Evaluation and Optimization of Organic Acid Pretreatment of Cotton Gin Waste for Enzymatic Hydrolysis and Bioethanol Production

This paper investigates the efficiency of the organic acids on the pretreatment of an industrially generated cotton gin waste for the removal of lignin, thereby releasing cellulose and hemicellulose as fermentable sugar components. Cotton gin waste was pretreated with various organic acids namely lactic acid, oxalic acid, citric acid, and maleic acid. Among these, maleic acid was found to be the most efficient producing maximum xylose sugar (126.05?±?0.74 g/g) at the optimum pretreatment condition of 150 °C, 500 mM, and 45 min. The pretreatment efficiency was comparable to the conventional dilute sulfuric acid pretreatment. A lignin removal of 88% was achieved by treating maleic acid pretreated biomass in a mixture of sodium sulfite and sodium chlorite. The pretreated biomass was further evaluated for the release of sugar by enzymatic hydrolysis and subsequently bioethanol production from hydrolysates. The maximum 686.13 g/g saccharification yield was achieved with maleic acid pretreated biomass which was slightly higher than the sulfuric acid (675.26 g/g) pretreated waste. The fermentation of mixed hydrolysates(41.75 g/l) produced 18.74 g/l bioethanol concentration with 2.25 g/l/h ethanol productivity and 0.48 g/g ethanol yield using sequential use of Saccharomyces cerevisiae and Pichia stipitis yeast strains. The production of bioethanol was higher than the ethanol produced using co-culture in comparison to sequential culture. Thus, it has been demonstrated that the maleic acid pretreatment and fermentation using sequential use of yeast strains are efficient for bioethanol production from cotton gin waste.     

The Influence of Different Strategies for the Saccharification of the Banana Plant Pseudostem and the Detoxification of Concentrated Broth on Bioethanol Production

Pseudostem of the Musa cavendishii banana plant was submitted to chemical pretreatments with acid (H₂SO₄ 2%, 120 °C, 15 min) and with alkali (NaOH 3%, 120 °C, 15 min), saccharified by commercial enzymes Novozymes® (Cellic CTec2 and HTec2). The influences of the pretreatments on the degradation of the lignin, cellulose and hemicellulose, porosity of the surface, particle crystallinity, and yield in reducing sugars after saccharification (Y _RS), were established. Different concentrations of biomass (70 and 100 g/L in dry matter (dm)), with different physical differences (dry granulated, crushed wet bagasse, and whole pseudostem), were used. The broth with the highest Y _RS among the different strategies tested was evaporated until the concentration of reducing sugars (RS) was to the order of 100 g/L and fermented, with and without prior detoxification with active carbon. Fermentation was carried out in Erlenmeyer flasks, at 30 °C, initial pH 5.0, and 120 rpm. In comparison to the biomass without chemical pretreatment and to the biomass pretreated with NaOH, the acid pretreatment of 70 g/L of dry granulated biomass enabled greater digestion of hemicellulose, lower index of cellulose crystallinity, and higher Y _RS (45.8 ± 0.7%). The RS increase in fermentation broth to 100 g/L, with posterior detoxification, presented higher productivity ethanol (Q _P = 1.44 ± 0.02 g/L/h) with ethanol yield (Y _P/RS) of 0.41 ± 0.02 g/g. The value of Q _P was to the order of 75% higher than Q _P obtained with the same broth without prior detoxification.     

Bioethanol Production from Soybean Residue via Separate Hydrolysis and Fermentation

Bioethanol was produced using polysaccharide from soybean residue as biomass by separate hydrolysis and fermentation (SHF). This study focused on pretreatment, enzyme saccharification, and fermentation. Pretreatment to obtain monosaccharide was carried out with 20% (w/v) soybean residue slurry and 270 mmol/L H₂SO₄ at 121 °C for 60 min. More monosaccharide was obtained from enzymatic hydrolysis with a 16 U/mL mixture of commercial enzymes C-Tec 2 and Viscozyme L at 45 °C for 48 h. Ethanol fermentation with 20% (w/v) soybean residue hydrolysate was performed using wild-type and Saccharomyces cerevisiae KCCM 1129 adapted to high concentrations of galactose, using a flask and 5-L fermenter. When the wild type of S. cerevisiae was used, an ethanol production of 20.8 g/L with an ethanol yield of 0.31 g/g consumed glucose was obtained. Ethanol productions of 33.9 and 31.6 g/L with ethanol yield of 0.49 g/g consumed glucose and 0.47 g/g consumed glucose were obtained in a flask and a 5-L fermenter, respectively, using S. cerevisiae adapted to a high concentration of galactose. Therefore, adapted S. cerevisiae to galactose could enhance the overall ethanol fermentation yields compared to the wild-type one.     

