Effect of topological asymmetry on the electrophoretic mobility of branched DNA structures with and without single-base mismatches

The electrophoretic mobility of three-arm star DNA structures with varying degrees of branch length asymmetry has been investigated in polyacrylamide (PAA) hydrogels. We report the effect of single-base mismatches, adjacent to the branch point, on the mobility of branched DNA with three different arm lengths. Branched DNA structures were formed using wild-type and mutated fragments of the p53 tumor suppressor gene, which is believed to play an important role in cancer development. Branching was directed at the site of several previously characterized mutations in exon 7 of p53. At a given gel concentration, the mobility of branched DNA with fully complementary base pairing is found to increase as the degree of branch length asymmetry is increased. Ferguson analysis of the gel electrophoresis data leads to a retardation coefficient that is strongly dependent on topology. This finding can be explained in terms of a minimum molecular cross-section for each molecule. Specifically, we show that structures with the smallest molecular cross-section can access more pores in the gel, which leads to higher mobility. Our results can also be understood by considering the rotational diffusivity of branched DNA. Asymmetric DNA stars with higher calculated rotational diffusivities also have higher mobilities. When a mutated base is present in junctions with low degrees of branch length asymmetry, adjacent to the branch point, the mobility increases in comparison to the fully complementary molecules. The reason for this increased mobility is unclear, here, we propose that the mismatched base introduces additional flexibility to the arm containing the mutation leading to higher conformational freedom and enhanced mobility in gels. When a mismatched base is present in junctions with high degrees of branch length asymmetry, the opposite result is obtained. Here, the mutated species has a lower mobility. This result is argued to arise from incomplete hybridization and/or frayed ends. Finally, we have shown that by using two of the branch point oligonucleotides as probe molecules, mutations known to occur at specific sites can be detected through the mobility shift. If the sequences of the probe chains are changed in a controlled manner, the location and base of the mutant can also be determined.     

Mechanism of sequence-based separation of single-stranded DNA in capillary zone electrophoresis

Separation of DNA by length using CGE is a mature field. Separation of DNA by sequence, in contrast, is a more difficult problem. Existing techniques generally rely upon changes in intrinsic or induced differences in conformation. Previous work in our group showed that sets of ssDNA of the same length differing in sequence by as little as a single base could be separated by CZE using simple buffers at high ionic strength. Here, we explore the basis of the separation using circular dichroism spectroscopy, fluorescence anisotropy, and small angle X-ray scattering. The results reveal sequence-dependent differences among the same length strands, but the trends in the differences are not correlated to the migration order of the strands in the CZE separation. They also indicate that the separation is based on intrinsic differences among the strands that do not change with increasing ionic strength; rather, increasing ionic strength has a greater effect on electroosmotic mobility in the normal direction than on electrophoretic mobility of the strands in the reverse direction. This increases the migration time of the strands in the normal direction, allowing more time for the same-length strands to be teased apart based on very small differences in the intrinsic properties of the strands of different sequence. Regression analysis was used to model the intrinsic differences among DNA strands in order to gain insight into the relationship between mobility and sequence that underlies the separation.     

Determining the electrophoretic mobility and translational diffusion coefficients of DNA molecules in free solution

The free solution mobility of DNA molecules of different molecular weights, the sequence dependence of the mobility, and the diffusion coefficients of small single- and double-stranded DNA (ss- and dsDNA) molecules can be measured accurately by capillary zone electrophoresis, using coated capillaries to minimize the electroosmotic flow (EOF) of the solvent. Very small differences in mobility between various analytes can be quantified if a mobility marker is used to correct for small differences in EOF between successive experiments. Using mobility markers, the molecular weight at which the free solution mobility of dsDNA becomes independent of molecular weight is found to be approximately 170 bp in 40 mM Tris-acetate-EDTA buffer. A DNA fragment containing 170 bp has a contour length of approximately 58 nm, close to the persistence length of DNA under these buffer conditions. Hence, the approach of the free solution mobility of DNA to a plateau value may be associated with the transition from a rod-like to a coil-like conformation in solution. Markers have also been used to determine that the free solution mobilities of ss- and dsDNA oligomers are sequence-dependent. Double-stranded 20-bp oligomers containing runs of three or more adenine residues in a row (A-tracts) migrate somewhat more slowly than 20-mers without A-tracts, suggesting that somewhat larger numbers of counterions are condensed in the ion atmospheres of A-tract DNAs, decreasing their net effective charge. Single-stranded 20-mers with symmetric sequences migrate approximately 1% faster than their double-stranded counterparts, and faster than single-stranded 20-mers containing A(5)- or T(5)-tracts. Interestingly, the average mobility of two complementary single-stranded 20-mers is equal to the mobility of the double-stranded oligomer formed upon annealing. Finally, the stopped migration method has been used to measure the diffusion coefficients of single- and double-stranded oligomers. The diffusion coefficients of ssDNA oligomers containing 20 nucleotides are approximately 50% larger than those of double-stranded DNA oligomers of the same size, reflecting the greater flexibility of ssDNA molecules. The methods used to carry out these experiments are also described in detail.     

