Biogenic synthesis from <Emphasis Type="Italic">Prunus</Emphasis> × <Emphasis Type="Italic">yedoensis</Emphasis> leaf extract,characterization, and photocatalytic and antibacterial activity of TiO<Subscript>2</Subscript> nanoparticles

Green synthesis of TiO₂ nanoparticles (NPs) from Prunus × yedoensis leaf extract (PYLE), and their application for removal of phosphate and their antibacterial activity, were studied for the first time. NPs were obtained using a green chemistry approach from 0.1 M TiO₂ and PYLE at ratio of 1:1 (v/w). Initial confirmation of production of TiO₂ NPs was provided by a color change from white to light yellow, then calcination was performed at 500 °C for 1 h. The TiO₂ NPs were characterized using various analytical techniques such as ultraviolet–visible (UV–Vis) spectroscopy, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The results indicated that the optimal amount of TiO₂ NPs for removal of phosphate was 10 mg/l (10 ppm) with duration of 25 min. Furthermore, the antibacterial activity of TiO₂ NPs was also investigated using two different bacteria (Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli) in aqueous medium. The results revealed highly efficient sunlight-driven photocatalytic and antibacterial activity of TiO₂ NPs.     

Thermo-responsive and antifouling PVDF nanocomposited membranes based on PNIPAAm modified TiO2 nanoparticles

A novel hydrophilic nanocomposite additive(TiO2-g-PNIPAAm) was synthesized by the surface modification of titanium dioxide(TiO2) with N-isopropylacrylamide(NIPAAm) via "graft-from" technique. And the nanocomposite membrane of poly(vinylidene fluoride)(PVDF)/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis(TGA). Fourier transform infrared attenuated reflection spectroscopy(FTIR-ATR) and X-ray photoelectronic spectroscopy(XPS) characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy(SEM) was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8° of the PVDF membrane to 61.2° of the nanocompostie membrane. Bovine serum albumin(BSA) static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-gPNIPAAm. The maximum BSA adsorption at 40 °C was about 3 times than that at 23 °C. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.     

Antibacterial photocatalytic self‐cleaning poly(vinylidene fluoride) membrane for dye wastewater treatment

Membrane technology has been successfully applied for the removal of dyes from wastewater in the textile industry. A novel poly(vinylidene fluoride) (PVDF) membrane was prepared via blending with different dosages of Ag‐TiO₂‐APTES composite for dyeing waste water treatment in our study. And the effect of Ag‐TiO₂‐APTES blended into the PVDF membrane was discussed, including the rejection rate of methylene blue (MB) dye, membrane morphology, surface hydrophilicity, antibacterial activity, and a certain photocatalytic self‐cleaning performance. X‐ray diffraction and Fourier transform infrared characterization confirmed that Ag‐TiO₂ was functionalized by amount of hydroxyl group (−OH) and amino group (NH−), which provided by APTES. Contact angle measurement certified that the hydrophilicity of the membrane surface increased, with the contact angle decrease to 61.4° compared with 81.8° of original PVDF membrane. MB rejection rate was also increased to 90.1% after addition of Ag‐TiO₂‐APTES, and the rejection of original membrane was only 74.3%. The morphologies of membranes were observed by scanning electron microscope, which indicated that Ag‐TiO₂‐APTES had a good dispersion in membrane matrix and also improved the microstructure of membranes. Besides, UV irradiation experiments were performed on the composite films contaminated by MB, and the result showed that Ag‐TiO₂‐APTES nanoparticle provided PVDF membrane with a certain photodegradation capacity under UV irradiation. Moreover, antibacterial activity of the composite membrane was also demonstrated through antibacterial experiment, Escherichia coli as the representative bacteria. Perhaps, this research may provide a new way for PVDF blending modification.     