Enzymatic Pretreatment Coupled with the Addition of <Emphasis Type="Italic">p</Emphasis>-Hydroxyanisole Increased Levulinic Acid Production from Steam-Exploded Rice Straw Short Fiber

Levulinic acid production, directly from lignocellulosic biomass, resulted in low yields due to the poor substrate accessibility and occurrence of side reactions. The effects of reaction conditions, enzymatic pretreatment, and inhibitor addition on the conversion of steam-exploded rice straw (SERS) short fiber to levulinic acid catalyzed by solid superacid were investigated systematically. The results indicated that the optimal reaction conditions were temperature, time, and solid superacid concentration combinations of 200 °C, 15 min, and 7.5 %. Enzymatic pretreatment improved the substrate accessibility to solid superacid catalyst, and p-hydroxyanisole inhibitor reduced the side reactions during reaction processes, which helped to increase levulinic acid yield. The levulinic acid yield reached 25.2 % under the optimal conditions, which was 61.5 % higher than that without enzymatic pretreatment and inhibitor addition. Therefore, enzymatic pretreatment coupled with the addition of p-hydroxyanisole increased levulinic acid production effectively, which contributed to the value-added utilization of lignocellulosic biomass.     

Bioethanol Production from Ipomoea Carnea Biomass Using a Potential Hybrid Yeast Strain

The paper deals with the exploitation of Ipomoea carnea as a feedstock for the production of bioethanol. Dilute acid pretreatment under optimum conditions (3 %H₂SO₄, 120 °C for 45 min) produced 17.68 g L^?1 sugars along with 1.02 g L^?1 phenolics and 1.13 g L^?1 furans. A combination of overliming and activated charcoal adsorption facilitated the removal of 91.9 % furans and 94.7 % phenolics from acid hydrolysate. The pretreated biomass was further treated with a mixture of sodium sulphite and sodium chlorite and, a maximum lignin removal of 81.6 % was achieved. The enzymatic saccharification of delignified biomass resulted in 79.4 % saccharification with a corresponding sugar yield of 753.21 mg g^?1. Equal volume of enzymatic hydrolysate and acid hydrolysate were mixed and used for fermentation with a hybrid yeast strain RPRT90. Fermentation of mixed detoxified hydrolysate at 30 °C for 28 h produced ethanol with a yield of 0.461 g g^?1. A comparable ethanol yield (0.414 g g^?1) was achieved using a mixture of enzymatic hydrolysate and undetoxified acid hydrolysate. Thus, I. carnea biomass has been demonstrated to be a potential feedstock for bioethanol production, and the use of hybrid yeast may pave the way to produce bioethanol from this biomass.     

Combined De-Algination Process as a Fractionation Strategy for Valorization of Brown Macroalga <Emphasis Type="Italic">Saccharina japonica</Emphasis>

A combined process, de-algination followed by enzymatic saccharification, was designed to produce alginate and glucose from Saccharina japonica consecutively. The process conditions of de-algination were optimized separately for each stage of acidification and alkaline extraction. Collectively, the de-algination yield was 70.1% under the following optimized conditions: 2.4 wt% of Na₂CO₃, 70 °C, and 100 min with the acidified S. japonica immersed in a 0.5 wt% H₂SO₄ solution for 2 h at room temperature. The glucan content in the de-alginated S. japonica increased to 38.0%, which was approximately fivefold higher than that of the raw S. japonica. The enzymatic hydrolysis of the de-alginated S. japonica almost completed in 9 h, affording 5.2 g (96.8% of glucan digestibility) of glucose at a de-alginated S. japonica loading of 14.2 g.     

