the presence of poly(acrylic acid) as stabilizer with 2,2-azobisisobutyronitrile as initiator. The PS seed dispersion was mixed with ethanol-water (60/40, v/v) solution dissolving styrene (S) monomer, benzoyl peroxide as initiator, and poly(vinyl alcohol) as stabilizer. By slow, continuous, dropwise addition of water with a micro feeder into the mixture, the PS particles absorbed the many S monomers, which were separated from the medium and swelled from 1.8 m to 8.4 m while keeping the monodispersity high. We named this procedure the dynamic swelling method. Then, the seeded polymerization of the absorbed S monomer was carried out in the presence of NaNO₂ as water-solube inhibitor.Part CXXII of the series Studies on Suspension and Emulsion.     

Laser Sintering of SnO2 : Sb Sol-Gel Coatings

Sb doped sol-gel SnO2 single layers (thickness 100 nm) were prepared from alcoholic solution and deposited via a dip coating process on fused silica substrates. The coatings have been sintered at a typical rate of 10–15 cm2/s by CO2 laser irradiation. The laser spot was scanned in one direction at a speed of 15,000 cm/s and the sample was moved in a perpendicular one at a speed up to 250 mm/s. The temperature of the topmost 10 m layer was monitored by a fast pyrometer (s resolution). The following properties of the coatings have been determined: the electrical resistivity , the carrier density n, and mobility , the structure, the thickness, the mesoscopic and micromorphology and the density. The sintering by CO2 laser radiation is mainly a thermal driven process. At T 500°C it allows to obtain coatings with a smaller resistivity (6.8×10–3 cm) than those produced by conventional furnace firing (el2.9×10–2 cm). The results are discussed in terms of particle size and packing density.     

Crystal structure and spectroscopic study of di-μ(1,1)-azido-di-μ(0,0-nitrato)tetrakis(3,5-lutidine)dicopper(II), [Cu(N3) (NO3) (3,5-lutidine)2]2

A mixed ligand 12 complex of copper(II) azide with 3,5-lutidine, namely di-(1,1)-azido-di(0,0)-nitrato)tetrakis(3,5-lutidine)dicopper(II) has been prepared and characterized by X-ray crystallographic and spectroscopic methods. The dimeric molecule, which possesses a crystallographic inversion center, contains two(1,1) bridging azido ligands. Each copper(II) atom in the cyclic Cu₂N₂ unit is further coordinated by two oxygen atoms from two(0,0-nitrato) bridges at Cu-O distances of 2.465(3) and 2.568(3) Å and two nitrogen atoms from the lutidine molecules [Cu-N=2.003(3) and 2.012(3) Å] to give a distorted tetragonal bipyramid. Both azido ligands are linear [N-N-N angle=179.0(4) and asymmetric N-N=1.207(4) and N-N=1.135(5) Å]. The azido bridges produce a rather short Cu Cu distance of 3.013(2) Å. Infrared and electronic data are presented and discussed.     

C-C bond formation at polynuclear metal centers

Studies on C-C bond formation between simple hydrocarbon species such as CH₂, C=CH₂, CH=CH₂, CH₂=CH₂, CH₂=C=CH₂ and CHCH at a diruthenium center suggest that the process is promoted when the dimetal center can readily compensate for the two electrons lost in the formation of the new C-C bond. Thus, whereas -CH₂ and ethene combine only under forcing conditions, the combination of -CH₂ with allene or ethyne, which have additional -electrons available for coordination, occurs readily at room temperature. Likewise, the availability of uncoordinated -electrons in -C=CH₂ allows vinylidene to link rapidly with ethene at room temperature. Alkyne complexes [Ru₂(CO)(-RCCR)(-C₅H₅)₂] (R=CF₃ or Ph) react only under vigorous conditions with additional alkyne to give [Ru₂(CO)(-C₄R₄) (-C₅H₅)₂], but give these same species at room temperature in the presence of acid, shown to be due to the intermediacy of highly reactive 30-electron -vinyl cations. Thermally, alkyne linking proceedsvia three-alkyne species [Ru₂(-C₆R₆)(-C₅H₅)₂] to a four-alkyne complex [Ru₂(-C₈R₈)(-C₅H₅)₂], containing an unprecedented C₈ ligand composed of a C₆ ring with a C₂ tail. Treatment of [Ru₂(CO)(-RCCR)(-C₅H₅)₂] with unsaturated metal fragments gives trimetal complexes such as [Ru₃(CO)₅(₃-CF₃CCCF₃) (-C₅H₅)₂]. The MeCN derivative of this species undergoes unusual linking processes on reaction with additional alkyne to giveinter alia [Ru₃(CO)₃(₃-CCF₃){₃-C₃(CF₃)₃}(-C₅H₅)₂], arising from alkyne cleavage, and [Ru₃(CO)₃{₃-C₄(CF₃)₂(CO₂Me)₂}(-C₅H₅)₂], a closo-pentagonal bipyramidal Ru₃C₄ cluster.     

