Helicity Induction and Memory of the Macromolecular Helicity in a Polyacetylene Bearing a Biphenyl Pendant

A novel, cis‐transoidal poly‐(phenylacetylene) bearing a carboxybiphenyl group as the pendant (poly‐ 1 ) was prepared by polymerization of (4′‐ethoxycarbonyl‐4‐biphenylyl)acetylene with a rhodium catalyst followed by hydrolysis of the ester groups. Upon complexation with various chiral amines and amino alcohols in dimethyl sulfoxide (DMSO), the polymer exhibited characteristic induced circular dichroism (ICD) in the UV/Vis region due to the predominantly one‐handed helix formation of the polymer backbone as well as an excess of a single‐handed, axially twisted conformation of the pendant biphenyl group. Poly‐ 1 complexed with (R)‐2‐amino‐1‐propanol showed unique time‐dependent inversion of the macromolecular helicity. Furthermore, the preferred‐handed helical conformation of poly‐ 1 induced by a chiral amine was further “memorized” after the chiral amine was replaced with achiral 2‐aminoethanol or n‐butylamine in DMSO. In sharp contrast to the previously reported memory in poly((4‐carboxyphenyl)acetylene), the present helicity memory of poly‐ 1 was accompanied by memory of the twisted biphenyl chirality in the pendants. Unprecedentedly, the helicity memory of poly‐ 1 with achiral 2‐aminoethanol was found to occur simultaneously with inversion of the axial chirality of the biphenyl groups followed by memory of the inverted biphenyl chirality, thus showing a significant change in the CD spectral pattern.     

Unexpected Thermally Stable,Cholesteric Liquid‐Crystalline Helical Polyisocyanides with Memory of Macromolecular Helicity

The achiral sodium salt of poly(4‐carboxyphenyl isocyanide) (poly‐ 1 –Na) folds into a one‐handed helix induced by optically active amines in water. The induced helicity remains when the optically active amines are completely removed, and further modification of the side groups to amide residues is possible without loss of memory of macromolecular helicity. Although the helical poly‐ 1 –Na loses its chiral memory at high temperature, helical polyisocyanides modified with achiral primary amines, which no longer have any chiral components, keep their memory perfectly even at 100 °C in N,N‐dimethylformamide in some cases and exhibit cholesteric liquid‐crystalline phases, thus providing a robust scaffold with heat resistance to which a variety of functional groups can be introduced.     

Asymmetric radical polymerization and copolymerization of N‐(1‐phenyldibenzosuberyl)methacrylamide and its derivative leading to optically active helical polymers

N‐(1‐Phenyldibenzosuberyl)methacrylamide (PDBSMAM) and its derivative N‐[(4‐butylphenyl)dibenzosuberyl]methacrylamide (BuPDBSMAM) were synthesized and polymerized in the presence of (+)‐ and (?)‐menthols at different temperatures. The tacticity of the polymers was estimated to be nearly 100% isotactic from the ¹H NMR spectra of polymethacrylamides derived in D₂SO₄. Poly(PDBSMAM) was not soluble in the common organic solvents, and its circular dichroism spectrum in the solid state was similar to that of the optically active poly(1‐phenyldibenzosuberyl methacrylate) (poly(PDBSMA)) with a prevailing one‐handed helicity, indicating that the poly(PDBSMAM) also has a similar helicity. Poly(BuPDBSMAM) was optically active and soluble in THF and chloroform. Its optical activity was much higher than that of the poly[N‐(triphenylmethayl)methacrylamide], suggesting that one‐handed helicity may be more efficiently induced on the poly(BuPDBSMAM). The copolymerization of BuPDBSMAM with a small amount of optically active N‐[(R)‐(+)‐1‐(1‐naphthyl)ethyl]methacrylamide, particularly in the presence of (?)‐menthol, produced a polymer with a high optical activity. The prevailing helicity may also be efficiently induced. The chiroptical properties of the obtained polymers were studied in detail. The chiral recognition by the polymers was also evaluated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1304–1315, 2007     