Release of Polyphenols Is the Major Factor Influencing the Bioconversion of Rice Straw to Lactic Acid

In this study, we found that p-coumaric acid (p-CA), ferulic acid (FA), and condensed tannins were released from rice straw during saccharification. The presence of polyphenols prolonged the lag phase and lowered the productivity of lactic acid. p-CA was identified as a key inhibitor. Tannins had a lower inhibitory effect than p-CA; FA had little inhibitory effect. Acid, alkaline, and ball milling pretreatments elicited different levels of polyphenol release from rice straw. Due to the different levels of polyphenol release in the pretreatment step, the enzymatic hydrolysates contained different concentrations of polyphenols. Compared with fermentation with a synthetic medium, fermentation with the hydrolysates of ball-milled rice straw provided much lower productivity and yield of lactic acid due to the presence of polyphenols. Removal of these compounds played an important role in lactic acid fermentation. When rice straw was alkaline pretreated, the hydrolysates contained few phenolic compounds, resulting in high productivity and yield of lactic acid (1.8 g/L/h and 26.7 g/100 g straw), which were comparable to those in a synthetic medium. This indicates that there is a correlation between removal of phenolic compounds and efficiency in lactic acid fermentation.     

Sequential Aqueous Ammonia Extraction and LiCl/<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethyl Formamide Pretreatment for Enhancing Enzymatic Saccharification of Winter Bamboo Shoot Shell

Effective utilization of winter bamboo shoot shell (BSS) is of great interest, since BSS provides a renewable and inexpensive bioresource for the production of biofuels. In this study, an effective combination pretreatment by the sequential aqueous ammonia (25 wt%) extraction at 50 °C for 24 h and LiCl/N,N-dimethyl formamide (LiCl/DMF) (6 wt% of LiCl) pretreatment at 50 °C for 8 h was used for pretreating BSS. SEM, FTIR, and XRD results indicated that combination pretreatment could effectively remove lignin and change the crystal structure of cellulose for promoting enzymatic saccharification. Additionally, significant linear correlations were found about solid recovery-delignification (R ² = 0.9235), delignification-reducing sugars (R ² = 0.9552), and delignification-hemicellulose removal (R ² = 0.9779) during the combination pretreatment. The reducing sugars and glucose from the hydrolysis of 100 g/L pretreated BSS could be obtained at 72.3 and 40.5 g/L, respectively. Using the recovered BSS-hydrolysates containing 20–50 g/L glucose as carbon source, the ethanol yields at 48 h could be obtained at 84.5–86.1% of the theoretical yield. In conclusion, the sequential ammonia extraction and LiCl/DMF pretreatment has high potential application in future.     

Single Cell Oil Production from Hydrolysates of Inulin by a Newly Isolated Yeast <Emphasis Type="Italic">Papiliotrema laurentii</Emphasis> AM113 for Biodiesel Making

Microbial oils are among the most attractive alternative feedstocks for biodiesel production. In this study, a newly isolated yeast strain, AM113 of Papiliotrema laurentii, was identified as a potential lipid producer, which could accumulate a large amount of intracellular lipids from hydrolysates of inulin. P. laurentii AM113 was able to produce 54.6% (w/w) of intracellular oil in its cells and 18.2 g/l of dry cell mass in a fed-batch fermentation. The yields of lipid and biomass were 0.14 and 0.25 g per gram of consumed sugar, respectively. The lipid productivity was 0.092 g of oil per hour. Compositions of the fatty acids produced were C_14:0 (0.9%), C_16:0 (10.8%), C_16:1 (9.7%), C_18:0 (6.5%), C_18:1 (60.3%), and C_18:2 (11.8%). Biodiesel obtained from the extracted lipids could be burnt well. This study not only provides a promising candidate for single cell oil production, but will also probably facilitate more efficient biodiesel production.     

Ethanol production from steam-explosion pretreated wheat straw

Bioconversion of cereal straw to bioethanol is becoming an attractive alternative to conventional fuel ethanol production from grains. In this work, the best operational conditions for steam-explosion pretreatment of wheat straw for ethanol production by a simultaneous saccharification and fermentation process were studied, using diluted acid [H₂SO₄ 0.9% (w/w)] and water as preimpregnation agents. Acid-or water-impregnated biomass was steam-exploded at different temperatures (160–200°C) and residence times (5, 10, and 20 min). Composition of solid and filtrate obtained after pretreatment, enzymatic digestibility and ethanol production of pretreated wheat straw at different experimental conditions was analyzed. The best pretreatment conditions to obtain high conversion yield to ethanol (approx 80% of theoretical) of cellulose-rich residue after steam-explosion were 190°C and 10 min or 200°C and 5 min, in acid-impregnated straw. However, 180°C for 10 min in acid-impregnated biomass provided the highest ethanol yield referred to raw material (140 L/t wheat straw), and sugars recovery yield in the filtrate (300 g/kg wheat straw).     

