Supramolecular Fluorescence Resonance Energy Transfer in Nucleobase-Modified Fluorogenic RNA Aptamers

RNA aptamers form compact tertiary structures and bind their ligands in specific binding sites. Fluorescence-based strategies reveal information on structure and dynamics of RNA aptamers. Herein, we report the incorporation of the universal emissive nucleobase analog 4-cyanoindole into the fluorogenic RNA aptamer Chili, and its application as a donor for supramolecular FRET to the bound ligands DMHBI⁺ or DMHBO⁺. The photophysical properties of the new nucleobase–ligand-FRET pair revealed structural restraints for the overall RNA aptamer organization and identified nucleotide positions suitable for FRET-based readout of ligand binding. This strategy is generally suitable for binding-site mapping and may also be applied for responsive aptamer devices.     

Streptavidin binding bifunctional aptamers and their interaction with low molecular weight ligands

This paper describes the measurement of the binding affinities of two bifunctional RNA aptamers to their respective ligands. The aptamers comprise either a theophylline or malachite green binding sequence fused to a streptavidin binding sequence. These bifunctional aptamers are shown to bind simultaneously to both the small ligand and to streptavidin whether in free solution or on gold surfaces. Binding isotherms for both interactions were measured by different physiochemical techniques: surface plasmon resonance, fluorescence spectroscopy and dynamic light scattering. Both qualitatively and quantitatively there is little difference in binding affinities between the bifunctional aptamers and their monofunctional components. The respective K_d values for streptavidin binding in the monofunctional aptamer and in the theophylline bifunctional aptamer were 12 nM and 65 nM, respectively whilst the K_d values for theophylline binding in the monofunctional aptamer and the streptavidin bifunctional aptamer were 300 nM and 120 nM. These results are consistent with treating each aptamer sequence as a module that can be combined with others without significant loss of function. This allows for the use of streptavidin based immobilization strategies without either the cost of biotinylated dNTPs or the variable yields associated with the chemical biotinylation of RNA.     

Highly Specific Recognition of Guanosine Using Engineered Base-Excised Aptamers

Purines and their derivatives are highly important molecules in biology for nucleic acid synthesis, energy storage, and signaling. Although many DNA aptamers have been obtained for binding adenine derivatives such as adenosine, adenosine monophosphate, and adenosine triphosphate, success for the specific binding of guanosine has been limited. Instead of performing new aptamer selections, we report herein a base-excision strategy to engineer existing aptamers to bind guanosine. Both a Na⁺-binding aptamer and the classical adenosine aptamer have been manipulated as base-excising scaffolds. A total of seven guanosine aptamers were designed, of which the G16-deleted Na⁺ aptamer showed the highest bindng specificity and affinity for guanosine with an apparent dissociation constant of 0.78 mm . Single monophosphate difference in the target molecule was also recognizable. The generality of both the aptamer scaffold and excised site were systematically studied. Overall, this work provides a few guanosine binding aptamers by using a non-SELEX method. It also provides deeper insights into the engineering of aptamers for molecular recognition.     

Toehold‐Mediated Displacement of an Adenosine‐Binding Aptamer from a DNA Duplex by its Ligand

DNA is increasingly used to engineer dynamic nanoscale circuits, structures, and motors, many of which rely on DNA strand‐displacement reactions. The use of functional DNA sequences (e.g., aptamers, which bind to a wide range of ligands) in these reactions would potentially confer responsiveness on such devices, and integrate DNA computation with highly varied molecular stimuli. By using high‐throughput single‐molecule FRET methods, we compared the kinetics of a putative aptamer–ligand and aptamer–complement strand‐displacement reaction. We found that the ligands actively disrupted the DNA duplex in the presence of a DNA toehold in a similar manner to complementary DNA, with kinetic details specific to the aptamer structure, thus suggesting that the DNA strand‐displacement concept can be extended to functional DNA–ligand systems.     

Recent Progress in Aptamer‐Based Functional Probes for Bioanalysis and Biomedicine

Nucleic acid aptamers are short synthetic DNA or RNA sequences that can bind to a wide range of targets with high affinity and specificity. In recent years, aptamers have attracted increasing research interest due to their unique features of high binding affinity and specificity, small size, excellent chemical stability, easy chemical synthesis, facile modification, and minimal immunogenicity. These properties make aptamers ideal recognition ligands for bioanalysis, disease diagnosis, and cancer therapy. This review highlights the recent progress in aptamer selection and the latest applications of aptamer‐based functional probes in the fields of bioanalysis and biomedicine.     

