Development of the DET technique for high-resolution determination of soluble reactive phosphate profiles in sediment pore waters

The DET (diffusive equilibrium in thin films) technique is developed to measure soluble reactive phosphate (SRP) profiles in sediment pore waters at a millimetre resolution. The analytical procedure includes equilibration of the gels in sediments, section of the gels after retrieval from the sediments, back elution of phosphorus in the gels, and analysis of SRP in the eluents. Recovery of phosphorus is improved from back elution with 0.25?M nitric acid relative to deionised water. SRP concentrations in pore waters of different sediments measured by DET probes agree well with those directly measured by the colorimetric method. Pore water profiles obtained simultaneously using gel probes and other techniques (including Rhizon and dialysis peeper) also show comparability at similar resolutions. The DET probes were used to investigate pore water SRP profiles in the sediments of two contrasting regions (algal-dominated and macrophyte-dominated) in Lake Taihu. An increasingly upward movement of SRP was observed in subsurface pore waters of the algal-dominated region coupled with an increase in water temperature from March to May. Peak-shape distribution of SRP and horizontal heterogeneity was observed in pore waters of the macrophyte-dominated region, which is most likely caused by the activity of submerged macrophyte roots.     

Extraction procedures for the determination of heavy metals in contaminated soil and sediment

Extraction tests are commonly used to study the mobility of metals in soils and sediments by mimicking different environmental conditions or dramatic changes on them. The results obtained by determining the extractable elements are dependent on the extraction procedure applied. The paper summarises state of the art extraction procedures used for heavy metal determination in contaminated soil and sediments. Two types of extraction are considered: single and sequential. Special attention is paid to the Standard, Measurement and Testing projects from the European Commission which focused on the harmonisation of the extraction procedures and on preparing soil and sediment certified reference materials for extractable heavy metal contents.     

Development of a polypyrrole-based amperometric detector for the determination of certain anions in water samples

The development of a polypyrrole-based modified electrode for use in the detection of anions in flow-injection analysis and ion chromatography is described. Chloride, nitrate, nitrite, perchlorate, bromide, carbonate, sulphate and phosphate were detected by using flow-injection analysis combined with the polypyrrole-based CME electrochemical detector. All of the anions were detected conveniently and reproducibly over a linear concentration range 1-100 mug/ml. A detection limit of 0.1 mug/ml was obtained for chloride and a limit of 1.0 mug/ml for all of the other anions. Chloride, nitrate, sulphate and phosphate, following separation using ion chromatography, were detected simultaneously by using a conductivity detector and the polypyrrole-based CME electrochemical detector in series. Both methods of detection yielded similar results with comparable sensitivity, linearity and limits of detection. This method was then applied to the analysis of fresh water samples. The electrode was stable over a 2-week period of operation with no evidence of chemical or mechanical deterioration.     

Multi-use NBD-based tetra-amino macrocycle: fluorescent probe for metals and anions and live cell marker

Ligand L (4-(7-nitrobenzo[1,2,5]oxadiazole-4-yl)-1,7-dimethyl-1,4,7,10-tetra-azacyclododecane) is a versatile fluorescent sensor useful for Cu(II), Zn(II) and Cd(II) metal detection, as a building block of fluorescent metallo-receptor for halide detection, and as an organelle marker inside live cells. Ligand L undergoes a chelation-enhanced fluorescence (CHEF) effect upon metal coordination in acetonitrile solution. In all three complexes investigated the metal cation is coordinatively unsaturated; thus, it can bind secondary ligands as anionic species. The crystal structure of [ZnLCl](ClO(4)) is discussed. Cu(II) and Zn(II) complexes are quenched upon halide interaction, whereas the [CdL](2+) species behaves as an OFF-ON sensor for halide anions in acetonitrile solution. The mechanism of the fluorescence response in the presence of the anion depends on the nature of the metal ion employed and has been studied by spectroscopic methods, such as NMR spectroscopy, UV/Vis and fluorescence techniques and by computational methods. Subcellular localization experiments performed on HeLa cells show that L mainly localizes in spot-like structures in a polarized portion of the cytosol that is occupied by the Golgi apparatus to give a green fluorescence signal.     

