Molecular Vise Approach to Create Metal‐Binding Sites in MOFs and Detection of Biomarkers

We report a new approach to create metal‐binding site in a series of metal–organic frameworks (MOFs), where tetratopic carboxylate linker, 4′,4′′,4′′′,4′′′′‐methanetetrayltetrabiphenyl‐4‐carboxylic acid, is partially replaced by a tritopic carboxylate linker, tris(4‐carboxybiphenyl)amine, in combination with monotopic linkers, formic acid, trifluoroacetic acid, benzoic acid, isonicotinic acid, 4‐chlorobenzoic acid, and 4‐nitrobenzoic acid, respectively. The distance between these paired‐up linkers can be precisely controlled, ranging from 5.4 to 10.8 Å, where a variety of metals, Mg²⁺, Al³⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺ and Pb²⁺, can be placed in. The distribution of these metal‐binding sites across a single crystal is visualized by 3D tomography of laser scanning confocal microscopy with a resolution of 10 nm. The binding affinity between the metal and its binding‐site in MOF can be varied in a large range (observed binding constants, K_obs from 1.56×10² to 1.70×10⁴ L mol^?1), in aqueous solution. The fluorescence of these crystals can be used to detect biomarkers, such as cysteine, homocysteine and glutathione, with ultrahigh sensitivity and without the interference of urine, through the dissociation of metal ions from their binding sites.     

Molecular Pivot‐Hinge Installation to Evolve Topology in Rare‐Earth Metal–Organic Frameworks

Linker desymmetrization has been witnessed as a powerful design strategy for the discovery of highly connected metal–organic frameworks (MOFs) with unprecedented topologies. Herein, we introduce molecular pivot‐hinge installation as a linker desymmetrization strategy to evolve the topology of highly connected rare‐earth (RE) MOFs, where a pivot group is placed in the center of a linker similar to a hinge. By tuning the composition of pivot groups and steric hindrances of the substituents on various linker rotamers, MOFs with various topologies can be obtained. The combination of L‐SO₂ with C_2v symmetry and 12‐connected RE₉ clusters leads to the formation of a fascinating (4,12)‐c dfs new topology. Interestingly, when replacing L‐SO₂ with a tetrahedra linker L‐O, the stacking behaviors of RE‐organic layers switch from an eclipsed mode to a staggered stacking mode, leading to the discovery of an intriguing hjz topology. Additionally, the combination of the RE cluster and a linker [(L‐(CH₃)₆)] with more bulky groups gives rise to a flu topology with a new 8‐c inorganic cluster. The diversity of these RE‐MOFs was further enhanced through post‐synthetic installation of linkers with various functional groups. Functionalization of each linker with acidic and basic units in the mesoporous RE‐based PCN‐905‐SO₂ allows for efficient cascade catalytic transformation within the functionalized channels.     

Functionalization of Zirconium‐Based Metal–Organic Layers with Tailored Pore Environments for Heterogeneous Catalysis

Intriguing properties and functions are expected to implant into metal–organic layers (MOLs) to achieve tailored pore environments and multiple functionalities owing to the synergies among multiple components. Herein, we demonstrate a facile one‐pot synthetic strategy to incorporate multiple functionalities into stable zirconium MOLs via secondary ligand pillaring. Through the combination of Zr₆‐BTB (BTB=benzene‐1,3,5‐tribenzoate) layers and diverse secondary ligands (including ditopic and tetratopic linkers), 31 MOFs with multi‐functionalities were systematically prepared. Notably, a metal–phthalocyanine fragment was successfully incorporated into this Zr‐MOL system, giving rise to an ideal platform for the selective oxidation of anthracene. The organic functionalization of two‐dimensional MOLs can generate tunable porous structures and environments, which may facilitate the excellent catalytic performance of as‐synthesized materials.     

