Photoinitiating monomers based on di‐ and triacryloylated hydroxylamine derivatives

The purpose of our study was to design a new class of acrylate‐based monomers with an UV‐cleavable heteroatom bond, offering the possibility to initiate radical polymerization upon irradiation with UV‐light. A method to derive the double bond conversion from the ATR‐IR spectra of the monomers and the cured polymers was employed, that enabled us to calculate the theoretical polymerization heats of the new monomers. Their photopolymerization properties were determined by Photo Differential Scanning Calorimetry. Surprisingly, some of these new compounds exhibited high photoinitiation activity, comparable to well‐established Type II photoinitiator systems like benzophenone/triethanolamine. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 392–403, 2009     

Influence of actinic wavelength on properties of light‐cured interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) composed of different acrylate/epoxide ratios, were synthesized under UV and visible‐LED curing conditions. The formation of the IPNs was explored in terms of phase separation, polymerization mechanisms, final mechanical properties and surface morphology. For these purpose, we uniquely combined results of miscibility investigations, confocal Raman microscopy, dynamical mechanical analysis and atomic force microscopy. Transparent films were obtained for all compositions and both irradiation sources. The thermo‐mechanical properties of different IPNs were associated to the presence of acrylate‐ or epoxide‐rich phases, as well as, mixed interphases, resulting from the high interpenetration between both networks. Although the final conversions were similar under UV and visible‐LED irradiation, we have found evidence that the visible‐cured samples provide higher IPN homogeneity and lower T_g, for a higher epoxide content. To explain this trend, the mechanisms and sequence of the acrylate or epoxide networks formation, under UV or LED irradiation, is discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1378‐1390     

Photo‐Rheometry/NIR Spectrometry: An in situ Technique for Monitoring Conversion and Viscoelastic Properties during Photopolymerization

Summary: A suitable rheometer for simultaneous dynamic mechanical analysis (DMA) and NIR (Near Infra‐Red) in situ analysis during UV curing was developed. The conversion and viscoelastic properties of a dimethacrylate/styrene‐based system were investigated. The results were plotted against both irradiation time and total average conversion. For the same conversion, a lower intensity delays the reaction but does not affect the viscoelastic properties.

A device for simultaneous photo‐rheology and NIR spectroscopy experiments.     

Polymerization shrinkage of (meth)acrylate determined by reflective laser beam scanning

The real‐time study of the shrinkage during UV‐curing of (meth)acrylate monomers is limited due to the very fast curing rate, their thin sample geometry (<100 μm), and low viscosity. We report a reflective laser scanning system for direct measurement of UV‐curing shrinkage. A low‐power laser beam at a wavelength of 650 nm, different from the polymerization wavelength (395 nm), was used. This noncontact method of measurement makes it possible to analyze the thin liquid monomer with a very low shrinkage (measuring accuracy 0.02 μm), and very fast curing rate (fast sampling speed of 50 KHz). Eight different kinds of UV monomers were tested using 2–5 mg specimens, and the shrinkage process was examined. The results proved that this new method was accurate and precise, and could be applied to different kinds of (meth)acrylates. Furthermore, the shrinkage capability of acrylic double bonds was determined as 23.98 mL/mol using this novel method. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and radical polymerization properties of thermal radical initiators based on o‐imino‐isourea: The effect of the alkyl side chain on the radical initiation temperature