Direct tissue analysis of phospholipids in rat brain using MALDI-TOFMS and MALDI-ion mobility-TOFMS

After water, lipids are the most common biomolecules found in the brain (12%). A brief perusal of the physiology, anatomy, and pathophysiology of the brain illustrates the importance of lipids. Recent advances in mass spectrometry have allowed the direct probing of tissues. However, most studies have focused on proteins. In the present work, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) and MALDI-ion mobility (IM)-TOFMS were employed for direct analysis of phospholipids in rat brain tissue. Molecular ions (MH⁺) corresponding to phosphatidylcholines, phosphatidylethanolamines, and sphingomyelin, were recorded. When studying pharmacology, we learn that many therapeutic compounds are stored in the body’s adipose tissue. MALDI-TOFMS and MALDI- IM-TOFMS were thus used to analyze rat brain tissue with chlorisondamine added directly onto the tissue slice. With both techniques, noncovalent complexes between the tissue phospholipids and chlorisondamine were detected. In addition, MALDI-IM-TOFMS of noncovalent complexes between phospholipids and chlorisondamine displayed a mobility between that of an isobaric lipid and peptide.     

Interaction between 14mer DNA oligonucleotide and cationic surfactants of various chain lengths

In the recent genomic era, a novel gene silencing approach has been introduced based on the use of small synthetic oligonucleotides, such as antisense RNAs, siRNAs, to inhibit the expression of a specific target gene. Successful implementation of this methodology calls for the development of efficient systems to deliver small oligonucleotides into the cells using various natural and synthetic cationic agents. While extensive studies have focused on the interaction of various natural and synthetic cationic surfactants with long DNA, less attention has been paid to surfactant interaction with small oligonucleotides. In this study, the interaction between 14mer double stranded DNA and alkyltrimethylammonium bromides of C16 (cetyl, CTAB), C14 (tetradecyl, TTAB), and C12 (dodecyl, DTAB) chain lengths was investigated at different charge ratios by gel electrophoresis, ethidium bromide exclusion, circular dichroism, and UV melting. Our gel studies at 1 microM oligonucleotide concentration showed that CTAB, TTAB, and DTAB neutralize the oligonucleotides at a charge ratio (Z+/-) of 1, 14, and 50, respectively. At lower charge ratios, CTAB and TTAB interact with oligonucleotides, and the complexes show electrophoretic mobility shifts in the gel, while such mobility shifts were completely absent in the case of DTAB. UV melting experiments revealed that interaction with all three surfactants increased the thermostability of the oligonucleotide. The extent of thermal stabilization was highest in the case of CTAB, moderate in the case of TTAB, and extremely low in the case of DTAB. Oligonucleotides within fully neutralized complexes denatured at further higher temperatures, and again, stabilization was the highest in the case of CTAB followed by TTAB and DTAB, hence revealing that the oligonucleotides interacted more strongly with CTAB than with the other two surfactants. Ethidium bromide exclusion studies also supported our UV melting studies, confirming that CTAB binds most strongly to the oligonucleotide. CD titrations of oligonucleotides with increasing amounts of surfactants revealed common spectral patterns consisting of the progressive loss of CD signals for native helical DNA conformations. Overall, our results demonstrate that interaction between oligonucleotides and cationic surfactants, although qualitatively similar to long double stranded DNA, shows subtle differences that need to be understood to improve small oligonucleotide delivery into the cells by using common delivery agents that have been used to deliver long pieces of DNA.     