Flexible Zirconium Metal‐Organic Frameworks as Bioinspired Switchable Catalysts

Flexible metal–organic frameworks (MOFs) are highly desirable in host–guest chemistry owing to their almost unlimited structural/functional diversities and stimuli‐responsive pore architectures. Herein, we designed a flexible Zr‐MOF system, namely PCN‐700 series, for the realization of switchable catalysis in cycloaddition reactions of CO₂ with epoxides. Their breathing behaviors were studied by successive single‐crystal X‐ray diffraction analyses. The breathing amplitudes of the PCN‐700 series were modulated through pre‐functionalization of organic linkers and post‐synthetic linker installation. Experiments and molecular simulations confirm that the catalytic activities of the PCN‐700 series can be switched on and off upon reversible structural transformation, which is reminiscent of sophisticated biological systems such as allosteric enzymes.     

Self‐Generation of Surface Roughness by Low‐Surface‐Energy Alkyl Chains for Highly Stable Superhydrophobic/Superoleophilic MOFs with Multiple Functionalities

We transformed the hydrophilic metal–organic framework (MOF) UiO‐67 into hydrophobic UiO‐67‐R s (R=alkyl) by introducing alkyl chains into organic linkers, which not only protected hydrophilic Zr₆O₈ clusters to make the MOF interspace superoleophilic, but also led to a rough crystal surface beneficial for superhydrophobicity. The UiO‐67‐R s displayed high acid, base, and water stability, and long alkyl chains offered better hydrophobicity. Good hydrophobicity/oleophilicity were also possible with mixed‐ligand MOFs containing metal‐binding ligands. Thus, a (super)hydrophobic MOF catalyst loaded with Pd centers efficiently catalyzed Sonogashira reactions in water at ambient temperature. Studies of the hydrophobic effects of the coordination interspace and the outer surface suggest a simple de novo strategy for the synthesis of superhydrophobic MOFs that combine surface roughness and low surface energy. Such MOFs have potential for environmentally friendly catalysis and water purification.     

Intrinsic White‐Light‐Emitting Metal–Organic Frameworks with Structurally Deformable Secondary Building Units

The secondary building units in metal–organic frameworks (MOFs) are commonly well‐defined metal–oxo clusters or chains with very limited structural strain. Herein, the structurally deformable haloplumbate units that are often observed in organolead halide perovskites have been successfully incorporated into MOFs. The resultant materials are a rare class of isoreticular MOFs exhibiting large Stokes‐shifted broadband white‐light emission, which is probably induced by self‐trapped excitons from electron–phonon coupling in the deformable, zigzag [Pb₂X₃]⁺ (X=Cl, Br, or I) chains. In contrast, MOFs with highly symmetric, robust haloplumbate chains only exhibit narrow UV–blue photoemission. The designed MOF‐based intrinsic white‐light photoemitters have a number of advantages over hybrid inorganic–organic perovskites in terms of stability and tunability, including moisture resistance, facile functionalization of photoactive moieties onto the organic linkers, introduction of luminescent guests.     

Metal–Organic Framework (MOF) Compounds: Photocatalysts for Redox Reactions and Solar Fuel Production

Metal–organic frameworks (MOFs) are crystalline porous materials formed from bi‐ or multipodal organic linkers and transition‐metal nodes. Some MOFs have high structural stability, combined with large flexibility in design and post‐synthetic modification. MOFs can be photoresponsive through light absorption by the organic linker or the metal oxide nodes. Photoexcitation of the light absorbing units in MOFs often generates a ligand‐to‐metal charge‐separation state that can result in photocatalytic activity. In this Review we discuss the advantages and uniqueness that MOFs offer in photocatalysis. We present the best practices to determine photocatalytic activity in MOFs and for the deposition of co‐catalysts. In particular we give examples showing the photocatalytic activity of MOFs in H₂ evolution, CO₂ reduction, photooxygenation, and photoreduction.     

