首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
介孔钛硅新催化材料   总被引:2,自引:0,他引:2  
本文综述了介孔钛硅新催化材料的制备方法,归纳评述了各类介孔钛硅材料的制备技术和相应的产物的结构特点,介绍了现有的表征介孔钛硅材料孔结构和钛活性位的重要技术手段和特征,概括了含钛介孔材料在有机物液相催化选择氧化方面的应用,讨论了提高钛位的催化活性、结构稳定性、疏水性、钛硅比等的技术方法;提出了介孔钛硅材料研究存在的问题并展望了将来的研究方向。  相似文献   

2.
钛硅分子筛TS-1的合成、表征及催化性能   总被引:3,自引:0,他引:3  
钛硅分子筛TS-1自Taramasso等[1]首次报道合成以来,由于其优异的选择氧化催化 性能及其催化的反应具有对环境污染轻,反应条件温和等优点而备受关注. 钛硅分子筛的制 备及应用研究是分子筛催化领域中的热点之一. 在经典的合成体系中,四丙基氢氧化铵(TPAO H)常被用作模板剂[2],这是钛硅分子筛价格较为昂贵的主要原因之一. 国内外学者 都致力于廉价合成体系的开发,Müller等[3]报道了以四丙基溴化铵(TPABr)作模板 剂合成钛硅分子筛. 对于钛源和硅源,人们往往都采用水解趋势较为缓和的钛酯和硅酯,以达 到钛源和硅源的匹配;在合成过程中,要预先将钛酯加入到乙酰丙酮或异丙醇溶剂中进行稀释 ,并对胶液进行蒸醇处理[2,3]. 这使得钛硅分子筛的合成过程更加复杂,并提高了 其合成费用. 本文以钛酸四丁酯(TBOT)和四氯化钛混合原料作钛源,成功地合成出对丙烯环 氧化具有优异催化性能的钛硅分子筛TS-1,避免了上述的复杂步骤,并降低了钛硅分子筛的成本.  相似文献   

3.
钛硅介孔分子筛   总被引:3,自引:0,他引:3  
罗淑文  陈彤  曾毅  王公应 《化学进展》2008,20(2):212-220
综述了钛硅介孔分子筛的合成、表征及其应用研究进展.评述了钛硅介孔分子筛的合成方法与合成条件对分子筛结构性能、钛物种的配位状态和催化性能的影响.介绍了鉴定钛硅介孔分子筛内骨架钛原子的多种波谱学方法以及钛硅介孔分子筛在选择氧化、光催化、酸催化反应中的应用,并指出钛硅介孔分子筛是一种非常有应用前景的环境友好的多相催化剂.  相似文献   

4.
谢伟  刘月明  汪玲玲  吴鹏 《催化学报》2010,31(5):502-513
 综述了具有 MWW 结构钛硅分子筛的制备方法、孔道和晶体结构的调变和修饰以及催化应用三个方面的研究进展. 与 TS-1 相比, 具有 MWW 结构钛硅分子筛的制备方法多种多样; 其孔道结构可塑性强, 通过采用层间剥离、柱撑以及分子水平硅烷化插硅扩孔技术, 可以增大和暴露孔道和外表面, 满足不同选择氧化反应的要求. 由于 MWW 结构钛硅分子筛拥有复杂而独特的孔道结构, 所以在小分子 (如直链烯烃等) 的环氧化反应, 和大分子 (环状烯烃, 二苯并噻吩等) 氧化反应中都表现出优异的催化性能. 此外, 该钛硅分子筛表现出与 TS-1 完全不同的溶剂效应, 用于烯丙基氯液相环氧化与酮类氨氧化反应主产物选择性更高.  相似文献   

5.
钛硅分子筛TS21由于其优异的催化氧化性能而受到极大关注。TS21的制备及基础研究是催化领域的一个热点。本文综述了近10年来钛硅分子筛TS21的制备研究进展, 讨论了在合成制备过程中模板剂、钛源、硅源、碱源、晶化条件等因素对钛硅分子筛TS21的影响, 并对其物化特点进行了评述。  相似文献   