Macromolecular helicity inversion of poly(phenylacetylene) derivatives induced by various external stimuli

Unique macromolecular helicity inversion of stereoregular, optically active poly(phenylacetylene) derivatives induced by external achiral and chiral stimuli is briefly reviewed. Stereoregular, cis-transoidal poly(phenylacetylene)s bearing an optically active substituent, such as (1R,2S)-norephedrine (poly- 1 ) and β-cyclodextrin residues (poly- 2 ), show an induced circular dichroism (ICD) in the UV-visible region of the polymer backbone in solution due to a predominantly one-handed helical conformation of the polymers. However, poly- 1 undergoes a helix-helix transition upon complexation with chiral acids having an R configuration, and the complexes exhibit a dramatic change in the ICD of poly- 1 . Poly- 2 also shows the inversion of macromolecular helicity responding to molecular and chiral recognition events that occurred at the remote cyclodextrin residues from the polymer backbone; the helicity inversion is accompanied by a visible color change. A similar helix-helix transition of poly((R)- or (S)-(4-((1-(1-naphthyl)ethyl)carbamoyl)phenyl)acetylene) is also briefly described.     

Mechanism of helix induction on a stereoregular Poly((4-carboxyphenyl)acetylene) with chiral amines and memory of the macromolecular helicity assisted by interaction with achiral amines

Cis-transoidal poly((4-carboxyphenyl)acetylene) (poly-1) is an optically inactive polymer but forms an induced one-handed helical structure upon complexation with optically active amines such as (R)-(1-(1-naphthyl)ethyl)amine ((R)-2) in DMSO. The complexes show a characteristic induced circular dichroism (ICD) in the UV-visible region of the polymer backbone. Moreover, the macromolecular helicity of poly-1 induced by (R)-2 can be "memorized" even after complete replacement of (R)-2 by various achiral amines. We now report fully detailed studies on the mechanism of the helicity induction and memory of the helical chirality of poly-1 by means of UV-visible, CD, and infrared spectroscopies. We have found that a one-handed helix is cooperatively induced on poly-1 upon the ion pair formation of the carboxy groups of poly-1 with optically active amines and that the bulkiness of the chiral amines plays a crucial role for inducing an excess of a single-handed helix. On the other hand, the free ion formation was found to be essential for the macromolecular helicity memory of poly-1 after the replacement of the chiral amine by achiral amines, since the intramolecular electrostatic repulsion between the neighboring carboxylate ions of poly-1 significantly contributes to reduce the atropisomerization process of poly-1. On the basis of the mechanism of helicity induction and the memory of the helical chirality drawn from the present studies, we succeeded in creating an almost perfect memory of the induced macromolecular helicity of poly-1 with (R)-2 by using 2-aminoethanol as an achiral chaperoning molecule to assist in maintaining the memory of helical chirality.     

Synthesis and properties of optically active amino acid based polyacetylenes bearing eugenol and fluorene moieties

Novel optically active amino acid based polyacetylenes bearing eugenol and fluorene moieties were synthesized, and their properties, including chiroptical ones, were analyzed. N‐[1‐(3,4‐Dimethoxyphenyl)‐2‐propyloxycarbonyl]‐L ‐alanine N′‐propargylamide ( 1 ), N‐[1‐(3,4‐dimethoxyphenyl)‐2‐propyloxycarbonyl]‐L ‐alanine propargyl ester ( 2 ), N‐(9‐fluorenylmethoxycarbonyl)‐L ‐alanine N′‐propargylamide ( 3 ), and N‐(9‐fluorenylmethoxycarbonyl)‐L ‐alanine propargyl ester ( 4 ) were polymerized with a rhodium‐zwitterion catalyst in tetrahydrofuran to afford the corresponding polymers with moderate molecular weights ranging from 10,800 to 17,300 in good yields. Because of the large specific rotation and circular dichroism (CD) signal, it was concluded that the poly(N‐propargylamide)s [poly( 1 ) and poly( 3 )] took a helical structure with a predominantly one‐handed screw sense. The solvent and temperature could tune the helical structure of poly( 1 ). On the other hand, the poly(propargyl ester)s [poly( 2 ) and poly( 4 )] exhibited only small specific rotations and CD signals. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 810–819, 2006     