Versatile Tailoring of Paddle‐Wheel ZnII Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations

A new tetracarboxylate ligand having short and long arms formed 2D layer Zn^II coordination polymer 1 with paddle‐wheel secondary building units under solvothermal conditions. The framework undergoes solvent‐specific single crystal‐to‐single crystal (SC‐SC) transmetalation to produce 1_Cu . With a sterically encumbered dipyridyl linker, the same ligand forms non‐interpenetrated, 3D, pillared‐layer Zn^II metal–organic framework (MOF) 2 , which takes part in SC‐SC linker‐exchange reactions to produce three daughter frameworks. The parent MOF 2 shows preferential incorporation of the longest linker in competitive linker‐exchange experiments. All the 3D MOFs undergo complete SC‐SC transmetalation with Cu^II, whereby metal exchange in different solvents and monitoring of X‐ray structures revealed that bulky solvated metal ions lead to ordering of the shortest linker in the framework, which confirms that the solvated metal ions enter through the pores along the linker axis.     

Tailor‐Made Metal–Organic Frameworks from Functionalized Molecular Building Blocks and Length‐Adjustable Organic Linkers by Stepwise Synthesis

In this work, we have demonstrated a family of diamondoid metal–organic frameworks (MOFs) based on functionalized molecular building blocks and length‐adjustable organic linkers by using a stepwise synthesis strategy. We have successfully achieved not only “design” and “control” to synthesize MOFs, but also the functionalization of both secondary building units (SBUs) and organic linkers in the same MOF for the first time. Furthermore, the results of N₂ and H₂ adsorption show that their surface areas and hydrogen uptake capacities are determined by the most optimal combination of functional groups from SBUs and organic linkers, interpenetration, and free volume in this system. A member of this series, DMOF‐6 exhibits the highest surface area and H₂ adsorption capacity among this family of MOFs.     

A Computational and Experimental Approach Linking Disorder,High‐Pressure Behavior,and Mechanical Properties in UiO Frameworks

Whilst many metal–organic frameworks possess the chemical stability needed to be used as functional materials, they often lack the physical strength required for industrial applications. Herein, we have investigated the mechanical properties of two UiO‐topology Zr‐MOFs, the planar UiO‐67 ([Zr₆O₄(OH)₄(bpdc)₆], bpdc: 4,4′‐biphenyl dicarboxylate) and UiO‐abdc ([Zr₆O₄(OH)₄(abdc)₆], abdc: 4,4′‐azobenzene dicarboxylate) by single‐crystal nanoindentation, high‐pressure X‐ray diffraction, density functional theory calculations, and first‐principles molecular dynamics. On increasing pressure, both UiO‐67 and UiO‐abdc were found to be incompressible when filled with methanol molecules within a diamond anvil cell. Stabilization in both cases is attributed to dynamical linker disorder. The diazo‐linker of UiO‐abdc possesses local site disorder, which, in conjunction with its longer nature, also decreases the capacity of the framework to compress and stabilizes it against direct compression, compared to UiO‐67, characterized by a large elastic modulus. The use of non‐linear linkers in the synthesis of UiO‐MOFs therefore creates MOFs that have more rigid mechanical properties over a larger pressure range.     

A Computational and Experimental Approach Linking Disorder,High‐Pressure Behavior,and Mechanical Properties in UiO Frameworks

Whilst many metal–organic frameworks possess the chemical stability needed to be used as functional materials, they often lack the physical strength required for industrial applications. Herein, we have investigated the mechanical properties of two UiO‐topology Zr‐MOFs, the planar UiO‐67 ([Zr₆O₄(OH)₄(bpdc)₆], bpdc: 4,4′‐biphenyl dicarboxylate) and UiO‐abdc ([Zr₆O₄(OH)₄(abdc)₆], abdc: 4,4′‐azobenzene dicarboxylate) by single‐crystal nanoindentation, high‐pressure X‐ray diffraction, density functional theory calculations, and first‐principles molecular dynamics. On increasing pressure, both UiO‐67 and UiO‐abdc were found to be incompressible when filled with methanol molecules within a diamond anvil cell. Stabilization in both cases is attributed to dynamical linker disorder. The diazo‐linker of UiO‐abdc possesses local site disorder, which, in conjunction with its longer nature, also decreases the capacity of the framework to compress and stabilizes it against direct compression, compared to UiO‐67, characterized by a large elastic modulus. The use of non‐linear linkers in the synthesis of UiO‐MOFs therefore creates MOFs that have more rigid mechanical properties over a larger pressure range.     

