Recent progress in biphasic catalytic systems using ionic liquids

Catalytic reactions in two liquid phases containing ionic liquids (ILs), in which organic reactions proceed in the ILs phase and products are extracted to the other liquid phase, are efficient and environmentally benign. This short review briefly reports the development of catalytic application in biphasic systems containing ILs in the last two years. Recent progress for the functionalization of ILs themselves and combinations of homogeneous and heterogeneous catalysts with ILs are described. Prospects and future challenges are also addressed.     

Ionic liquids in microemulsions: Formulation and characterization

In the last few decades ionic liquids (ILs) have been widely considered as a “green solvents” and they are used in various fields. ILs can be used in the formation of microemulsion as a dispersed medium, polar domain and recently as a surfactant. In this particular review our discussion is about the novel IL-based aqueous and non-aqueous microemulsions which are quite fascinating and interesting research field for scientists. Synthesis of double and triple chain containing surface active ionic liquid (SAILs) and formation of microemulsion as a surfactant with ILs as a polar core have been elaborated in this review. ILs with a certain surface activity having long alkyl chain substituents can self-aggregate and form ILs microemulsion with high-temperature stability and temperature insensitivity. Characterization of these ILs in oil microemulsion and different ultrafast processes which are performed inside these characterized systems are documented very well. We have highlighted the similarities and differences between the nonaqueous microemulsions and the aqueous microemulsions. Addition of water and effect of temperature are quite important in case of the ILs containing microemulsions.     

Application of ionic liquid in liquid phase microextraction technology

Ionic liquids (ILs) are novel nonmolecular solvents. Their unique properties, such as high thermal stability, tunable viscosity, negligible vapor pressure, nonflammability, and good solubility for inorganic and organic compounds, make them excellent candidates as extraction media for a range of microextraction techniques. Many physical properties of ILs can be varied, and the structural design can be tuned to impart the desired functionality and enhance the analyte extraction selectivity, efficiency, and sensitivity. This paper provides an overview of the applications of ILs in liquid phase microextraction technology, such as single‐drop microextraction, hollow fiber based liquid phase microextraction, and dispersive liquid–liquid microextraction. The sensitivity, linear calibration range, and detection limits for a range of target analytes in the methods were analyzed to determine the advantages of ILs in liquid phase microextraction.     

Ionic liquids: solvents and sorbents in sample preparation

The applications of ionic liquids (ILs) and IL‐derived sorbents are rapidly expanding. By careful selection of the cation and anion components, the physicochemical properties of ILs can be altered to meet the requirements of specific applications. Reports of IL solvents possessing high selectivity for specific analytes are numerous and continue to motivate the development of new IL‐based sample preparation methods that are faster, more selective, and environmentally benign compared to conventional organic solvents. The advantages of ILs have also been exploited in solid/polymer formats in which ordinarily nonspecific sorbents are functionalized with IL moieties in order to impart selectivity for an analyte or analyte class. Furthermore, new ILs that incorporate a paramagnetic component into the IL structure, known as magnetic ionic liquids (MILs), have emerged as useful solvents for bioanalytical applications. In this rapidly changing field, this Review focuses on the applications of ILs and IL‐based sorbents in sample preparation with a special emphasis on liquid phase extraction techniques using ILs and MILs, IL‐based solid‐phase extraction, ILs in mass spectrometry, and biological applications.     

Organometallic Ionic Liquids Containing Sandwich Complexes: Molecular Design,Physical Properties,and Chemical Reactivities

Ionic liquids (ILs) are salts with low melting points and are useful as electrolytes and solvents. We have developed ILs containing cationic metal complexes, which form a family of functional liquids that exhibit unique physical properties and chemical reactivities originating from metal complexes. Our study explores the liquid chemistry in the field of coordination chemistry, where solid-state chemistry is currently the main focus. This review describes the molecular design, physical properties, and reactivities of organometallic ILs containing sandwich or half-sandwich complexes. This paper mainly covers stimuli-responsive ILs, whose magnetic properties, solvent polarities, colors, or structures change by the application of external fields, such as light, heat, and magnetic fields, or by reaction with coordinating molecules.     