Preparation,photocatalytic activity and mechanism of nano-Titania/Nafion hybrid membrane

Nano-Titania/Nafion (TiO₂/Nafion) hybrid membranes were prepared by recasting, using Nafion solution and TiO₂ anatase hydrosol as the raw materials. The microstructure of the hybrid membrane was characterized by X-ray diffraction, high-resolution transmission electron microscopy (HR-TEM), X-ray Photoelectron Spectroscopy and Fourier Transform Infrared Spectroscopy (FT-IR). The photocatalytic properties of TiO₂/Nafion hybrid membranes were evaluated. Furthermore, endurance of photocatalytic activity of the hybrid membrane was investigated. The results indicate that the TiO₂ Nanoparticles are bounded to Nafion molecule via Ti-O-S bonds and the formed flocculates are distributed homogeneously throughout the recasting Nafion membrane, while the initial pure anatase TiO₂ nanoparticles remain intact in re-crystallized membrane. The hybrid membranes possessed excellent photocatalytic activities with and without H₂O₂. Moreover, the degradation of photocatalytic activities has been better controlled with the presence of H₂O₂.     

Preparation and characterization of TiO2/Pebax/(PSf‐PES) thin film nanocomposite membrane for humic acid removal from water

New thin film composite (TFC) membrane was prepared via coating of Pebax on PSf‐PES blend membrane as support, and its application in wastewater treatment was investigated. To modify this membrane, hydrophilic TiO₂ nanoparticles were coated on its surface at different loadings via dip coating technique. The as‐prepared membrane was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), field emission SEM, and contact angle analysis. The Fourier transform infrared spectroscopy analysis and surface SEM images indicated that TiO₂ was successfully coated on the membrane surface. In addition, the results stated that the hydrophilicity and roughness of membrane surface increased by addition of TiO₂ nanoparticles. Performance of TFC and modified TFC membranes was evaluated through humic acid removal from aqueous solution. Maximum permeate flux and humic acid rejection were obtained at 0.03 and 0.01 wt% TiO₂ loadings, respectively. Rejection was enhanced from 96.38% to 98.92% by the increase of feed concentration from 10 to 30 ppm. Additionally, membrane antifouling parameters at different pressures and feed concentration were determined. The results indicated that surface modification of membranes could be an effective method for improvement of membrane antifouling property.     

可见光响应碳掺杂的光催化剂涂覆于塞流反应器上分解气态芳香化合物(英文)

A plug‐flow reactor coated with carbon‐doped TiO2 (C‐TiO2 ) powder was investigated for the control of vaporous aromatics (benzene, toluene, ethylbenzene, and o‐xylene (BTEX)) under a range of experimental conditions. The characteristics of the as‐prepared C‐TiO2 and a reference Degussa P25 TiO2 powder were examined using X‐ray diffraction, scanning electron microscopy, diffuse‐reflectance ultraviolet‐visible‐near infrared spectroscopy, and Fourier transform infrared spectroscopy. The experimental conditions for the photocatalytic performance of the as‐prepared C‐TiO2 photocatalyst were controlled using three operational parameters, relative humidity, flow rate, and input concentration. Unlike other target compounds, very little benzene was removed by the C‐TiO2 photocatalyst under visible‐light irradiation. In contrast, the C‐TiO2 exhibited higher removal efficiencies for the other three target compounds (toluene, ethylbenzene, and xylene) compared with those achieved using unmodified TiO2 under visible‐light irradiation. The highest removal efficiency was obtained at a relative humidity value of 45%. Specifically, the toluene removal efficiency determined at a relative humidity of 45% was 78%, whereas it was close to 0%, 7.2%, and 5.5% for relative humidity values of 20%, 70%, and 95%, respectively. In addition, the removal efficiencies for the three target compounds decreased as the flow rate or input concentration increased. These findings indicate that the as‐prepared C‐TiO2 photocatalyst could be used for the removal of toxic vaporous aromatics under optimized operating conditions.     

Enhanced inactivation of Escherichia coli with Ag-coated TiO2 thin film under UV-C irradiation

The inactivation of Escherichia coli (E. coli) in water was investigated systematically with Ag-coated TiO₂ thin film under UV-C irradiation. Compared with UV-C irradiation alone, the inactivation of E. coli by the UV/Ag-TiO₂ process was enhanced and the photoreactivation of the bacteria was much repressed. Moreover, atomic force microscopy (AFM) measurements of E. coli showed that the presence of Ag-TiO₂ thin film during UV exposure could expedite the destruction of cell wall and cell membrane, which was further confirmed by the formation of malondialdehyde (MDA) and leakage of intracellular potassium ion (K⁺) and protein. The results suggest that the cell structure destruction might be the major reason for the enhancement of inactivation efficiency, and the prepared Ag-TiO₂ thin films show potential as a new improvement tool for UV-C disinfection.     

