Determination of twelve heparin- and heparan sulfate-derived disaccharides as 2-aminoacridone derivatives by capillary zone electrophoresis using ultraviolet and laser-induced fluorescence detection

In quest for high sensitivities, we developed an ultrahigh capillary electrophoresis (CE) method for the structural analysis of heparin and heparan sulfate (HS) in biologic samples. Heparin and HS were digested with an equi-unit mixture of heparin lyases I, II and III and the obtained Delta-disaccharides were derivatized with the fluorophore 2-aminoacridone. All known twelve non-, mono-, di- and trisulfated Delta-disaccharides were completely resolved in a single run, using 50 mM phosphate buffer, pH 3.5, and reversed polarity at 30 kV. Relative standard deviation in migration times and peak areas as well as day-to-day variance ranged from 0.9 to 2.4%, suggesting a reproducible and precise method. Detection of 2-aminoacridone (AMAC)-derivatives of Delta-disaccharides by UV at 255 nm showed 2.8 and 10 times higher sensitivity than that of derivatized and non-derivatized ones at 232 nm. Laser-induced fluorescence detection with an Ar-ion laser source showed an approximately 100 times higher sensitivity than that obtained at 232 nm of the non-derivatized species. Application of this method to quantitative analysis of Delta-disaccharides derived from porcine intestinal mucosa heparin and bovine kidney HS showed excellent agreement with previously published methods, suggesting an accurate method. The developed method can be easily applied for the disaccharide analysis of heparin/HS at the attomole level with high accuracy, for distinguishing between heparin and HS and may be of value for studying their interactions with matrix effective molecules.     

Improved workup for glycosaminoglycan disaccharide analysis using CE with LIF detection

This work describes improved workup and instrumental conditions to enable robust, sensitive glycosaminoglycan (GAG) disaccharide analysis from complex biological samples. In the process of applying CE with LIF to GAG disaccharide analysis in biological samples, we have made improvements to existing methods. These include (i) optimization of reductive amination conditions, (ii) improvement in sensitivity through the use of a cellulose cleanup procedure for the derivatization, and (iii) optimization of separation conditions for robustness and reproducibility. The improved method enables analysis of disaccharide quantities as low as 1 pmol prior to derivatization. Biological GAG samples were exhaustively digested using lyase enzymes, the disaccharide products and standards were derivatized with the fluorophore 2‐aminoacridone and subjected to reversed polarity CE‐LIF detection. These conditions resolved all known chondroitin sulfate (CS) disaccharides or 11 of 12 standard heparin/heparan sulfate disaccharides, using 50 mM phosphate buffer, pH 3.5, and reversed polarity at 30 kV with 0.3 psi pressure. Relative standard deviation in migration times of CS ranged from 0.1 to 2.0% over 60 days, and the relative standard deviations of peak areas were less than 3.2%, suggesting that the method is reproducible and precise. The CS disaccharide compositions are similar to those obtained by our group using tandem MS. The reversed polarity CE‐LIF disaccharide analysis protocol yields baseline resolution and quantification of heparin/heparan sulfate and CS/dermatan sulfate disaccharides from both standard preparations and biologically relevant proteoglycan samples. The improved CE‐LIF method enables disaccharide quantification of biologically relevant proteoglycans from small samples of intact tissue.     

Quantitative determination of the glycosaminoglycan Delta-disaccharide composition of serum, platelets and granulocytes by reversed-phase high-performance liquid chromatography

Seven Delta-disaccharide standards from heparan sulfate/heparin (HS/H) and nine Delta-disaccharide standards from chondroitin/dermatan sulfate (CS/DS) and hyaluronic acid (HA) were derivatized with the fluorophore 2-aminoacridone (AMAC) and separated in two runs each by reversed-phase HPLC with baseline separation and very short run times. This novel method facilitates the separation of the largest number of Delta-disaccharides from both CS/DS/HA and HS/H with one column and buffer system after fluorophore labeling in two runs at present. For the first time nine glycosaminoglycan (GAG) Delta-disaccharides from CS/DS/HA were separated after fluorophore labeling in one run. The limits of quantification (LOQs) were below 0.2 pmol for CS/DS/HA and HS/H Delta-disaccharides. We demonstrated applicability of our method for biological samples. Furthermore, normal ranges of the GAG Delta-disaccharide compositions from platelets and granulocytes were determined for the first time.     

