Preparation of polyamide-6/chitosan composite nanofibers by a single solvent system via electrospinning for biomedical applications

This work was focused on preparation and characterizations of chitosan blended polyamide-6 nanofibers by a new single solvent system via electrospinning process for human osteoblastic (HOB) cell culture applications. The morphological, structural and thermal properties of the polyamide-6/chitosan nanofibers were analyzed by using field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Fourier transform-infrared (FT-IR) spectroscopy, Raman spectroscopy, differential scanning calorimetry (DSC) and thermogravimetry (TGA). SEM images revealed that the nanofibers were well-oriented and had good incorporation of chitosan. FT-IR results indicated that the amino groups of chitosan existed in the blended nanofibers. TGA analysis revealed that the onset degradation temperature was decreased with increasing chitosan content in the blended nanofibers. The morphological features of the cells attached on nanofibers were confirmed by SEM. The adhesion, viability and proliferation properties of osteoblast cells on the polyamide-6/chitosan blended nanofibers were analyzed by in vitro cell compatibility test.     

Highly porous core-shell polymeric fiber network

Core-shell nanofibers are of great interest in the field of tissue engineering and cell biology. We fabricated porous core-shell fiber networks using an electrospinning system with a water-immersed collector. We hypothesized that the phase separation and solvent evaporation process would enable the control of the pore formation on the core-shell fiber networks. To synthesize porous core-shell fiber networks, we used polycaprolactone (PCL) and gelatin. Quantitative analysis showed that the sizes of gelatin-PCL core-shell nanofibers increased with PCL concentrations. We also observed that the shapes of the pores created on the PCL fiber networks were elongated, whereas the gelatin-PCL core-shell fiber networks had circular pores. The surface areas of porous nanofibers were larger than those of the nonporous nanofibers due to the highly volatile solvent and phase separation process. The porous core-shell fiber network was also used as a matrix to culture various cell types, such as embryonic stem cells, breast cancer cells, and fibroblast cells. Therefore, this porous core-shell polymeric fiber network could be a potentially powerful tool for tissue engineering and biological applications.     

Exploring the dark side of MTT viability assay of cells cultured onto electrospun PLGA-based composite nanofibrous scaffolding materials

One major method used to evaluate the biocompatibility of porous tissue engineering scaffolding materials is MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. The MTT cell viability assay is based on the absorbance of the dissolved MTT formazan crystals formed in living cells, which is proportional to the number of viable cells. Due to the strong dye sorption capability of porous scaffolding materials, we propose that the cell viability determined from the MTT assay is likely to give a false negative result. In this study, we aim to explore the effect of the adsorption of MTT formazan on the accuracy of the viability assay of cells cultured onto porous electrospun poly(lactic-co-glycolic acid) (PLGA) nanofibers, HNTs (halloysite nanotubes)/PLGA, and CNTs (multiwalled carbon nanotubes)/PLGA composite nanofibrous mats. The morphology of electrospun nanofibers and L929 mouse fibroblasts cultured onto the nanofibrous scaffolds were observed using scanning electron microscopy. The viability of cells proliferated for 3 days was evaluated through the MTT assay. In the meantime, the adsorption of MTT formazan onto the same electrospun nanofibers was evaluated and the standard concentration-absorbance curve was obtained in order to quantify the contribution of the adsorbed MTT formazan during the MTT cell viability assay. We show that the PLGA, and the HNTs- or CNTs-doped PLGA nanofibers display appreciable MTT formazan dye sorption, corresponding to 35.6-50.2% deviation from the real cell viability assay data. The better dye sorption capability of the nanofibers leads to further deviation from the real cell viability. Our study gives a general insight into accurate MTT cytotoxicity assessment of various porous tissue engineering scaffolding materials, and may be applicable to other colorimetric assays for analyzing the biological properties of porous scaffolding materials.     