An enzymatic flow analysis method for the determination of phosphatidylcholine in sediment pore waters and extracts

A sensitive and selective flow injection method for the determination of phosphatidylcholine (PC) in sediment pore waters and extracts is described. It involves the use of phospholipase C, alkaline phosphatase and choline oxidase co-immobilized on controlled pore glass in a packed column reactor. The final product of the enzymatic reaction of phosphatidylcholine is hydrogen peroxide, and this is detected by measuring the chemiluminescence emission resulting from cobalt(II) catalysed reaction with luminol. The flow injection method is rapid (30 injections/h), reproducible (1.4% R.S.D. at 3 μM PC, n = 10) with a detection limit of 0.14 μM (estimated from 3σ_n−1 of the measured blank). A linear calibration response was obtained over a concentration range of 0.5-9 μM (r = 0.999). The method has been applied to the determination of phosphatidylcholine in sediment extracts and sediment pore waters.     

Monitoring of bentonite pore water with a probe based on solid-state microsensors

Repositories for the disposal of radioactive waste generally rely on a multi-barrier system to isolate the waste from the biosphere. This multi-barrier system typically comprises the natural geological barrier provided by the repository host rock and its surroundings and an engineered barrier system (EBS). Bentonite is being studied as an appropriated porous material for an EBS to prevent or delay the release and transport of radionuclides towards biosphere. The study of pore water chemistry within bentonite barriers will permit to understand the transport phenomena of radionuclides and obtain a database of the bentonite-water interaction processes. In this work, the measurement of some chemical parameters in bentonite pore water using solid-state microsensors is proposed. Those sensors are well suited for this application since in situ measurements are feasible and they are robust enough for the long periods of time that monitoring is needed in an EBS. A probe containing an ISFET (ion sensitive field effect transistor) for measuring pH, and platinum microelectrodes for measuring conductivity and redox potential was developed, together with the required instrumentation, to study the chemical changes in a test cell with compacted bentonite. Response features of the sensors’ probe and instrumentation performance in synthetic samples with compositions similar to those present in bentonite barriers are reported. Measurements of sensors stability in a test cell are also presented.     

Length-of-stain indicator tubes for the determination of metals in water and solutions

 Indicator tubes have been proposed for the determination of heavy metals in solutions. Preparation procedures for indicator powders based on noncovalent modifications of reversed-phased silica gel sorbents by analytical reagents have been developed. The effects of pH of the sample, the capacity of the sorbent on the reagent, the flow rate, and the diameter of an indicator tube on the length of the colored zone have been studied. Procedures for the determination of Co(II), Fe(II, III), Cu(II), Cd, and the total content of heavy metals in water and solutions have been elaborated. The procedures have been used to analyze natural and waste waters, soil extracts, and industrial solutions. Received: 11 October 1995 / Revised: 7 June 1996 / Accepted: 12 July 1996     

Light transmission study for determination of pore size distribution in microporous membranes

A new method combining light transmission and bubble pressure has been tried to determine the pore size distribution of microporous membranes. The method is based on a simple phenomenon that the light transmitivity through an opaque porous membrane increases as its pores are filled with a transparent liquid. The pore size distributions of Durapore HVHP and Sartorius PTFE membranes were tested using the new method and the results were compared with those obtained by the fluid displacement and the mercury intrusion methods.     

Ion Chromatographic determination of trace anions and cations in high-purity water

An ion chromatographic measuring system for the off-line and on-line determination of some trace anions and cations in high-purity water is presented. The ng/L level of anions and cations in 20–130 mL high-purity water can be analyzed after preconcentration on ion exchange columns. The concentrated solutes are eluted by eluents from the trap column and separated using a Dionex analytical column. The quantification of each ion is achieved using the suppressor technique and conductivity detector. The influence of various parameters on the results is discussed. The detection limits of cations and anions are between 10 and 30 ng/L for chloride, bromide, nitrate, phosphate, sulphate, sodium, ammonium, potassium, magnesium and calcium ions.     