Metabolic profiling of Escherichia coli by ion mobility-mass spectrometry with MALDI ion source

Comprehensive metabolome analysis using mass spectrometry (MS) often results in a complex mass spectrum and difficult data analysis resulting from the signals of numerous small molecules in the metabolome. In addition, MS alone has difficulty measuring isobars and chiral, conformational and structural isomers. When a matrix-assisted laser desorption ionization (MALDI) source is added, the difficulty and complexity are further increased. Signal interference between analyte signals and matrix ion signals produced by MALDI in the low mass region (<1500 Da) cause detection and/or identification of metabolites difficult by MS alone. However, ion mobility spectrometry (IMS) coupled with MS (IM-MS) provides a rapid analytical tool for measuring subtle structural differences in chemicals. IMS separates gas-phase ions based on their size-to-charge ratio. This study, for the first time, reports the application of MALDI to the measurement of small molecules in a biological matrix by ion mobility-time of flight mass spectrometry (IM-TOFMS) and demonstrates the advantage of ion-signal dispersion in the second dimension. Qualitative comparisons between metabolic profiling of the Escherichia coli metabolome by MALDI-TOFMS, MALDI-IM-TOFMS and electrospray ionization (ESI)-IM-TOFMS are reported. Results demonstrate that mobility separation prior to mass analysis increases peak-capacity through added dimensionality in measurement. Mobility separation also allows detection of metabolites in the matrix-ion dominated low-mass range (m/z < 1500 Da) by separating matrix signals from non-matrix signals in mobility space.     

A nanocarbon film electrode as a platform for exploring DNA methylation

We describe the quantitative nonlabel electrochemical detection of both cytosine (C) and methylcytosine (mC) in oligonucleotides using newly developed nanocarbon film electrodes. The film consists of nanocrystalline sp2 and sp3 mixed bonds formed by employing the electron cyclotron resonance (ECR) sputtering method. We successfully used this film to develop a simple electrochemical DNA methylation analysis technique based on the measurement of the differences between the oxidation currents of C and mC since our ECR nanocarbon film electrode can directly measure all DNA bases more quantitatively than conventional glassy carbon or boron-doped diamond electrodes. The excellent properties of ECR nanocarbon film electrodes result from the fact that they have a wide potential window while maintaining the high electrode activity needed to oxidize oligonucleotides electrochemically. Proof-of-concept experiments were performed with synthetic oligonucleotides including different numbers of C and mC. This film allowed us to perform both C- and mC-positive assays solely by using the electrochemical oxidation of oligonucleotides without bisulfite or labeling processes.     

Sequence‐specific nucleic acid mobility using a reversible block copolymer gel matrix and DNA amphiphiles (lipid‐DNA) in capillary and microfluidic electrophoretic separations

Reversible noncovalent but sequence‐dependent attachment of DNA to gels is shown to allow programmable mobility processing of DNA populations. The covalent attachment of DNA oligomers to polyacrylamide gels using acrydite‐modified oligonucleotides has enabled sequence‐specific mobility assays for DNA in gel electrophoresis: sequences binding to the immobilized DNA are delayed in their migration. Such a system has been used for example to construct complex DNA filters facilitating DNA computations. However, these gels are formed irreversibly and the choice of immobilized sequences is made once off during fabrication. In this work, we demonstrate the reversible self‐assembly of gels combined with amphiphilic DNA molecules, which exhibit hydrophobic hydrocarbon chains attached to the nucleobase. This amphiphilic DNA, which we term lipid‐DNA, is synthesized in advance and is blended into a block copolymer gel to induce sequence‐dependent DNA retention during electrophoresis. Furthermore, we demonstrate and characterize the programmable mobility shift of matching DNA in such reversible gels both in thin films and microchannels using microelectrode arrays. Such sequence selective separation may be employed to select nucleic acid sequences of similar length from a mixture via local electronics, a basic functionality that can be employed in novel electronic chemical cell designs and other DNA information‐processing systems.     