Syntheses and characterization of few bio-ionic liquids comprising of cholinium cation and plant derived carboxylic acids as anions

Due to the increasing trend to use ionic liquids (ILs) for number of applications, it is of utmost importance to ensure non toxicity of the solvent systems which may contaminate the processed products. The reported toxicity of several imidazolium based ionic liquids posed a need to develop bio based ILs for various applications which are due to their bio-origin are bio compatible, nontoxic and biodegradable. Herein eleven bio-based ionic liquids were prepared using acid moieties available in various plants and characterized. Although some of the ILs were used to separate antibodies such as IgG from rat serum in the form of aqueous biphasic systems but to find their direct application for material preparation and food applications, herein rheological behavior of the ILs were investigated. The choline based IL containing coumarine-3-carboxylate was found to have highest zero shear viscosity while the IL with D-(−)-quinate was found to have the lowest. The viscoelastic behavior of the ionic liquids established anion dependent viscous and liquid like behavior of the ionic liquids. Interestingly the ILs showed viscosity independent ion conductivity. Due to the high conductivity, stable physical state and bio-origin such ILs have the potential for applications in electrochemistry, food and material science.     

Task-specific microextractions using ionic liquids

Ionic liquids (ILs) have been the focus of many scientific investigations including the field of analytical microextractions. ILs have many advantages over traditional organic solvents making them excellent candidates as extraction media for a variety of microextraction techniques. Many physical properties of ILs can be varied, and the structural design and make-up can be tuned to impart desired functionality for enhancement of analyte extraction selectivity, efficiency, and sensitivity. This paper provides a brief overview of ionic liquids and highlights trends in three important sample-preparation techniques, namely, single drop microextraction, solid-phase microextraction, and dispersive liquid–liquid microextraction in terms of performing task-specific extractions using these highly versatile solvents.     

Formation and tribological properties of two‐component ultrathin ionic liquid films on Si

Several single‐component and two‐component imidazolium ionic liquids (ILs) ultrathin films were formed on Si substrates by a dip‐coating and heat treatment process. The formation and surface properties of the films were analyzed by means of ellipsometric thickness measurement, X‐ray photoelectron spectra and atomic force microscope. The adhesive and nanotribological behaviors of the films were evaluated by a homemade colloidal probe. A ball‐on‐plate tribometer was used to test the microtribological performances of these films. As a result, the two‐component ILs ultrathin film containing 80% solid‐like ILs phase shows more homogenous surface morphologies and optimal micro/nano‐tribological properties as compared to single‐component ILs films, which is ascribed to a synergic effect between the steady solid‐like ILs phase as the backbone and the proper amount of flowable liquid‐like ILs phase. By studying the influence of various solid/liquid ILs ratios on tribological properties of the two‐component ILs films, we might find the way to design ILs films with excellent comprehensive tribological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Ionic liquids in separations of azeotropic systems – A review

Efforts to make existing separation methods more efficient and eco-friendly may get a boost from the use of a relatively new class of compounds known as ionic liquids (ILs). The separation of azeotropic mixtures has conventionally been one of the most challenging tasks in industrial processes due to the fact that their separation by simple distillation is basically impossible.This paper provides a critical review of methods using ILs as azeotrope breakers. Three separation processes were addressed: liquid–liquid extraction, extractive distillation, and supported liquid membranes. We examine the azeotrope breaking potential of ILs and compare their performance to that of conventional solvents. A systematic analysis of the influence of the structure of ILs on their azeotrope breaking capacity contributes to the establishment of guidelines for selecting the most suitable ILs for the separation of specific azeotropic mixtures.     

Liquid range temperature of ionic liquids as potential working fluids for absorption heat pumps

The liquid range temperature of six ionic liquids (ILs) was determined in this work with the aim to propose suitable absorbents for heat pump systems. The selected ILs have three different cations, imidazolium, pyridinium and choline and each was combined with four different anions [NTf₂]⁻, [OTf]⁻, [MeSO₃]⁻ and [BETI]⁻. The lower limit, given by solid − liquid transitions, was determined using differential scanning calorimetry (DSC). The upper limit is given by the degradation temperature. This temperature is determined using thermogravimetric technique (TGA). Dynamic and isothermal methods have been combined to estimate the maximum operation temperature. ILs ageing effect was also analysed in this work.     