The oxidative addition of diphenylphosphine and monophenylphosphine to the electron-rich rhenium-rhenium triple bond. The isolation and characterization of compounds that contain the four-center Re(μ-X)(μ-PR2)Re cluster (X=halide)

Diphenylphosphine oxidatively adds to the ReRe bonds of Re₂ X ₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) and Re₂Cl₄(-dpam)₂ (dpam=Ph₂AsCH₂AsPh₂) to afford the dirhenium(III) complexes Re₂(-X)(-PPh₂)HX ₃(-LL)₂. The dppm complexes have also been prepared from the reactions of Re₂(-O₂CCH₃)X ₄(-dppm)₂ with Ph₂PH, and a similar strategy has been used to prepare Re₂(-Cl)(-PPh₂)HCl₃(-dmpm)₂ (dmpm=Me₂PCH₂PMe₂) from Re₂(-O₂CCH₃)Cl₄(dmpm)₂. Phenylphosphine likewise reacts with Re₂ X ₄(-dppm)₂ to give Re₂(-X)(-PHPh)HX ₃(-dppm)₂. An X-ray crystal structure determination on Re₂(-Cl)(-PPh₂)HCl₃(-dppm)₂ confirms its edge-shared bioctahedral structure. This complex crystallizes in the space group (No. 148) witha=21.699(3) Å, =84.50(4)°,V=10084(5) ų, andZ=6. The structure was refined toR=0.049 (R _w 0.069) for 5770 data withI>3.0(I). The Re-Re distance is 2.5918(7) Å. Oxidation of the bromide complex Re₂(-Br)(-PPh₂)HBr₃(-dppm)₂ with NOPF₆ produces the unusual dirhenium(III, II) cation [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]⁺ which has been structurally characterized as its perrhenate salt, [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]ReO₄ · 2CH₂Cl₂. This complex crystallizes in the space group (No. 2) witha=14.187(7) Å,b=16.419(5) Å,c=16.729(5) Å, =98.76(2)°, =110.11(3)°, =104.66(3)°,V=3414(6) ų,Z=2. The structure was refined toR=0.040 (R _w =0.051) for 5736 data withI>3.0(I). The presence of a phosphorus-bound [P(O)Ph₂]^– ligand, a linear nitrosyl and a bridging hydrido ligand has been confirmed. The Re-Re distance is 2.6273(8) Å.     

Reactivity and flexibility in platinum metal clusters

The synthesis, structural properties, and fluxional behaviour of platinum-triosmium and platinum-triruthenium clusters derived from Os₃Pt(-H)₂ (CO)₁₀(PR₃) and Ru₃Pt(-H)(-CC ^t Bu)(CO)₉ (dppe) and related species are described.     

Synthesis,characterization and crystal structures of heterometallic trinuclear carbonyl sulfido clusters (η5-Cp)MoFeCo- (CO)8(μ3-S) and [(η5-Cp)Mo]2Fe(CO)7(μ3-S)

HFe2Co(CO)9(3-S) reacts with (5-Cp)Mo(CO)3Cl in refluxing THF to give heterometallic trinuclear clusters (5-Cp)MoFeCo(CO)8(3-S) and [(5-Cp)Mo]2Fe(CO)7-(3-S), which have been characterized by elemental analyses, i.r., 1H- and 13C-n.m.r. and X-ray crystal structure determination. An electrophilic addition–elimination sequence is proposed for their formation.     

Modified method for filling micro-HPLC-columns

Summary A new method is introduced for packing micro-columns with an ID (inner diameter) of 320 m. The advantage of this method is the extraordinary economy of the packing material employed and the high reliability in production. The theoretical plate height ranges from 7 to 8 m for 3 m particles.     

Redox Properties of Rhodium(III) Oxo-Bridged Carboxylate Complexes

Chemical and electrochemical oxidation of rhodium (III) oxo-bridged carboxylate complexes was studied. The chemical [with O₃ and Ce(IV) salts] or electrochemical (at potentials of 1.00-1.20 V) oxidations of the binuclear complexes [Rh₂(-O)(-O₂CCH₃)₂(H₂O)₆]^{2 +} and [Rh₂(-O)(-O₂CCF₃)₂(H₂O)₆]^{2 +} leads to the superoxo complexes [Rh₂(-O)(O₂-)(-O₂CCH₃)₂(H₂O)₅]⁺ and [Rh₂(-O)(O₂ ^-)(-O₂CCF₃)₂(H₂O)₅]⁺ with terminal coordination of O₂-. The trinuclear acetate [Rh₃(₃-O)(-O₂CCH₃)₆(H₂O)₃]⁺, unlike its trifluoroacetate analog [Rh3(₃-O)(-O₂CCF₃)₆(H₂O)₃]⁺, is oxidized only electrochemically at a potential of 1.38 V. The oxidation of [Rh₃(₃-O)(-O₂CCH₃)₆(H₂O)₃]⁺ is reversible and involves formation of an unstable superoxo group O₂ ^- between two Rh₃III(₃-O) cores.     