High sensitivity separation and detection of heparan sulfate disaccharides

Eight Delta-disaccharide standards from heparan sulfate/heparin were derivatized with the fluorophore 4,4-difluoro-5,7- dimethyl-4-bora-3a,4a-diaza-s-indacene-3-propionic acid, hydrazide (BODIPY) via formation of a Schiff's base and separated using HPAEC on a Propac PA1 column with a linear salt gradient and isocratic 150 mM NaOH. Detection was with an in-line fluorescence detector. The standard deviation (sigma(n-1)) in retention times were 0.7-2% over nine runs. The limit of detection, was 100 fmol (100 x 10(-15)mol) of BODIPY labeled Delta-disaccharides, representing considerably improved detection compared to other fluorophore labeled derivatives and, unlike these, required no further purification steps. Separation and improved detection of BODIPY-Delta-disaccharide conjugates will assist the structural analysis of HS and the development of improved sequencing methodologies.     

Quantification of γ-aminobutyric acid in the heads of houseflies (Musca domestica) and diamondback moths (Plutella xylostella (L.)), using capillary electrophoresis with laser-induced fluorescence detection

A novel method was developed for quantifying the levels of γ‐aminobutyric acid (GABA) in the heads of houseflies (Musca domestica) and diamondback moths (Plutella xylostella (L.)), using capillary electrophoresis with laser‐induced fluorescence detection (CE‐LIF). The GABA in sample was derivatized with 4‐chloro‐7‐nitro‐2,1,3‐benzoxadiazole (NBD‐Cl) prior to CE‐LIF analysis. In total, 32 mmol/L borate buffer, at pH 9.2 and containing 5.3 mmol/L β‐cyclodextrin (β‐CD) and 10.4 mmol/L sodium dodecyl sulfate (SDS), was determined to be the optimum CE background electrolyte (BGE) for GABA analysis. The detection limit of GABA was 0.016 μmol/L. The relative standard deviations (RSDs) of the migration time and peak area of GABA were 1.78 and 4.93%, respectively. The average recoveries of 0.97, 3.88, and 5.83 μmol/L of GABA, each added to the head sample of housefly, ranged from 88.9 to 110.5%. This method is simple and applicable to GABA assays of the heads of insects. With this newly developed CE‐LIF method, the amounts of GABA in the heads of houseflies (M. domestica) and diamondback moths (P. xylostella (L.)) were measured. The results are relevant to the understandings of some insecticides and insecticide‐resistance mechanisms in pests.     

A novel LIF-CE method for the separation of hyaluronan- and chondroitin sulfate-derived disaccharides: Application to structural and quantitative analyses of human plasma low- and high-charged chondroitin sulfate isomers

The report describes a rapid and simple CE method using LIF detection for the analysis of unsaturated disaccharides obtained from enzymatic depolymerization of plasma chondroitin sulfate (CS) isomers. The disaccharide reducing groups were labeled with 2-aminoacridone (AMAC). The fluorotagged products can be separated by reversed-polarity CE using a sodium acetate buffer, pH 3.8, in the presence of 0.05% methylcellulose. The choice of the appropriate electrophoretic conditions was performed after a deep analysis of the most important parameters affecting analyte separation. In particular, the effect of both run buffer concentration and pH on resolution, efficiency, migration times, and peak area was evaluated. The selected electrophoretic conditions allowed us to separate the CS isomers-derived Delta-disaccharides in less than 12 min, also resolving the nonsulfated disaccharides released from CS isomers from those released from hyaluronan (HA). Moreover, these conditions gave a good reproducibility of both the migration times (CV%, 0.25) and the peak areas (CV%, 1.4). Intra- and interassay CV were 5.37 and 7.23%, respectively, and analytical recovery was about 86%. The applicability of the above method to the quantitative and structural disaccharide analyses of plasma CS isomers was investigated. Data obtained from 44 healthy human subjects were compared with those obtained by a fluorophore-assisted carbohydrate electrophoresis (FACE) reference assay, by using the Passing and Bablok regression and Bland-Altman tests. The developed method could represent a good tool for an ultrasensitive analysis of CS isomers in biological samples from different sources, particularly when samples are available in very low amounts.     