A Multicolor Large Stokes Shift Fluorogen-Activating RNA Aptamer with Cationic Chromophores

Large Stokes shift (LSS) fluorescent proteins (FPs) exploit excited state proton transfer pathways to enable fluorescence emission from the phenolate intermediate of their internal 4-hydroxybenzylidene imidazolone (HBI) chromophore. An RNA aptamer named Chili mimics LSS FPs by inducing highly Stokes-shifted emission from several new green and red HBI analogues that are non-fluorescent when free in solution. The ligands are bound by the RNA in their protonated phenol form and feature a cationic aromatic side chain for increased RNA affinity and reduced magnesium dependence. In combination with oxidative functionalization at the C2 position of the imidazolone, this strategy yielded DMHBO⁺, which binds to the Chili aptamer with a low-nanomolar K_D. Because of its highly red-shifted fluorescence emission at 592 nm, the Chili–DMHBO⁺ complex is an ideal fluorescence donor for Förster resonance energy transfer (FRET) to the rhodamine dye Atto 590 and will therefore find applications in FRET-based analytical RNA systems.     

Optimization of Experimental Parameters to Explore Small‐Ligand/Aptamer Interactions through Use of 1H NMR Spectroscopy and Molecular Modeling

Aptamers constitute an emerging class of molecules designed and selected to recognize any given target that ranges from small compounds to large biomolecules, and even cells. However, the underlying physicochemical principles that govern the ligand‐binding process still have to be clarified. A major issue when dealing with short oligonucleotides is their intrinsic flexibility that renders their active conformation highly sensitive to experimental conditions. To overcome this problem and determine the best experimental parameters, an approach based on the design‐of‐experiments methodology has been developed. Here, the focus is on DNA aptamers that possess high specificity and affinity for small molecules, L ‐tyrosinamide, and adenosine monophosphate. Factors such as buffer, pH value, ionic strength, Mg²⁺‐ion concentration, and ligand/aptamer ratio have been considered to find the optimal experimental conditions. It was then possible to gain new insight into the conformational features of the two ligands by using ligand‐observed NMR spectroscopic techniques and molecular mechanics.     

Novel application of fluorescence coupled capillary electrophoresis to resolve the interaction between the G‐quadruplex aptamer and thrombin

The dynamic binding status between the thrombin and its G‐quadruplex aptamers and the stability of its interaction partners were probed using our previously established fluorescence‐coupled capillary electrophoresis method. A 29‐nucleic acid thrombin binding aptamer was chosen as a model to study its binding affinity with the thrombin ligand. First, the effects of the cations on the formation of G‐quadruplex from unstructured 29‐nucleic acid thrombin binding aptamer were examined. Second, the rapid binding kinetics between the thrombin and 6‐carboxyfluorescein labeled G‐quadruplex aptamer was measured. Third, the stability of G‐quadruplex aptamer–thrombin complex was also examined in the presence of the interfering species. Remarkably, it was found that the complementary strand of 29‐nucleic acid thrombin binding aptamer could compete with G‐quadruplex aptamer and thus disassociated the G‐quadruplex structure into an unstructured aptamer. These data suggest that our in‐house established fluorescence‐coupled capillary electrophoresis assay could be applied to binding studies of the G‐quadruplex aptamers, thrombin, and their ligands, while overcoming the complicated and costly approaches currently available.     

Interaction study of a lysozyme‐binding aptamer with mono‐ and divalent cations by ACE

Binding between an aptamer and its target is highly dependent on the conformation of the aptamer molecule, this latter seeming to be affected by a variety of cations. As only a few studies have reported on the interactions of monovalent or divalent cations with aptamers, we describe herein the use of ACE in its mobility shift format for investigating interactions between various monovalent (Na⁺, K⁺, Cs⁺) or divalent (Mg²⁺, Ca²⁺, Ba²⁺) cations and a 30‐mer lysozyme‐binding aptamer. This study was performed in BGEs of different natures (phosphate and MOPS buffers) and ionic strengths. First, the effective charges of the aptamer in 30 mM ionic strength phosphate and MOPS (pH 7.0) were estimated to be 7.4 and 3.6, respectively. Then, corrections for ionic strength and counterion condensation effects were performed for all studies. The effective mobility shift was attributed not only to these effects, but also to a possible interaction with the buffer components (binary or ternary complexes) as well as possible conformational changes of the aptamer. Finally, apparent binding constants were calculated for divalent cations with mathematical linearization methods, and the influence of the nature of the BGE was evidenced.     

