首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 47 毫秒
1.
高稳定性层柱粘土分子筛的催化性能   总被引:3,自引:1,他引:2  
本文用酸碱滴定和红外光谱等方法对新型多孔材料——高稳定性层柱粘土分子筛(简称AlR)的表面酸性,催化活性和选择性进行了测定和研究,发现AlR的催化特性与HY和U8Y沸石有明显差别。根据实验研究,可以推测,AlR这种新型催化剂材料适用于有效酸强度较弱的大分子酸催化反应。  相似文献   

2.
两种甲醇水蒸气重整制氢催化剂的研究   总被引:1,自引:3,他引:1  
对采用共沉淀法制备的CuZnAlO类铜系催化剂和采用水滑石类层柱材料(LDHs)前驱体制备的催化剂在甲醇水蒸气重整制氢反应中的性能进行了研究。对共沉淀法制备的CuZnAlO类铜系催化剂考察了ZrO2助剂的加入对催化剂反应性能的影响,发现Zr的质量分数为10%的催化剂显著提高CuZnAlO催化剂的反应性能。该催化剂的最佳反应条件:0.1 MPa、250 ℃、H2O/MeOH摩尔比1.0~1.3、3.56 h-1。在此反应条件下进行了COPZr2催化剂150 h稳定性实验。结果表明,该催化剂具有很好的反应稳定性。甲醇转化率和氢产率分别约为88%和83%,产物湿基组成中H2和CO的质量分数分别为>63%和0.20%~0.31%。对LDHs前驱体制备的催化剂,进行了70 h反应稳定性实验,结果表明,催化剂虽具有较高的起始活性,但随反应进行,活性有所下降,30?h后基本保持稳定,甲醇转化率和产氢率分别为73%和66%,产物湿基组成中H2和CO的质量分数分别为>55%和0.07%~0.08%。该类催化剂的反应稳定性虽较差,但却可以显著降低产物湿基组成中CO的摩尔分数。对LDHs前驱体制备的催化剂进行XRD和SEM表征结果表明,ZrO2的加入使催化剂中CuO晶粒分散更为均匀,颗粒更细。  相似文献   

3.
通过高温高压法,利用高压釜装置一步合成Al-交联剂,通过离子交换法制备大比表面积、大孔径的Al柱撑粘土(Al-PILC)。研究了稀土铈改性的Al-PILC负载锰氧化物用于氯苯的催化降解的活性。表征结果表明:柱撑后得到的Al-PILC,其比表面积和孔体积达到182.3m2·g-1和0.121 cm3·g-1,远大于原土的2.81 m2·g-1和0.00786 cm3·g-1。Al-PILC的层间距由原土的1.18增大到1.79 nm。活性数据表明:柱撑改性后的Al-PILC负载锰催化剂的活性远大于Na-mmt的,并且添加稀土Ce有利于改善催化剂的氧化性能,进而提高催化剂的活性。10%Mn-6%Ce/Al-PILC催化剂在330℃左右就能催化降解低浓度的氯苯,无Cl2二次污染产生,并且表现出最佳的稳定性。  相似文献   

4.
以[Mo_2O_4]~(2 )溶液为交联剂制备了钼交联层柱粘土。并用XRD、IR、LRS、XPS及TPD等手段对其结构及Mo的存在状态进行了研究。结果表明:[Mo_2O_4]~(2 )被交换进入了层间,所得层柱粘土的d_(?)~13A,其柱结构为Mo_xO_y的簇状氧化物。当交联剂在粘土层间的量超过粘土的交换容量时,Mo在层外表面偏析。酸性研究显示:Mo的加入使钼交联层柱粘土的酸中心数较之原土增加,并以Lewis酸为主。用异丙醇脱水和氧化反应考察钼交联层柱粘土的催化活性,结果表明,这种层柱粘土不仅具有酸催化活性,同时由于钼的引入而具有氧化活性和抗积炭性能。  相似文献   

5.
本文以Ce(SO4)2进行了酯化反应动力学进行研究,比其它类型催化剂具有较高的催化反应活性,通过Ce4 阳离子进行层间取代增大了层柱粘土催化剂的L酸及B酸位的数量和强度,酯化反应过程中生成的水受到Ce4 的诱导作用,进而造成L酸位向B酸位转换(B酸为主),导致催化剂表面产生较强的B酸酸强度.pH值测定提供了有力支持,结果表明:只有B酸位大于70%,并且在加人层柱粘土催化剂后乙二醇单烷基醚溶液pH值小于1时,在50~150℃的温度范围内才有良好的酯化反应活性和选择性.活性实验表明了层柱粘土催化剂可以重复使用,XRD也表明了新鲜的和重复使用的催化剂组成和晶相一样;同时对反应动力学作用用积分法进行研究,提出了这类反应本质的一般动力学方程.  相似文献   

6.
陶龙骧  邹多秀 《化学进展》2002,14(3):200-206
粘土的可膨胀的二维空间有助于将催化活性的金属络合物阳离子交换法和配位体交换法插入到粘土层间,因而易于制得粘土层间金属络合物催化剂,这是均相催化剂多相化的一种好方法,粘土层间金属络合物催化剂具有分子识别催化作用,择形选择性,立体选择性,区域选择性,本文论述了多种多相化催化剂上的对不对称加氢反尖,区域选择加氢反应,区域选择羰基化反应和空间选择芳基化反应,粘土层间金属络合物催化剂有高的活性和选择性,它可以与匀相金属络合物催化剂相媲美。  相似文献   

