γ-A12O3改性对AlCl3/γ-Al2O3催化剂性能的影响

本文中,采用HCl和NaOH改性 γ-A12O3载体制备AlCl3/γ-A12O3固载催化剂,用吡啶-FTIR和吡啶-TPD技术分析了催化剂的表面酸性(酸中心类型、酸强度和酸量),并以1-癸烯齐聚作为探针反应,研究了催化剂的稳定性以及催化剂对聚合反应的影响。结果表明,催化剂含有两种酸类型,即Lewis酸和Brönsted酸,与未改性的催化剂相比,氢氧化钠改性载体制备的催化剂,酸量增大了47%,催化剂催化1-癸烯的齐聚反应活性增加了11.4%;而经盐酸改性制备的催化剂酸量增大112%,催化剂的活性增加了33.6%。酸强度依AlCl3/γ-A12O3,AlCl3/γ-Al2O3(NaOH),AlCl3/γ-Al2O3(HCl)的顺序增强。     

γ-A1_2O_3改性对AlCl_3/γ-Al_2O_3催化剂性能的影响（英文）

采用HCl和NaOH改性γ-A12O3载体制备AlCl3/γ-A12O3固载催化剂,用吡啶-FTIR和吡啶-TPD技术分析了催化剂的表面酸性(酸中心类型、酸强度和酸量),并以1-癸烯齐聚作为探针反应,研究了催化剂的稳定性以及催化剂对聚合反应的影响.结果表明,催化剂含有两种酸类型,即Lewis酸和Brnsted酸,与未改性的催化剂相比,氢氧化钠改性载体制备的催化剂,酸量增大了47%,催化剂催化1-癸烯的齐聚反应活性增加了11.4%;而经盐酸改性制备的催化剂酸量增大112%,催化剂的活性增加了33.6%.酸强度依AlC l3/γ-A12O3,AlC l3/γ-Al2O3(NaO H),AlC l3/γ-Al2O3(HCl)的顺序增强.     

焙烧温度对CuO/γ-Al2O3和CeO2-CuO/γ-Al2O3催化剂NO还原活性的影响

用浸渍法制备了CuO/γ-Al2O3催化剂和CeO2改性的CeO2-CuO/γ-Al2O3催化剂,考察了焙烧温度对CuO/γ-Al2O3和CeO2-CuO/γ-Al2O3催化剂C3H6还原NO反应活性的影响,以及CeO2的添加量对CeO2-CuO/γ-Al2O3催化剂C3H6还原NO反应活性的影响。结果表明,在200 ℃～500 ℃的焙烧温度范围内,焙烧温度对CuO/γ-Al2O3催化剂的活性影响很小；在500 ℃～800 ℃的焙烧温度范围内,随着焙烧温度的升高CuO/γ-Al2O3催化剂的活性急剧下降,由XRD物相测定结果可知,归因于对反应表现惰性的尖晶石CuAl2O4相的生成。当焙烧温度为500 ℃时,CeO2的添加对CuO/γ-Al2O3催化剂的活性影响很小；当焙烧温度为800 ℃时,CeO2的添加对CuO/γ-Al2O3催化剂有明显的助催化作用,当Ce和Cu的摩尔比为1∶10时,NO转化率较为理想。     

新型Ni-Mo/Al2O3加氢脱硫催化剂的研究

采用溶胶凝胶技术,制备了双结构Al2O3载体,用此改性载体制备了Ni-Mo/Al2O3催化剂,在中压固定床微反装置上考察了载体改性对催化剂上噻吩加氢脱硫(HDS)活性的影响,并用X射线粉末衍射、透射电镜、吡啶-红外光谱等分析方法对改性载体和催化剂进行了表征。结果表明,由铝溶胶改性载体制备催化剂的加氢脱硫活性均高于未改性载体制备的催化剂的催化活性。XRD和TEM结果表明氧化铝表面负载的铝溶胶经过干燥、焙烧后以纳米尺度的η-Al2O3状态存在,吡啶-红外光谱结果表明,改性氧化铝载体制备催化剂的弱B酸和弱L酸的酸量均提高,强L酸的酸量也明显增加。酸性、酸量的提高和纳米尺度η-Al2O3的存在是催化剂活性提高的主要原因。     

TiO2-Al2O3复合氧化物负载NiMo加氢脱硫催化剂的研究

采用溶胶凝胶技术，从Al2O3载体的表面改性出发，制备了TiO2-Al2O3复合载体。采用此改性载体制备了NiMo／TiO2-Al2O3催化剂；用中压固定床微反装置考察了载体改性对制备的催化剂的噻吩加氢脱硫(HDS)活性的影响．用透射电镜、NH3-TPD及吡啶红外光谱法对改性载体和催化剂进行了表征．结果表明，经钛溶胶改性的载体制备的催化剂与原有载体制备的催化剂相比，催化剂活性提高了20％．改性载体表面负载的钛溶胶以纳米尺寸的TiO2微粒形态存在．     

CeO2稳定Ru/γ-Al2O3湿空气氧化催化剂的研究

用CeO2作添加剂，对以γ-Al2O3为载体、RuO2为活性组成分的Ru/Al2O3湿空气氧化催化剂掺杂改性，用分步浸渍的方法制备出Ru/CeO2/Al2O3三元复合氧化物催化剂。经XRD分析，证明CeO2进入了γ-Al2O3的晶格，并且有效抑制了高温时γ-Al2O3向α-Al2O3的相变及RuO2向γ-Al2O3晶格的渗入，在270℃、5.5MPa条件下，对苯酚的催化氧化降解结果表明，CeO2的加入可明显提高催化剂活性，其中Ru:CeO2:Al2O3(质量比)=0.6：6：100的催化剂性能最佳，反应30min，苯酚的去除率为96.0％。     

