A Multifunctional Bimetallic Molecular Device for Ultrasensitive Detection,Naked‐Eye Recognition,and Elimination of Cyanide Ions

A new bimetallic Fe^II–Cu^II complex was synthesized, characterized, and applied as a selective and sensitive sensor for cyanide detection in water. This complex is the first multifunctional device that can simultaneously detect cyanide ions in real water samples, amplify the colorimetric signal upon detection for naked‐eye recognition at the parts‐per‐million (ppb) level, and convert the toxic cyanide ion into the much safer cyanate ion in situ. The mechanism of the bimetallic complex for high‐selectivity recognition and signaling toward cyanide ions was investigated through a series of binding kinetics of the complex with different analytes, including CN^?, SO₄^2?, HCO₃^?, HPO₄^2?, N₃^?, CH₃COO^?, NCS^?, NO₃^?, and Cl^? ions. In addition, the use of the indicator/catalyst displacement assay (ICDA) is demonstrated in the present system in which one metal center acts as a receptor and inhibitor and is bridged to another metal center that is responsible for signal transduction and catalysis, thus showing a versatile approach to the design of new multifunctional devices.     

Reaction‐Based Ratiometric Chemosensor for Instant Detection of Cyanide in Water with High Selectivity and Sensitivity

A highly selective chemosensor 1 based on an acylhydrazone group as binding site and naphthalene group as the fluorescence signal group were described, which could instantly detect CN^? in water with specific selectivity and high sensitivity. The detection of cyanide was performed via the nucleophilic attack of cyanide anion on the carbonyl group, which could be confirmed by ¹H NMR, ¹³C NMR, ESI‐MS and DFT calculations. The addition of CN^? to sensor 1 induced a remarkable color change from colorless to yellow and generated a blue fluorescence, these sense procedure could not interfered by other coexistent competitive anions (F^?, Cl^?, Br^?, I^?, AcO^?, H₂PO₄^?, HSO₄^?, ClO₄^?, SCN^?, S^2?, NO₃^? and SO₄^2?). The detection limits were 5.0×10^?7 M and 2.0×10^?9 M of CN^? using the visual fluorescent color changes and fluorescence spectra changes respectively, which is far lower than the WHO guideline of 1.9×10^?6 M . Test strips based on sensor 1 were fabricated, which could act as a convenient and efficient CN^? test kit to detect CN^? in pure water for “in‐the‐field” measurement.     

C3i‐Symmetric Octanuclear Cadmium Cages: Double‐Anion‐Templated Synthesis,Formation Mechanism,and Properties

A series of C_3i‐symmetric bicapped trigonal antiprismatic Cd₈ cages [2X@Cd₈L₆(H₂O)₆] ? n Y ? solvents (X=Cl^?, Y=NO₃^?, n=2: MOCC‐4 ; X=Br^?, Y=NO₃^?, n=2: MOCC‐5 ; X=NO₃^?, Y=NO₃^?, n=2: MOCC‐6 ; X=NO₃^?, Y=BF₄^?, n=2: MOCC‐7 ; X=NO₃^?, Y=ClO₄^?, n=2: MOCC‐8 ; X=CO₃^2?, n=0: MOCC‐9 ), doubly anion templated by different anions, were solvothermally synthesized by means of a flexible ligand. Interestingly, the CO₃^2? template for MOCC‐9 was generated in situ by two‐step decomposition of DMF solvent. For other MOCCs, spherical or trigonal monovalent anions could also play the role of template in their formation. The template abilities of these anions in the formation of the cages were experimentally studied and are discussed for the first time. Anion exchange of MOCC‐8 was carried out and showed anion‐size selectivity. All of the cage‐like compounds emit strong luminescence at room temperature.     