Structural basis of DNA folding and recognition in an AMP-DNA aptamer complex: distinct architectures but common recognition motifs for DNA and RNA aptamers complexed to AMP

Background: Structural studies by nuclear magnetic resonance (NMR) of RNA and DNA aptamer complexes identified through in vitro selection and amplification have provided a wealth of information on RNA and DNA tertiary structure and molecular recognition in solution. The RNA and DNA aptamers that target ATP (and AMP)' with micromolar affinity exhibit distinct binding site sequences and secondary structures. We report below on the tertiary structure of the AMP-DNA aptamer complex in solution and compare it with the previously reported tertiary structure of the AMP-RNA aptamer complex in solution.Results: The solution structure of the AMP-DNA aptamer complex shows, surprisingly, that two AMP molecules are intercalated at adjacent sites within a rectangular widened minor groove. Complex formation involves adaptive binding where the asymmetric internal bubble of the free DNA aptamer zippers up through formation of a continuous six-base mismatch segment which includes a pair of adjacent three-base platforms. The AMP molecules pair through their Watson-Crick edges with the minor groove edges of guanine residues. These recognition G·A mismatches are flanked by sheared G·A and reversed Hoogsteen G·G mismatch pairs.Conclusions: The AMP-DNA aptamer and AMP-RNA aptamer complexes have distinct tertiary structures and binding stoichiometries. Nevertheless, both complexes have similar structural features and recognition alignments in their binding pockets. Specifically, AMP targets both DNA and RNA aptamers by intercalating between purine bases and through identical G·A mismatch formation. The recognition G·A mismatch stacks with a reversed Hoogsteen G·G mismatch in one direction and with an adenine base in the other direction in both complexes. It is striking that DNA and RNA aptamers selected independently from libraries of 10¹⁴ molecules in each case utilize identical mismatch alignments for molecular recognition with micromolar affinity within binding-site pockets containing common structural elements.     

Electrospray ionization of nucleic acid aptamer/small molecule complexes for screening aptamer selectivity

Molecular recognition of small molecule ligands by the nucleic acid aptamers for tobramycin, ATP, and FMN has been examined using electrospray ionization mass spectrometry (ESI-MS). Mass spectrometric data for binding stoichiometry and relative binding affinity correlated well with solution data for tobramycin aptamer complexes, in which aptamer/ligand interactions are mediated by hydrogen bonds. For the ATP and FMN aptamers, where ligand interactions involve both hydrogen bonding and significant pi-stacking, the relative binding affinities determined by MS did not fully correlate with results obtained from solution experiments. Some high-affinity aptamer/ligand complexes appeared to be destabilized in the gas phase by internal Coulombic repulsion. In CAD experiments, complexes with a greater number of intermolecular hydrogen bonds exhibited greater gas-phase stability even in cases when solution binding affinities were equivalent. These results indicate that in at least some cases, mass spectrometric data on aptamer/ligand binding affinities should be used in conjunction with complementary techniques to fully assess aptamer molecular recognition properties.     

Ghrelin Detection Using Spiegelmer‐Capture Molecules

Abstract

The aim of this work was to review the development of aptamer‐based assay understanding for possible diagnostic applications. The use of new affinity ligands such as the single strand DNA is particularly suitable for large‐scale synthesis and overcomes the disadvantages of antibodies or enzymes, which are often unstable and expensive. The latest class of potential aptamers is enantiomeric aptamers composed of l‐nucleotides, the so‐called spiegelmers. Attributing to the unnatural sugars used, spiegelmers are resistant to host nucleases, exploring the possibility to work in a complex matrix‐like blood.

After analyzing the strategies reported in the literature for the detection of the aptamer‐target complex formation, we reported our experience in the realization of two bioassays, based on electrochemical or colorimetric detection, using the unusual aptamer for the detection of ghrelin.