Four types of thermal radical initiators (TRIs) that are based on o‐imino‐isourea with cyclohexyl and isopropyl groups were successfully synthesized, namely, C‐HexDCC, DiiprDCC, C‐HexDIC, and DiiprDIC. The free radical polymerization and thermal properties of those synthesized TRIs were determined via differential scanning calorimetry (DSC) (using n‐butyl acrylate) and thermogravimetric analysis (TGA), respectively. The TRI derivatives showed peak temperatures (T_max) from 89 to 97 °C in n‐butyl acrylate, and DiiprDIC, with isopropyl groups on both sides of the N O group, showed the lowest peak temperatures. The rates of N O bond homolysis (k_d) of all the TRIs were calculated from their half‐lives determined using real‐time nuclear magnetic resonance (NMR) spectroscopy, and their theoretical bond dissociation energies (BDEs) were calculated using density functional theory (DFT) calculations. The free radical polymerization of n‐butyl acrylate using each TRI was efficiently determined from T_peak of the DSC curves; conversions depending on polymerization temperature (80, 90, and 100 °C) were monitored to observe kinetic information of TRIs during polymerization. Furthermore, to investigate the use of TRIs in curing, we applied them to an automotive clear coating system and monitored the real‐time evolution of the elastic modulus (G′) during thermal curing using a rheometer for representative DiiprDIC. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1749–1756     

In situ Fourier transform near infrared spectroscopy monitoring of copper mediated living radical polymerization

In situ Fourier transform near infrared (FTNIR) spectroscopy was successfully used to monitor monomer conversion during copper mediated living radical polymerization with N‐(n‐propyl)‐2‐pyridylmethanimine as a ligand. The conversion of vinyl protons in methacrylic monomers (methyl methacrylate, butyl methacrylate, and N‐hydroxysuccinimide methacrylate) to methylene protons in the polymer was monitored with an inert fiber‐optic probe. The monitoring of a poly(butyl methacrylate‐b‐methyl methacrylate‐b‐butyl methacrylate) triblock copolymer has also been reported with difunctional poly(methyl methacrylate) as a macroinitiator. In all cases FTNIR results correlated excellently with those obtained by ¹H NMR. On‐line near infrared (NIR) measurement was found to be more accurate because it provided many more data points and avoided sampling during the polymerization reaction. It also allowed the determination of kinetic parameters with, for example, the calculation of an apparent first‐order rate constant. All the results suggest that FTNIR spectroscopy is a valuable tool to assess kinetic data. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4933–4940, 2004     

A convergence of photo‐bergman cyclization and intramolecular chain collapse towards polymeric nanoparticles

Employing enediynes as crosslinking precursors, a novel yet efficient strategy, namely photo‐triggered Bergman cyclization, was integrated with intramolecular chain collapse to yield polymeric nanoparticles with the size regime below 20 nm. Enediyne motif was designed delicately to possess a high photo‐reactivity, with the double bond locked in a methyl benzoate ring while triple bonds substituted with phenyls. Single electron transfer‐living radical polymerization was conducted to provide linear acrylate copolymers with controlled molecular weights and narrow polydispersities. Poly(butylarylate‐co‐ 5 ) went through UV‐irradiation with a concurrent Bergman cyclization, resulting in well‐defined ultrafine polymeric nanoparticles. Results from NMR, Raman scattering, photoluminescence and UV‐vis spectra corroborated the presence of conjugative structures in the polymeric nanoparticles, indicating the occurrence of photo‐induced Bergman cyclization. A series of other acrylate‐based nanoparticles were investigated to confirm the applicability of such a unique strategy in thermal sensitive but UV‐stable polymeric structures, making photo‐Bergman cyclization a promising tool towards polymeric nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of amphiphilic star block copolymers via diethyldithiocarbamate‐mediated living radical polymerization

(AB)_f star block copolymers were synthesized by the radical polymerization of a poly(t‐butyl acrylate)‐block‐poly(methyl methacrylate) diblock macroinitiator with ethylene glycol dimethacrylate in methanol under UV irradiation. Diblock macroinitiators were prepared by diethyldithiocarbamate‐mediated sequential living radical copolymerization initiated by (4‐cyano‐4‐diethyldithiocarbamyl)pentanoic acid under UV irradiation. The arm number (f) was controlled by the variation of the initial concentration of the diblock initiator. It was found from light scattering data that such star block copolymers (f ≥ 344) not only took a spherical shape but also formed a single molecule in solution. Subsequently, we derived amphiphilic [arm: poly(acrylic acid)‐block‐poly(methyl methacrylate)] star block copolymers by the hydrolysis of poly(t‐butyl acrylate) blocks. These amphiphilic star block copolymers were soluble in water because the external blocks were composed of hydrophilic poly(acrylic acid) chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3321–3327, 2006     