CuO-Ag2O/γ-Al2O3催化剂的TPR特性及氧化活性研究

采用程序升温还原技术(TPR)研究CuO-Ag2O/γ-Al2O3双组分及其单组分催化剂的还原特性以及热处理温度对其还原性能的影响。发现不同负载量的Cuo-Ag2O/γ-Al2O3催化剂的还原特性有明显差异, 反映出催化剂表面存在着不同种类的铜物种。Ag2O的存在, 使催化剂的TPR峰位与单组分CuO/γ-Al2O3的TPR曲线产生明显差异, 还原峰发生位移, 随Ag2O添加量的增加, 位移增大。对苯的完全氧化反应结果表明, 催化剂的氧化活性次序为:CuO-Ag2O/γ-Al2O3>CuO/γ-Al2O3>Ag2O/γ-Al2O3。热处理温度升高, 使催化剂表面铜物种分散状态及其还原性能发生变化。从500~900℃, 存在一个使铜物种达到最佳分散态的温度。讨论了负载于γ-Al2O3载体上的CuO-Ag2O双组分及其单组分催化剂在还原过程中金属与载体, 金属与金属间的相互作用以及热处理温度对其还原性能的影响。     

镍盐前体对Ni/γ-Al2O3催化剂催化加氢活性的影响

用X射线衍射、紫外-可见漫反射光谱、程序升温还原、CO化学吸附和微反应测试等方法研究了不同镍盐前体制备的负载型Ni/γ-Al2O3催化剂的结构和催化α-蒎烯加氢活性.结果表明,用醋酸镍前体制备的催化剂的催化加氢活性远高于用硝酸镍前体制备的催化剂,并且这种催化加氢活性的差异与不同前体制备的Ni O/γ-Al2O3样品表面Ni2 的分散状态及还原度密切相关.当Ni2 负载量远低于其在γ-Al2O3载体表面上的分散容量时,Ni2 优先嵌入载体表面四面体空位,随着Ni2 负载量的增加,嵌入载体表面八面体空位的Ni2 的比例增大.由于醋酸根阴离子对γ-Al2O3载体表面四面体空位的屏蔽效应大于硝酸根阴离子,在醋酸镍前体制备的Ni O/γ-Al2O3样品表面,Ni2 倾向于嵌入载体表面八面体空位且易被还原为金属态Ni0,故用醋酸镍前体制备的Ni/γ-Al2O3催化剂的催化α-蒎烯加氢活性高于用硝酸镍前体制备的催化剂.     

浆态床二甲醚合成中V2O5、Sm2O3对脱水组分γ-Al2O3的修饰作用

采用等容浸渍法制备改性脱水催化剂，通过H2-TPR、Pyridine-IR、还原态NH3-TPD、XRD等表征手段，以及目标反应浆态床CO+H2合成二甲醚，研究了催化剂的还原性能以及酸中心分布与反应性能之间的关系。H2-TPR结果表明，在脱水催化剂γ-Al2O3、V2O5/γ-Al2O3和Sm2O3/γ-Al2O3上不出现还原峰，V2O5、Sm2O3的加入改善了复合催化剂中Cu的还原性能，促进了甲醇催化剂的还原。Pyridine-IR表明，V2O5和Sm2O3的加入对L酸、B酸的量影响不大。还原态NH3-TPD说明V2O5和Sm2O3的加入改变了酸中心的分布，增加了弱酸中心的比率。XRD结果发现，V2O5和Sm2O3均匀分散在γ-Al2O3上，没有新的物种生成。二甲醚合成目标反应的结果表明，改性后催化剂的反应活性增强，合成反应中CO转化率、二甲醚的选择性都得到提高。V2O5和Sm2O3的添加增加了弱酸中心数量，促进了脱水活性，从而提高了复合催化剂合成二甲醚的活性和选择性。     

CeO2-MOx（M=La^3＋,Ca^2＋）改性Pd/γ-Al2O3催化甲烷燃烧性能

采用沉积-沉淀法制备了固溶体CeO2-MOx=(M=La3+,Ca2+)改性的Pd/γ-Al2O3催化剂,利用XRD、Raman和XPS对催化剂进行了表征.结果表明,金属(M)离子进入CeO2的晶格,形成CeO2-MOx固溶体,Raman谱上463cm-1处对应于Ce-O键的F2g对称伸缩振动强度降低.其中,样品Pd/γ-Al2O3CeO2-CaO在615 cm-1处出现一小峰,样品Pd/γ-Al2O3-CeO2-La2O3在320cm-1处出现的肩峰,都表明固溶体CeO2-MOx的形成使O2-亚晶格结构对称性降低.XPS分析表明,固溶体改性的Pd/γ-Al2O3催化剂中Pd的3d5/2结合能比正常价态的PdO的结合能高出0.5-0.6 eV,形成了一种高度离子化的.与载体具有强相互作用的Pd物种.催化甲烷燃烧实验证明,固溶体CeO2-MOx(M=La3+,Ca2+)改性的Pd/γ-Al2O3催化剂的低温活性和稳定性均高于未经改性的Pd/γ-Al2O3催化剂和仅用CeO2改性的Pd/γAl2O3催化剂,在空速为50000 h-1时,可使1%CH4-99%空气(体积分数)混合气中甲烷的10%转化温度降至254℃,转化率100%时的转化温度降至340℃.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.