Fluorescent PMMA/MEH‐PPV electrospun nanofibers: Investigation of morphology,solvent, and surfactant effect

Electrospinning is a powerful technique to produce nanofibers of tunable diameter and morphology for medicine and biotechnological applications. By doping electrospun nanofibers with inorganic and organic compounds, new functionalities can be provided for technological applications. Herein, we report a study on the morphology and optical properties of electrospun nanofibers based on the conjugated polymer poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV) and poly(methylmethacrylate) (PMMA). Initially, we investigate the influence of the solvent, surfactant, and the polymer concentration on electrospinning of PMMA. After determining the best conditions, 0.1% MEH‐PPV was added to obtain fluorescent nanofibers. The optical characterizations display the successful impregnation of MEH‐PPV into the PMMA fibers without phase separation and the preservation of fluorescent property after fiber electrospinning. The obtained results show the ability of the electrospinning approach to obtain fluorescent PMMA/MEH‐PPV nanofibers with potential for optical devices applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1388–1394     

Electrospun poly(aniline‐co‐ethyl 3‐aminobenzoate)/poly(lactic acid) nanofibers and their potential in biomedical applications

Poly(aniline‐co‐ethyl 3‐aminobenzoate) (3EABPANI) copolymer was blended with poly(lactic acid) (PLA) and co‐electrospun into nanofibers to investigate its potential in biomedical applications. The relationship between electrospinning parameters and fiber diameter has been investigated. The mechanical and electrical properties of electrospun 3EABPANI‐PLA nanofibers were also evaluated. To assess cell morphology and biocompatibility, nanofibrous mats of pure PLA and 3EABPANI‐PLA were deposited on glass substrates and the proliferation of COS‐1 fibroblast cells on the nanofibrous polymer surfaces determined. The nanofibrous 3EABPANI‐PLA blends were easily fabricated by electrospinning and gave enhanced mammalian cell growth, antioxidant and antimicrobial capabilities, and electrical conductivity. These results suggest that 3EABPANI‐PLA nanofibrous blends might provide a novel bioactive conductive material for biomedical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Electrospun non-woven nanofibrous hybrid mats based on chitosan and PLA for wound-dressing applications

Continuous defect-free nanofibers containing chitosan (Ch) or quaternized chitosan (QCh) were successfully prepared by one-step electrospinning of Ch or QCh solutions mixed with poly[(L-lactide)-co-(D,L-lactide)] in common solvent. XPS revealed the surface chemical composition of the bicomponent electrospun mats. Crosslinked Ch- and QCh-containing nanofibers exhibited higher kill rates against bacteria S. aureus and E. coli than the corresponding solvent-cast films. SEM observations showed that hybrid mats were very effective in suppressing the adhesion of pathogenic bacteria S. aureus. The hybrid nanofibers are promising for wound-healing applications.     

Electrospun nanofibers of poly（vinyl pyrrolidone）/Eu^3＋ and its photoluminescence properties

Nanofibers of poly（vinyl pyrrolidone） （PVP）/Eu^3＋ with diameters of 300-900 nm were prepared by using sol-gel processing and electrospinning technique. The products were characterized by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, and photoluminescence （PL）. The results indicated that, Eu^3＋ was successfully embedded in the onedimensional hybrid nanofibers, and the PVP/Eu^3＋ hybrid nanofibers had favorable photoluminescence properties.     

Electrospun poly(ethylene oxide)/chitosan nanofibers with cellulose nanocrystals as support for cell culture of 3T3 fibroblasts

Chitosan/poly(ethylene oxide) (PEO) (5:1) nanofibers with cellulose nanocrystals (CNCs) were produced using an electrospinning technique. The addition of CNCs to the chitosan/PEO solutions allowed the production of uniform fibers (without beads) with a high proportion of chitosan. The fiber diameters were influenced by the concentration of CNCs in the chitosan/PEO solutions. The solutions containing 10% (w/w) of CNCs produced thinner fibers compared to solutions containing 5% (w/w) of CNCs. Thermogravimetric analysis indicated that the nanofibers were thermally stable, despite the CNCs having an effect on the PEO decomposition. Results from the cell assay in cultures of 3T3 fibroblasts indicated that the chitosan/PEO nanofibers (with 10% CNCs) promoted cell attachment with changes in the cytoskeletal organization. The results obtained in this work highlight the favorable effect of CNCs in electrospinning of chitosan/PEO. As expected, the influence of nanofibers on 3T3 fibroblasts F-actin and β-tubulin network revealed alterations in cytoskeleton, leading to changes in cell morphology and spreading.     

