Five-membered ring chelate complexes of Ni(II), Pd(II) and Pt(II) derived of di-(2-pyridyl)-N-ethylimine

Cis-diaquobis{di-(2-pyridyl)-N-ethylimine}nickel(II) chloride (2) was obtained from the reaction of di-(2-pyridyl)-N-ethylimine (1) and [NiCl₂dppe] [dppe = cis-1,2-bis(diphenylphosphino)ethylene] in a 2:1 ratio in hot acetonitrile. Cis-dichloro{di-(2-pyridyl)-N-ethylimine}palladium(II) (3) and cis-dichloro{di-(2-pyridyl)-N-ethylimine}platinum(II) (4) complexes were obtained from the reaction of MCl₂ (M = Pd, Pt) and (1) in equimolar ratio in hot acetonitrile. Compounds 1–4 were characterized by IR spectroscopy, elemental analysis, and mass spectrometry; the complexes 3 and 4 were characterized in solution by NMR. In addition, solid state structures of compounds 1–4 were determined using single crystal X-ray diffraction analyses. X-ray diffraction data of the complexes 3 and 4 showed a distorted square planar local geometry at palladium and platinum atoms with the chlorine atoms in a cis-coordination; in 2 a local octahedral geometry at nickel atom was observed. Complexes 3 and 4 are arranged as dimers with a M?M distance of 3.4567(4) Å (M = Pd) and 3.4221(4) Å (M = Pt), respectively; 2 consists of units linked by intermolecular hydrogen bonding.     

Formation of bis- and tris[2]catenanes via the cross-catenation of Pd(II)- and Pt(II)-linked coordination rings

We have demonstrated the self-assembly of linear oligo[2]catenanes via selective cross-catenation. A Pd(II)-linked double looped molecule 1 was transformed into the cyclic trimer c-(1)₃ through the catenation. When 1 was treated with a kinetically inert Pt(II)-linked single looped molecule 2a in aqueous media (1:1.2 DMSO/H₂O) at room temperature, linear oligo[2]catenanes of 2a-(1)_n-2a (n=1 and 2) were selectively obtained, because the kinetically inert Pt(II)-linked ring 2a is allowed to thread on only kinetically labile Pd(II)-linked ring of 1. The distribution of the oligomers depends on the monomer ratio of 1 to 2a. When the ratio of 1 to 2a was 1:2, bis[2]catenane 3a (2a-1-2a) was quantitatively assembled. When the ratio of 1 to 2a was 1:1, not only 3a but also tris[2]catenane 4 (2a-1-1-2a) was assembled. The ratio of 3a to 4 was carefully determined to be 1:1 by NMR. The lengths of 3a and 4 in an extended conformation were estimated by MD/MM2 simulation to be 3.6 and 5.4 nm, respectively.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Novel Ag(I), Pd(II), Ni(II) complexes of N,N′-bis-(2,2-diethoxyethyl)imidazole-2-ylidene: Synthesis, structures, and their catalytic activity towards Heck reaction

Tetra-ether substituted imidazolium salts, LHX (where LH = N,N′-bis(2,2-diethoxyethyl)imidazolium cation and X = Br, BF₄, PF₆, BPh₄, NO₃ and NTf₂ anions) were derived from imidazole. Attempts to produce aldehyde functionalized imidazolium salt through acid hydrolysis of LHBr resulted an unexpected tetra-hydroxy compound L_AHBr and the dialdehyde compound L_BHBr. Reaction of LHBr with Ag₂O afforded [L₂Ag][AgBr₂] (1). Mononuclear Pd-complex trans-[L₂PdCl₂] (2) and dinuclear Pd-complex [(LPdCl₂)₂] (3) were obtained by 1:1 and 1:2 reaction of in situ generated Ag-carbene with Pd(CH₃CN)₂Cl₂. cis-[LPdPPh₃Cl₂] (4) was synthesized from reaction of PPh₃ with dinuclear complex 3. Hydrolysis of 3 under acidic conditions also generates a hydroxy derivative 3A and the aldehyde derivative 3B. Direct heating of LHBr with Ni(OAc)₂ · 4H₂O at 120 °C under vacuum generated trans-[L₂NiBr₂] (5). These complexes were characterized by NMR, mass, elemental analysis, and X-ray single crystal diffraction analysis. Pd--Pd interaction was observed in 3. All the Pd complexes exhibited excellent catalytic activity in Heck reaction.     