This work can open interesting applications in biosensing technology. There are few analytical reports on bioassay using spiegelmers. The new field is extremely interesting, considering that these new analytical tools hold an enormous promise for a fast and simple diagnosis of genetic problems in real matrices.     

Aptamers selected for higher-affinity binding are not more specific for the target ligand

Previous study of eleven different in vitro-selected RNA aptamers that bind guanosine triphosphate (GTP) with K(d)s ranging from 8 microM to 9 nM showed that more information is required to specify the structures of the higher-affinity aptamers. We are interested in understanding how the more complex aptamers achieve higher affinities for the ligand. In vitro selection produces structural solutions to a functional problem that are are as simple as possible in terms of the information content needed to define them. It has long been assumed that the simplest way to improve the affinity of an aptamer is to increase the shape and functional group complementarity of the RNA binding pocket for the ligand. This argument underlies the hypothesis that selection for higher-affinity aptamers automatically leads to structures that bind more specifically to the target molecule. Here, we examined the binding specificities of the eleven GTP aptamers by carrying out competition binding studies with sixteen different chemical analogues of GTP. The aptamers have distinct patterns of specificity, implying that each RNA is a structurally unique solution to the problem of GTP binding. However, these experiments failed to provide evidence that higher-affinity aptamers bind more specifically to GTP. We suggest that the simplest way to improve aptamer K(d)s may be to increase the stability of the RNA tertiary structure with additional intramolecular RNA-RNA interactions; increasingly specific ligand binding may emerge only in response to direct selection for specificity.     

Two Distinct Thermal Stabilities of DNA and Enzymatic Activities of DNase I in a Multistep Assembly with Carbazole Ligands: Different Binding Characteristics for Duplex and Quadruplex DNA

A partially hydrophobic carbazole ligand ((Im⁺)₂Cz: 2,2′‐(9‐ethyl‐9 H‐carbazole‐3,6‐diyl)bis(ethyne‐2,1‐diyl)bis(1,3‐dimethyl‐1 H‐imidazol‐3‐ium)) adopts two different binding states (binding states I and II) in its interactions with calf‐thymus (ct‐) DNA. Two distinct binding states were identified by biphasic UV/Vis and circular dichroism (CD) spectral changes during the titration of DNA into the carbazole ligand. At low concentrations of ct‐DNA, (Im⁺)₂Cz binds to nearly every part of ct‐DNA (binding state I). By contrast, an increased concentration of ct‐DNA results in a switch in the DNA‐binding state, so that the ligands are bound per five DNA base pairs. Similarly, a monocationic carbazole ligand (Im⁺Cz: 2‐((6‐bromo‐9‐ethyl‐9 H‐carbazol‐3‐yl)ethynyl)‐1,3‐dimethyl‐1 H‐imidazol‐3‐ium) also shows biphasic UV/Vis spectral changes during the titration of ct‐DNA into Im⁺Cz, which suggests two different binding states of the Im⁺Cz ligand with ct‐DNA. The stepwise equilibrium of the ligand–DNA‐complex formation is capable of switching the thermal stability of ct‐DNA, as well as the enzymatic activity of deoxyribonuclease (DNase I). In binding state I, the (Im⁺)₂Cz ligands interact with nearly every base pair in ct‐DNA and stabilize the double‐helix structure, which results in a larger increase in the melting temperature of the ct‐DNA than that observed with binding state II. On the other hand, the (Im⁺)₂Cz ligand significantly reduces the enzymatic activity of DNase I in binding state I, although the enzymatic activity is recovered once the binding state of the ligand–DNA complex is changed to binding state II. The (Im⁺)₂Cz ligand was also employed as a binder for G‐quadruplex DNA. In contrast to the stepwise complex formation between (Im⁺)₂Cz and ct‐DNA, (Im⁺)₂Cz shows a monotonous UV/Vis spectral response during the titration of G‐quadruplex DNA into (Im⁺)₂Cz, which suggests a single binding state for (Im⁺)₂Cz with G‐quadruplex DNA.     