Capillary electrophoresis and enzyme solid phase assay for examining the purity of a synthetic heparin proteoglycan-like conjugate and identifying binding to basic fibroblast growth factor

Interaction of basic fibroblast growth factor (bFGF) with heparin/heparan sulfate proteoglycans protects the growth factor against proteolytic degradation and is essential for its cellular activity. Although the structural requirements of heparin and heparan sulfate for the high-affinity binding to bFGF have been extensively examined, studies on intact heparin proteoglycans are limited. In this report, the purity and the binding ability of a heparin proteoglycan-like molecule-the heparin-bovine serum albumin (heparin-BSA) conjugate-was examined using capillary zone electrophoresis (CZE). Furthermore, the affinity of bFGF binding to the heparin-BSA conjugate was studied using an enzyme solid-phase assay. Chondroitin sulfate, dermatan sulfate, hyaluronan, heparan sulfate and variously sulfated disaccharides derived from heparin and heparan sulfate were also studied for their ability to compete with the binding of bFGF to heparin. Heparin-BSA conjugate was synthesized by reductive amination and, following precipitation with 1.5 vols of ethanol-sodium acetate, it was obtained free of contaminating heparin. Heparin-BSA-bFGF conjugate was obtained following incubation of heparin-BSA with bFGF for 2 h at 37 degrees C. Intact heparin, heparin-BSA and heparin-BSA-bFGF conjugates were completely resolved by CZE using 50 mM phosphate, pH 3.5, as operating buffer, reversed polarity (30 kV) and detection at 232 nm. Competitive solid phase assay showed that, among the glycosaminoglycans tested, heparin exhibits the highest affinity binding to bFGF (IC(50) = 6.4 nM). Heparan sulfate showed a lower affinity as compared with that of heparin, whereas all other glycosaminoglycans and heparin/heparan sulfate-derived disaccharides tested showed minute effects. The developed CZE method is rapid and accurate and can be easily used to identify bFGF-interacting heparin preparations of biopharmaceutical importance.     

Capillary electrophoresis coupled with in‐column fiber‐optic laser‐induced fluorescence detection for the rapid separation of neodymium

In this study, in‐column fiber‐optic (ICFO) laser‐induced fluorescence (LIF) detection technique is coupled with capillary electrophoresis (CE) for the rapid separation of neodymium for the first time. The effects of buffer concentration, buffer pH, and separation voltage on the CE behaviors, including electrophoretic efficiency and detection sensitivity, are investigated in detail. Under the optimal condition determined in this study (15 mM borate buffer, pH 10.50, separation voltage 24 kV), neodymium could be separated effectively from the neighboring lanthanides (praseodymium and samarium) within several minutes, and the limit of detection for neodymium is estimated to be at the ppt level. The ICFO‐LIF‐CE system assembled in this study exhibits unique performance characteristics such as low cost and flexibility. Meanwhile, the separation efficiency and detection sensitivity of the assembled CE system are comparable to or somewhat better than those obtained in the previous traditional CE systems, indicating the potential of the assembled CE system for practical applications in the fields of spent nuclear fuel analysis, nuclear waste disposal/treatment, and nuclear forensics.     

Improving detection in capillary electrophoresis with laser induced fluorescence via a bubble cell capillary and laser power adjustment

Bubble cells have been frequently employed in capillary electrophoresis (CE) to increase the light path length with UV detection to provide an increase in the observed sensitivity of CE; however this approach has not been commonly used for laser-induced fluorescence detection (LIF) with CE. In this paper we study the influence of laser power on the sensitivity of detection in using conventional and enlarged fused silica capillaries for CE with LIF. When using the bubble cell capillary, the laser power must be decreased relative to use of the conventional capillary to reduce the effects of photodegradation of the species being illuminated by the laser. Even though the light intensity was decreased, an increase in sensitivity of detection was observed for most compounds when a bubble cell was used. This increase ranged from a factor of 8 for riboflavin (410 nm excitation) to 3.2 for most aromatic compounds (266 nm excitation), when using a 3x bubble cell compared with a conventional capillary. The bubble cell capillary was used for native detection of IgG by LIF at 266 nm. A limit of detection of 60 ng mL(-1) was obtained from a 20 pg injection, which was 40 times more sensitive than silver staining in conventional SDS/PAGE.     