Capillary ion electrophoresis, an environmental method for the determination of anions in water

Capillary ion electrophoresis has recently been introduced as a new separations technique for the analysis of of inorganic anions. Among its many attributes are rapid, highly efficient separations with different selectives (compared to ion chromatography), simplicity, and economy.

This paper demonstrates the ability of capillary ion electrophoresis to analyze primary and secondary anionic contaminants as well as other ions of environmental concern in drinking water, groundwater, and wastewater. Analysis time is less than five minutes. A comparison of the data to ion chromatography shows excellent correlation.     

Ion Chromatographic determination of trace anions and cations in high-purity water

An ion chromatographic measuring system for the off-line and on-line determination of some trace anions and cations in high-purity water is presented. The ng/L level of anions and cations in 20-130 mL high-purity water can be analyzed after preconcentration on ion exchange columns. The concentrated solutes are eluted by eluents from the trap column and separated using a Dionex analytical column. The quantification of each ion is achieved using the suppressor technique and conductivity detector. The influence of various parameters on the results is discussed. The detection limits of cations and anions are between 10 and 30 ng/L for chloride, bromide, nitrate, phosphate, sulphate, sodium, ammonium, potassium, magnesium and calcium ions.     

Use of solid-phase extraction in various of its modalities for sample preparation in the determination of estrogens and progestogens in sediment and water.

The environmental analysis of estrogens and progestogens at physiologically active concentrations (low ng/l range) requires the use of very sensitive and selective methods, which, in most cases, make necessary an extraction/purification step. In this study, various procedures for the determination of several estrogens (estriol, estradiol, ethynyl estradiol, estrone, and diethylstilbestrol) and progestogens (progesterone, norethindrone, and levonorgestrel) in environmental matrices, including water and river sediment, are described. In all procedures, final analysis of the target compounds is performed by reversed-phase liquid chromatography-diode array detection-mass spectrometry, whereas sample preparation always includes a solid-phase extraction (SPE) step. For this SPE step. various types of sorbents, protocols, and devices have been used, and their respective advantages and disadvantages are discussed. For the off-line SPE of estrogens and progestogens from water samples, a syringe type cartridge LiChrolut RP-18 (500 mg) was selected out of two other sorbents--LiChrolut EN (200 mg) and Isolut ENV (500 mg)--for use with the automated sample preparation instrument ASPEC XL. For the on-line SPE and analysis of water samples the 10 mm x 2 mm I.D. HySphere-Resin-GP cartridge, was preferred to the C18 Baker, the PLRP-S, and the Oasis HLB. for use with the Prospekt system. A completely manual protocol based on the use of Sep-Pak C18 Plus cartridges was developed for purification of sediment extracts. All procedures were shown to be linear over a wide range of concentration, exhibited satisfactory repeatability and accuracy, and reached limits of detection usually in the low ng/l and ng/g range. Comparatively, the on-line method was shown to be advantageous in terms of automation and general method performance.     

Modified liquid displacement method for determination of pore size distribution in porous membranes

A new method called constant pressure liquid displacement method (CPLM) was developed and tested to measure the pore size distribution of porous membranes. The permeability, defined as a ratio of the flow rate to the pressure applied, used to be assumed constant either for a conventional liquid displacement method or for a bubble point method, leading to the erroneous interpretation of the pore size distribution. However, it was possible to eliminate such an assumption by measuring the flow rates experimentally at a standard low pressure through the pores penetrated with a permeating liquid according to the proposed method. The pore size distribution for a hydrophobic PVDF membrane was successfully measured by the CPLM and compared with those measured by two different methods such as the conventional liquid displacement method and the mercury intrusion method.     