Bismuth(III) bis(trifluoromethanesulfonyl)amide

Bismuth(III) bis(trifluoromethanesulfonyl)amide (Bi(NTf₂)₃, 3) has been prepared from the reaction of protiodemetallation of tri-p-tolylbismuth by a stoichiometric amount of bis(trifluoromethanesulfonyl)amine (1). The intermediates BiPh_3−n(NTf₂)_n (n=2 (4), 1 (5)) resulting from the reaction of 1 with triphenylbismuth have also been isolated. The amide 3 was able to catalyze the benzoylation and the benzenesulfonylation of toluene.     

Synthesis and reactivity of new functionalized Pd(II) cyclometallated complexes with boronic esters

Treatment of the functionalized Schiff base ligands with boronic esters 1a, 1b, 1c and 1d with palladium (II) acetate in toluene gave the polynuclear cyclometallated complexes 2a, 2b, 2c and 2d, respectively, as air-stable solids, with the ligand as a terdentate [C,N,O] moiety after deprotonation of the -OH group. Reaction of 1j with palladium (II) acetate in toluene gave the dinuclear cyclometallated complex 5j. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species 3a, 3b, 3c, 3d and 6j with cleavage of the polynuclear structure. Treatment of 2c with the diphosphine Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) in 1:2 molar ratio gave the dinuclear cyclometallated complex 4c as an air-stable solid.Deprotection of the boronic ester can be easily achieved; thus, by stirring the cyclometallated complex 3a in a mixture of acetone/water, 3e is obtained in good yield. Reaction of the tetrameric complex 2a with cis-1,2-cyclopentanediol in chloroform gave complex 2c after a transesterification reaction. Under similar conditions complexes 3a and 3d behaved similarly: with cis-1,2-cyclopentanediol, pinacol or diethanolamine complexes 3c, 3b, 3g and 3f, were obtained. The pinacol derivatives 3b and 3g experiment the Petasis reaction with glyoxylic acid and morpholine in dichloromethane to give complexes 3h, and 3i, respectively.     

Zn(II), Cd(II) and Hg(II) complexes with 1-(p-methoxybenzyl)-2-(p-methoxyphenyl)benzimidazole: Syntheses, structures and luminescence

Five coordination compounds Zn(mbmpbi)₂Cl₂ (1), Zn(mbmpbi)₂Br₂ (2), Cd(mbmpbi)₂Cl₂ (3), Hg(mbmpbi)₂Cl₂ (4) and Hg(mbmpbi)₂Br₂ (5) were synthesized by the reaction of 1-(p-methoxybenzyl)-2-(p-methoxyphenyl)benzimidazole (mbmpbi) with the corresponding metal halides. The complexes have been characterized by elemental analysis, conductance measurements, FT-IR, ¹H NMR and photoluminescence spectral studies. The ligand mbmpbi exhibits the N-benzimidazole coordination. The structures of 3-5 have been determined by single crystal X-ray diffraction. These three complexes are isostructural, crystallizing in the monoclinic system, P2/n space group with a distorted tetrahedral geometry around the metal ion. Zn(II) and Cd(II) complexes show strong blue emission in solid state at room temperature.     