Sequential Transformation of Zirconium(IV)‐MOFs into Heterobimetallic MOFs Bearing Magnetic Anisotropic Cobalt(II) Centers

Heterometallic metal–organic frameworks (MOFs) allow the precise placement of various metals at atomic precision within a porous framework. This new level of control by MOFs promises fascinating advances in basic science and application. However, the rational design and synthesis of heterometallic MOFs remains a challenge due to the complexity of the heterometallic systems. Herein, we show that bimetallic MOFs with MX₂(INA)₄ moieties (INA=isonicotinate; M=Co²⁺ or Fe²⁺; X=OH^?, Cl^?, Br^?, I^?, NCS^?, or NCSe^?) can be generated by the sequential modification of a Zr‐based MOF. This multi‐step modification not only replaced the linear organic linker with a square planar MX₂(INA)₄ unit, but also altered the symmetry, unit cell, and topology of the parent structure. Single‐crystal to single‐crystal transformation is realized so that snapshots for transition process were captured by successive single‐crystal X‐ray diffraction. Furthermore, the installation of Co(NCS)₂(INA)₄ endows field‐induced slow magnetic relaxation property to the diamagnetic Zr‐MOF.     

Alkali Phosphonate Metal–Organic Frameworks

A new family of porous metal–organic frameworks (MOFs), namely alkali phosphonate MOFs, is reported. [Na₂Cu(H₄TPPA)] ⋅ (NH₂(CH₃)₂)₂ ( GTUB-1 ) was synthesized using the tetratopic 5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin ( H₈-TPPA ) linker with planar X-shaped geometrical core. GTUB-1 is composed of rectangular void channels with BET surface area of 697 m² g⁻¹. GTUB-1 exhibits exceptional thermal stability. The toxicity analysis of the ( H₈-TPPA ) linker indicates that it is well tolerated by an intestinal cell line, suggesting its suitability for creating phosphonate MOFs for biological applications.     

Highly Stable Mesoporous Zirconium Porphyrinic Frameworks with Distinct Flexibility

The construction of highly stable metal–porphyrinic frameworks (MPFs) is appealing as these materials offer great opportunities for applications in artificial light‐harvesting systems, gas storage, heterogeneous catalysis, etc. Herein, we report the synthesis of a novel mesoporous metal–porphyrinic framework (denoted as NUPF‐1) and its catalytic properties. NUPF‐1 is constructed from a new porphyrin linker and a Zr₆O₈ structural building unit, possessing an unprecedented doubly interpenetrating scu net. The structure exhibits not only remarkable chemical and thermal stabilities, but also a distinct structural flexibility, which is seldom seen in metal–organic framework (MOF) materials. By the merit of high chemical stability, NUPF‐1 could be easily post‐metallized with [Ru₃(CO)₁₂], and the resulting {NUPF‐1–RuCO} is catalytically active as a heterogeneous catalyst for intermolecular C(sp³)?H amination. Excellent yields and good recyclability for amination of small substrates with various organic azides have been achieved.     

From Metal–Organic Frameworks to Single‐Atom Fe Implanted N‐doped Porous Carbons: Efficient Oxygen Reduction in Both Alkaline and Acidic Media

It remains highly desired but a great challenge to achieve atomically dispersed metals in high loadings for efficient catalysis. Now porphyrinic metal–organic frameworks (MOFs) have been synthesized based on a novel mixed‐ligand strategy to afford high‐content (1.76 wt %) single‐atom (SA) iron‐implanted N‐doped porous carbon (Fe_SA‐N‐C) via pyrolysis. Thanks to the single‐atom Fe sites, hierarchical pores, oriented mesochannels and high conductivity, the optimized Fe_SA‐N‐C exhibits excellent oxygen reduction activity and stability, surpassing almost all non‐noble‐metal catalysts and state‐of‐the‐art Pt/C, in both alkaline and more challenging acidic media. More far‐reaching, this MOF‐based mixed‐ligand strategy opens a novel avenue to the precise fabrication of efficient single‐atom catalysts.     