Enhancement of Enzymatic Hydrolysis and Klason Lignin Removal of Corn Stover Using Photocatalyst-Assisted Ammonia Pretreatment

Photocatalyst-assisted ammonia pretreatment was explored to improve lignin removal of the lignocellulosic biomass for effective sugar conversion. Corn stover was treated with 5.0–12.5 wt.% ammonium hydroxide, two different photocatalysts (TiO₂ and ZnO) in the presence of molecular oxygen in a batch reactor at 60 °C. Various solid-to-liquid ratios (1:20–1:50) were also tested. Ammonia pretreatment assisted by TiO₂-catalyzed photo-degradation removed 70 % of Klason lignin under the optimum condition (12.5 % ammonium hydroxide, 60 °C, 24 h, solid/liquid?=?1:20, photocatalyst/biomass?=?1:10 with oxygen atmosphere). The enzymatic digestibilities of pretreated corn stover were 85 % for glucan and 75 % for xylan with NH₃-TiO₂-treated solid and 82 % for glucan and 77 % for xylan with NH₃-ZnO-treated solid with 15 filter paper units/g-glucan of cellulase and 30 cellobiase units/g-glucan of β-glucosidase, a 2–13 % improvement over ammonia pretreatment alone.     

Characterization of a novel <Emphasis Type="Italic">Aspergillus niger</Emphasis> beta-glucosidase tolerant to saccharification of lignocellulosic biomass products and fermentation inhibitors

Properties of beta-glucosidase produced by Aspergillus niger URM 6642 recently isolated from the Atlantic rainforest biome and its potential tolerance to saccharification of lignocellulosic biomass products and fermentation inhibitors was evaluated. The fungus was cultivated under solid state culture conditions at 37°C with different agro-industrial wastes. High levels of beta-glucosidase (3778.9 U g^?1)from A. niger were obtained with rice meal as substrate under solid state culture conditions after ten days. Optimum pH for this particular beta-glucosidase activity was 4.0 although it was stable in the range of 4.0 to 7.0. The half-life (T_½) of beta-glucosidase at 55°C is 3 h. However, at the optimum temperature of the enzyme, 65°C, T_½ is 20 min. The enzyme showed tolerance to various compounds such as glucose, xylose, 5-hydroxymethyl furfural, furfural, coumarin, ethanol and acetic acid. Therefore, beta-glucosidase from the novel A. niger species may be of potential use in the saccharification of lignocellulosic biomass, as well as an additional enzyme supplement in cellulase cocktails used to increase the yield of fermentable sugars.     

Kinetic Study on the Pretreatment and Enzymatic Saccharification of Rice Hull for the Production of Fermentable Sugars

The production of fermentable sugars from rice hull was studied by dilute acid pretreatment and enzymatic saccharification. Rice hull (15%, w/v) was pretreated by 1% (v/v) sulfuric acid at high temperature (120∼160 °C) for 15, 30, 45, and 60 min, respectively. The maximum sugar concentration from rice hull in the prehydrolysate was obtained at 140 °C for 30 min, but the enzymatic saccharification yield from the corresponding pretreated rice hull is not high. To another aspect, the maximum enzymatic saccharification yield was achieved at 160 °C for 60 min, while the recovery of fermentable sugars was the poorest. To take account of fermentable sugars from pretreatment and enzymatic saccharification, the maximum yield of sugars was obtained only when rice hull was treated at 140 °C for 30 min. Under this condition, 72.5% (w/w) of all sugars generated from the raw material can be recovered. The kinetic study on the enzymatic saccharification of dilute acid pretreated rice hull was also performed in this work by a modified Michaelis–Menten model and a diffusion-limited model. After calculation by a linear and a non-linear regression analysis, both models showed good relation with the experimental results.     