Syntheses and catalytic activities of Pd(II) dicarbene and hetero-dicarbene complexes

A series of palladium(II) complexes (1-6) bearing cis-chelating homo-dicarbene ligands with varying alkyl bridges (C1-C3) and N-heterocyclic backbones (imidazole and benzimidazole) have been synthesized by reaction of Pd(OAc)₂ with the respective diazolium bromides (A·2HBr - F·2HBr) in DMSO. A comparative catalytic study employing aryl chlorides in the Mizoroki-Heck reaction revealed the superiority of methylene- and propylene-bridged dibenzimidazolin-2-ylidenes over their imidazole-derived analogues. Based on these results, two new propylene-bridged hetero-dicarbene complexes (7 and 8) were designed containing a mixed benzimidazole/imidazole-derived NHC-donor set. Notably, both complexes outperformed their homo-dicarbene analogues, which may be due to the electronic asymmetry induced by hetero-dicarbene ligands. The molecular structures of complex 6 and 8 are also presented.     

Syntheses, structural and spectroscopic characterization of novel zinc(II)-bis(trithiocarbimato) complexes and bis(N-methylsulfonyldithiocarbimate)-sulfide

Four zinc(II)-bis(trithiocarbimato) complexes with the general formula A₂[Zn(RSO₂NCS₃)₂] [A = Ph₄P⁺: R = CH₃ (1), 4-CH₃C₆H₄ (2); A = Bu₄N⁺: R = CH₃ (3), 4-CH₃C₆H₄ (4)] were obtained by the reaction of sulfur with the correspondent zinc(II)-bis(dithiocarbimato) complexes. Additionally, the compound (Ph₄P)₂[(CH₃SO₂NCS₂)₂S)] (5) was prepared from the potassium methylsulfonildithiocarbimate by oxidation with iodine. The compounds were characterized by elemental analyses and IR, ¹H NMR and ¹³C NMR spectroscopies. The compounds 4 and 5 were also characterized by X-ray diffraction techniques. The compound 4 crystallizes in the centrosymmetric space group C2/c of the monoclinic system. The Zn(II) is in a distorted tetrahedral environment (ZnS₄) in compound 4, and differ from the coordination mode observed in compound 1, which involves one sulfur and one nitrogen atom of each trithiocarbimate ligand. Compound 5 is the first example of a compound containing a bis(N-alkylsulfonyldithiocarbimate)-sulfide dianion and crystallises in the non-centrosymmetric space group P4₁2₁2 of the tetragonal system.     

Syntheses and structures of iron carbonyl complexes derived from N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine and N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine

The reaction of N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine (1) with Fe₂(CO)₉ in refluxing acetonitrile yielded di-(μ₃-thia)nonacarbonyltriiron (2), μ-[N-(5-methyl-2-thienylmethyl)-η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido]hexacarbonyldiiron (3), and N-(5-methyl-2-thienylmethylidene)amine (4). If the reaction was carried out at 45 °C, di-μ-[N-(5-methyl-2-thienylmethylidene)-η¹(N);η¹(S)-2-thiolethylamino]-μ-carbonyl-tetracarbonyldiiron (5) and trace amount of 4 were obtained. Stirring 5 in refluxing acetonitrile led to the thermal decomposition of 5, and ligand 1 was recovered quantitatively. However, in the presence of excess amount of Fe₂(CO)₉ in refluxing acetonitrile, complex 5 was converted into 2-4. On the other hand, the reaction of N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine (6) with Fe₂(CO)₉ in refluxing acetonitrile produced 2, μ-[N-(6-methyl-2-pyridylmethyl)-η¹ (N_py);η¹:η¹(N); η¹:η¹(S)-2-thiolatoethylamido]pentacarbonyldiiron (7), and μ-[N-(6-methyl-2-pyridylmethylidene)-η²(C,N);η¹:η¹(S)-2- thiolethylamino]hexacarbonyldiiron (8). Reactions of both complex 7 and 8 with NOBF₄ gave μ-[(6-methyl-2-pyridylmethyl)-η¹(N_py);η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido](acetonitrile)tricarbonylnitrosyldiiron (9). These reaction products were well characterized spectrally. The molecular structures of complexes 3, 7-9 have been determined by means of X-ray diffraction. Intramolecular 1,5-hydrogen shift from the thiol to the methine carbon was observed in complexes 3, 7, and 9.     