Electrophoretic properties of DNA-modified colloidal gold nanoparticles

Oligonucleotide-modified gold nanoparticles are used in various kinds of colorimetric DNA targeting biosensors and nanoparticle assembly techniques. Herein we focus on how the size of 13 nm gold colloids changes upon DNA modification. We have performed a series of electrophoresis experiments of particles modified both thiol specifically and nonspecifically with single- and double-stranded oligonucleotides of different lengths (12- and 25-mers). Both unmodified and DNA-modified particles migrated at constant velocity in different concentrations of Metaphor agarose gels. Linear Ferguson plots were obtained for all samples, and on the basis of the Ogston model approach, we present how the particle size increases in different amounts depending on the oligonucleotide length, secondary structure, and type of modification (specific or nonspecific). Thiol specifically modified particles obtain a thicker DNA layer since the oligonucleotides are only anchored to the particle in one end and thus stand up from the surface more compared to nonspecifically modified ones, where the oligonucleotides tend to lay more or less flat on the surface with multiple adsorption points. However the thickness of the DNA layer for the thiol specifically modified particles is smaller than the length of a corresponding stretched oligonucleotide, suggesting a flexibility of the thiol-bound strands allowing them to tilt relative to the particle surface.     

Ionic matrices for matrix-assisted laser desorption/ionization time-of-flight detection of DNA oligomers

Salts with low melting points, also termed room-temperature ionic liquids, can be used as matrices in matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF). They have great vacuum stability, and can dissolve polar and apolar solutes including carbohydrates, biological oligomers and proteins. The ionic liquids give much more homogeneous sample solutions compared with solid matrices. We demonstrate the usefulness of using ionic matrices to determine the molecular weight of DNA oligomers by direct TOF mass spectrometric analysis. Three oligonucleotides were tested, (d(pT)(10), d(pC)(11), and d(pC)(12)), with several ionic matrices synthesized from different bases associated to two acids (3-hydroxypicolinic acid and 2,5-dihydroxybenzoic acid). The results obtained show that the best ionic matrices enhance the ion peak intensity of the oligonucleotides with respect to conventional molecular matrices under our experimental conditions. In one case, an ionic matrix provided a signal-to-noise ratio ten times higher than the corresponding molecular matrix. Several of the tested ionic matrices were liquids. However, all working ionic matrices were solids.     

Molecular beacon-metal nanowire interface: effect of probe sequence and surface coverage on sensor performance

We report the effect of surface coverage and sequence on the performance of 5' thiolated, 3' fluorophore-labeled DNA hairpin probes bound to Au/Ag striped ("barcoded") metal nanowires. Coverage was controlled by varying probe concentration, buffer ionic strength, and by addition of short hydroxy-terminated alkanethiol diluent molecules during probe assembly onto the nanowire surface. Surface dilution of the surface-bound probes with a omega-hydroxyl alkanethiol, a commonly accepted practice in the surface-bound DNA literature, did not appreciably improve sensor performance as compared to similar probe coverages without hydroxyalkanethiol diluents; this finding underscores the differences between the molecular beacon probes used here and more traditional nonfluorescent, random coil probes. We found that intermediate probe coverage of approximately 10 (12) molecules/cm (2) gave the best discrimination between presence and absence of a target sequence. Because we are interested in multiplexed assays, we also compared several beacon probe sequences having different stabilities for secondary structure formation in solution; we found that both probe surface coverage and sensor performance varied for different probe sequences. When five different molecular beacon probes, each bound to barcoded nanowires, were used in a multiplexed, wash-free assay for target oligonucleotides corresponding to viral nucleic acid sequences, these differences in probe performance did not prevent accurate target identification. We anticipate that the findings described here will also be relevant to other applications involving molecular beacons or other structured nucleic acid probes immobilized on metal surfaces.     