Hydrogen profiling in thin films using coincident ERD

By using the coincident measurement, an ERD method has been established and used for hydrogen profiling in thin foils. In the present study, 6 MeV has been used as incident particle, the scattered and the recoiled proton from one collision were coincidentally detected at 150 (proton) and 173.9 (). This method has been used for hydrogen profiling of 5.6 m Mylar and 8.6 m aluminium foils. Because of the coincident measurement, the background is largely reduced, and its minimum detection limit is about 0.5% (atomic), lower than the conventional ERD method. The measured depth resolution in 5.6 m Mylar is 0.6 m. It is possible to use this method for hydrogen profiling in thin foils of several micron thickness.     

Lithium and lanthanum complexes with acenaphthylene dianion. Molecular structure of [Li(Et2O)2]2μ2:η3[Li(η3:η3-C12H8)]2 complex

The lithium complex with the acenaphthylene dianion [Li(Et₂O)₂]₂₂:³[Li(³:³-C₁₂H₈)]₂ (1) was synthesized by the reduction of acenaphthylene with lithium in diethyl ether. According to the X-ray diffraction data, compound 1 has a reverse-sandwich structure with the bridging dianion ₂:³[Li(³:³-C₁₂H₈)]₂. Two lithium atoms in complex 1 are located between two coplanar acenaphthylene ligands of the ₂:³[Li(³:³-C₁₂H₈)]₂ ^2– dianion and are ³-coordinated with the five- and six-membered rings. The lanthanum complex with the acenaphthylene dianion [LaI₂(THF)₃]₂(₂-C₁₂H₈) (2) was synthesized by the reduction of acenaphthylene in THF with the lanthanum(iii) complex [LaI₂(THF)₃]₂(₂-C₁₀H₈) containing the naphthalene dianion. The ¹H NMR spectrum of complex 2 in THF-d₈ exhibits four signals of the acenaphthylene dianion, whose strong upfield shifts compared to those of free acenaphthylene indicate the dianionic character of the ligand. The highest upfield chemical shift belongs to the proton bound to the C atom on which, according to calculation, the maximum negative charge is concentrated.     

Tetraplatinum Cluster Complexes

The tetranuclear platinum cluster complexes [Pt₄(-CO)₃(-dppm)₃(PPh₃)]²⁺ and [Pt₄(-H)(-CO)₂(-dppm)₃(PPh₃)]⁺ have been prepared by cluster expansion. They have butterfly structures and are fluxional.     

Determination of traces of iron and gallium in high-purity aluminium

Summary A procedure is described suitable for determining iron and gallium down to the levels present in 99.999% pure aluminium. Copper, cobalt, manganese, and lanthanum do not interfere. A single determination takes about two hours.The precision of the method is within 0.1g iron at the 2-g iron level and within 0.4g of gallium at the 2-g gallium level per gram of metal.

---

Zusammenfassung Ein Verfahren zur Bestimmung von Bisen und Gallium in 99,999%igem Aluminium wird beschrieben. Kupfer, Kobalt, Mangan und Lanthan stören nicht. Eine Einzelbestimmung dauert ungefähr 2 Stunden. Die Genauigkeit des Verfahrens beträgt 0,1g Fe und 0,4g Ga bei Anwesenheit von 2g des betreffenden Elementes pro Gramm Metall.

---

Résumé On décrit un procédé permettant le dosage du fer et du gallium jusqu'aux teneurs présentes dans l'aluminium pur à 99,999%. Le cuivre, le cobalt, le manganèse et le lanthane n'interfèrent pas. Un seul dosage demande environ 2 heures.La précision de la méthode est de 0,1g de fer pour 2g de fer présent et de 0,4g de gallium pour 2g de gallium présent par gramme de métal.

     

Reaction of the Hexa-1,3,5-triyne Me3SiC≡CC≡CC≡CSiMe3 with Ru4(CO)13(μ 3-PPh): Parallels with the Chemistry of Alkynes and Diynes

Reaction of Ru₄(CO)₁₃(₃-PPh) (1) with the 1,3,5-hexatriyne Me₃SiCCCCC CSiMe₃ under mild thermal conditions affords initially Ru₄(CO)₁₀(-CO)₂{₄-¹,¹,²-P(Ph)C(CCSiMe₃)C(CCSiMe₃) (2), via the facile formation of a P–C bond in a manner similar to that demonstrated previously with alkynes and diynes. The 62-CVE cluster 2 readily decarbonylates to give crystallographically characterised Ru₄(CO)₁₀(-CO)(₄-PPh){₄-¹,¹,²,²-Me₃SiCCC₂CCSiMe₃} (3). Attempts to further incorporate the pendant alkyne moieties in 3 into the Ru₄ coordination environment were partially successful with Ru₄(CO)₁₀(₄-PPh)(₄-¹,¹,³,³-RC₄R') (4, R/R'=SiMe₃/CCSiMe₃) being formed as a minor product together with the unusual toluene coordinated species Ru₄(CO)₇(⁶-C₆H₅Me)(₄-PPh)(₄-¹,¹,³,³-Me₃SiC₄CCSiMe₄) (5). Cluster 3 reacts with an excess of Me₃SiCCCCCCSiMe₃ to give the open chain cluster Ru₄(CO)₉(₃-PPh){₄-²,²,⁴,⁴,-C₄(CCSiMe₃)(SiMe₃)C₄(CCSiMe₃)₃} (6).