Radical polymerization of novel N‐substituted‐N‐vinylformamide derivatives with bulky chiral substitutents

A series of novel N‐substituted‐N‐vinylformamides were synthesized, and the effect of bulky substituents on their radical polymerizability and polymer structure were investigated. N‐(p‐Methoxybenzyl)‐N‐vinylformamide ( 3 ) and N‐cyclohexylmethyl‐N‐vinylformamide ( 4 ) generated polymers, while it was known that their N‐vinylacetamide derivatives did not. ¹H NMR and ¹³C NMR analyses of poly( 3 ), however, revealed almost no difference among the various polymerization conditions, implying that the substituent bulkiness did not influence the polymer structures. On the other hand, the chiral polymers, which were obtained by the radical polymerization of N‐(S)‐2‐methylbutyl‐N‐vinylformamide ((S)‐ 5 ) and N‐(S)‐2,3‐dihydroxypropyl‐N‐vinylformamide ((S)‐ 7 ) at 0 °C, showed sharper spectral patterns than those obtained at higher polymerization temperatures. Furthermore, the intensities of their positive cotton effects on circular dichroism increased when the polymerization temperature was low, suggesting that the substituent bulkiness of (S)‐ 5 and (S)‐ 7 influenced the polymer structures, such as their stereoregularity and regioregularity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Linear Free‐Energy Relationships Applied to the 13C NMR Chemical Shifts in 4‐Substituted N‐[1‐(Pyridine‐3‐ and ‐4‐yl)ethylidene]anilines

Two series of 4‐substituted N‐[1‐(pyridine‐3‐ and ‐4‐yl)ethylidene]anilines have been synthesized using different methods of conventional and microwave‐assisted synthesis, and linear free‐energy relationships have been applied to the ¹³C NMR chemical shifts of the carbon atoms of interest. The substituent‐induced chemical shifts have been analyzed using single substituent parameter and dual substituent parameter methods. The presented correlations describe satisfactorily the field and resonance substituent effects having similar contributions for C1 and the azomethine carbon, with exception of the carbon atom in para position to the substituent X. In both series, negative ρ values have been found for C1′ atom (reverse substituent effect). Quantum chemical calculations of the optimized geometries at MP2/6‐31G++(d,p) level, together with ¹³C NMR chemical shifts, give a better insight into the influence of the molecular conformation on the transmission of electronic substituent effects. The comparison of correlation results for different series of imines with phenyl, 4‐nitrophenyl, 2‐pyridyl, 3‐pyridyl, 4‐pyridyl group attached at the azomethine carbon with the results for 4‐substituted N‐[1‐(pyridine‐3‐ and ‐4‐yl)ethylidene]anilines for the same substituent set (X) indicates that a combination of the influences of electronic effects of the substituent X and the π₁‐unit can be described as a sensitive balance of different resonance structures.     

Highly Diastereo‐ and Enantioselective Michael Addition of Nitroalkanes to 2‐Enoyl‐Pyridine N‐Oxides Catalyzed by Scandium(III)/Copper(II) Complexes

A C₂‐symmetric Schiff‐base ligand, derived from tridentate‐Schiff‐base, was developed and successfully applied to the asymmetric Michael addition of nitroalkanes to 2‐enoyl‐pyridine N‐oxides. With this newly catalytic system, an unprecedented diastereoselectivity was obtained in the asymmetric Michael addition of nitroalkanes to 2‐enoyl‐pyridine N‐oxides. In addition, a switch in enantioselectivity was achieved by using this newly catalytic system and our previous catalyst. After a facile reduction, the optically active adduct was converted to a biologically active dihydro‐2H‐pyrrol 4 a . Furthermore, a connection of two tridentate‐Schiff‐base subunits proved to be an effective strategy in ligand design.     