Designed diblock oligonucleotide for the synthesis of spatially isolated and highly hybridizable functionalization of DNA-gold nanoparticle nanoconjugates

Conjugates of DNA and gold nanoparticles (AuNPs) typically exploit the strong Au-S chemistry to self-assemble thiolated oligonucleotides at AuNPs. However, it remains challenging to precisely control the orientation and conformation of surface-tethered oligonucleotides and finely tune the hybridization ability. We herein report a novel strategy for spatially controlled functionalization of AuNPs with designed diblock oligonucleotides that are free of modifications. We have demonstrated that poly adenine (polyA) can serve as an effective anchoring block for preferential binding with the AuNP surface, and the appended recognition block adopts an upright conformation that favors DNA hybridization. The lateral spacing and surface density of DNA on AuNPs can also be systematically modulated by adjusting the length of the polyA block. Significantly, this diblock oligonucleotide strategy results in DNA-AuNPs nanoconjugates with high and tunable hybridization ability, which form the basis of a rapid plasmonic DNA sensor.     

The potential of electrophoretic mobility shift assays for clinical mutation detection

As the understanding of the links between genetic mutations and diseases continues to grow, there is an increasing need for techniques that can rapidly, inexpensively, and sensitively detect DNA sequence alterations. Typically, such analyses are performed on PCR-amplified gene regions. Automated DNA sequencing by capillary array electrophoresis can be used, but is expensive to apply to large numbers of patient samples and/or large genes, and may not always reveal low-abundance mutations in heterozygous samples. Many different types of genetic differences need to be detected, including single-base substitutions and larger sequence alterations such as insertions, deletions, and inversions. Electrophoretic mobility shift assays seem well suited to this purpose and could be used for the efficient screening of patient samples for sequence alterations, effectively reducing the number of samples that must be subjected to full and careful sequencing. While there is much promise, many of the mobility shift assays presently under development have yet to be demonstrated to have the high sensitivity and specificity of mutation detection required for routine clinical application. Hence, further studies and optimization are required, in particular the application of these methods not only to particular genes but also to large numbers of patient samples in blinded studies aimed at the rigorous determination of sensitivity and specificity. This review examines the state-of-the-art of the most commonly used mobility shift assays for mutation detection, including denaturing gradient gel electrophoresis, TGGE, SSCP, heteroduplex analysis, and denaturing HPLC.     

Reptation-breathing theory of pulsed electrophoresis: dynamic regimes, antiresonance and symmetry breakdown effects

We apply the concepts of tube and reptation to the pulsed electrophoresis of DNA, considering both biased reptation and "breathing" modes (internal modes of the chain). Using suitable preaveraging approximations, analytical expressions are derived which relate displacement in crossed field electrophoresis to molecular weight, field strength, field period, pore size of the gel, and the angle between the field. These expressions provide scaling laws for the change of mobility when one (or more) of the parameters is varied as well as "universal" velocity versus molecular weight versus pulse time curves. These results are quantitatively compared with experiments. At some point which depends on field angle, field strength and chain length, however, we predict a failure of this model due to symmetry breakdown and loss of ergodicity. Qualitatively, this should lead to considerable band spreading and/or splitting of the highest DNA bands into two bands migrating sideways from the diagonal. The case of field inversion is also investigated. It is shown that only breathing modes can explain the strong differences in mobility experienced by chains of different length when opposite fields of equal amplitude are applied: the "trapping" of chains in conformations of low mobility is associated with an antiresonance-like coupling between the external field and the internal modes.     

Insights into high mobility group A (HMGA) proteins from Poaceae family: An in silico approach for studying homologs

High mobility group (HMG) proteins are the major architectural proteins. Among HMG proteins, High Mobility Group A (HMGA) is characterized by AT-hook (ATH) motifs, which have an affinity for AT-rich DNA. In this study, we characterized the plant HMGAs from the Poaceae family using in silico methods. The protein sequences for rice HMGAs were retrieved and the corresponding orthologs from grasses were extracted. The phylogenetic analysis identified three major evolutionary clades of grass HMGAs and their ATH motif analysis revealed that HMGAs from clade 1 and 2, except for clade 2 HMGAs, are devoid of high-affinity DNA-binding domain. The clade 2 HMGAs also displayed a highly conserved length of all the spacers and the length of the C-terminal tail following the last ATH. Moreover, the C-terminal tail in clade 2 HMGAs is smaller than HMGAs from any other clade. Unlike clade 2, other clades of Poaceae HMGAs displayed high variability in the length of spacers. Despite several differences among HMGAs of different clades in Poaceae, the H1/H5 domain was found to be highly conserved. This study has revealed the detailed analyses of Poaceae HMGAs and it will be useful for further investigation aiming at the determination of precise biological functions and molecular mechanisms of grass HMGAs.     

