新型层状氟化磷酸铝[C4H12N2][Al2(PO4)2(H2O)2F2]的水热合成与表征

自从1982年Wilson等发现一类新型微孔材料磷酸铝分子筛(AlPO4-n)以来,大量具有新颖结构的磷酸铝化合物被合成出来,它们在催化、离子交换、吸附和主-客体组装等方面均具有潜在的应用前景,这类化合物大多是在水热或溶剂热体系中和有机模板剂存在条件下合成的,1978年,Flanigen等首先在反应体系中加入氟离子作矿化剂合成了硅晶体,后来,氟离子方法在硅铝体系和金属磷酸盐体系中也得到了广泛的应用,氟离子在反应过程中起到矿化剂或结构导向剂的作用,     

基于数据挖掘方法的开放骨架磷酸铝定向合成参数分析

开放骨架磷酸铝化合物是多孔晶体材料的一个重要家族。然而,这类材料的合成受到反应原料、凝胶组成、溶剂、模板剂、结晶温度和结晶时间等多个因素的影响。本文以吉林大学"无机制备与合成化学国家重点实验室"建立的开放骨架磷酸铝合成反应数据库为研究对象,采用最大权重最小冗余特征选择算法(Maximum weight and minimum redundancy,MWMR),在充分考虑合成参数自身的重要程度和合成参数之间的相关关系的前提下,分析了溶剂、模板剂等合成参数对于合成含有(8,6)元环结构开放骨架磷酸铝的影响。通过大量实验验证了该方法在开放骨架磷酸铝合成参数分析中的有效性,分析了合成参数对产物生成的影响。实验结果表明模板剂的几何参数、模板剂中C原子和N原子的个数比,溶剂的偶极距等参数可能对于该类结构的合成具有较为重要的影响。     

基于数据挖掘方法的开放骨架磷酸铝定向合成参数分析

开放骨架磷酸铝化合物是多孔晶体材料的一个重要家族。然而,这类材料的合成受到反应原料、凝胶组成、溶剂、模板剂、结晶温度和结晶时间等多个因素的影响。本文以吉林大学“无机制备与合成化学国家重点实验室”建立的开放骨架磷酸铝合成反应数据库为研究对象,采用最大权重最小冗余特征选择算法(Maximum weight and minimum redundancy,MWMR),在充分考虑合成参数自身的重要程度和合成参数之间的相关关系的前提下,分析了溶剂、模板剂等合成参数对于合成含有(8,6)元环结构开放骨架磷酸铝的影响。通过大量实验验证了该方法在开放骨架磷酸铝合成参数分析中的有效性,分析了合成参数对产物生成的影响。实验结果表明模板剂的几何参数、模板剂中C原子和N原子的个数比,溶剂的偶极距等参数可能对于该类结构的合成具有较为重要的影响。     

模板剂对SAPO-34分子筛晶粒尺寸和性能的影响

分别以三乙胺，四乙基氢氧化铵及二者的混合物为模板剂合成了硅磷酸铝分子筛ＳＡＰＯ－３４。应用ＸＲＤ，ＳＥＭ，ＤＴＡ和ＮＨ３－ＴＰＤ等方法考察了合成产品的物化性能，所得结果表明，模板剂的种类对ＳＡＰＯ－３４的晶粒大小和酸性质有显著影响。在甲醇转化制低碳烯烃的过程中，以不同模板剂合成的ＳＡＰＯ－３４的催化性能也不同，其中，以双模板剂合成的分子筛具有较高的低碳烯烃选择性。     

钒氧化物微/纳米空心球制备技术的研究

钒氧化物微/纳米空心球由于具有比表面积高、负载容量大、密度低等特性,在催化剂、传感器、锂离子电池、电池阴极材料等相关行业中有着广泛的应用前景和研究价值。本文综述了钒氧化物微/纳米空心球材料的制备方法,包括软模板剂法、硬模板剂法、水热合成法和溶剂热合成法等的研究进展,并对今后的研究方向进行了展望。     

基于遗传编程方法的微孔磷酸铝的定向合成研究

根据微孔磷酸铝合成数据的特点,针对合成数据库中合成参数过多和交叉描述等问题,利用改进的遗传编程算法对具有(6,8)元环的微孔磷酸铝合成参数进行特征提取,优化出新的复合特征来更好地描述磷酸铝合成中溶剂和模板剂的特征,并通过参数进化过程的研究,考察了模板剂和溶剂对产物生成的具体影响,从而指导具有特定结构磷酸铝的定向合成.     

用分子动力学模拟方法研究层孔与微孔磷酸铝化合 物中有机胺的模板作用: 指 导定向合成的有效途径

用分子动力学方法,研究了有机胺模板剂对二维层孔与三维微孔磷酸铝化合物的模板作用。依据主-客体间的非键相互作用能量,可以有效地预测出适于某一特定结构的有机胺模板剂。通过选择理论预测的有机胺分子作模板剂,在溶剂热体系中可以定向地合成出具有特定结构的化合物。这一工作对于微孔功能体系的分子工程学研究具有一定的指导意义。     

用分子动力学模拟方法研究层孔与微孔磷酸铝化合 物中有机胺的模板作用: 指 导定向合成的有效途径

用分子动力学方法,研究了有机胺模板剂对二维层孔与三维微孔磷酸铝化合物的模板作用。依据主-客体间的非键相互作用能量,可以有效地预测出适于某一特定结构的有机胺模板剂。通过选择理论预测的有机胺分子作模板剂,在溶剂热体系中可以定向地合成出具有特定结构的化合物。这一工作对于微孔功能体系的分子工程学研究具有一定的指导意义。     

TS—1沸石的合成,结构及催化性能探讨

讨论了用两种不同硅源合成钛硅沸石ＴＳ－１的方法和合成过程中应注意的问题，并通过ＸＲＤ、ＩＲ、ＴＥＭ和ＳＳＡ等手段对沸石的结构及热稳定性进行了表征和研究，确认了钛已进入沸石骨架，初步探讨了ＴＳ－１沸石合成时ＴＰＡ离子的模板作用机理，此外，通过在温和条件下用Ｈ２Ｏ２选择性氧化正己烷的反应，考察了ＴＳ－１沸石的催化活性，得到了比较满意的结果。     

4,4‘—对苯二甲酰基二氧二苯甲酸与酸二醇的共聚及液晶性能研究

以对苯二甲酸和对羟基苯甲酸为起始原料合成了液晶单体４,４’－对苯二甲酰地氧二苯甲酰氯（ＴＯＢＣ）,用ＴＯＢＣ分别与癸二醇－１,１０,己二醇－１,６,戊二醇－１,５,丁二醇－１,４和乙二醇进行缩聚反应,生成了一系列主链型热致液晶共聚酯。用ＤＳＣ、热台偏光显微镜和Ｘ－射线衍射仪等对合成的共聚酯的液晶行为进行了表征。结果表明,合成的共聚互均为向列型热致液晶,共液晶温度范围在２０℃￣６８℃之间,并随着脂肪     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.