Nafion/TiO<Subscript>2</Subscript> hybrid membrane fabricated via hydrothermal method for vanadium redox battery

To improve the performance of Nafion membrane as a separator in vanadium redox battery (VRB) system, a Nafion/TiO₂ hybrid membrane was fabricated by a hydrothermal method. The primary properties of this hybrid membrane were measured and compared with the Nafion membrane. The Nafion/TiO₂ hybrid membrane has a dramatic reduction in crossover of vanadium ions compared with the Nafion membrane. The results of scanning electron microscope, energy dispersive X-ray spectroscopy, and X-ray diffraction of the hybrid membrane revealed that the TiO₂ phase was formed in the bulk of the prepared membrane. Cell tests identified that the VRB with the Nafion/TiO₂ hybrid membrane presented a higher coulombic efficiency (CE) and energy efficiency (EE), and a lower self-discharge rate compared with that of the Nafion system. The CE and EE of the VRB with the hybrid membrane were 88.8% and 71.5% at 60 mA cm⁻², respectively, while those of the VRB with Nafion membrane were 86.3% and 69.7% at the same current density. Furthermore, cycling tests indicated that the Nafion/TiO₂ hybrid membrane can be applied in VRB system.     

The damage of outer membrane of Escherichia coli in the presence of TiO2 combined with UV light

The biological consequences of exposure to TiO₂, UV light, and their combined effect were studied on the Escherichia coli (E. coli) cells. The damage of outer membrane was observed for the cells after treatment of TiO₂ or UV light. TiO₂ alone can break down lipopolysacchride (LPS), the outermost layer of the E. coli cells, but was not able to destroy peptidoglycan underneath. The same phenomenon was observed for E. coli under 500 W UV light treatment alone. However, the outer membrane of E. coli could be removed completely in the presence of both TiO₂ and UV light, and the cells became elliptical or round without a mechanically strong network. From the analysis of the concentrations for Ca²⁺ and Mg²⁺, a large amount of Ca²⁺ and Mg²⁺ were detected in the solution of the treated cells by photo-catalysis, and this was attributed to the damage of LPS dispatches. After TiO₂ or UV light treatment, a significant decrease in membrane fluidity of E. coli was found from an increase in fluorescence polarization by a fluorescence probe. The permeability of the treated cells increased to some degree that can be confirmed by quantum dots labeling technique.     

Organic–inorganic hybrid membranes prepared from the sol–gel process of poly(butyleneadipate‐co‐terephthalate) and TiO2

Organic–inorganic hybrids based on poly(butyleneadipate‐co‐terephthalate)/titanium dioxide (PBAT/TiO₂) hybrid membranes were prepared via a sol–gel process. The PBAT/TiO₂ hybrid membranes were prepared for various PBAT/TiO₂ ratios. The resulting hybrids were characterized with a morphological structure, hydrophilicity, biodegradability, and thermal properties. The results showed that macrovoids underwent a transition into a sponge‐like membrane structure with the addition of TiO₂. After sol–gel transition, a strong interaction between the inorganic network and polymeric chains led to an increase in glass transition temperature (T_g), thermal degrading temperature, and hydrophilicity, and hence a higher biodegradability. According to X‐ray diffraction measurements of the crystal structure of the hybrid, the presence of TiO₂ did not change the crystal structure of PBAT. TiO₂ networks are uniformly dispersed into the PBAT matrix and no aggregation of TiO₂ networks in the hybrid membranes was observed through the small angle X‐ray scattering measurements. Thus, the sol–gel process of PBAT and TiO₂ can be used to prepare a hybrid with higher application temperature and faster biodegradation rate. Copyright © 2008 John Wiley & Sons, Ltd.     