Acetone–Butanol–Ethanol Production from Waste Seaweed Collected from Gwangalli Beach,Busan, Korea,Based on pH-Controlled and Sequential Fermentation Using Two Strains

The optimal conditions for acetone–butanol–ethanol (ABE) production were evaluated using waste seaweed from Gwangalli Beach, Busan, Korea. The waste seaweed had a fiber and carbohydrate, content of 48.34%; these are the main resources for ABE production. The optimal conditions for obtaining monosaccharides based on hyper thermal (HT) acid hydrolysis of waste seaweed were slurry contents of 8%, sulfuric acid concentration of 138 mM, and treatment time of 10 min. Enzymatic saccharification was performed using 16 unit/mL Viscozyme L, which showed the highest affinity (K_m?=?1.81 g/L). After pretreatment, 34.0 g/L monosaccharides were obtained. ABE fermentation was performed with single and sequential fermentation of Clostridium acetobutylicum and Clostridium tyrobutyricum; this was controlled for pH. A maximum ABE concentration of 12.5 g/L with Y_ABE 0.37 was achieved using sequential fermentation with C. tyrobutyricum and C. acetobutylicum. Efficient ABE production from waste seaweed performed using pH-controlled culture broth and sequential cell culture.     

Bioethanol Production Using Waste Seaweed Obtained from Gwangalli Beach,Busan, Korea by Co-culture of Yeasts with Adaptive Evolution

Conditions for ethanol production were evaluated using waste seaweed obtained from Gwangalli beach, Busan, Korea, after strong winds on January 15, 2015. Eleven types of seaweed were identified, and the proportions of red, brown, and green seaweed wastes were 26, 46, and 28%, respectively. Optimal pretreatment conditions were determined as 8% slurry content, 286 mM H₂SO₄ for 90 min at 121 °C. Enzymatic saccharification with 16 units/mL Celluclast 1.5L and Viscozyme L mixture at 45 °C for 48 h was carried out as optimal condition. A maximum monosaccharide concentration of 30.2 g/L was obtained and used to produce ethanol. Fermentation was performed with single or mixed yeasts of non-adapted and adapted Saccharomyces cerevisiae KCTC 1126 and Pichia angophorae KCTC 17574 to galactose and mannitol, respectively. The maximum ethanol concentration and yield of 13.5 g/L and Y_EtOH of 0.45 were obtained using co-culture of adapted S. cerevisiae and P. angophorae.     

Hybrid SSF/SHF Processing of SO<Subscript>2</Subscript> Pretreated Wheat Straw—Tuning Co-fermentation by Yeast Inoculum Size and Hydrolysis Time

Wheat straw is one of the main agricultural residues of interest for bioethanol production. This work examines conversion of steam-pretreated wheat straw (using SO₂ as a catalyst) in a hybrid process consisting of a short enzymatic prehydrolysis step and a subsequent simultaneous saccharification and fermentation (SSF) step with a xylose-fermenting strain of Saccharomyces cerevisiae. A successful process requires a balanced design of reaction time and temperature in the prehydrolysis step and yeast inoculum size and temperature in the SSF step. The pretreated material obtained after steam pretreatment at 210 °C for 5 min using 2.5 % SO₂ (based on moisture content) showed a very good enzymatic digestibility at 45 °C but clearly lower at 30 °C. Furthermore, the pretreatment liquid was found to be rather inhibitory to the yeast, partly due to a furfural content of more than 3 g/L. The effect of varying the yeast inoculum size in this medium was assessed, and at a yeast inoculum size of 4 g/L, a complete conversion of glucose and a 90 % conversion of xylose were obtained within 50 h. An ethanol yield (based on the glucan and xylan in the pretreated material) of 0.39 g/g was achieved for a process with this yeast inoculum size in a hybrid process (10 % water-insoluble solid (WIS)) with 4 h prehydrolysis time and a total process time of 96 h. The obtained xylose conversion was 95 %. A longer prehydrolysis time or a lower yeast inoculum size resulted in incomplete xylose conversion.     

Optimization of High Solids Dilute Acid Hydrolysis of Spent Coffee Ground at Mild Temperature for Enzymatic Saccharification and Microbial Oil Fermentation

Soluble coffee, being one of the world’s most popular consuming drinks, produces a considerable amount of spent coffee ground (SCG) along with its production. The SCG could function as a potential lignocellulosic feedstock for production of bioproducts. The objective of this study is to investigate the possible optimal condition of dilute acid hydrolysis (DAH) at high solids and mild temperature condition to release the reducing sugars from SCG. The optimal condition was found to be 5.3 % (w/w) sulfuric acid concentration and 118 min reaction time. Under the optimal condition, the mean yield of reducing sugars from enzymatic saccharification of defatted SCG acid hydrolysate was 563 mg/g. The SCG hydrolysate was then successfully applied to culture Lipomyces starkeyi for microbial oil fermentation without showing any inhibition. The results suggested that dilute acid hydrolysis followed by enzymatic saccharification has the great potential to convert SCG carbohydrates to reducing sugars. This study is useful for the further developing of biorefinery using SCG as feedstock at a large scale.     