Influence of small amounts of addition‐fragmentation capable monomers on polymerization‐induced shrinkage stress

The effects of the addition of small amounts of multifunctional monomers that contain functional groups capable of undergoing addition‐fragmentation during radical polymerizations are investigated. Specifically, up to 6 wt % of phenyl trithiocarbonate (TTC)‐containing diacrylate was added to conventional thiol‐multiacrylate photopolymerizations where its addition led to up to 60% reduction in polymerization‐induced shrinkage stress. The higher levels of TTC achieve the lowest stress though they also significantly depress the polymerization rate. Using up to 0.5 wt % phenyl TTC successfully reduces the stress by nearly 20%, demonstrating the effectiveness of the phenyl TTC, while minimizing the influence that the RAFT activity of the TTC unit has on the polymerization rate. When the polymerization rates of the TTC‐containing resins are increased by changing the incident light intensity, complete acrylate conversion is achieved and the stress remains up to 40% lower in the TTC‐containing resins. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1315–1321     

Preparation of photocrosslinked sol‐gel composites based on urethane‐acrylic matrix,silsesquioxane sequences,TiO2, and Ag/Au Nanoparticles for use in photocatalytic applications

An acid urethane oligodimethacrylate based on poly(ethylene glycol) was synthesized and used in the preparation of hybrid composites containing silsesquioxane sequences and titania domains formed through sol‐gel reactions along with silver/gold nanoparticles (Ag/Au NPs) in situ photogenerated during the UV‐curing process. The photopolymerization kinetics studied by Fourier transform infrared spectroscopy and photoDSC showed that the photoreactivity of the investigated formulations depends on the amount of titanium butoxide (5–20 wt %) added in the system subjected to UV irradiation. The introduction of 1 wt % AgNO₃/AuBr₃ in formulations slightly improved the degree of conversion but diminished the polymerization rates. The formation of hybrid materials comprising predominantly amorphous TiO₂/SiO₂ NPs, with or without Ag/Au NPs, was confirmed through specific analyses. The evaluation of photocatalytic activity demonstrated that the synthesized hybrid films are suitable for the complete removal of organic pollutants (phenolic compounds) from water under UV irradiation (200–350 min) at low intensity (found in the solar radiation). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1189–1204     

Room‐temperature RAFT copolymerization of 2‐chloroallyl azide with methyl acrylate and versatile applications of the azide copolymers

A new vinyl azide monomer, 2‐chlorallyl azide (CAA), has been synthesized from commercially available reagent in one step. The reversible addition fragmentation chain transfer (RAFT) copolymerization of CAA with methyl acrylate (MA) was carried out at room temperature using a redox initiator, benzoyl peroxide (BPO)/N,N‐dimethylaniline (DMA), in the presence of benzyl 1H‐imidazole‐1‐carbodithioate (BICDT). The polymerization results showed that the process bears the characteristics of controlled/living radical polymerizations, such as the molecular weight increasing linearly with the monomer conversion, the molecular weight distribution being narrow, and a linear relationship existing between ln([M]₀/[M]) and the polymerization time. Chain extension polymerization was performed successfully to prepare block copolymer. Furthermore, the azide copolymers were functionalized by Cu^I‐catalyzed “click” reaction with alkyne‐containing poly(ethylene glycol) (PEG) to yield graft copolymers with hydrophilic PEG side chains. Surface modification of the glass sheet was successfully achieved via the crosslinking reaction of the azide copolymer under UV irradiation at ambient temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1348–1356, 2010     

Atom transfer radical polymerization of acrylates in an ionic liquid: Synthesis of block copolymers