CO2/离子液体体系热力学性质的分子动力学模拟

超临界CO2和离子液体(ILs)是两种绿色溶剂. 离子液体可以溶解超临界CO2, 而超临界CO2不能溶解离子液体. 由此设计构成的CO2/IL二元系统, 同时具备了超临界CO2和离子液体的许多优点: 既可以降低离子液体的粘度, 还便于相分离, 是新型的耦合绿色溶剂. 其物理化学性质对于设计反应、分离等过程非常重要. 因此, 本文以CO2/IL二元系统为研究对象, 通过选择合适的分子力场和系综, 运用分子动力学(MD)模拟方法研究了CO2/[bmim][PF6]、CO2/[bmim][NO3]等体系的热力学性质. 结果表明, CO2对ILs膨胀度的影响非常小, 当CO2摩尔分数为0.5时, ILs膨胀仅为15%. CO2/ILs的扩散系数远小于CO2膨胀甲醇、乙醇溶液的扩散系数. 随着CO2含量的增加, ILs的扩散系数提高, 粘度显著下降, 表明CO2能有效地改善ILs扩散性, 减小其粘度. 因此CO2可用以改善离子液体溶剂体系的传递特性, 增强反应分离过程在其中的进行.     

Metal-containing ionic liquids and ionic liquid crystals based on imidazolium moiety

Ionic liquids and ionic liquid crystals of imidazolium salts composed of various transition and main group metals have been reviewed. Ionic metal complexes of imidazoles and N-heterocyclic carbenes possess the similar properties were also included. These types of ILs and ILCs have been realized as potential solvents, catalysts, catalyst precursors and reagents for many organic transformations and provide ecofriendly protocols. They have also been found to play key roles in material science. Many of these IL systems are air- and moisture stable and are considered as alternatives for air- and moisture sensitive chloroaluminate-based ILs.     

How a Transition‐Metal(II) Chloride Interacts with a Eutectic AlCl3‐Based Ionic Liquid: Insights into the Speciation of the Electrolyte and Electrodeposition of Magnetic Materials

Electrostatic interactions are characteristic of ionic liquids (ILs) and play a pivotal role in determining the formation of species when solutes are dissolved in them. The formation of new species/complexes has been investigated for certain ILs. However, such investigations have not yet focused on eutectic liquids, which are a promising class of ILs. These liquids (or liquid coordination complexes, LCCs) are rather new and are composed of cationic and anionic chloro complexes of metals. To date, these liquids have been employed as electrolytes to deposit metals and as solvents for catalysis. The present study deals with a liquid that is prepared by mixing a 1.2:1 mol ratio of AlCl₃ and 1‐butylpyrrolidine. An attempt has been made to understand the interactions of FeCl₂ with the organic molecule using spectroscopy. It was found that dissolved Fe(II) species interact mainly with the IL anion and such interactions can lead to changes in the cation of the electrolyte. Furthermore, the viability of depositing thick magnetic films of Fe and Fe–Al has been explored.     

Investigation of physicochemical properties of lactam-based Brønsted acidic ionic liquids

Novel lactam-cation-based Br?nsted acid ionic liquids (ILs) were prepared through a simple and atom-economic neutralization reaction between a lactam, such as caprolactam and butyrolactam, and a Br?nsted acid, HX, where X is BF4-, CF3COO-, phCOO-, ClCH2COO-, NO3-, or H2PO4-. The density, viscosity, acidic scale, electrochemical window, temperature dependency of ionic conductivity, and thermal property of these ILs were measured and investigated in detail. The results show that protonated caprolactam tetrafluoroborate (CPBF) has a relatively strong acidity with -0.22 of Hammett acidic scale H0 and caprolactam trifluoroacetate (CPTFA) and pyrrolidonium trifluoroacetate (PYTFA) ILs possess very low viscosities, that is, 28 cP and 11 cP, respectively. An investigation of thermal property showed that a wide liquid range (up to -90 degrees C), moderate thermal stability (up to 249 degrees C for 10% of decomposition), and complex polymorphism were observed in these ILs. In comparison to imidazolium-cation-based ILs, the lactam-cation-based Br?nsted acid ILs have a relatively lower cost, lower toxicity, and comparable ion conductivity and heat storage density (more than 200 MJ/m3). They have wide applicable perspectives for fuel cell devices, thermal transfer fluids, and acid-catalyzed reaction media and catalysts as replacements of conventional inorganic acids.     

