近红外光驱动的UCNPs/ZnxCd1-xS纳米复合结构的化学合成并用于光化学还原六价铬

近红外光约占入射太阳能的 44% 以上, 为实现太阳能量的最大化利用, 近红外光 (NIR) 驱动的光催化技术成为科学研究的热点. 由于上转换荧光纳米材料 (UCNPs) 是优良的红外能量转换器, 合金半导体 ZnxCd1-xS 具有较好的化学稳定性以及生物相容性, 本文发展了一种简易的水热法, 将 UCNPs 和 ZnxCd1-xS 合金结合, 成功构建了 NIR 与可见光响应的核壳纳米结构. 由于这两种材料的晶格失配度较高, 很难直接外延生长, 我们通过引入非晶 TiO2将形成的催化剂纳米颗粒ZnxCd1-xS 紧紧束缚在 UCNPs 外面形成蛋黄-蛋壳结构, 在 NIR 光照下获得了较高的能量转换效率.首先, 在 UCNPs 外面外延生长一层 AA-Zn[(OH)4]2–复合物, 形成 UCNPs@AA-Zn[(OH)4]2–复合纳米结构, 然后在其核壳结构外面外延生长薄层的非晶 TiO2, 以稳定后续要制备的合金半导体 ZnxCd1-xS; 在水热条件下, UCNPs@AA-Zn[(OH)4]2–/TiO2与醋酸镉和硫脲反应, 形成 UCNPs@ZnxCd1-xS/TiO2复合材料. 在此, 我们选择β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%) 作为 NIR 的能量转换器. 样品的形貌、物相及化学组成分别采用场发射扫描电子显微镜、透射电子显微镜、X 射线衍射和原子吸收光谱法进行表征.研究表明, 我们成功制备了具有蛋黄-蛋壳结构的 UCNPs@ZnxCd1-xS/TiO2纳米颗粒. 此外, 非晶态 TiO2将 UCNPs 与ZnxCd1-xS 紧密结合, 对最终样品 UCNPs@ZnxCd1-xS 核壳纳米粒子的形成起到重要作用. 而且, 合金 ZnxCd1-xS 的化学组成可通过调整镉源和锌源的用量进行调节. 所制备的 UCNPs@ZnxCd1-xS 核壳纳米粒子在 NIR 光线或模拟太阳光照射下显示出高效的光化学还原 Cr(VI) 性能. 溶液中 70% 以上的 Cr(VI) 在 NIR 光照射 30 min 后被还原为 Cr(III). 本研究将为环境污水处理和太阳能利用提供一种可供选择的策略, 且所制的复合纳米结构在肿瘤治疗、药物释放和能量转换等领域也有着潜在的应用价值.     

Design of BiOBr0.25I0.75for synergy photoreduction Cr（Ⅵ） and capture Cr（Ⅲ） over wide pH range

Conversion of hexavalent chromium (Cr（Ⅵ）) to trivalent chromium (Cr（Ⅲ）) is an effective way to reduce its environmental risk,especially via photoreduction process.However,over a wide range of p H values,it is still a great challenge to achieve a high removal rate,and the disposal of produced Cr（Ⅲ） should be concerned.In this work,we implemented a high removal rate at 98%for Cr（Ⅵ） and total chromium(Cr（T）) over a wide p H range （4–10） through the synergistic effect of adsorption,photoreduction an...     