6.
通过单独水解混合成胶在静态条件下采用水热晶化及水热后处理,在模版剂用量较低和n(Ti)/n(Si)高达1/4的条件下合成了钛硅中孔材料.XRD、FT-IR、UV-Vis DRS和催化选择氧化反应表征结果表明,新合成方法有效防止了成胶过程在高钛含量下产生不溶性钛硅物种,合成产物呈高度有序的MCM-41六方结构,并具有较高的热稳定性和催化选择氧化反应活性.四丁基氢氧化铵在成胶过程不仅有利于钛形成稳定的可溶性物种从而提高其利用率,同时还促进孔墙内基本结构单元的交联和有序化,  相似文献   

7.
催化新材料——钛硅分子筛合成及应用研究   总被引:10,自引:0,他引:10  
周继承  王祥生 《化学进展》1998,10(4):381-394
评述了钛硅分子筛新催化材料的合成及其催化应用的研究进展, 包括钛硅分子筛(TS21) 的水热合成方法、原料、模板剂、影响因素、TS21 同晶取代法合成、表征、活性中心、钛硅分子筛双氧水体系的应用研究及近年中孔钛硅分子筛的进展。对未来的研究提出了建议。  相似文献   

8.
将有机卤素季铵盐以硅烷化键合方式嫁接到钛硅分子筛上,制备了兼备催化氧化烯烃合成环氧化物和环氧化物碳酸酯化反应的新型双功能催化剂,考察了其在丙烯、过氧化氢和二氧化碳一步合成碳酸丙烯酯的催化性能.研究表明,具有大外表面积的层剥离的钛硅分子筛是一种嫁接季铵盐合适的载体,丙基三丁基卤化铵是酯化催化性能优良的功能化基团,两者的偶合使一步法催化丙烯环氧化酯化合成碳酸丙烯酯的收率达48%.该催化剂具有较好的稳定性和重复使用性能.  相似文献   

9.
钛硅分子筛催化1-丁烯环氧化研究   总被引:3,自引:1,他引:2  
自1983年Taramasso等报导TS-1的合成以来,钛硅分子筛的合成及应用一直是分子筛催化领域的热点。经典TS-1合成方法采用四丙基氢氧化铵(TPAOH)为模板剂,合成成本较高、条件苛刻,限制了其应用。用四丙基溴化铵(TPABr)为模板剂代替TPAOH,能够成功地合成TS-1。不同孔道结构的钛硅分子筛,如Ti-β、Ti-MCM-41、Ti-HMS等弥补了TS-1较小孔径的缺点,进一步扩大了钛硅分子筛的应用。本文以不同合成方法得到的TS-1及中孔Ti—HMS为催化剂,双氧水为氧化剂,1-丁烯环氧化合成1,2-环氧丁烷,研究了不同钛硅分子筛对1-丁烯环氧化反应的催化性能。  相似文献   

10.
高钛含量钛硅MCM-41中孔结构材料的合成及表征   总被引:6,自引:0,他引:6  
采用单独水解混合成胶方式在静态水热晶化条件下合成了高钛含量钛硅中孔材料,并以XRD、FT-IR、UV-VisDRS和催化选择氧化反应进行了表征.研究表明,加入四丁基氢氧化铵单独水解可有效防止在高钛含量下产生不溶性钛硅物种,在n(Ti)/n(Si)≤1/4和较低模版剂用量条件下合成的产物呈高度有序的MCM-41六方结构,部分钛在晶化过程进入了中孔骨架.四丁基氢氧化铵的存在同时促进了孔墙内基本结构单元的交联度和有序化.  相似文献   

11.
研究了氧化铜的加入对锆铈复合氧化物的结构与性能的影响 ,发现氧化铜的加入可降低氧化铈的还原温度 ,稳定复合氧化物的立方结构 ,提高对CO氧化的催化活性。增加铈含量能提高催化剂的活性 ,而硫酸盐等可使催化剂的活性降低。掺铜锆铈复合氧化物催化剂的活性几乎不受高温灼烧的影响 ,是一种具有较高热稳定性的催化剂。  相似文献   