Dual-syringe reactive electrospinning of cross-linked hyaluronic acid hydrogel nanofibers for tissue engineering applications

A facile fabrication of a cross-linked hyaluronic acid (HA) hydrogel nanofibers by a reactive electrospinning method is described. A thiolated HA derivative, 3,3'-dithiobis(propanoic dihydrazide)-modified HA (HA-DTPH), and poly(ethylene glycol) diacrylate (PEGDA) are selected as the cross-linking system. The cross-linking reaction occurs simultaneously during the electrospinning process using a dual-syringe mixing technique. Poly(ethylene oxide) (PEO) is added into the spinning solution as a viscosity modifier to facilitate the fiber formation and is selectively removed with water after the electrospinning process. The nanofibrous structure of the electrospun HA scaffold is well preserved after hydration with an average fiber diameter of 110 nm. A cell morphology study on fibronectin (FN)-adsorbed HA nanofibrous scaffolds shows that the NIH 3T3 fibroblasts migrate into the scaffold through the nanofibrous network, and demonstrate an elaborate three-dimensional dendritic morphology within the scaffold, which reflects the dimensions of the electrospun HA nanofibers. These results suggest the application of electrospun HA nanofibrous scaffolds as a potential material for wound healing and tissue regeneration. [image: see text] Laser scanning confocal microscopy demonstrates that the NIH3T3 fibroblast develops an extended 3D dendritic morphology within the fibronectin-adsorbed electrospun HA nanofibrous scaffold.     

Influence of solvents on the formation of ultrathin uniform poly(vinyl pyrrolidone) nanofibers with electrospinning

Although there have been many reports on the preparation and applications of various polymer nanofibers with the electrospinning technique, the understanding of synthetic parameters in electrospinning remains limited. In this article, we investigate experimentally the influence of solvents on the morphology of the poly(vinyl pyrrolidone) (PVP) micro/nanofibers prepared by electrospinning PVP solution in different solvents, including ethanol, dichloromethane (MC) and N,N‐dimethylformamide (DMF). Using 4 wt % PVP solutions, the PVP fibers prepared from MC and DMF solvents had a shape like a bead‐on‐a‐string. In contrast, smooth PVP nanofibers were obtained with ethanol as a solvent although the size distribution of the fibers was somewhat broadened. In an effort to prepare PVP nanofibers with small diameters and narrow size distributions, we developed a strategy of using mixed solvents. The experimental results showed that when the ratio of DMF to ethanol was 50:50 (w/w), regular cylindrical PVP nanofibers with a diameter of 20 nm were successfully prepared. The formation of these thinnest nanofibers could be attributed to the combined effects of ethanol and DMF solvents that optimize the solution viscosity and charge density of the polymer jet. In addition, an interesting helical‐shaped fiber was obtained from 20 wt % PVP solution in a 50:50 (w/w) mixed ethanol/DMF solvent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3721–3726, 2004     

Resorbable scaffolds from three different techniques: electrospun fabrics, salt-leaching porous films, and smooth flat surfaces

Nanofibrous scaffolds of poly[(L-lactide)-co-(1,5-dioxepan-2-one)] generated by electrospinning have been compared with porous films obtained by solvent cast/salt leaching and homogeneous films. A comparison between the fibrous materials and the homogeneous solvent-cast films revealed that the surface of the nanofibers was more hydrophobic and that the nanofibers were degraded more rapidly in the presence of proteinase. It was obvious that the strain-to-break was reduced by the nanofiber formation, it decreased from 370% to 130% independent of fiber diameter. These values were however considerably higher than the strain-to-break of the solvent-cast/salt leaching scaffold. In addition, the nanofibrous material accelerated the adhesion and growth of the mesenchymal stem cell compared to the smooth material.     

Optimization and characterization of electrospun chitosan/poly(vinyl alcohol) nanofibers as a phenol adsorbent via response surface methodology

Fabrication and characterization of chitosan/poly(vinyl alcohol) electrospun nanofibers for adsorption of phenol from water were investigated. The effects of voltage (15–30 kV), solution injection flow rate (0.5–1.5 ml/hr), distance of needle and collector (10–20 cm) and chitosan/poly(vinyl alcohol) ratio (25/75, 50/50, 75/25) were studied to obtain the optimum electrospinning conditions for the maximum adsorption capacity of phenol. Central composite design (CCD) was used to investigate and optimize the processing factors for production of chitosan/poly(vinyl alcohol) nanofibers from aqueous solutions. The nanofibers were characterized using scanning electron microscopy and Fourier transform infrared spectroscopy (FTIR). Uniform beadless nanofibers with the minimum diameters of 3–11 nm were obtained at chitosan/poly(vinyl alcohol) ratio of 50/50, voltage of 22.5 kV, distance of 15 cm and injection flow rate of 1.99 ml hr^?1. Fourier transform infrared spectrum of chitosan/poly(vinyl alcohol) exhibited the existence of relevant functional groups of both poly(vinyl alcohol) and chitosan in the blends. Results of CCD show that among all processing factors, rate of electrospinning will highly affect the nanofiber adsorption. The response surface quadratic order model presented correlation coefficient explaining 69.5% of the variability in the adsorption. Copyright © 2017 John Wiley & Sons, Ltd.     