MoSe2/ZnO/ZnSe复合物用于高效可见光催化还原Cr（Ⅵ）（英文）

半导体光催化还原Cr(VI)为Cr(III)被认为是一种能够解决环境和能源问题的绿色技术.典型光催化剂ZnO和TiO2在还原重金属离子和二氧化碳,降解有机污染物,分解水等领域均已被证明是一种有潜力的光催化剂.但是,它们窄的太阳能吸收范围和快的光生载流子复合限制了其实际应用.因此,探索能够响应可见光的高效光催化剂是非常急切的课题.研究表明,引入窄带半导体构筑异质结复合光催化剂是一种提高ZnO和TiO2可见光催化活性的有效途径.随着二维石墨烯研究的热潮,具有类石墨烯结构的材料,如过渡金属硫化物MX2(M=Mo,W,Nb,Ta,Zr;X=S,Se)以其独特的“三明治夹心”层状结构受到了研究者的高度重视.在这些MX2材料中,MoS2是间接带隙半导体,能带为1.2 eV,并且随着层数的减小,能带增加到1.8 eV,因此,它对可见光具有很好的吸收能力.MoS2具有比表面积大、吸附能力强、反应活性高等优异的物理和化学性能,被广泛应用于光催化、制氢反应、太阳能电池及锂离子电池等领域.类似于MoS2,MoSe2也应该是一种具有潜力的窄带光催化剂.不幸的是,对于MoSe2在光催化还原Cr(VI)中的应用,还鲜有报道.本文基于ZnO,ZnSe和MoSe2构筑复合光催化剂,由于它们存在阶梯型的能级结构,使得此复合物能够展现优异的可见光催化性能,这是一种提高ZnO可见光催化活性的有效方法.扫描电子和高分辨透射电子显微镜结果显示,ZnO和ZnSe纳米颗粒分散在二维MoSe2片周围,形成很好的界面接触,有利于光生电子-空穴对的快速转移和分离,促进光催化反应的进行.紫外可见吸收光谱结果表明,MoSe2/ZnO/ZnSe(ZM)复合物在可见光区域展现了很好的吸收.电化学阻抗谱和光电流响应曲线结果表明,ZM复合物中光生载流子复合被有效抑制,延长了其寿命.光催化还原Cr(VI)的实验结果发现,与纯ZnO相比,ZM复合物展现了优异的光催化活性.在可见光照射180 min后,ZM复合物对Cr(VI)的还原率达到100%.优异的光催化活性归因于其优异的可见光吸收、阶梯型能级结构和光生载流子的有效转移.光催化重复性实验和X射线衍射图结果表明,在光催化反应之后ZM复合物的结构没有发生变化,具有良好的稳定性.本工作可为进一步设计具有理想功能的二维复合光催化剂提供有价值的信息.     

Speciation of Cr(III) and Cr(VI) in water after preconcentration of its 1,5-diphenylcarbazone complex on amberlite XAD-16 resin and determination by FAAS

A simple and sensitive method for the speciation, separation and preconcentration of Cr(VI) and Cr(III) in tap water was developed. Cr(VI) has been separated from Cr(III) and preconcentrated as its 1,5-diphenylcarbazone complex by using a column containing Amberlite XAD-16 resin and determined by FAAS. Total chromium has also been determined by FAAS after conversion of Cr(III) to Cr(VI) by oxidation with KMnO₄. Then, Cr(III) has been calculated by subtracting Cr(VI) from the total. The effect of acidity, amount of adsorbent, eluent type and flow rate of the sample solution on to the preconcentration procedure has been investigated. The retained Cr(VI) complex was eluated with 10 ml of 0.05 mol l⁻¹ H₂SO₄ solution in methanol. The recovery of Cr(VI) was 99.7±0.7 at 95% confidence level. The highest preconcentration factor was 25 for a 250 ml sample volume. The detection limit of Cr(VI) was found as 45 μg l⁻¹. The adsorption capacity of the resin was found as 0.4 mg g⁻¹ for Cr (VI). The effect of interfering ions has also been studied. The proposed method was applied to tap water samples and chromium species have been determined with the relative error <3%.     

Cathodic Reduction of Chromium on a Surface of Nickel Modified by Aromatic Carboxylic Acids

Effect of organic compounds (salicylic, acetylsalicylic, and p-nitrobenzoic acids) adsorbed on a nickel surface or introduced into solution on the cathodic reduction of Cr(VI) is studied by measuring voltammetric curves in a wide potential range up to the beginning of electrodeposition of black chromium. If the adsorbate is salicylic or p-nitrobenzoic acid, only the maximum current corresponding to incomplete reduction Cr(VI) Cr(III) increases in cathodic polarization curve (PC). On a surface modified by acetylsalicylic acid, in addition to an increase in the maximum current, all parts of PC shift towards positive potentials. The Cr(VI) reduction on modified surfaces accelerates presumably due to the electron transfer from the cathode surface onto Cr(VI) atoms, accelerated by the formation of bridges with an increased electron conduction.     

Highly efficient removal of Cr(VI) from wastewater via adsorption with novel magnetic Fe3O4@C@MgAl-layered double-hydroxide

Novel magnetic Fe₃O₄@C@MgAl-layered double-hydroxide (LDH) nanoparticles have been successfully prepared by the chemical self-assembly methods. The properties of surface functional groups, crystal structure, magnetism and surface morphology of magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermal gravity-differential thermal gravity (TG-DTG), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The adsorption studies of the novel adsorbent in removing heavy metals Cr (VI) from waste water showed that the maximum absorption amount of Cr(VI) was 152.0 mg/g at 40℃ and pH 6.0. The excellent adsorption capacity of the Fe₃O₄@C@MgAl-LDH nano-absorbents plus their easy separation, environmentally friendly composition and reusability makes them more suitable adsorbents for the removal of metal ions from waste water.     