12.
Mg-Zn-Al三金属类水滑石的合成及其复合氧化物的催化性能   总被引:4,自引:0,他引:4  
水滑石([Mg_6Al_2(OH)_(16)[CO_3·4H_2O)是一种类似于水镁石结构的层状阴离子黏土,其骨架为阳离子,层间为阴离子。如改变骨架中的金属阳离子或在层间引入不同的阴离子,就可形成各种新组成的类水滑石。水滑石对有机分子反应具有较高的催化活性和选择性,且可以作为复合氧化物催化剂的前体,应用广泛。它作为碱催化剂,可用于醇醛缩合;作为氧化还原催化剂,用于水煤气转化、NO的还原、甲烷氧化反应等犤1,2犦。作为一种具有特殊结构的化合物,各种双金属组分的水滑石或类水滑石的合成、性质与应用已受到广泛的重视犤3…  相似文献   

13.
NOx的催化分解研究   总被引:1,自引:0,他引:1  
马涛  王睿 《化学进展》2008,20(6):798-810
氮氧化物(NOx)的直接催化分解是公认的消除NOx污染最有吸引力的方法。本文综述了NOx催化分解研究领域深受关注的几类催化剂,包括贵金属、金属氧化物、钙钛矿及类钙钛矿型复合氧化物、离子交换的ZSM-5型分子筛、杂多化合物和水滑石类材料等六大类催化剂。介绍了相关的反应机理、反应动力学和催化性能等问题的国内外研究进展,概括了上述催化剂的优缺点,提出了未来的发展方向。  相似文献   

14.
《Comptes Rendus Chimie》2014,17(7-8):641-655
Since the initial discovery of ordered mesoporous silica in early 1990s, considerable innovations were achieved regarding their synthesis, characterization and applications. One of the best outcomes of these intense research efforts is the development of a solid templating method called “nanocasting”, which is based on using mesoporous silica (or carbon) as a rigid template. This solid-to-solid replication method opened the pathway for synthesizing high surface area non-silica mesostructured materials that are challenging to obtain through conventional self-assembly processes which are based on amphiphilic soft structure-directing agents. In particular, the replicated metal oxide mesostructures obtained by this method were found to be highly versatile for a wide range of applications, especially in catalysis, owing to their large specific surface area. Furthermore, the nanocasting method is particularly suited for the synthesis of mixed metal compositions, favored by the possible confinement of mixed precursors in the nanopores of the template. In this account, we discuss some of the recent developments regarding the synthesis of nanocast mixed metal oxides and their perspectives of catalytic applications. It is here the choice of the authors to place emphasis on a few representative examples of compositions (e.g., non-noble metal-based catalysts, perovskites) and catalytic reactions (e.g., hydrogen production, gas-phase oxidation).  相似文献   

15.
Mixed oxides were prepared by the thermal decomposition of the oxalates of cobalt(II) and copper(II) coprecipitated from aqueous solution or made by mechanical mixing. The compositions and structures of the oxides were confirmed by means of TG and X-ray powder diffraction spectroscopy. The catalytic behaviour of the oxides obtained was studied by using the decomposition of H2O2 as a model reaction. The results were compared with those on the oxides produced from the thermal decomposition of mechanically mixed oxalates. The catalytic activities of the mixed oxides were found to be lower than that of pure cobalt oxide, but higher than that of copper oxide. This result was interpreted in terms of the relative standard reduction potential of the catalyst as compared with that of H2O2. The catalytic activity of the mixed oxides obtained from the coprecipitate was found to be lower than that of the oxides obtained from the mechanical mixture at the same temperature. As the temperature of preparation was increased, the catalytic activities of the oxides obtained decreased. This was attributed to the solid-solid interactions, which gave a new phase with lower catalytic activity than those of the interacting phases. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