7.
在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明,丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性,而且芳构化主要转化为苯;载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度,从而表现出最佳的芳构化性能;随着锌含量的增加,Zn/Al-CLM催化剂的酸量增大,从而使丙烷转化率增大,而选择性则是锌含量质量分数为5.8%时具有极大值;400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用,从而使得Zn/Al-CLM具有较高的芳烃收率。  相似文献   

8.
铝镁柱联粘土的制备及表征   总被引:4,自引:0,他引:4  
以铝镁双金属离子低聚物为交联剂,制备了复合柱联膨润土催化剂(简称为Al-Mg-PILC)。详细考察了Mg/Al比、Al/土比等因素对合成产品性能的影响。借助于XRD、BET、DTA表征手段,结合轻柴油裂解,三甲基苯转化反应,探讨催化剂表面酸性。结果表明,铝镁复合柱直径小于的相应值,所得柱联粘土表面总酸量较少,强酸比例增大。经350℃脱附后,其吡啶吸附量可保持25℃下吸附值的7%左右,而Al-PILC只保留2.5%。进一步证实了交联剂的改进对柱联粘土催化剂性能的影响。  相似文献   

9.
选择性催化还原(SCR)是目前去除氮氧化物最有效的方法之一. V2O5/TiO2催化剂被广泛应用于氨法选择性还原氮氧化物(NH3-SCR)反应,但该催化剂存在工作温度高(300–400oC)及 SO2氧化率高引起设备腐蚀和管路堵塞等问题,开发低温 SCR催化剂具有重要意义.过渡金属氧化物(如 Fe2O3, MnOx和 CuO等)催化剂用于低温SCR先后见诸文献报道,但这些催化剂在 SO2和 H2O存在下易失活.近年来柱撑黏土(PILC)引起科学家广泛关注, Yang等首次将 V2O5/TiO2-PILC催化剂应用于 NH3-SCR反应,发现其催化活性高于传统 V2O5/TiO2催化剂.柱撑黏土基催化剂在 NH3-SCR反应中也显示出良好抗硫性能,但 V2O5/TiO2-PILC催化剂的抗硫机理至今尚未见深入研究.因此我们制备了一系列 V2O5/TiO2-PILC催化剂,采用原位漫反射红外等方法详细研究了其抗硫性能较好的原因.
  首先采用离子交换法制备出 TiO2-PILC载体,之后采用浸渍法制备了不同钒含量(质量分数x/%=0,3,4,5)的xV2O5/TiO2-PILC催化剂.同时,制备了传统 V2O5/TiO2和 V2O5-MoO3/TiO2催化剂作为对比.活性评价结果显示,4V/TiO2-PILC催化剂具有最高的催化活性,其催化性能与传统钒钛催化剂相当.在160oC时, NO转化率可达80%以上.同时,4V/TiO2-PILC催化剂还具有较宽的反应温度窗口,在260–500oC范围内, NO转化率保持在90%以上.向反应体系中加入0.05% SO2和10% H2O后,在低温(160oC以下)时所有催化剂的反应活性都有一定提高,可能是由于 SO2的加入提高了催化剂的表面酸性.继续升高温度,4V/TiO2和4V6Mo/TiO2催化剂活性均明显下降,而4V/TiO2-PILC催化剂的活性则未出现明显下降.原位漫反射红外光谱结果显示, SO2在三种催化剂表面的吸附以表面硫酸盐或亚硫酸盐物种以及离子态 SO42–物种形式存在,而在4V/TiO2-PILC催化剂表面离子态 SO42–物种的量最少. X射线光电子能谱及 O2程序升温脱附结果显示,在4V/TiO2-PILC催化剂上,表面吸附氧(Oads)的量最少.综合上述分析可以得出,在 SO2气氛下,离子态 SO42–物种在 SCR催化剂表面的累积可能是导致其失活的主要原因,而离子态 SO42–物种的形成可能与催化剂表面吸附氧的量有关.  相似文献   

10.
柱撑化合物Zn2Al-PW11Z的结构模型及酯化活性   总被引:1,自引:1,他引:1  
杂多化合物是性能优异的酸型和氧化型或双功能催化剂[1-4],而通式为的阴离子粘土通常具有减催化或还原催化性能[5,6].因此,从在分子及原子水平上设计催化剂,调控催化性能观点出发,人们期望将体积较大的杂多阴离子嵌入阴离子粘土层间,合成大层间距的新型柱撑微孔材料.1988年Pinnavaia等人[7]首次报导了Zn2Al-V10O28是具有2.0nm孔径分布的中微孔材料.最近,笔者将单取代型Keggin结构杂多阴离子GeW11O39Z(H2O)6-(其中Z=Ni2 和Cu2 )和缺位Keggin结构的GeW11O嵌入Zn2Al-NO3层间,合成了通道高度为0.9nm的新型柱撑…  相似文献   

11.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

12.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

13.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

14.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

15.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

16.
17.
An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.  相似文献   

18.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

19.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

20.
Quercetin, the polyphenolic compound, which has the highest daily intake, is well known for its protective effects against aging diseases and has received a lot of attention for this reason. Both quercetin 3-O-β-d-glucuronide and quercetin 3′-O-β-d-glucuronide are human metabolites, which, together with their regioisomers, are required for biological as well as physical chemistry studies. We present here a novel synthetic route based on the sequential and selective protections of the hydroxyl functions of quercetin allowing selective glycosylation, followed by TEMPO-mediated oxidation to the glucuronide. This methodology enabled us to synthesize the five O-β-d-glucosides and four O-β-d-glucuronides of quercetin, including the major human metabolite, quercetin 3-O-β-d-glucuronide.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号