Facile synthesis of SrTiO3 hollow microspheres built as assembly of nanocubes and their associated photocatalytic activity

SrTiO(3) hollow microspheres built by regular nanocubes were synthesized by a general and facile hydrothermal method. The resulting samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD) measurements. Owing to the special hollow structure, the synthesized SrTiO(3) microspheres exhibit a superior photocatalytic activity in photoreduction of Cr(VI). As anatase and titanate contain common structural features, it makes this in situ phase transition from anatase to titanate relatively easy. Therefore, this method is rather convenient for controlling the morphology of the products by varying the presynthesized anatase TiO(2) precursor.     

高碳铬铁在氢氧化钠水溶液中电化学氧化过程

铬铁电化学氧化法是一种新的制备铬酸钠的方法,然而高碳铬铁在NaOH水溶液中的电化学氧化过程尚不明确。 采用循环伏安法(CV)、稳态极化法(LSV)等电化学测试方法对金属铬、高碳铬铁在NaOH水溶液中的电化学氧化过程进行研究,通过扫描电子显微镜(SEM)、能量散射谱(EDS)和X射线光电子能谱(XPS)对高碳铬铁电解后固相产物表征,判断固相产物的组成。 结果表明,高碳铬铁不同于金属铬的电氧化过程,它在NaOH溶液中通过Cr(0)→Cr(Ⅵ)的电氧化方式生成铬酸钠,中间产物Cr(OH)₃和Fe(0)发生电化学反应生成稳定的FeCr₂O₄。 随着NaOH浓度的增加,电势较低时,受高碳铬铁中Fe(0)的影响,高碳铬铁容易在NaOH水溶液中发生钝化;当电势足够正时,钝化膜溶解,生成铬酸钠、氢氧化铁和亚铬酸亚铁,同时,阳极表面有氧气析出。 高碳铬铁电化学氧化制备铬酸钠的适宜条件:碱浓度≥2 mol/L,阳极电势≥1.6 V(vs.SCE)。     

Preconcentration and speciation of chromium in a sequential injection system incorporating dual mini-columns coupled with electrothermal atomic absorption spectrometry

A procedure for chromium preconcentration and speciation with a dual mini-column sequential injection system coupled with electrothermal atomic absorption spectrometry (ETAAS) was developed. At pH 6, the sample solution was firstly aspirated to flow through a Chlorella vulgaris cell mini-column on which the Cr(III) was retained. The effluent was afterwards directed to flow through a 717 anion exchange resin mini-column accompanied by the retention of Cr(VI). Thereafter, Cr(III) and Cr(VI) were eluted by 0.04 mol L^− 1 and 1.0 mol L^− 1 nitric acid, respectively, and the eluates were quantified with ETAAS. Chemical and flow variables governing the performance of the system were investigated. By using a sampling volume of 600 µL, sorption efficiencies of 99.7% for Cr(III) and 99% for Cr(VI) were achieved along with enrichment factors of 10.5 for Cr(III) and 11.6 for Cr(VI), within linear ranges of 0.1–2.5 µg L^− 1 for Cr(III) and 0.12–2.0 µg L^− 1 for Cr(VI). Detection limits of 0.02 µg L^− 1 for Cr(III) and 0.03 µg L^− 1 for Cr(VI) along with RSD values of 1.9% for Cr(III) and 2.5% for Cr(VI) (1.0 µg L^− 1, n = 11) were obtained. The procedure was validated by analyzing a certified reference material of GBW08608 and further demonstrated by chromium speciation in river and tap water samples.     

Effect of Added Pyridine Bases on the Electron Transfer Reaction of Chromium(VI) with Organic Sulfides. Spectral Evidence for the Formation of a Chromium(V) Intermediate

The electron transfer reaction of Cr(VI) with organic sulfides is facilitated by added pyridine bases 2,2′-bipyridine, 1,10-phenanthroline, picolinic acid and pyridine 2,6-dicarboxylic acid. The added base forms a Cr(VI)-base adduct carrying positive charge which acts as a more reactive oxidant compared to Cr(VI). UV–Visible spectrophotometric study provides evidence for the formation of Cr(V) as the intermediate. The reactions in the absence and presence of pyridine bases follow the reactivity–selectivity principle.