Synthesis of [Ru(CO)2(PPh3)(SP)] and [Ru(CO)(PPh3)2(SP)] and their catalytic activities for the hydroamination of phenylacetylene

The reaction of [Ru(CO)₂(PPh₃)₃] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)₂(PPh₃)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC₆H₄NN)(CO)₂(PPh₃)₂]BF₄ (4) with NaBH₄ and 2 in 50% yield. When “Ru(CO)(PPh₃)₃” generated by the reaction of [RuH₂(CO)(PPh₃)₃] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh₃)₂(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH₄PF₆ or H₃PW₁₂O₄₀ proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H₃PW₁₂O₄₀ as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.     

Synthesis and structure of highly substituted pyrazole ligands and their complexes with platinum(II) and palladium(II) metal ions

Reaction of 3-methoxycarbonyl-2-methyl- or 3-dimethoxyphosphoryl-2-methyl-substituted 4-oxo-4H-chromones 1 with N-methylhydrazine resulted in the formation of isomeric, highly substituted pyrazoles 4 (major products) and 5 (minor products). Intramolecular transesterification of 4 and 5 under basic conditions led, respectively, to tricyclic derivatives 7 and 8. The structures of pyrazoles 4a (dimethyl 2-methyl-4-oxo-4H-chromen-3-yl-phosphonate) and 4b (methyl 4-oxo-2-methyl-4H-chromene-3-carboxylate) were confirmed by X-ray crystallography. Pyrazoles 4a and 4b were used as ligands (L) in the formation of ML₂Cl₂ complexes with platinum(II) or palladium(II) metal ions (M). Potassium tetrachloroplatinate(II), used as the metal ion reagent, gave both trans-[Pt(4a)₂Cl₂] and cis-[Pt(4a)₂Cl₂], complexes with ligand 4a, and only cis-[Pt(4b)₂Cl₂] isomer with ligand 4b. Palladium complexes were obtained by the reaction of bis(benzonitrile)dichloropalladium(II) with the test ligands. trans-[Pd(4a)₂Cl₂] and trans-[Pd(4b)₂Cl₂] were the exclusive products of these reactions. The structures of all the complexes were confirmed by IR, ¹H NMR and FAB MS spectral analysis, elemental analysis and Kurnakov tests.     

Preparation, crystal structure, and spectroscopic, chemical, and electrochemical properties of (2E,4E)-4-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene

Wittig reaction of 3-[4-(dimethylamino)phenyl]propanal (5) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (4) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title (2E,4E)-1,3-butadiene derivative 6E in 19% isolated yield. Spectroscopic properties, crystal structure, and electrochemical behavior of the obtained new extended π-electron system 6E, compared with those of the previously reported (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene (12), are documented. Furthermore, reaction of 6E with 1,1,2,2-tetracyanoethylene (TCNE) in benzene at 25 °C for 24 h under argon affords a new Diels-Alder adduct 8 in 59% isolated yield. Along with spectroscopic properties of the [π4+π2] cycloaddition product 8, the crystal structure, possessing a cis-3,6-substituted 1,1,2,2-tetracyano-4-cyclohexene unit, is shown. Moreover, reaction of 6E with (E)-1,2-dicyanoethylene (DCNE) under the same reaction conditions as the above gives no product; however, this reaction in p-xylene at reflux temperature (138 °C) for four days under argon affords a new Diels-Alder adduct 9 in 54% isolated yield. Although reaction of 6E with DCNE in toluene at reflux temperature (110 °C) for four days under argon provides 9 very slightly, reaction of 6E with dimethyl acetylenedicarboxylate (DMAD) in toluene at reflux temperature for two days under argon yields a new Diels-Alder adduct 10, in 58% isolated yield, which upon oxidation with MnO₂ in CH₂Cl₂ at 25 °C for 1 h gives 11, converting a (CH₃)₂N-4″ into CH₃NH-4″ group, in 37% isolated yield. The crystal structure of 11 supports the molecular structure 10 possessing a partial structure cis-3,6-substituted 1,2-dimethoxycarbonyl-1,4-cyclohexadiene. The title basic studies on the above are reported in detail.     