Determination of genomic N3‐methylthymidine in human cancer cells treated with nitrosamines using capillary electrophoresis with laser‐induced fluorescence

Methylating substances alter DNA by forming N3‐methylthymidine (N3mT), a mutagenic base modification. To develop a sensitive analytical method for the detection of N3mT in DNA based on capillary electrophoresis with laser‐induced fluorescence detection (CE‐LIF), we synthesized the N3mT‐3’‐phosphate as a chemical standard. The limit of detection was 1.9 amol of N3mT, which corresponds to one molecule of N3mT per 1000 normal nucleotides or 0.1%. With this method, we demonstrated that the carcinogenic nitrosamine N’‐nitrosonornicotine (NNN) induced N3mT in the human lung cancer cell line A549. Treatment with NNN also caused an elevated degree of 5‐hydroxymethylcytidine (5hmdC) in DNA, while the methylation degree (i.e. 5‐methylcytidine; 5mdC) stayed constant. According to our data, NNN could, via yet unknown mechanisms, play a role in the formation of N3mT as well as 5hmdC. In this study we have developed a new sensitive analytical method using CE‐LIF for the simultaneous detection of the three DNA modifications, 5mdC, 5hmdC and N3mT.     

Studying protein-drug interaction by microfluidic chip affinity capillary electrophoresis with indirect laser-induced fluorescence detection

We developed a microfluidic chip-affinity CE method based on indirect LIF detection to study protein-drug interactions. The interaction between heparin and BSA was quantitatively studied, as a model system. In our method, sodium fluorescein was chosen as background, and redistilled water as marker to monitor EOF. The electrophoretic mobility changes of BSA were measured, with various concentrations of heparin added to the running buffer. Each run was completed within 80 s. The binding constant was determined to be (1.24 +/- 0.05) x 10(3) M(-1), which was in good agreement with that reported in the literature.     

Capillary electrophoresis for simultaneous analysis of heparin, chondroitin sulfate and hyaluronic acid and its application in preparations and synovial fluid

A simple and accurate capillary electrophoresis (CE) method was developed to simultaneously separate and quantify heparin, chondroitin sulfate and hyaluronic acid. The relative standard deviations (intra-day) of migration time, peak height and peak area for heparin, chondroitin sulfate and hyaluronic acid were lower than 1.11, 5.45 and 2.82%, respectively. The limits of detection of heparin, chondroitin sulfate and hyaluronic acid were 0.91, 0.12 and 9.04 × 10(-3) mg/mL, respectively. The developed electrophoretic method was successfully applied to the analysis of commercial drug products and biological samples containing chondroitin sulfate and/or hyaluronic acid. The recoveries for chondroitin sulfate and hyaluronic acid were in the range of 95.9 ~107.0%. This was the first time the content of hyaluronic acid in the synovial fluids from osteoarthritic rabbits was investigated by CE. The results suggested that hyaluronic acid in the synovial fluids from osteoarthritic rabbits may be further metabolized and the administration of chondroitin sulfate or hyaluronic acid could affect the content and metabolism of hyaluronic acid in the synovial fluids. The developed CE method was simple to implement without sample pretreatment such as depolymerisation, very repeatable and easily transferred from lab to lab.     

A high‐sensitivity LIF detector with silver mirror coating detection window and small‐angle optical deflection from collinear system for CE

An LIF detector was integrated into a CE system based on silver mirror coating detection window and small‐angle optical deflection from collinear configuration. For this detection scheme, the incident light beam was focused on capillary through the edge of a lens, resulting in a small deflection angle that deviated 18° from the collinear configuration. Meanwhile, the excitation light and emitted fluorescence were effectively reflected by silver mirror coating at the detection window. The fluorescence was collected through the center of the same lens and delivered to a PMT in the vertical direction. In contrast to conventional collinear LIF detection systems, the fluorescence intensity was greatly enhanced and the background level was significantly eliminated. FITC and FITC‐labeled amino acids were used as model analytes to evaluate the performance with respect to design factors of this system. The limit LOD was estimated to be 0.5 pM for FITC (S/N = 3), which is comparable to that of optimized confocal LIF systems. All the results indicate that the proposed detection scheme will be promising for development of sensitive and low‐cost CE system.     