Atom transfer radical polymerization (ATRP) of acrylates in ionic liquid, 1‐butyl‐3‐methylimidazolium hexaflurophospate, with the CuBr/CuBr₂/amine catalytic system was investigated. Sequential polymerization was performed by synthesizing AB block copolymers. Polymerization of butyl acrylate (monomer that is only partly soluble in an ionic liquid forming a two‐phase system) proceeded to practically quantitative conversion. If the second monomer (methyl acrylate) is added at this stage, polymerization proceeds, and block copolymer formed is essentially free of homopolymer according to size exclusion chromatographic analysis. The number‐average molecular weight of the copolymer is slightly higher than calculated, but the molecular weight distribution is low (M_w/M_n = 1.12). If, however, methyl acrylate (monomer that is soluble in an ionic liquid) is polymerized at the first stage, then butyl acrylate in the second‐stage situation is different. Block copolymer free of homopolymer of the first block (with M_w/M_n = 1.13) may be obtained only if the conversion of methyl acrylate at the stage when second monomer is added is not higher than 70%. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that irreversible deactivation of growing macromolecules is significant for methyl acrylate polymerization at a monomer conversion above 70%, whereas it is still not significant for butyl acrylate even at practically quantitative conversion. These results show that ATRP of butyl acrylate in ionic liquid followed by addition of a second acrylate monomer allows the clean synthesis of block copolymers by one‐pot sequential polymerization even if the first stage is carried out to complete conversion of butyl acrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2799–2809, 2002     

A new photoiniferter/RAFT agent for ambient temperature rapid and well‐controlled radical polymerization

Phenacyl morpholine‐4‐dithiocarbamate is synthesized and characterized. Its capability to act as both a photoiniferter and reversible addition fragmentation chain transfer agent for the polymerization of styrene is examined. Polymerization carried out in bulk under ultra violet irradiation at above 300 nm at room temperature shows controlled free radical polymerization characteristics up to 50% conversions and produces well‐defined polymers with molecular weights close to those predicted from theory and relatively narrow poyldispersities (M_w/M_n ～ 1.30). End group determination and block copolymerization with methyl acrylate suggest that morpholino dithiocarbamate groups were attained at the end of the polymer. Photolysis and polymerization studies revealed that polymerization proceeds via both reversible termination and RAFT mechanisms. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3387–3395, 2008     

Prediction of polymerization shrinkage using molecular modeling

Group interaction modeling (GIM) is used to predict the changes in the volume and, therefore, shrinkage of a wide variety of commonly encountered acrylate and methacrylate monomers during polymerization. The predictions of the model are in excellent agreement with experimental data available in the literature. It is demonstrated that, given appropriate estimations of the ultimate matrix morphology, GIM can be used to give estimates of polymerization shrinkage in three‐dimensional crosslinked polymer networks that relate well to experimental data available for dental composite matrices. GIM provides a very useful framework within which the phenomenon of polymerization shrinkage can be considered. The approach challenges certain common misconceptions relating conversion to shrinkage. The limitations of this approach are discussed, and targets for future research are clearly outlined that could extend the scope of this methodology to encompass novel systems for which morphological information is not available. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 528–548, 2003     

Efficient photopolymerization of thick pigmented systems using upconversion nanoparticles‐assisted photochemistry

Photopolymerization of thick pigmented systems still remains challenging due to the light screening effect of the pigments. Here, we present a facile method based on upconversion nanoparticles (UCNPs)‐assisted photochemistry to achieve efficient photopolymerization and improved curing depth of pigmented systems. Under a 980‐nm laser irradiation, UCNPs are able to convert NIR light into UV and visible light to activate photoinitiators for the initiation of polymerization. Influencing factors on photopolymerization were systematically investigated. With optimal parameters, 25.5 mm of photopolymerization depth combined with 70% of maximal double bond conversion was obtained. The peak temperature of 120.4 °C during UCNPs‐assisted photopolymerization is comparable with or lower than that of some reported frontal photopolymerization applied to prepare functional composite polymeric materials. Both indentation hardness and reduced modulus of the photocured materials using UCNPs as internal lamps were higher than those of the reference cured under traditional blue LED light. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 994–1002     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