溶胶-凝胶法制备聚砜/二氧化钛有机-无机杂化超滤膜

采用溶胶-凝胶法制备了不同TiO₂含量的PSF/TiO₂杂化超滤膜, 并通过SEM, XRD TG/DTA, 超滤实验, 机械性能测试, 水接触角测试等手段对膜的结构和性能进行了表征. 结果表明: 当TiO₂的质量分数为9.3%时, 膜亚层的指状孔消失, 形成了以纳米TiO₂颗粒为交联点的网络状孔, 同时膜的亲水性、机械性能和热稳定性都有明显的改善, 并在截留滤基本保持不变的情况下, 水通量明显提高. 但过高的TiO₂含量(w≥11.9%)会产生严重的纳米颗粒团聚现象而造成膜的各项性能指标下降.     

Ceramic membranes modified with catalytic oxide films as ensembles of catalytic nanoreactors

Hybrid catalytic membrane systems have been produced by modifying porous ceramic membranes with metal oxide films. A two-layer cermet membrane consisting of a flexible stainless steel layer and an overlying porous TiO₂ ceramic layer and a ceramic titanium carbide membrane are examined. The membrane surfaces have been modified by the alkoxide method using colloidal organic solutions of metal complex precursors. Producing a tetragonal single-phase ZrO₂/Y₂O₃ coating on the cermet surface increases the abrasion strength of the ceramic layer. CO oxidation and the oxidative conversion of methane into synthesis gas and light hydrocarbons can be markedly intensified by modifying the membrane channels with Cu_0.03Ti_0.97O_2±δ and La + Ce/MgO catalysts, respectively. A method has been developed for depositing, onto the geometrical surface of a membrane, a film of the new single-phase oxide P_0.03Ti_0.97O_2±δ with an anatase structure and uniform pores of mean diameter 〈d〉 ～ 2 nm. Blocks of zeolite-like silicalite can be formed on the surface of the phosphorus-titanium oxide film. The resulting hybrid membrane is characterized by an anisotropic permeability depending on the flow direction. This property has an effect on conversion and selectivity in the nonoxidative dehydrogenation of methanol.     

Nano oxides incorporated sulfonated poly(ether ether ketone) membranes with improved selectivity and stability for vanadium redox flow battery

Three kinds of sulfonated poly(ether ether ketone) (SPEEK)/nano oxide (Al₂O₃, SiO₂, and TiO₂) composite membranes are fabricated for vanadium redox flow battery (VRFB) application. The composite membranes with 5 wt% of Al₂O₃, SiO₂, and TiO₂ (S/A-5 %, S/S-5 %, and S/T-5 %) exhibit excellent cell performance in VRFB. Incorporation of nano oxides (Al₂O₃, SiO₂, and TiO₂) in SPEEK membrane improves in aspect of thermal, mechanical, and chemical stabilities due to the hydrogen bonds’ interaction between SPEEK matrix and nano oxides. The energy efficiencies (EEs) of composite membranes are higher than that of Nafion 117 membrane, owing to the good balance between proton conductivity and vanadium ion permeability. The discharge–capacity retentions of composite membranes also overwhelm that of Nafion 117 membrane after 200 cycles, indicating their good stability in VRFB system. These low-cost SPEEK/nano oxide composite membranes exhibit great potential for the application in VRFB.     

Nano/subnano-tuning of porous ceramic membranes for molecular separation

In sol–gel processing, porous ceramic membranes can be prepared by sol-coating porous substrates and drying for gelling, followed by a firing process. Ceramic membranes prepared by sol–gel processing can be categorized into amorphous materials such as silica, and crystalline materials such as alumina and titania. Amorphous silica networks, which can be prepared by the polymeric sol route, have ultra-microporous pores that allow small molecules such as helium and hydrogen to permeate. On the other hand, crystalline materials, which are mostly prepared by the colloidal sol route, have nano-sized pores in the range of one to several nanometers. In this article, sol–gel derived SiO₂ and TiO₂ membranes with controlled pore sizes in the range of sub-nano to nanometers will be reviewed with respect to membrane preparation and to their application in the separation of the gas and liquid phases. Ceramic membranes with high performance can be obtained by precise control of membrane structures (pore size, pore size distribution, thickness, pore shape, etc.) and membrane materials (SiO₂, TiO₂, composite oxide, hybrid materials, etc.). Nano/subnano-tuning of porous ceramic membranes is quite important for the improvement of membrane permeability and selectivity.     