Preparation and Drug Release of PVA Composite Nanofibers Loaded Chitosan Microsphere

In this paper, we reported the fabrication of poly(vinyl alcohol)-chitosan (PVA-CS) microspheres composite nanofibers by electrospinning technique. The chitosan microspheres were firstly prepared by electrospray with the solution of chitosan and combretastatin A4. The morphology and size distribution of chitosan microspheres were analyzed by scanning electron microscopy. The influencing factors including the concentrations of both PVA and CS microspheres were studied. The physical properties of the composite nanofibers were characterized by X-ray diffraction (XRD). The drug release rate, MTT toxicity test, and cell culture were also investigated in detail. Results indicate that the chitosan microsphere-loaded composite nanofibers can be prepared when the PVA concentration is 120 mg/mL. The continuity of the nanofibers was influenced by the concentration of CS microspheres. The characteristic peaks of CS or PVA were not observed in the diffractograms after the CS and PVA were processed using the high-voltage electrostatic technique. In addition, the drug release rate showed that nanofibers induce an obvious slow-release effect. Composite nanofibers were non-toxic to fibroblasts cells, and the fibroblasts cells could proliferate on the nanofiber mat.     

Characterization of gelatin nanofibers electrospun using ethanol/formic acid/water as a solvent

Gelatin nanofibers were prepared via electrospinning using aqueous solutions of formic acid and ethanol as the solvent instead of cytotoxic solvents. The resulting mat was further crosslinked with glutaraldehyde (GTA). The influence of the storing time on the viscosity and gel point of the solution was investigated. The gelatin nanofibers were examined using a field emission scanning electron microscope (FESEM) for the fiber size and morphology. The lowest diameter of gelatin fiber (85 nm, without beads) was achieved when the gelatin concentration was 20 wt% and electrospinning was conducted with a voltage of 20 kV over a distance of 10 cm at ambient temperature. The results from differential scanning calorimetry (DSC) showed that the softening temperature of gelatin nanofibers crosslinked with GTA was elevated. In addition, GTA‐crosslinked gelatin nanofibers exhibited cell compatibility for mouse mesangial cells (CRL 1927). Copyright © 2008 John Wiley & Sons, Ltd.     

Controlled Nanofiber Composed of Multi‐Wall Carbon Nanotube/Poly(Ethylene Oxide)

We have successfully fabricated poly(ethylene oxide) (PEO) nanofibers containing embedded multi‐wall carbon nanotubes (MWCNTs). An initial dispersion of the MWCNTs in distilled water was achieved using sodium dodecyl sulfate. Subsequently, the dispersion was decanted into a PEO solution, which enabled separation of the MWCNTs and their individual incorporation into the PEO nanofibers on subsequent electrospinning. Initially, the carbon nanotube (CNT) rods were randomly oriented, but owing to the sink‐like flow in the electrospinning wedge, they became gradually oriented along the streaming direction, in order that oriented CNTs were obtained on entering the electrospun jet. Individual MWCNTs became embedded in the nanofibers, and were mostly aligned along the fiber axis. Evidence of load transfer to the nanotubes in the composite nanofiber was observed from the field‐emission scanning electron microscopy, transmission electron microscopy and conductivity data.     

Interface hydrogen-bonded core-shell nanofibers by coaxial electrospinning

Core-shell nanofibers were prepared by coaxial electrospinning technology,with poly(ethylene oxide) (PEO) as the core while poly(acrylic acid) (PAA) as the shell.PEO and PAA can form polymer complexes based on hydrogen bonding.In order to avoid forming strong hydrogen bonding complexes at nozzle and blocking spinning process,a polar aprotic solvent,N,N-dimethylformamide (DMF),was selected to dissolve PEO and PAA respectively.SEM,TEM and DSC were utilized to characterize the morphology and structure of PEO-PAA core-shell nanofibers.FTIR spectra demonstrated that hydrogen bonding was formed at the core-shell interface.In addition,the PAA shell of the nanofibers can be cross-linked by ethylene glycol (EG) under heat treatment,which increases the stability and extends the potential applications in aqueous environment.     