On-column detection of multiphoton-excited fluorescence in CE using hyphenated cylindrical-square capillaries

Multiphoton-excited fluorescence (MPEF) is a complementary and useful mode of LIF detection in CE with advantages of ultra-low mass detectability and spectral excitability, but it is currently quite limited by its end-column configuration. In this article, we demonstrate a novel strategy of on-column schemes that can greatly facilitate MPEF detection in CE. FITC-labeled amine species were used as the model samples for the evaluation and comparison of those detection scenarios. By using the square capillary instead of the conventional cylindrical one, the on-column MPEF could be readily achieved, with detection sensitivity of 0.72 microM that was comparable with the end-column mode. However, this strategy unfavorably reduced separation efficiency. The theoretical plate number on averaging all the sample peaks was significantly decreased from 283,000 to 19,000/m. To minimize such an influence, a short square capillary acting as an on-column MPEF detection cell was then mounted to a long cylindrical capillary responsible for the CE separation. Results indicated that both high separation efficiency (240,000/m) and better detectability (0.42 microM) were realized simultaneously by using this binary-capillary configuration. Quantitative analysis was performed under the optimized detector configuration and revealed a linear dynamic range of 2 orders of magnitude, with mass detection limit down to the mid-yottomole level.     

Capillary electrophoresis‐laser‐induced fluorescence detection of rat brain catecholamines with microwave‐assisted derivatization

In this study, a rapid and sensitive method is described for the catecholamines detection in rat brain. CE with LIF detection for the determination of FITC derivatized catecholamines (dopamine, epinephrine, and norepinephrine) was demonstrated. Conventional water bath and microwave‐assisted derivatization methods were employed and a significant reduction in the derivatization time from 2 h for the conventional water bath at room temperature (ca. 25°C) to 2 min for the microwave‐assisted derivatization was achieved. Online sample concentration of field‐amplified sample stacking (FASS) method was employed to achieve higher sensitivities (the detection limits obtained in the normal injection mode ranged from 2.6 to 4.5 ng L^?1 and in the FASS mode ranged from 22 to 34 pg L^?1). Furthermore, this microwave‐assisted derivatization CE–LIF method successfully determined catecholamines in rat brain with as low as 100 ng L^?1 (FASS mode) to 10 μg L^?1 (normal injection mode). This CE–LIF method provided better detection ability when compared to the best reports on catecholamines analyses.     

Rapid and sensitive determination of free thiols by capillary zone electrophoresis with near‐infrared laser‐induced fluorescence detection using a new BODIPY‐based probe as labeling reagent

A CZE with near‐infrared (NIR) LIF detection method has been developed for the analysis of six low molecular weight thiols including glutathione, homocysteine, cysteine, γ‐glutamylcysteine, cysteinylglycine, and N‐acetylcysteine. For this purpose, a new NIR fluorescent probe, 1,7‐dimethyl‐3,5‐distyryl‐8‐phenyl‐(4'‐iodoacetamido)difluoroboradiaza‐s‐indacene was utilized as the labeling reagent, whose excitation wavelength matches the commercially available NIR laser line of 635 nm. The optimum procedure included a derivatization step of the free thiols at 45°C for 25 min and CZE analysis conducted within 14 min in the running buffer containing 16 mmol/L pH 7.0 sodium citrate and 60% v/v ACN. The LODs (S/N = 3) ranged from 0.11 nmol/L for N‐acetylcysteine to 0.31 nmol/L for γ‐glutamylcysteine, which are better than or comparable to those reported with other derivatization‐based CE‐LIF methods. As the first trial of NIR CE‐LIF method for thiol determination, the practical application of the proposed method has been validated by detecting thiols in cucumber and tomato samples with recoveries of 96.5–104.3%.     