Preparation and characterization of novel polyimide/functionalized ZnO bionanocomposite for gas separation and study of their antibacterial activity

In the present investigation novel Polyimide/functionalized ZnO (PI/ZnO) bionanocomposites containing amino acid (Methionine) and benzimidazole pendent groups with different amounts of modified ZnO nanoparticles (ZnO NPs) were successfully prepared through ultrasonic irradiation technique. Due to the high surface energy and tendency for agglomeration, the surface ZnO NPs was modified by a coupling agent as 3- methacryloxypropyl-trimethoxysilane (MPS) to form MPS-ZnO nanoparticles. The ultrasonic irradiation effectively changes the rheology and the glass transition temperature and the crystallinity of the composite polymer. PI/ZnO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscope (TEM). TEM analysis showed that the modified ZnO nanoparticles were homogeneously dispersed in polymer matrix. The TGA results of PI/ZnO nanocomposites showed that the thermal stability is obviously improved the presence of MPS-ZnO NPs in comparison with the pure PI and that this increase is higher when the NP content increases. The permeabilities of pure H₂, CH₄, O₂, and N₂ gases through prepared membranes were determined at room temperature (25 °C) and 20 bar feed pressure. The membranes having 20% ZnO showed higher values of H₂ permeability, and H₂/CH₄ and H₂/N₂ ideal selectivities (the ratio of pair gas permeabilities) compared with other membranes. The antibacterial activity of bionanocomposite films was tested against gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). Further, it was observed that antibacterial activity of the resulting hybrid biofilms showed somewhat higher for gram-positive bacteria compared to gram-negative bacteria.     

Fabrication and characterization of a novel TiO2 nanoparticle self-assembly membrane with improved fouling resistance

A novel TiO₂ nanoparticle self-assembly membrane was prepared based on ultrahigh molecular weight poly(styrene-alt-maleic anhydride)/poly(vinylidene fluoride) (SMA/PVDF) blend membrane. TiO₂ nanoparticle solution was beforehand prepared via the controlled hydrolysis of titanium tetraisopropoxide. The diameter (10 nm or less) and anatase crystal structure were analyzed using transmission electron microscopy (TEM) and X-ray diffraction (XRD). The SMA/PVDF blend membranes prepared by the phase inversion method were immersed into the TiO₂ nanoparticle solution for a week to produce TiO₂ self-assembly membranes. The chemical compositions in membrane surface were analyzed by X-ray photoelectron spectroscopy (XPS). The membrane morphologies were measured by scanning electron microscopy (SEM). Finally, the membrane hydrophilicity, protein anti-fouling property and the molecular weight cutoff (MWCO) were characterized by water contact angle measurement, static protein absorption and filtration experiments, respectively. It is demonstrated that, in comparison to PVDF/SMA blend membrane, the permeability and anti-fouling ability of TiO₂ self-assembly membranes were significantly improved.     

Preparation of a visible light-driven Bi2O3–TiO2 composite photocatalyst by an ethylene glycol-assisted sol–gel method,and its photocatalytic properties

A visible light-driven Bi₂O₃–TiO₂ composite photocatalyst was prepared by an ethylene glycol-assisted sol–gel method in which ethylene glycol acted as a polycondensation agent to capture metal ions by reacting with bismuth and titanium sources via a complex polycondensation pathway. The photocatalyst was characterized by X-ray photoelectron spectroscopy, X-ray diffraction, acquisition of N₂ adsorption–desorption isotherms, transmission electron microscopy, and UV–visible diffuse reflectance spectroscopy. The results revealed that the Bi₂O₃–TiO₂ composite was of smaller particle size, greater specific surface area, and had stronger absorbance in the visible light region than pure TiO₂. The photocatalytic activity of the as-prepared catalyst was evaluated by degradation of rhodamine B under visible light irradiation (λ > 400 nm); the as-prepared Bi₂O₃–TiO₂ composite was substantially more active than pure TiO₂. This was ascribed to the high surface area and the heterojunction structure.     