Influence of the isomeric structures of butyl acrylate on its single‐electron transfer‐degenerative chain transfer living radical polymerization in water Catalyzed by Na2S2O4

The aim of this work is to the study the influence of the isomer structures of butyl acrylate monomer on the single‐electron transfer/degenerative chain transfer mediated living radical polymerization (SET‐DTLRP). The kinetic of isobutyl acrylate is determined for the first time by SET‐DTLRP in water catalyzed by sodium dithionite. The plots of number‐average molecular weight versus conversion and ln([M]₀/[M]) versus time are linear, demonstrating a controlled polymerization. The influence of the isomer t‐butyl, i‐butyl, and n‐butyl on the kinetics, properties, and stereochemistry of the reactions was assessed. To the best of our knowledge, there is no previous report dealing with the synthesis of PiBA by any LRP approach in aqueous medium. The results presented in this work suggest that the stability provided by the acrylate side group has an important influence in the polymerization process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6542–6551, 2008     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002     

Poly(ascorbyl acrylate)s: Synthesis and evaluation of their redox polymerization ability in the presence of hydrogen peroxide

In this work, a strategy for chemical synthesis of ascorbic acid functionalized polyacrylates (PAAA) was accomplished in a two‐step process, first a reversible addition fragmentation chain‐transfer (RAFT) polymerization on a benzyl‐protected ascorbyl acrylate monomer, followed by a deprotection (debenzylation) reaction. The polymers were characterized by ¹H NMR, ¹³C NMR and gel permeation chromatograph. The polymerization ability of redox pair including PAAA and H₂O₂ were conducted through the measurement of 2‐hydroxyethyl acrylate (HEA) conversion against time via real‐time FT‐NIR. It was found that PAAA in the presence of H₂O₂, independent on itself chain length, exhibited much faster polymerization than small molecule ascorbic acid (smAA) as reductant at identical condition. Interestingly, when the concentration of ascorbate repeating unit was over some critical value, the polymerization kinetics of HEA could be tunable by simply adjusting the initial molar ratio of reductant to oxidant and environmental pH. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photocleavable and tunable thermoresponsive amphiphilic random copolymer: Self‐assembly into micelles,dye encapsulation,and triggered release

A double‐responsive amphiphilic random copolymer (P(OEtOxA)‐ran‐PNBA) composed of thermoresponsive poly(oligo(2‐ethyl‐2‐oxazoline)acrylate) (P(OEtOxA)) segments and photocleavable poly(2‐nitrobenzyl acrylate) (PNBA) segments is synthesized via combination of cationic ring‐opening polymerization (CROP) and reversible addition‐fragmentation chain transfer (RAFT) polymerization techniques. The P(OEtOxA)‐ran‐PNBA copolymer exhibits lower critical solution (LCST)‐type soluble‐to‐turbid phase transition in water with tunable cloud point (T_cp) with respect to chain length of P(OEtOxA) segment present. The photocleavage of PNBA segments by UV irradiation transforms amphiphilic P(OEtOxA)‐ran‐PNBA to fully hydrophilic P(OEtOxA)‐ran‐poly(acrylic acid) resulting in the appreciable increase of T_cp of copolymer in aqueous solution. Owing to the amphiphilic nature, the P(OEtOxA)‐ran‐PNBA copolymer molecules self‐assemble into well‐dispersed spherical micelles in water. There is a disruption of the copolymer micelles with UV light irradiation as well as shrinkage of micellar size with increasing temperature above the LCST of copolymer in solution. Finally, the encapsulation of hydrophobic guest molecule (nile red) into P(OEtOxA)‐ran‐PNBA copolymer micelles and thermo‐ and photo‐triggered release of nile red are demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1714–1729