Intercomparison of five methods for the determination of trace metals in sea water

Trace elements (Mn, Fe, Co, Zn, Ni, Cu and Cr) were preconcentrated from sea water by retention on Chelex-100 resin, APDC/8-quinolinol complexation followed by extraction with 4-methyl-2-pentanon or Freon-113, or coprecipitation with Mg(OH)₂ or Fe(OH)₂. After consideratin of analytical blanks, extraction efficiency, precision preconcentration factor, and suitability for operation on board ship, the best results were obtained by preconcentrating Mn, Fe, Co, Zn, Ni and Cu on Chelex-100 resin and coprecipitation of chromium(III) and (VI) with Fe(OH)₂. Graphite-furnace atomic absorption spectrometry and inductively-coupled plasma atomic emission spectrometry were used for the final measurements. The accuracy of the method was tested by using the reference sea water sample NASS-1.     

PIXE and radioactivity measurements for elemental determination in river water and sediment samples

In order to evaluate the evolution of contamination we collected river water and sediment samples in the every spring season since 1998. The elemental analysis of water and sediment samples was performed by PIXE using the 3×2 MeV NEC Tandem accelerator at the Taipei Institute of Physics. The characterization of - and -radioactive levels for water and sediment samples was performed by a BH1216, low background radioactivity instrument at the Shanghai Institute of Nuclear Research. The PIXE results showed that the elemental contents of Cl, K, Ca, Cr, Mn, Fe, Zn and Pb in river water gradually decreased with the rising tide. At high tide, their concentrations were minimum and then increased toward the ebb tide. The analysis also demonstrated that the radioactivity of water samples had been gradually decreasing year by year. It was found that the decreasing rate of -radioactivity was a little quicker than that of -radioactivity. Further aspects of environmental data evaluation and assessment are also discussed.     

Capillary electrophoretic determination of inorganic anions in the drainage and surface water samples.

Capillary electrophoresis was used for separation and quantitation of several inorganic anions in the drainage and surface water samples from the region with extensive use of fertilisers. Baseline separation of 13 small anions including nitrite and nitrate up to the concentrations of 100 mg/l was achieved in less than 5 min. The electrolyte consisted of 3 mM K2CrO4, 30 microM cetyltrimethylammonium bromide and 3 mM boric acid at pH 8. The method yielded precisions of 1.8-7.2% (RSD, n = 10) and detection limits from 4 micrograms/l (Cl-) up to 500 micrograms/l (citrate). The results of the CE method were compared to ion chromatography using water-acetonitrile (86:14) at pH 8.6 adjusted with NaOH as the mobile phase and consistent results were obtained.     

毛细管电泳法快速检测饮用水中的常见阴离子

用毛细管电泳法快速检测饮用水中常见的阴离子,并对几种电解液进行了对比试验,试验结果表明,以TTAOH(十四烷基三甲基氢氧化胺)作电渗流改进剂,pH 9.1的电解液检测效果为最佳;该方法所检离子线性相关系数均在0.999以上.     

Use of the mathematical apparatus of two-component spectrophotometry for the simultaneous catalymetric determination of two anions

Previously studied reactions of aluminum(III) with Xylenol Orange and of cobalt(III) with nitroso-R salt in weakly acidic solutions were proposed for the simultaneous catalymetric determination of carbonate and borate ions and carbonate and phosphate ions, respectively. It was demonstrated that the mathematical apparatus of two-component spectrophotometry is suitable for processing the results of analysis.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 1, 2005, pp. 7–10.Original Russian Text Copyright © 2005 by Mikhailova, Belikov, Blank.     

The determination of lead in water and sediment samples using a lead ion-selective electrode

Lead concentrations in water and sediment samples near a stationary metal emission source were determined using the lead ion-selective electrode. These results were then verified by use of atomic absorption spectrophotometric methods. Samples were collected at three strategic sites near a local lead company in Southeast Houston, Texas. Accumulated rain water and sediment (soil deep down core) were analyzed in order to estimate lead concentration as a function of depth. Data indicate that the level of lead concentrations in both surface water and water extracted from the sediments exceed the limits for drinking water as established by the Environmental Protection Agency. The lead concentrations of the soil samples were higher in most cases when compared with various soils in the United States. The highest concentrations of lead were found in surface water samples.