Pyridinium‐Fused Pyridinone: A Novel “Turn‐on” Fluorescent Chemodosimeter for Cyanide

A new chemodosimeter based on pyridinium‐fused pyridinone iodide ( PI ) has been obtained through a “clean reaction” method. This compound can detect CN^? in aqueous solution with a high selectivity and rapid response. The detection of CN^? occurs through the nucleophilic attack of CN^? on the C?N bond, which induces the destruction of the π‐conjugation on the pyridinium ring. Support of this detection mechanism was obtained by ¹H NMR titration, HR‐MS, and DFT calculations. Upon the addition of 10 equivalents CN^? to a solution of PI in THF/H₂O (1:1, v/v), a 57‐fold enhancement in fluorescence intensity was observed at the maximum emission wavelength of 457 nm. Meanwhile, the maximum absorption wavelength was also blue‐shifted from 447 nm to 355 nm. Other common anions such as BF₄^?, PF₆^?, F^?, Cl^?, Br^?, I^?, H₂PO₄^?, ClO₄^?, CH₃COO^?, NO₂^?, N₃^?, and SCN^? had little effect on the detection of CN^?. The response time of PI for CN^? was less than 5 seconds. The detection limit was calculated to be 5.4×10^?8 M , which is lower than the maximum permission concentration in drinking water (1.9 μM ) set by the World Health Organization (WHO).     

Abiotic C?C bond formation under environmental conditions: Kinetics of the aldol condensation of acetaldehyde in water catalyzed by carbonate ions (CO32−)

The role of C? C bond‐forming reactions such as aldol condensation in the degradation of organic matter in natural environments is receiving a renewed interest because naturally occurring ions, ammonium ions, NH⁺₄, and carbonate ions, CO₃^2?, have recently been reported to catalyze these reactions. While the catalysis of aldol condensation by OH^? has been widely studied, the catalytic properties of carbonate ions, CO₃^2?, have been little studied, especially under environmental conditions. This work presents a study of the catalysis of the aldol condensation of acetaldehyde in aqueous solutions of sodium carbonate (0.1–50 mM) at T = 295 ± 2 K. By monitoring the absorbance of the main product, crotonaldehyde, instead of that of acetaldehyde, interferences from other reaction products and from side reactions, in particular a known Cannizzaro reaction, were avoided. The rate constant was found to be first order in acetaldehyde in the presence of both CO₃^2? and OH^?, suggesting that previous studies reporting a second order for this base‐catalyzed reaction were flawed. Comparisons between the rate constants in carbonate solutions and in sodium hydroxide solutions ([NaOH] = 0.3–50 mM) showed that, among the three bases present in carbonate solutions, CO₃^2?, HCO₃^?, and OH^?, OH^? was the main catalyst for pH ≤ 11. CO₃^2? became the main catalyst at higher pH, whereas the catalytic contribution of HCO₃^? was negligible over the range of conditions studied (pH 10.3–11.3). Carbonate‐catalyzed condensation reactions could contribute significantly to the degradation of organic matter in hyperalkaline natural environments (pH ≥ 11) and be at the origin of the macromolecular matter found in these environments. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 676–686, 2010     

Substituent effects on the Bergman cyclization of (Z)‐1,5‐hexadiyne‐3‐enes: a systematic computational study

The effects of several substituents (? BH₂, ? BF₂, ? AlH₂, ? CH₃, ? C₆H₅, ? CN, ? COCH₃, ? CF₃, ? SiH₃, ? NH₂, ? NH₃⁺, ? NO₂, ? PH₂, ? OH, ? OH₂⁺, ? SH, ? F, ? Cl, ? Br) on the Bergman cyclization of (Z)‐1,5‐hexadiyne‐3‐ene (enediyne, 3 ) were investigated at the Becke–Lee–Yang–Parr (BLYP) density functional (DFT) level employing a 6‐31G* basis set. Some of the substituents (? NH₃⁺, ? NO₂, ? OH, ? OH₂⁺, ? F, ? Cl, ? Br) are able to lower the barrier (up to a minimum of 16.9 kcal mol^?1 for difluoro‐enediyne 7rr ) and the reaction enthalpy (the cyclization is predicted to be exergonic for ? OH₂⁺ and ? F) compared to the parent system giving rise to substituted 1,4‐dehydrobenzenes at physiological temperatures. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1605–1614, 2001     

A highly selective chemosensor derived from benzamide hydrazones for the detection of cyanide ion in organic and organic-aqueous media: design,synthesis, sensing and computational studies