Layer-by-layer assembly of charged poly(phenylacetylene)s with induced macromolecular helicity

The macromolecular helicity of charged poly(phenylacetylene)s induced by small chiral guests in water can be retained by the alternative deposition of achiral polyelectrolytes with opposite charges, resulting in optically active multilayer thin films with a macromolecular helicity memory.     

Induction of Single‐Handed Helicity of Polyacetylenes Using Mechanically Chiral Rotaxanes as Chiral Sources

Effective induction of preferred‐handed helicity of polyacetylenes by pendant mechanically chiral rotaxanes is discussed. Polyacetylenes possessing optically active mechanically chiral rotaxanes in the side chains were synthesized by the polymerization of the corresponding enantiopure [2]rotaxane‐type ethynyl monomers prepared by the chiral‐phase HPLC separations. The CD Cotton effects revealed that the polyacetylenes took preferred‐handed helical conformations depending on the rotaxane chirality. The preferred‐handed helix was not disturbed by an additional chiral substituent on the rotaxane side chain. These results demonstrate the significance and utility of mechanically chiral rotaxanes for the effective construction of asymmetric fields.     

Rh‐Catalyzed Reaction of Propargylic Alcohols with Aryl Boronic Acids–Switch from β‐OH Elimination to Protodemetalation

It is known that Rh‐catalyzed reaction of propargylic alcohols with aryl metallic reagents undergoes S_N2’‐type reaction affording allenes via a sequential arylmetalation and β‐OH elimination process. Here we report a Rh/Ag‐cocatalyzed reaction of propargylic alcohols with organoboronic acids affording stereo‐defined (E)‐3‐arylallylic alcohols via arylmetalation and protodemetalation with a high regio‐ and stereoselectivity under very mild conditions. The reaction exhibits a good substrate scope and the compatibility with synthetically useful functional groups with no racemization for optically active propargylic alcohols. Such a reaction may also be extended to homopropargylic alcohols with a remarkable regioselectivity and exclusive E‐stereoselectivity.     

Cooperative Catalysis: Enantioselective Propargylic Alkylation of Propargylic Alcohols with Enecarbamates Using Ruthenium/Phosphoramide Hybrid Catalysts

The diastereo‐ and enantioselective propargylic alkylation of propargylic alcohols with E‐enecarbamates in the presence of a catalytic amount of thiolate‐bridged diruthenium complexes bearing an optically active phosphoramide moiety gives the corresponding propargylic alkylated products (up to 97 % ee).     

Facile anionic synthesis of well‐defined block copolymers with pendent triphenylamine and ethynylpyridine for nonvolatile memory device applications with high performances

The sequential block copolymerization of 4,4′‐vinylphenyl‐N,N‐bis(4‐tert‐butylphenyl)benzenamine ( A ) with 2‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( B ) was simply carried out using only potassium naphthalenide (K‐Naph) as an initiator without any additives in tetrahydrofuran (THF) at ?78 °C. The well‐defined functional block copolymers containing A block as an electron donor and B block as a weak electron acceptor had predictable molecular weights (M_n = 8,800–14,500 g/mol) and narrow molecular weight distributions (M_w/M_n = 1.09–1.10). The bicontinuous microphase‐separated film morphology of the precisely synthesized poly( B ‐b‐ A ‐b‐ B ) (P BAB ) with 0.71 of f_{poly( A )}, formed by thermal annealing at 230 °C for 9 h, was expected to be a potential active layer for nonvolatile memory device applications. Indium tin oxide (ITO)/P BAB /aluminum (Al) memory devices with an 8 × 8 cross‐bar array structure exhibited nonvolatile resistive switching characteristics. The memory devices showed reliable memory performance in terms of ON/OFF ratios of ～10⁴, endurance cycles and retention time, and statistical data with regard to cumulative probability of the switching currents and threshold voltage distribution. Filamentary conduction mechanism was proposed to explain the switching of P BAB ‐based memory devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2625‐2632     