Cyclopalladated complexes with N-(benzoyl)-N-(2,4-dimethoxybenzylidene)hydrazine: syntheses, characterization and structural studies

Cyclopalladated complexes with the Schiff base N-(benzoyl)-N^′-(2,4-dimethoxybenzylidene)hydrazine (H₂L, 1) have been described. The reaction of 1 with Li₂[PdCl₄] in methanol yields the complex [Pd(HL)Cl] (2). [Pd(HL)(CH₃CN)Cl] (3) has been prepared by dissolving 2 in acetonitrile. In methanol-acetonitrile mixture, treatment of 2 with two mole equivalents of PPh₃ produces [PdL(PPh₃)] (4) and that with one mole equivalent of PPh₃ produces [Pd(HL)(PPh₃)Cl] (5). Crystallization of 2 from dmso-d₆ results into isolation of [Pd(HL)((CD₃)₂SO)Cl] (6). In 2, the monoanionic ligand (HL⁻) is C,N,O-donor and the Cl-atom is trans to the azomethine N-atom. In 3, 5 and 6, HL⁻ is C,N-donor and the Cl-atom is trans to the metallated C-atom. The remaining fourth coordination site is occupied by the N-atom of CH₃CN, the P-atom of PPh₃ and the S-atom of (CD₃)₂SO in 3, 5 and 6, respectively. Thus on dissolution in acetonitrile and dmso and in reaction with stoichiometric PPh₃ the incoming ligand imposes a rearrangement of the coordinating atoms on the palladium centre. On the other hand, in presence of excess PPh₃ deprotonation of the amide functionality in 2 occurs and the Cl-atom is replaced by the P-atom of PPh₃ to form 4. Here the dianionic ligand (L²⁻) remains C,N,O-donor as in 2. The compounds have been characterized with the help of elemental analysis (C, H, N), infrared, ¹H NMR and electronic absorption spectroscopy. Molecular structures of 3, 4, and 6 have been determined by X-ray crystallography.     

Chronoamperometric study and X-ray analysis of Ru(II)-pdto (1,8-bis-(2-pyridyl)-3,6-dithiaoctane) complexes with substituted 1,10-phenanthrolines

This work presents cyclic voltammetry and double potential step chronoamperometry experiments corresponding to the electrochemical reduction of the substituted 1,10-phenanthroline ligands in the coordination compounds [Ru(pdto)(1,10-phenanthroline)]Cl₂ (1), [Ru(pdto)(5,6-dimethyl-1,10-phenanthroline)]Cl₂ (2), [Ru(pdto)(4,7-diphenyl-1,10-phenanthroline)]Cl₂ (3), [Ru(pdto)(4,7-dimethyl-1,10-phenanthroline)]Cl₂ (4) and [Ru(pdto)(3,4,7,8-tetramethyl-1,10-phenanthroline)]Cl₂ (5). These studies were performed in order to evaluate the stability of the electrogenerated chemical species. An EC_i mechanism for all the complexes was proposed and the rate constant value (k₁) for the chemical coupled reaction was estimated. The stability is discussed in terms of the rate constant value (k₁) and the π*-acceptor properties.     