16.
潘丽  赵永祥 《分子催化》2011,25(2):130-137
采用醇-水溶液加热法制备了复合均匀的ZrO2-SiO2复合氧化物,通过调整复合物中ZrO2含量及焙烧温度对ZrO2-SiO2复合氧化物表面酸量及酸类型进行精细调控,并将其应用于催化四氢呋喃(THF)开环聚合反应.结果表明,当ZrO2含量小于30 mol%时,随着ZrO2含量的增加,复合物总酸量显著增加,且B酸与L酸酸量...  相似文献   

17.
Pure and silica-containing Al hydroxide aerogels were prepared by the supercritical drying method. The samples were later calcined, giving rise to alumina and Si–Al mixed oxides. The materials were characterized from the points of view of their bulk and surface structures. The Si-free material before calcination is well-crystallized boehmite that converts to γ-alumina by calcination. The silica-containing hydroxides are composed of boehmite layers with silicates in the interlayer region. The resulting mixed oxides present silica essentially in the bulk. The surface structure of alumina seems poorly sensitive to silica addition. Surface silanol groups appear only for SiO2more than 4%. No Brønsted acidity appears. Silica addition allows mixed oxides with higher surface areas to be obtained.  相似文献   

18.
合成了Cu/Al原子比分别为2.0、3.1、4.1的CuAl类水滑石样品,焙烧得到CuAl复合氧化物。在Cu/Al原子比为3.1的CuAl氧化物表面浸渍碱金属盐溶液,制备改性CuAl复合氧化物,用AES、XRD、FT-IR、BET、H2-TPR、XPS等技术对催化剂进行了结构表征,考察了CuAl复合氧化物组成、碱金属助剂类型和K的前驱物对改性催化剂在有氧气氛中催化分解N2O活性的影响。结果表明,Na、K、Cs改性CuAl复合氧化物均提高了催化剂活性,但K助剂的增强效应最显著;钾的不同前驱物改性CuAl复合氧化物的催化活性有显著差异,加入碳酸钾、草酸钾提高了催化剂的活性,而加入醋酸钾、硝酸钾反而降低了催化剂活性。优化出的K改性CuAl复合氧化物催化剂在含氧含水气氛的N2O分解反应中表现出了较高的活性。  相似文献   

19.
制备了(Ni+Co)/Al=3、Ni/Co=0.2(原子比)的NiCoAl三元类水滑石样品,焙烧获得NiCoAl复合氧化物,表面浸渍K2CO3溶液制备了K改性催化剂,用于N2O分解反应,考察了K负载量、焙烧温度等制备参数和O2、H2O等反应气氛对催化剂活性的影响。用BET、XRD、H2-TPR、XPS等技术表征了催化剂的组成结构。结果表明,K的表面改性提高了催化剂对N2O分解反应的催化活性,其中,400℃预焙烧NiCoAl类水滑石制得复合氧化物,初湿浸渍K2CO3溶液,K的负载量为K/(Ni+Co)=0.05,400℃ 再焙烧制备的催化剂活性较高,有氧有水条件下500℃ 反应时N2O可完全分解;在NiCoAl复合氧化物表面负载K2CO3组分,降低了催化剂表面Co、Ni元素的电子结合能,弱化了表面Co-O、Ni-O化学键,从而提高了催化剂活性和抗水性能。  相似文献   

20.
Ce-Zn-O mixed oxides were prepared by amorphous citrate process and decomposition of the corresponding acetate precursors. The resulting materials were characterised by TGA, XRD, UV-Vis-DRS, EPR, SEM and surface area measurements. XRD and DRS results indicated fine dispersion of the ceria component in the ZnO matrix. EPR results clearly indicate the presence of oxygen vacancy and defect centres in the composite oxide. Addition of CeO2 to ZnO produced mixed oxides of high surface area compared to the pure ZnO. Hydrogen transfer reaction was carried out on these catalytic materials to investigate the effect of rare earth oxide on the activity of ZnO. Addition of ceria into zinc oxide was found to increase the catalytic activity for hydrogen transfer reaction. The catalytic activity also depended on the method of preparation. Citrate process results in uniformly dispersed mixed oxide with higher catalytic activity. Dedicated to Professor C N R Rao on his 70th birthday  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号