Polysulfone nanofibers prepared by electrospinning and gas/jet-electrospinning

Polysulfone nanofibers were prepared by electrospinning. The electrospinning equipment was designed in a new way, wherein the spinneret was combined with a gas jet device. The intrinsic viscosity of the used polysulfone was 0.197 dL/g in dimethyl acetamide, which was also the solvent in electrospinning. The gas used in this gas jet/electrostatic spinning was nitrogen. The relationship between the process parameters and the average diameter of polysulfone nanofibers was investigated. The main process parameters studied in this work were the voltage, the flow rate of the spinning fluid, the distance between the spinneret and the nanofiber collector and the temperature in the spinning chamber. The other important factors determining the nanometer diameter were the spinning fluid properties including its viscosity, surface tension and electrical conductivity. The average diameter and the diameter distribution of electrospinning nanofibers were measured experimentally by using scanning electron microscopy. The diameter of polysulfone nanofibers prepared by the gas jet/electrostatic spinning was in the range 50–500 nm. It was found that the diameter of nanofibers mainly depended on high voltage, the gap between the spinneret and the collector and the concentration of polymer solutions. It is concluded that the gas-jet/electrospinning is a better method than the conventional electrospinning, in that it makes the nanofibers finer and more uniform and exhibits higher efficiency in the process of electrospinning. __________ Translated from Acta Polymerica Sinica, 2005, (5) (in Chinese)     

Micropatterns of double-layered nanofiber scaffolds with dual functions of cell patterning and metabolite detection

This paper describes the development of multi-functional nanofiber scaffolds consisting of multiple layers of nanofiber scaffolds and nanofiber-incorporated poly(ethylene glycol) (PEG) hydrogels. As a proof-of-concept demonstration, we fabricated micropatterned polymeric nanofiber scaffolds that were capable of simultaneously generating cellular micropatterns within a biomimetic environment and detecting cellular metabolic products within well-defined microdomains. To achieve this goal, we designed nanofiber scaffolds with both vertical and lateral microdomains. Vertically heterogeneous structures that were responsible for multi-functionality were realized by preparing double-layered nanofiber scaffolds consisting of an antibody-immobilized bottom layer of nanofibers and an upper layer of bare polystyrene (PS) nanofibers by a two-step sequential electrospinning process. Photopatterning of poly(ethylene glycol) (PEG) hydrogel on the electrospun nanofibers produced laterally heterogeneous micropatterned nanofiber scaffolds made of hydrogel microwells filled with a nanofibrous region, which is capable of generating cell and protein micropatterns due to the different interactions that cells and proteins have with PEG hydrogels and nanofibers. When HepG2 cells were seeded into resultant nanofiber scaffolds, cells selectively adhered within the 200 μm × 200 μm PS fiber microdomain and formed 180.2 ± 6.7 μm spheroids after 5 days of culture in the upper layer. Furthermore, immobilized anti-albumin in the bottom layer detected albumin secreted by micropatterned HepG2 cells with higher sensitivity than flat PS substrates, demonstrating successful accomplishment of dual functions using micropatterned double-layered nanofiber scaffolds.     

聚丙烯腈纳米纤维的再细化

通过电纺丝法研究了溶剂种类、溶液浓度、纺丝倾斜角、聚合物分子量对纳米纤维形态和直径的影响,寻找到最佳工艺条件,并得到了平均直径为20nm的超细纤维.     

Preparation and study of PPV/PVA nanofibers via electrospinning PPV precursor alcohol solution

We have found a simple method to prepare poly(phenylene vinylene) (PPV) nanofibers via electrospinning PPV precursor alcohol solution under annealed at 180 °C in a N₂ atmosphere. The nanofibers are uniform in diameter and long in decimeter magnitudes with resistance in decay, which makes them have potential applications in optical and electronic devices. The morphology can be better controlled by blend PPV precursor solution with poly(vinylalcohol) (PVA) aqueous solution. The fluorescence spectrum of PPV/PVA nanofibers exhibited appreciable blue shift, which made it possible to fabricate nanofibers with fluorescence from yellow-green to blue.