Novel poly(pyridine imide) with pendent naphthalene groups: Synthesis and thermal,optical, electrochemical,electrochromic, and protonation characterization

A new diamine containing a pyridine heterocyclic group and a naphthalene substituent, 4-(2-naphthyl)-2,6-bis(4-aminophenyl) pyridine (NBAPP), was synthesized with the Chichibabin reaction and used in the preparation of poly(pyridine imide) by direct polycondensation with 4,4′-hexafluoroisopropylidenediphathalic anhydride in N-methyl-2-pyrrolidinone (NMP). The poly(pyridine imide) derived from diamine NBAPP with naphthalene substituents was highly organosoluble: it was soluble in tetrahydrofuran, NMP, N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, and γ-butyrolactone at room temperature and in pyridine, dimethyl sulfoxide, and cyclohexanone upon heating at 70 °C. The poly(pyridine imide) was converted into lightly colored, optically transparent, flexible, and tough polyimide films via casting onto glass from a DMAc solution. This polymer exhibited good thermal stability (temperature of 10% weight loss = 527 °C) in air and high dielectric constants (as high as 4.20 at 1 kHz). The polyimide films had a tensile strength of 102 MPa and a tensile modulus of 1.8 GPa. As for the optical properties, the polymer exhibited UV–vis absorption bands in the region of 223–450 nm and possessed strong green-yellow fluorescence (500 nm) after being protonated with acid. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2367–2374, 2007     

Preparation and characterization of new thermally stable and optically active poly(ester‐imide)s by direct polycondensation with thionyl chloride in pyridine

4,4′‐hexafluoroisopropylidene‐2,2‐bis‐(phthalic acid anhydride) (1) was reacted with L ‐methionine (2) in acetic acid and the resulting N,N′–(4,4′‐hexafluoroisopropylidenediphthaloyl)‐bis‐L ‐methionine (4) was obtained in high yield. The direct polycondensation reaction of this diacid with several aromatic diols such as bisphenol A (5a), phenolphthalein (5b), 1,4‐dihydroxybenzene (5c), 4,4′‐dihydroxydiphenyl sulfide (5d), 4,6‐dihydroxypyrimidine (5e), 4,4′‐dihydroxydiphenyl sulfone (5f) and 2,4′‐dihydroxyacetophenone (5g) was carried out in a system of thionyl chloride and pyridine. Expecting that the reaction with thionyl chloride in pyridine might involve alternative intermediates different from an acyl chloride, the polycondensation at a higher temperature favorable for the reaction of the expected intermediate with nucleophiles was attempted, and a highly thermally stable poly(ester‐imide) was obtained by carrying out the reaction at 80°C. All of the above polymers were fully characterized by ¹H‐NMR, ¹⁹F‐NMR FT‐IR spectroscopy, elemental analysis and specific rotation. Some structural characterization and physical properties of these optically active poly(ester‐ imide)s are reported. Copyright © 2006 John Wiley & Sons, Ltd.     

Helix formation of poly(phenylacetylene) derivatives bearing amino groups at the meta position induced by optically active carboxylic acids

Two novel phenylacetylene derivatives bearing diethylaminomethyl groups at the meta position on phenyl groups [3‐(N,N‐diethylaminomethyl)phenyl]acetylene ( 1 ) and [3,5‐bis(N,N‐diethylaminomethyl)phenyl]acetylene ( 2 ) were synthesized and polymerized with [Rh(nbd)Cl]₂ (nbd: norbornadiene). Both monomers gave highly cis–transoidal stereoregular polymers that exhibited an induced circular dichroism (ICD) in the UV–visible region, probably because of a prevailing one‐handed helical conformation upon complexation with optically active carboxylic acids such as mandelic acid and lactic acid. The sign of the Cotton effects reflected the absolute configuration of the chiral acids. Therefore, these polymers can be used as a novel probe for determining the configuration of chiral acids. The polymers were stable in the presence of chiral acids in solution. The poly‐ 1 complexed with chiral acids exhibited a split‐type ICD, whereas the poly‐ 2 complexed with chiral acids showed a different, non‐split‐type ICD. The ICD pattern of the poly‐ 1 /chiral acids complexes dramatically changed with an increase in the concentration of the chiral acids, thus showing a non‐split‐type ICD similar to those of the poly‐ 2 /chiral acid complexes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3180–3189, 2001     