Variations in Physicochemical Properties and Bioconversion Efficiency of <Emphasis Type="Italic">Ulva lactuca</Emphasis> Polysaccharides After Different Biomass Pretreatment Techniques

Green macroalgae are an abundant and undervalued biomass with a specific cell wall structure. In this context, different pretreatments, namely ethanol organosolv (Org), alkaline, liquid hot water (LHW), and ionic liquid (IL) pretreatments, were applied to the green macroalgae Ulva lactuca biomass and then evaluated. Their effects on chemical composition, biomass crystallinity, enzymatic digestibility, and theoretical ethanol potential were studied. The chemical composition analysis showed that the Org and LHW pretreatments allowed the highest glucan recovery (80.8 ± 3.6 and 62.9 ± 4.4 g/100 g DM, respectively) with ulvan (80.0 and 99.1%) and hemicellulose (55.0 and 42.3%) removal. These findings were in agreement with both thermogravimetric analysis and scanning electron microscopy results that confirm significant structural changes of the pretreated biomasses. It was found that the employed pretreatments did not significantly affect the cellulose crystallinity; however, they both increased the whole crystallinity and the enzymatic digestibility. This later reached 97.5% in the case of LHW pretreatment. Our results showed high efficiency saccharification of Ulva lactuca biomass that will constitute the key step of the implementation of a biorefinery process.     

Pretreatment and enzymatic saccharification of corn fiber

Corn fiber consists of about 20% starch, 14% cellulose, and 35% hemicellulose, and has the potential to serve as a low-cost feedstock for production of fuel ethanol. Several pretreatments (hot water, alkali, and dilute, acid) and enzymatic saccharification procedures were evaluated for the conversion of corn fiber starch, cellulose, and hemicellulose to monomeric sugars. Hot water pretreatment (121°C, 1 h) facilitated the enzymatic sacch arification of starch and cellulose but not hemicellulose. Hydrolysis of corn fiber pretreated with alkali un dersimilar conditions by enzymatic means gave similar results. Hemicellulose and starch components were converted to monomeric sugars by dilute H₂SO₄ pretreatment (0.5–1.0%, v/v) at 121°C. Based on these findings, a method for pretreatment and enzymatic saccharification of corn fiber is presented. It in volves the pretreatment of corn fiber (15% solid, w/v) with dilute acid (0.5% H₂SO₄, v/v) at 121°C for 1 h, neutralization to pH 5.0, then saccharification of the pretreated corn fiber material with commercial cellulase and β-glucosidase preparations The yield of monomeric sugars from corn fiber was typically 85–100% of the theoretical yield. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Cotton Stalk Pretreatment Using <Emphasis Type="Italic">Daedalea flavida</Emphasis>, <Emphasis Type="Italic">Phlebia radiata</Emphasis>, and <Emphasis Type="Italic">Flavodon flavus</Emphasis>: Lignin Degradation,Cellulose Recovery,and Enzymatic Saccharification

Lignocellulolytic enzyme activities of selective fungi Daedalea flavida MTCC 145 (DF-2), Phlebia radiata MTCC 2791 (PR), and non-selective fungus Flavodon flavus MTCC 168 (FF) were studied for pretreatment of cotton stalks. Simultaneous productions of high LiP and laccase activities by DF-2 during early phase of growth were effective for lignin degradation 27.83 ± 1.25 % (w/w of lignin) in 20-day pretreatment. Production of high MnP activity without laccase in the early growth phase of PR was ineffective and delayed lignin degradation 24.93 ± 1.53 % in 25 days due to laccase production at later phase. With no LiP activity, low activities of MnP and laccase by FF yielded poor lignin degradation 15.09 ± 0.6 % in 20 days. Xylanase was predominant cellulolytic enzyme produced by DF-2, resulting hemicellulose as main carbon and energy source with 83 % of cellulose recovery after 40 days of pretreatment. The glucose yield improved more than two fold from 20-day DF-2 pretreated cotton stalks after enzymatic saccharification.