ABSTRACT

A new, highly sensitive and selective chemosensing method has been developed for the detection of cyanide ion using benzamide hydrazone receptors (R1-R4). The sensing ability of these compounds towards CN^? in the presence of Br ^?, HSO₄ ^?, Cl^?, OH^?, I^?, F^?, AcO^?, NO₂ ^? and NO₃ ^? in DMF and DMF-Aqueous mixture (DMF:H₂O, 9:1 v/v) was investigated. The binding characteristics of the probe with cyanide ions carried out by ¹ H NMR titrations indicated the deprotonation of N-H group through H-bond interactions between benzamide hydrazones and cyanide ions; it has been theoretically supported by DFT. The binding constant (Ka) and stoichiometry of the host–guest complex formed was calculated by the Benesi–Hildebrand (B–H) plot, and strong interaction of the probe with CN^- ions forming a 1:2 binding stoichiometry has been noted in this study. In a DMF and aqueous medium for CN^? ion, the lower limit of detection (LOD in ppm) is compared to the limit of quantification (LOQ in ppm), which is quite better in terms of sensitivity.     

Controlled Synthesis of Heterotrimetallic Single‐Chain Magnets from Anisotropic High‐Spin 3 d–4 f Nodes and Paramagnetic Spacers

By using the node‐and‐spacer approach in suitable solvents, four new heterotrimetallic 1D chain‐like compounds (that is, containing 3d–3d′–4f metal ions), {[Ni(L)Ln(NO₃)₂(H₂O)Fe(Tp*)(CN)₃] ? 2 CH₃CN ? CH₃OH}_n (H₂L=N,N′‐bis(3‐methoxysalicylidene)‐1,3‐diaminopropane, Tp*=hydridotris(3,5‐dimethylpyrazol‐1‐yl)borate; Ln=Gd ( 1 ), Dy ( 2 ), Tb ( 3 ), Nd ( 4 )), have been synthesized and structurally characterized. All of these compounds are made up of a neutral cyanide‐ and phenolate‐bridged heterotrimetallic chain, with a {? Fe? C?N? Ni(? O? Ln)? N?C? }_n repeat unit. Within these chains, each [(Tp*)Fe(CN)₃]^? entity binds to the Ni^II ion of the [Ni(L)Ln(NO₃)₂(H₂O)]⁺ motif through two of its three cyanide groups in a cis mode, whereas each [Ni(L)Ln(NO₃)₂(H₂O)]⁺ unit is linked to two [(Tp*)Fe(CN)₃]^? ions through the Ni^II ion in a trans mode. In the [Ni(L)Ln(NO₃)₂(H₂O)]⁺ unit, the Ni^II and Ln^III ions are bridged to one other through two phenolic oxygen atoms of the ligand (L). Compounds 1 – 4 are rare examples of 1D cyanide‐ and phenolate‐bridged 3d–3d′–4f helical chain compounds. As expected, strong ferromagnetic interactions are observed between neighboring Fe^III and Ni^II ions through a cyanide bridge and between neighboring Ni^II and Ln^III (except for Nd^III) ions through two phenolate bridges. Further magnetic studies show that all of these compounds exhibit single‐chain magnetic behavior. Compound 2 exhibits the highest effective energy barrier (58.2 K) for the reversal of magnetization in 3d/4d/5d–4f heterotrimetallic single‐chain magnets.     

Base hydrolysis of (αβ S)-(o-methoxy benzoato) (tetraethylenepentamine) cobalt(III) ion: A comparative study of the role of ion pairs and micelles

The kinetics of base hydrolysis of (αβ S)-(o -methoxy benzoato) (tetraethylenepentamine)cobalt(III) obeyed the rate law: k_obs = k_OH[OH^?], in the range 0.05 ? [OH^?]_T, mol dm^?3 ? 1.0, I = 1.0 mol dm^?3, and 20.0–40.0°C. At 25°C, k_OH = 13.4 ± 0.4 dm³ mol^?1 s^?1, ΔH^≠ = 93 ± 2 kJ mol^?1 and ΔS^≠ = 90 ± 5 JK^?1 mol^?1. Several anions of varying charge and basicity, CH₃CO₂^?, SO₃^2?, SO₄^2?, CO₃^2?, C₂O₄^2?, CH₂(CO₂)₂^2?, PO₄^3?, and citrate^3? had no effect on the rate while phthalate^2?, NTA^3?, EDTA^4?, and DTPA^5? accelerated the process via formation of the reactive ion pairs. The anionic (SDS), cationic (CTAB), and neutral (Triton X-100) micelles, however, retarded the reaction, the effect being in the order SDS> CTAB > Triton X-100. The importance of electrostatic and hydrophobic effects of the micelles on the selective partitioning of the reactants between the micellar and bulk aqueous pseudo-phases which control the rate are discussed. © 1994 John Wiley & Sons, Inc.     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