MOFs – Metallorganische Gerüststrukturen. Funktionale poröse Materialien

MOFs (metal‐organic frameworks) have developed into an important class of materials. This is due to their potential application in the fields of catalysis, gas storage, nanoreactors, or drug release. MOFs are comprised of isolated metal ions or metal‐oxygen clusters, chains or layers, which are connected via organic linkers to form three‐dimensional frameworks of outstanding porosity. Owing to their modular assembly, the pores of MOFs can be tailored using functionalized linkers, following the principle of reticular chemistry.     

A PCP Pincer Ligand for Coordination Polymers with Versatile Chemical Reactivity: Selective Activation of CO2 Gas over CO Gas in the Solid State

A tetra(carboxylated) PCP pincer ligand has been synthesized as a building block for porous coordination polymers (PCPs). The air‐ and moisture‐stable PCP metalloligands are rigid tetratopic linkers that are geometrically akin to ligands used in the synthesis of robust metal–organic frameworks (MOFs). Here, the design principle is demonstrated by cyclometalation with Pd^IICl and subsequent use of the metalloligand to prepare a crystalline 3D MOF by direct reaction with Co^II ions and structural resolution by single crystal X‐ray diffraction. The Pd?Cl groups inside the pores are accessible to post‐synthetic modifications that facilitate chemical reactions previously unobserved in MOFs: a Pd?CH₃ activated material undergoes rapid insertion of CO₂ gas to give Pd?OC(O)CH₃ at 1 atm and 298 K. However, since the material is highly selective for the adsorption of CO₂ over CO, a Pd?N₃ modified version resists CO insertion under the same conditions.     

Design,Synthesis, and X‐Ray Crystal Structure of a Fullerene‐Linked Metal–Organic Framework

Given the unique structural and electronic properties of C₆₀, metal–organic frameworks (MOFs) containing C₆₀ linkers are expected to exhibit interesting characteristics. A new hexakisfullerene derivative possessing two pairs of phenyl pyridine groups attached to two methano‐carbon atoms located at the trans‐1 positions was designed and synthesized. The four pyridyl nitrogen atoms define a perfectly planar rectangle. This new C₆₀ derivative was used to assemble the first fullerene‐linked two‐dimensional MOF by coordination with Cd²⁺.     

Design,Synthesis, and X‐Ray Crystal Structure of a Fullerene‐Linked Metal–Organic Framework

Given the unique structural and electronic properties of C₆₀, metal–organic frameworks (MOFs) containing C₆₀ linkers are expected to exhibit interesting characteristics. A new hexakisfullerene derivative possessing two pairs of phenyl pyridine groups attached to two methano‐carbon atoms located at the trans‐1 positions was designed and synthesized. The four pyridyl nitrogen atoms define a perfectly planar rectangle. This new C₆₀ derivative was used to assemble the first fullerene‐linked two‐dimensional MOF by coordination with Cd²⁺.     

Theoretical Insights into the Tuning of Metal Binding Sites of Paddlewheels in rht‐Metal–Organic Frameworks

Theoretical investigations of CO₂ sorption are performed in four members of the highly tunable rht‐metal–organic framework (MOF) platform. rht‐MOFs contain two Cu²⁺ ions that comprise the metal paddlewheels and both are in chemically distinct environments. Indeed, one type of Cu²⁺ ion faces toward the center of the linker whereas the other type faces away from the center of the linker. Electronic structure calculations on the series of rht‐MOFs demonstrate that one of the Cu²⁺ ions has a consistently higher charge magnitude relative to the other. As a consequence, the Cu²⁺ ion with the higher partial positive charge acts as the favored sorbate binding site at initial loading as revealed by grand canonical Monte Carlo (GCMC) simulations that include many‐body polarization. It was found that the charge distribution about the copper paddlewheels is dependent on the type of functional groups present on the linker. This study demonstrates how the binding site about the metal paddlewheels in the rht‐MOF platform can be controlled by changing the functionality on the organic ligand.