Methyl Iodide Accelerated Asymmetric Epoxidation of Alkenes Catalyzed by Chiral Salen-Mn（Ⅲ） Complexes with Tertiary Amine Units

A series of chiral salen-Mn（Ⅲ） complexes featuring two tertiary amine units were synthesized and employed in the enantioselective epoxidation of unfunctionalized alkenes in the presence of pyridine N-oxide and 2,6-dimethylpyridine N-oxide as proximal ligands, respectively. Moderate to high enantioselectivity and acceptable yields were achieved when NaClO was used as terminal oxidant under CH2Cl2/H2O biphasic media. Methyl iodide was found to be an effective additive to accelerate the epoxidation, possibly owing to the formation of quaternary ammonium units on catalysts, which may facilitate the reaction in an oil/water biphasic medium. The subsequent stimulation experiment was carried out, and the resulting ESI-HRMS analysis revealed the formation of a novel （salen）manganese（m） intermediate featuring two quaternary ammonium units, and bearing a pyridine N-oxide and a molecule of water simultaneously axially-coordinated backbone.     

Chirality sensing of chiral pyrrolidines and piperazines with a liquid crystalline dynamic helical poly(phenylacetylene) bearing ethyl phosphonate pendant groups

Stereoregular cis‐transoidal poly(phenylacetylene) bearing a phosphonic acid monoethyl ester as the pendant group (poly‐ 1 ‐H) was found to form a preferred‐handed helix upon complexation with various optically active pyrrolidines and piperazines in dilute dimethyl sulfoxide and water, and the complexes exhibited characteristic induced circular dichroisms (ICDs) in the UV‐vis region of the polymer backbone. The Cotton effect signs in water reflect the absolute configuration of the pyrrolidines. The sodium salt of poly‐ 1 ‐H (poly‐ 1 ‐Na) and poly‐ 1 ‐H in the presence of optically active amines formed lyotropic nematic and cholesteric liquid crystalline phases in concentrated water solutions, respectively, indicating the rigid‐rod characteristic of the polymer main chain regardless of the lack of a single‐handed helix, as evidenced by the long persistence length of about 18 nm before and after the preferred‐handed helicity induction in the polymer. X‐ray diffraction of the oriented films of the nematic and cholesteric liquid crystalline polymers exhibited almost the same diffraction pattern, suggesting that both polymers have the same helical structure; dynamically racemic and one‐handed helices, respectively. On the basis of the X‐ray analysis, a possible helical structure of poly‐ 1 is proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1383–1390, 2010     

Rapid metal‐free macromolecular coupling via In Situ nitrile oxide‐activated alkene cycloaddition

Nitrile oxide 1,3 dipolar cycloaddition is a simple and powerful coupling methodology. However, the self‐dimerization of nitrile oxides has prevented the widespread use of this strategy for macromolecular coupling. By combining an in situ nitrile oxide generation with a highly reactive activated dipolarophile, we have overcome these obstacles and present a metal‐free macromolecular coupling strategy for the modular synthesis of several ABA triblock copolymers. Nitrile oxides were generated in situ from chloroxime terminated poly(dimethylsiloxane) B‐blocks and coupled with several distinct hydrophilic (poly(2‐methyloxazoline) and poly(ethylene glycol)), and poly(N‐isopropylacrylamide) or hydrophobic (poly(l ‐lactide) A‐blocks terminated in activated dipolarophiles in a rapid fashion with high yield. This methodology overcomes many drawbacks of previously reported metal‐free methods due to its rapid kinetics, versatility, scalability, and ease of introduction of necessary functionality. Nitrile oxide cycloaddition should find use as an attractive macromolecular coupling strategy for the synthesis of biocompatible polymeric nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3134–3141