Reaction‐Based Colorimetric and Ratiometric Fluorescence Sensor for Detection of Cyanide in Aqueous Media

A stilbene‐based compound ( 1 ) has been prepared and was highly selective for the detection of cyanide anion in aqueous media even in the presence of other anions, such as F^?, Cl^?, Br^?, I^?, ClO₄^?, H₂PO₄^?, HSO₄^?, NO₃^?, and CH₃CO₂^?. A noticeable change in the color of the solution, along with a prominent fluorescence enhancement, was observed upon the addition of cyanide. The color change was observed upon the nucleophilic addition of the cyanide anion to the electron‐deficient cyanoacrylate group of 1 . The spectral changes induced by the reaction were analyzed by comparison with two model compounds, such as compound 2 with dimethyl substituents and compound 3 without a cyanoacrylate group. An intramolecular charge‐transfer (ICT) mechanism played a key role in the sensing properties, and the mechanism was supported by DFT/TDDFT calculations.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Catalytic Reduction of CN−, CO,and CO2 by Nitrogenase Cofactors in Lanthanide‐Driven Reactions

Nitrogenase cofactors can be extracted into an organic solvent to catalyze the reduction of cyanide (CN^?), carbon monoxide (CO), and carbon dioxide (CO₂) without using adenosine triphosphate (ATP), when samarium(II) iodide (SmI₂) and 2,6‐lutidinium triflate (Lut‐H) are employed as a reductant and a proton source, respectively. Driven by SmI₂, the cofactors catalytically reduce CN^? or CO to C₁–C₄ hydrocarbons, and CO₂ to CO and C₁–C₃ hydrocarbons. The C? C coupling from CO₂ indicates a unique Fischer–Tropsch‐like reaction with an atypical carbonaceous substrate, whereas the catalytic turnover of CN^?, CO, and CO₂ by isolated cofactors suggests the possibility to develop nitrogenase‐based electrocatalysts for the production of hydrocarbons from these carbon‐containing compounds.     

Synthetic and Structural Studies on Copper 1 H‐[1,10]‐Phenanthrolin‐2‐one Coordination Complexes: Isolation of a Novel Intermediate During 1,10‐Phenanthroline Hydroxylation

The synthesis and crystal structure elucidation of a novel dinuclear heteroleptic copper(II) complex has led to an alternative mechanism in the formation of covalent hydrates. During further studies on the synthesis and properties of [Cu₂(ophen)₂] ( 1 ), a dinuclear complex of copper(I) with 1 H‐[1,10]‐phenanthrolin‐2‐one (Hophen), two intermediates/alternative products 2 and 3 were isolated. The dinuclear, antiferromagnetic complex [Cu₂(ophen)₂(phen)₂] ? (NO₃)₂ ? 9H₂O ( 3 , phen=1,10‐phenanthroline) contains two five‐coordinate copper(II) ions, both with trigonal‐bipyramidal coordination, which are bridged together through deprotonated hydroxyl groups with a Cu? Cu non‐bonding distance of 3.100 Å. Complex [Cu(phen)₂(H₂O)] ? (NO₃)₂ ( 2 ) is a polymorph of a previously reported material. The occurrence of 2 and 3 has led us to propose a variation to the Gillard mechanism for the formation of covalent hydrates in bidentate N‐heterocycles in which the attacking nucleophile may be the deprotonated form of 2 , [Cu(phen)₂(OH)]^?, rather than free OH^?.     