Use of an amino-silica column for the high-performance liquid chromatographic analysis of synthetic oligodeoxy-nucleotides.

The use of an amino-silica column in the chromatographic analysis of synthetic oligodeoxyribonucleotides and their derivatives from different stages of oligonucleotide synthesis has been investigated. By eluting with 0.10 M potassium phosphate solution of pH 3.30, the nucleotide composition of oligonucleotides can be established within 15 min. In a linear gradient of phosphate buffer (0.10-0.75 M) at neutral pH, the separation of oligonucleotides by length and in an acidic medium pH 3.30-4.30) by composition is possible; the oligonucleotides may be in the free form or modified by the various protecting groups used in synthetic oligonucleotide chemistry. The analysis of some reaction mixtures from different stages of oligonucleotide synthesis and of a number of synthetic oligodeoxyribonucleotides and their derivatives has been performed.     

Comparative study of capillary zone electrophoresis and high-performance liquid chromatography in the analysis of oligonucleotides and DNA.

Capillary zone electrophoresis and high-performance liquid chromatography were compared with regard to the separation of oligonucleotides and double-stranded DNA. Both anion-exchange and reversed-phase high-performance liquid chromatography on non-porous particles are considered to be superior to capillary electrophoresis in terms of speed and selectivity in the analysis of oligonucleotides up to 30 bases in length. Moreover, reversed-phase chromatography allows the simultaneous purification of detritylated oligonucleotides with recoveries > 90%. Compared with anion-exchange chromatography, there is no need for a subsequent desaltation step because the volatile buffer system can be readily evaporated. With regard to dsDNA, however, the resolving power of capillary electrophoresis cannot be matched by anion-exchange chromatography at present. Moreover, the combined use of hydroxyethylcellulose and ethidium bromide not only yielded a separation efficiency equal to that achieved by means of gel-filled capillaries but also avoids some of their limitations such as the destruction of the gel matrix at high current densities and the bias involved in electrokinetic injection.     

Binary Assembly of Au Nanoparticles with Controllable Two‐dimensional Architecture Directed by Phosphate Backbone Modified Oligonucleotide

A three complementary strand oligonucleotide system was employed to assemble two different‐sized, 15 and 25 nm, Au nanoparticles into binary two‐dimensional (2D) structures. First, two non‐complementary strands of phosphate backbone modified oligonucleotides (PM oligo‐DNA) were loaded on the surface of the 15 and 25 nm Au nanoparticles, respectively. Upon the addition of the third linker DNA, which was half complementary to each of the modified DNA, the Au nanoparticles would be assembled to binary 2D aggregates. The number of the 15 nm Au nanoparticles around a 25 nm Au naoparticle can be readily controlled by the length of the DNA helix used.     

Complexation of DNA with cationic surfactants as studied by small-angle X-ray scattering

The phase behaviors of the complex formed by didodecyldimethylammonium bromide(DDAB)and cetyltrimethylammonium bromide(CTAB)interacting with three different types of DNAs,salmon testes DNA(~2000 bp),21-bp double-stranded oligonucleotides(oligo-ds DNA),and 21-nt single-stranded oligonucleotides(oligo-ss DNA)were studied by synchrotron small-angle X-ray scattering.It was found that the DNA length and flexibility,together with the positive/negative charge ratio,determined the final structure.At higher charge ratios,the DNA length exhibited negligible effect.Both oligo-ds DNA and salmon DNA formed inverted hexagonal packing of cylinders with CTAB,as well as bilayered lamella with DDAB.However,at lower charge ratios,oligo-ds DNA formed a distorted hexagonal phase with CTAB and a new structure with DDAB,which was different from the behaviors of salmon DNA.The flexible oligo-ss DNA formed rich structures that were subject to environmental disturbance.Kinetic study also indicated that the structures of the complex formed by oligo-ss DNA took much longer to mature than the structures formed by oligo-ds DNA.We attributed this result to the conformational adjustment of oligo-ss DNA in the complex.