Impact of synthesis methods on nanosized silver modified titania photocatalysts

This work reports the synthesis and studies on photocatalytic activity of a material based on titanium oxide doped with silver. Two kinds of Ag-deposited TiO₂ were synthesized via soft chemical reduction (SCR) and photodeposition (PD) methods. The structure, composition and chemical properties of the obtained products were investigated by X-ray diffraction, UV-vis diffuse reflectance spectroscopy, photoluminescence spectra and Fourier transformation infrared spectroscopy techniques. The photocatalytic oxidation activity in a course of removal and destruction of organic compounds such as methyl orange dye using Ag/TiO₂ hybrid material was studied. The results suggest that SCR synthesized Ag/TiO₂ exhibited better photocatalytic performance that that obtained by PD method. The relationship between the synthesis method and photocatalytic activity of synthesized Ag/TiO₂ was analyzed with a focus on the plasmonic photocatalysis of silver. When compared to PD method, the SCR produced more homogeneous and smaller silver particles with a better dispersion than photodeposition that results in a relative increase of material activity in the photocatalytic degradation of dye pollutant.     

Preparation and photocatalytic antibacterial property of nitrogen doped TiO2 nanoparticles

Nitrogen doped TiO₂ (N-TiO₂) nanoparticles with about 30 nm in size were produced by a sol–gel method and characterized respectively by UV–vis, X-ray diffraction (XRD), Transmission electron microscopy, X-ray photoelectron spectroscopy (XPS). Their photocatalytic antibacterial properties were evaluated by the antibacterial ratio against Escherichia coli in dark and under simulated sunlight respectively. The XRD pattern showed that the doped nano-TiO₂ was mainly composed of anatase phase. The XPS spectra of the N-TiO₂ sample indicated that TiO₂ was doped by nitrogen atom. The nitrogen doping created a new N 2p state slightly above the valence band top consists of O 2p state, and this pushes up the valence band top and decreased the band gap. Which leaded to the absorption edge was red-shifted to the visible light region of UV–vis spectra of nitrogen doped nano-TiO₂ comparing with pure nano-TiO₂. The antibacterial percentage of N-TiO₂ against E. coli reached to 90 % under simulated sunlight for 2 h, which was much better than that in dark, also than that of pure nano-TiO₂. The photo-catalytic antibacterial activity was activated under visible light. The structure and integrity of cell wall and cell membrane were destructed, and even caused the bacteria death.     

A spontaneous solid-state NO donor to fight antibiotic resistant bacteria

This study substantiates the chemical origin of a free-radical-driven antibacterial effect at the surface of biomedical silicon nitride (Si₃N₄) in comparison with the long-known effect of oxygen reduction by oxidized TiO₂ at the surface of biomedical titanium alloys. Similar to the antibacterial effect exerted by reactive oxygen species (ROS; i.e., superoxide anions, hydroxyl radicals, singlet oxygen, and hydrogen peroxide) from TiO₂, reactive nitrogen species (RNS), such as nitrous oxide (N₂O), nitric oxide (NO), and peroxynitrite (^?OONO) in Si₃N₄, severely affect bacterial metabolism and lead to their lysis. However, in vitro experiment with gram-positive Staphylococcus epidermidis (S. epidermidis, henceforth) revealed that ROS and RNS promoted different mechanisms of lysis. Fluorescence microscopy of NO radicals and in situ time-lapse Raman spectroscopy revealed different metabolic responses of living bacteria in contact with different substrates. After 48 h, the DNA of bacteria showed complete destruction on Si₃N₄, while carbohydrates of the peptidoglycan membrane induced bacterial degradation on Ti-alloy substrates. Different spectroscopic fingerprints for bacterial lysis documented the distinct effects of RNS and ROS. Spontaneously activated in aqueous environment, the RNS chemistry of Si₃N₄ proved much more effective in counteracting bacterial proliferation as compared to ROS formed on TiO₂, which requires external energy (photocatalytic activation) to enhance effectiveness. Independent of surface topography, the antibacterial effect observed on Si₃N₄ substrates is due to its unique kinetics ultimately producing NO and represents a new intriguing avenue to fight bacterial resistance to conventional antibiotics.