Visible Light Excitable SCN− Selective Fluorescence Probe Derived from Thiophene

An efficient fluorescence probe, 4‐methyl‐2,6‐bis((thiophen‐2‐ylmethylimino)methyl)phenol (DFPTMA) and its SCN^? adduct has been synthesized and characterized by different spectroscopic techniques like ¹H NMR,¹³C NMR, QTOF‐MS ES⁺, UV‐Vis and FTIR spectroscopy. Single crystal X‐ray structure of DFPTMA is reported. In presence of SCN^?, DFPTMA exhibits significant fluorescence enhancement (λ_Ex, 455 nm, λ_Em, 504 nm) in aqueous methanol (water‐methanol, 1:4, V/V, 0.1 mol/L HEPES buffer, pH 7.4). Common bio‐relevant anions viz. CH₃COO^?, NO₂^?, NO₃^?, Cl^?, Br^?, I^?, SO₄^2?, HSO₄^?, N₃^?, HAsO₄^2?, Cr₂O₇^2?, H₂PO₄^?, ClO₄^?, NCO^?, CN^?, CO₃^2?, F^?, PO₄^3?, S^2?, HS^? do not interfere in the recognition of SCN^?. Lowest detection limit for SCN^? is 0.88 µmol/L with response time <5 min. The SCN^? assisted enhancement in emission intensity may be attributed to the formation of H‐bond which enhances the rigidity of the molecular assembly.     

Two C3‐Symmetric Dy3III Complexes with Triple Di‐μ‐methoxo‐μ‐phenoxo Bridges,Magnetic Ground State,and Single‐Molecule Magnetic Behavior

Two series of isostructural C₃‐symmetric Ln₃ complexes Ln₃ ? [BPh₄] and Ln₃ ? 0.33[Ln(NO₃)₆] (in which Ln^III=Gd and Dy) have been prepared from an amino‐bis(phenol) ligand. X‐ray studies reveal that Ln^III ions are connected by one μ₂‐phenoxo and two μ₃‐methoxo bridges, thus leading to a hexagonal bipyramidal Ln₃O₅ bridging core in which Ln^III ions exhibit a biaugmented trigonal‐prismatic geometry. Magnetic susceptibility studies and ab initio complete active space self‐consistent field (CASSCF) calculations indicate that the magnetic coupling between the Dy^III ions, which possess a high axial anisotropy in the ground state, is very weakly antiferromagnetic and mainly dipolar in nature. To reduce the electronic repulsion from the coordinating oxygen atom with the shortest Dy?O distance, the local magnetic moments are oriented almost perpendicular to the Dy₃ plane, thus leading to a paramagnetic ground state. CASSCF plus restricted active space state interaction (RASSI) calculations also show that the ground and first excited state of the Dy^III ions are separated by approximately 150 and 177 cm^?1, for Dy₃ ? [BPh₄] and Dy₃ ? 0.33[Dy(NO₃)₆], respectively. As expected for these large energy gaps, Dy₃ ? [BPh₄] and Dy₃ ? 0.33[Dy(NO₃)₆] exhibit, under zero direct‐current (dc) field, thermally activated slow relaxation of the magnetization, which overlap with a quantum tunneling relaxation process. Under an applied H_dc field of 1000 Oe, Dy₃ ? [BPh₄] exhibits two thermally activated processes with U_eff values of 34.7 and 19.5 cm^?1, whereas Dy₃ ? 0.33[Dy(NO₃)₆] shows only one activated process with U_eff=19.5 cm^?1.     