2-Diphenylphosphino-2′-hydroxybiphenyl-based P-ligands and their platinum(II) complexes

2-Diphenylphosphino-2′-hydroxybiphenyl (2), become readily available via a ring opening reaction of a dibenzo[c.e][1,2]oxaphosphorine, was utilized as P-ligand in complexation with dichlorodibenzonitrile platinum to give a Cl₂Pt2₂ complex (4) with trans geometry. The O-benzyl derivative (5) could not be involved in complexation. A bidentate P-ligand (7) obtained by the interaction of hydroxy-diphenylphosphinobiphenyl 2 with chloro-dibenzo[c.e][1,2]oxaphosphorine (1) formed an 8-ring transition metal complex (Cl₂Pt7 = 9) in reaction with PtCl₂(PhCN)₂. Under the conditions of chromatography, separation of the diastereomers of 7 was not possible due to a partial isomerisation by rotation around the biphenyl axis of the molecule that is justified by the average barrier height of 6.0 kcal/mol.The stereostructure of P-ligands 2 and 7, as well as platinum complexes 4 and 9 was evaluated by B3LYP quantum chemical calculations.     

Au(I) and Au(III) complexes of a sterically bulky benzimidazole-derived N-heterocyclic carbene

The reaction of [AuCl(SMe₂)] with in situ generated [AgCl(ⁱPr₂-bimy)] (ⁱPr₂-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene), which in turn was obtained by the reaction of Ag₂O with 1,3-diisopropylbenzimidazolium bromide (ⁱPr₂-bimyH⁺Br⁻, A), afforded the monocarbene Au(I) complex [AuCl(ⁱPr₂-bimy)] (1). Subsequent reaction of 1 and the ligand precursor ⁱPr₂-bimyH⁺BF₄⁻, (B) in acetone in the presence of K₂CO₃ yielded the bis(carbene) complex [Au(ⁱPr₂-bimy)₂]BF₄ (2) as a white powder in 80% yield. The oxidative addition of elemental iodine to complex 2 gave the bis(carbene) Au(III) complex trans-[AuI₂(ⁱPr₂-bimy)₂]BF₄ (3) as an orange-red powder in 92% yield. All complexes 1-3 have been fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry, elemental analysis, and X-ray single crystal diffraction. Complexes 1 and 2 adopt a linear geometry around metal centers as expected for d¹⁰ metals. The geometry around the Au(III) metal center in 3 is essentially square-planar with two carbene ligands in trans-position to each other. Complex 3 shows absorption and photoluminescence properties owing to a ligand to metal charge transfer.     

Six-membered ring chelate complexes of Pd(II) and Pt(II) derived from di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane

Cis-[MLCl₂] complexes of di-(2-pyridyl)pyrimidin-2-ylsulfanylmethane ligand (L), where M = Pd (1), and M = Pt (2) have been synthesized. Reaction of 1 with L in presence of Na[BF₄] and hot acetonitrile produced the complex [PdL₂](BF₄)₂ (3). Complexes 1-3 and ligand L have been characterized by elemental analyses, IR and NMR spectroscopy. Crystal structures of 1, 3 and L were determined by single crystal X-ray diffraction analyses, showing nonplanar structures with the pyridinic rings twisted around the bridging carbon and the ipso carbon bonds. 1 and 3 displayed a bidentate coordination of L to the palladium atom with the formation of six-membered chelate rings, where the local geometry at palladium atom was distorted square planar. In 3 the palladium atom was coordinated to two dipyridyl ligands through two of the pyridinic nitrogen atoms to form a cationic complex stabilized by two tetrafluoroborate counter-ions.     

Mercury(II) complex of inverted N-methylated porphyrin: HgPh(2-NCH3NCTPP)

The reaction of PhHgOAc with 2-NCH₃NCTPPH (2) gave a mercury(II) complex of (phenylato)(2-N-methyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′,N″)-mercury(II), [HgPh(2-NCH₃NCTPP); 7]; the coordination sphere around Hg(1) in 7 was a four-coordinate derivative with a seesaw geometry and dipole–dipole (DD) interaction governed the longitudinal relaxation rate for Hg(1)–Ph–H_2,6 protons of 7 in CDCl₃ (0.01 M) at 599.95 MHz.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.