Ionic Liquids Can Permanently Modify Porous Silicon Surface Chemistry

To develop ionic liquid/porous silicon (IL/pSi) microarrays we have contact pin‐printed 20 hydrophobic and hydrophilic ionic liquids onto as‐prepared, hydrogen‐passivated porous silicon (ap‐pSi) and then determined the individual IL spot size, shape and associated pSi surface chemistry. The results reveal that the hydrophobic ionic liquids oxidize the ap‐pSi slightly. In contrast, the hydrophilic ionic liquids lead to heavily oxidized pSi (i.e., ox‐pSi). The strong oxidation arises from residual water within the hydrophilic ILs that is delivered from these ILs into the ap‐pSi matrix causing oxidation. This phenomenon is less of an issue in the hydrophobic ILs because their water solubility is substantially lower.     

Synthesis and Thermophysical Properties of Ether‐Functionalized Sulfonium Ionic Liquids as Potential Electrolytes for Electrochemical Applications

During this work, a novel series of hydrophobic room temperature ionic liquids (ILs) based on five ether functionalized sulfonium cations bearing the bis{(trifluoromethyl)sulfonyl}imide, [NTf₂]^? anion were synthesized and characterized. Their physicochemical properties, such as density, viscosity and ionic conductivity, electrochemical window, along with thermal properties including phase transition behavior and decomposition temperature, have been measured. All of these ILs showed large liquid range temperature, low viscosity, and good conductivity. Additionally, by combining DFT calculations along with electrochemical characterization it appears that these novel ILs show good electrochemical stability windows, suitable for the potential application as electrolyte materials in electrochemical energy storage devices.     

Analytical developments and applications of ionic liquids for environmental studies

Ionic liquids (ILs) are considered advanced solvents with interesting properties that have led to remarkable improvements in the performance of analytical methods and their practical application. Analytical chemistry has profited from the evolution of ILs in diverse contexts, ranging from their applications in microextractions to uses as matrices for mass spectrometric determinations. Their use in sample preparation has meant significant improvements in terms of miniaturization and analytical performance, and given place to new techniques based on liquid-liquid and solid-phase extractions; the latter greatly driven forward by the combination of ILs with nanomaterials. Furthermore, electrodes have been prepared by combining ILs with different modern materials, significantly improving the sensitivity and selectivity of electroanalytical methods. Moreover, the implementation of ILs as additives to mobile and stationary phases in separation techniques has been proved to improve liquid and gas chromatography, as well as capillary electrophoresis, in terms of the number of analytes that can be efficiently separated and of the useful life of columns, representing also a promising alternative to environmentally dangerous organic solvents. Additionally, their application as matrix modifiers and as ion-pairing additives has introduced their use in mass spectrometry. In this review, the design and implementation of innovative and highly efficient analytical methods based on ILs for the sensitive and selective determination of diverse analytes in environmental matrices is described. Critical issues that have arisen from their application and future challenges in electrochemical, separation and preconcentration techniques based on these solvents are also presented.     

A functionalised ionic liquid: 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride

An ionic liquid (IL) containing an appended 3-chloro-2-hydroxypropyl functionality group 1-(3-chloro-2-hydroxypropyl)-3-methyl imidazolium chloride was synthesised by the reaction of N-methyl imidazole, hydrochloric acid and epichlorohydrin. The ionic liquid showed reasonably high conductivity and heat stability up to 230°C. Its structures were characterised by FT-IR, ¹H NMR and ¹³C NMR spectra. The physical characteristics of the ionic liquid, such as conductivity and solvation abilities have been investigated. Due to its high polarity, the IL is able to dissolve many inorganic salts, and due to hydroxyl-rich microenvironment, it is able to dissolve cellulose go up to 10 (wt%). The ILs can be used for synthesising other ILs or polyelectrolyte.