Laser‐Induced Fluorometry for Capillary Electrophoresis

Laser‐induced fluorometry (LIF) has achieved the detection of single molecules, which ranks it among the most sensitive of detection techniques, whereas capillary electrophoresis (CE) is known as a powerful separation method with resolution that is beyond the reach of many other types of chromatography. Therefore, a coupling of LIF with CE has established an unrivaled analytical technique in terms of sensitivity and resolution. CE‐LIF has demonstrated excellent performance in bioanalytical chemistry for the high‐resolution separation and highly sensitive detection of DNAs, proteins, and small bioactive molecules. This review describes the CE‐LIF methods developed by the author's group that include indirect and direct detection using diode lasers, post‐column derivatization, and Hadamard transformation, as well as applications to the binding assays of specific DNA immunoassays of proteins and to the determination of anticancer drugs.     

Determination of different forms of human interferon-gamma in single natural killer cells by capillary electrophoresis with on-capillary immunoreaction and laser-induced fluorescence detection

A novel method for determining different forms of human interferon-gamma (IFN-gamma) in single natural killer cells was developed by capillary electrophoresis (CE) with on-capillary immunoreaction and laser-induced fluorescence (LIF) detection. Cells were perforated with digitonin and one single cell was electrokinatically introduced into the front end of a separation capillary. The monoclonal antibody labeled with fluorescein isothiocyanate of IFN-gamma was hydrodynamically injected into the front end of the capillary around the cell introduced. After the cell was lysed by ultrasonication, the front end of the capillary was used as a microreactor to allow different forms of IFN-gamma to process the immunoreaction with their labeled antibody. Finally, the complexes of different forms of IFN-gamma with their labeled antibody were separated and detected by CE with LIF detection with a limit of detection of zeptomoles (10(-21) mol).     

Nonaqueous capillary electrophoresis coupled with laser-induced native fluorescence detection for the analysis of berberine, palmatine, and jatrorrhizine in Chinese herbal medicines

LIF detection is one of the most sensitive detection methods for CE. However, its application is limited because the analyte is usually required to be derivatized with a fluorescent label. As a result, LIF is seldom used to analyze active ingredients in plants. In this work, we introduce a rapid, simple, and sensitive method of nonaqueous CE (NACE) coupled with laser-induced native fluorescence detection for the simultaneous analysis of berberine, palmatine, and jatrorrhizine. This method skillfully utilizes the native fluorescence of these alkaloids and requires no troublesome fluorescent derivatization. As these alkaloids can fluoresce to some degree, they were simply detected by a commercially available 488 nm Ar+ laser. The native fluorescence of the analytes was greatly enhanced by nonaqueous media. Compared with the reported UV detection method, much lower LOD was achieved (6.0 ng/mL for berberine, 7.5 ng/mL for palmatine, and 380 ng/mL for jatrorrhizine). This method was successfully applied to analyze berberine, palmatine, and jatrorrhizine in two Chinese herbal medicines, Rhizoma coptidis and Caulis mahoniae.     

Synthesis of fluorescently labeled alkylated DNA adduct standards and separation by capillary electrophoresis

DNA adducts are regarded as individual internal dosimeters for the exposure to chemical carcinogens. To date, the most sensitive method for DNA adduct analysis is the radioactive 32P-postlabeling method, which allows the detection of one adduct in 10(10) unmodified nucleotides in microg amounts of DNA. However, this technique suffers from disadvantages such as working with radioactive phosphorus and time-consuming chromatographic separation procedures. In addition, the simultaneous detection of adducts from different classes of carcinogens in a DNA sample is difficult. In order to overcome these drawbacks, we are developing a new detection method, comprising fluorescence labeling of DNA adducts, capillary electrophoretic (CE) separation, and on-line detection by monitoring laser-induced fluorescence (LIF). So far, we have evaluated the separation power and the detection limit of CE with fluorescently labeled standard compounds such as unmodified nucleotides or alkylated thymidines. For this purpose, we developed a universal method for labeling 5'-OH-mononucleosid-3'-dicyanoethyl-phosphates with fluorescent dyes based on the phosphoramidite technology for DNA synthesis. The separation of N3-methylated, N3-, O2- and O4-butylated thymidines from the unmodified nucleotide within a few minutes recommends CE-LIF as a powerful method for DNA adduct analysis.