Early synthetic dyes – a challenge for tandem mass spectrometry

The present study concerns identification of early yellow synthetic dyes from silk fibers taken from the 1930 spring color palette of the Lyon Dyers’ Guild (La Chambre Syndicale des Teinturiers). The identification was based mainly on the electrospray ionization tandem mass spectrometry spectra obtained in the positive and negative ion modes. This technique was combined with high‐performance liquid chromatography, which enabled separation of the analyzed compounds. Spectra registered for each of the examined synthetic dye allowed identification of their lost fragments. Moreover, isotopic profiles and exact measurements of m/z by using time of flight analyzer made possible to evaluate their elemental composition. In consequence, all obtained data, including UV–vis spectra, allowed to reconstruct molecular structures of examined colorants. Due to the lack of standards, the identification of the dyes was based only on the registration of fragment and quasi‐molecular ions, what is rather uncommon in such analysis and means groping for the correct structure rather than proving signal identity by comparison with standards. Depending on substituents present in dye molecules, the lost fragments of the examined compounds involved SO₂, NO^?, NO₂^?, CH₄, C₂H₄, C₂H₅^?, C₂H₆, CH₂ = N–CH₃, (CH₃)₂NH, CH₂ = NH, CH₃–NH₂, as well as CO and CO₂. The performed study led to identification of various colorants: rhodamine 6 G, rhodamine B, malachite green, quinoline yellow, picric acid and acetoquinone yellow 5JZ. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,Characterization and Magnetic Studies of μ‐Oxamido Copper (II) ‐ Chromium (III) Heterodinuclear Complexes

Three new μ‐oxamido‐bridged heterodinuclear copper (II)‐chromium (III) complexes formulated [Cu(Me₂oxpn)Cr‐(L)₂](NO₃)₃, where Me₂oxpn denotes N,N'‐bis(3‐amino‐2, 2‐dimethylpropyl)oxamido dianion and L represents 5‐methyl‐1,10‐phenanthroline (Mephen), 4,7‐diphenyl‐1,10‐phenanthroline (Ph₂phen) or 2,2′‐bipyridine (bpy), have been synthesized and characterized by elemental analyses, IR and electronic spectral studies, magnetic moments of room‐temperature and molar conductivity measurements. It is proposed that these complexes have oxamido‐bridged structures consisting of planar copper (II) and octahedral chromium (III) ions. The variable temperature magnetic susceptibilities (4.2–300 K) of complexes [Cu(Me₂oxpn)Cr(Ph₂phen)₂](NO₃)₃ (1) and [Cu(Me₂oxpn)Cr(Mephen)₂] (NO₃)₃ (2) were further measured and studied, demonstrating the ferromagnetic interaction between the adjacent chromium (III) and copper (II) ions through the oxamido‐bridge in both complexes 1 and 2. Based on the spin Hamiltonian, ? = ‐ 2J?₁ · ?₂, the exchange integrals J were evaluated as + 21.5 an^?1 for 1 and + 22.8 cm^?1 for 2.     

Mass spectral fragmentation pattern of 2,2′-bipyridyls. Part VIII. 2,2′-Bipyridyl-5-carboxylic Acid and 2,2′-bipyridyl-5-sulphonic acid

The mass spectra of 2,2′-bipyridyl-5-carboxylic acid and 2,2′-bipyridyl-5-sulphonic acid obtained by electron impact are described. The principal initial fragmentation routes from the molecular ion of the carboxylic acid involve loss of CO, CN^˙, HCN, CO₂, OH^˙ and H₂O. From the molecular ion of the sulphonic acid the principal fragmentations are accompanied by loss of HCN, O₃, SO₂ and SO₃.     

Aroyleneimidazophenazine: A Sensitive Probe for Detecting CN− Anion and its Solvatochromism Effect

A novel electron‐deficient heteroacene 15H‐pyrazino[2″,3″:3′,4′]pyrrolo[1′,2′:1,2]imidazo[4,5‐b]phenazin‐15‐one ( 1 ) has been successfully synthesized and characterized. Compound 1 can selectively recognize CN^? and F^? over other 10 anions including BF₄^?, PF₆^?, Cl^?, SO₄^2?, NO₃^?, I^?, H₂PO₄^?, ClO₄^?, Ac^?, and Br^? in CHCl₃/DMF mixed solvents with dual responses, including absorption signals and fluorescent “turn‐off” effects. CN^? and F^? can be distinguished by the completely quenched fluorescence (for CN^?) and partially reduced fluorescence (for F^?). Especially, compound 1 exhibits higher sensitivity to CN^? than F^? with the response concentration as low as 5.0 × 10^?6 mol/L. Moreover, compound 1 shows very interesting solvatochromism effect, and the CHCl₃ solution of compound 1 is sensitive to triethylamine, and its emission could change from green to red upon the addition of triethylamine, which is attributed to the n–π intermolecular charge‐transfer interaction.