Competitive Assay for Theophylline Based on an Abasic Site‐Containing DNA Duplex Aptamer and a Fluorescent Ligand

A fluorescence assay for theophylline, one of the common drugs for acute and chronic asthmatic conditions, has been developed based on an abasic site‐containing DNA duplex aptamer (AP aptamer) in combination with an abasic site‐binding fluorescent ligand, riboflavin. The assay is based on the competitive binding of theophylline and riboflavin at the abasic (AP) site of the AP aptamer. In the absence of theophylline, riboflavin binds to the receptor nucleotide opposite the AP site, which leads to fluorescence quenching of the riboflavin. Upon addition of theophylline, competitive binding occurs between theophylline and riboflavin, which results in an effective fluorescence restoration due to release of riboflavin from the AP site. From an examination of the optimization of the AP aptamers, the complex of riboflavin with a 23‐mer AP aptamer (5′‐TCT GCG TCC AGX GCA ACG CAC AC‐3′/5′‐GTG TGC GTT GCC CTG GAC GCA GA‐3′; X : the AP site (Spacer C3, a propylene residue)) possessing cytosine as a receptor nucleotide was found to show a selective and effective fluorescence response to theophylline; the limit of detection for theophylline was 1.1 μM . Furthermore, fluorescence detection of theophylline was successfully demonstrated with high selectivity in serum samples by using the optimized AP aptamer and riboflavin.     

Screening interaction between ochratoxin A and aptamers by fluorescence anisotropy approach

By taking advantage of the intrinsic fluorescence of ochratoxin A (OTA), we present a fluorescence anisotropy approach for rapid analysis of the interactions between OTA and aptamers. The specific binding of OTA with a 36-mer aptamer can induce increased fluorescence anisotropy (FA) of OTA as the result of the freedom restriction of OTA and the increase of molecular volume, and the maximum FA change is about 0.160. This FA approach enables an easy way to investigate the effects of buffer compositions like metal ions on the affinity binding. FA analysis shows the interaction between OTA and aptamer is greatly enhanced by the simultaneous presence of Ca²⁺ and Na⁺, while the binding affinity of aptamer decreases more than 18-fold when only Ca²⁺ exists, and the binding is completely lost when Ca²⁺ is absent. Crucial region of the aptamer for binding can be mapped through FA analysis and aptamer mutation. The demonstrated FA approach maintains the advantages of FA in simplicity, rapidity, and robustness. This investigation will help the development of aptamer-based assays for OTA detection in optimizing the binding conditions, modification of aptamers, and rational design.

Label‐free aptamer‐based partial filling technique for enantioseparation and determination of dl‐tryptophan with micellar electrokinetic chromatography

In this study, a simple and reproducible method for enantioseparation and determination of dl ‐tryptophan (dl ‐T rp) was developed by using a partial filling technique in combination with MEKC . The corresponding l ‐T rp specific DNA aptamer was used as a chiral selector. Sodium cholate was used to form the chiral micelles and to enhance the enantioseparation of the enantiomers. Effects of aptamer concentration, filling time, buffer composition, and separation voltage on the enantioseparation were evaluated. The M g²⁺ and Na⁺ concentration in separation buffer was found to effectively affect the separation efficiency and reproducibility. Under the optimal conditions, d ‐ and l ‐T rp were completely enantioseparated in less than 9 min. This aptamer‐based partial‐filling approach has the potential to be extended to the separation of other enantiomers after the replacement of corresponding specific aptamers.     

Probing the structure of DNA aptamers with a classic heterocycle

DNA aptamers are synthetic, single-stranded DNA oligonucleotides selected by SELEX methods for their binding with specific ligands. Here we present ethidium binding results for three related DNA aptamers (PDB code: 1OLD, 1DB6, and 2ARG)that bind L-argininamide (L-Arm). The ligand bound form of each aptamer's structure has been reported and each are found to be composed primarily of two domains consisting of a stem helical region and a loop domain that forms a binding pocket for the cognate ligand. Previous thermodynamic experiments demonstrated that the DNA aptamer 1OLD undergoes a large conformational ordering upon binding to L-Arm. Here we extend those linkage binding studies by examining the binding of the heterocyclic intercalator ethidium to each of the three aptamers by fluorescence and absorption spectrophotometric titrations. Our results reveal that ethidium binds to each aptamer with DeltaG degree's in the range of -8.7 to -9.4 kcal/mol. The stoichiometry of binding is 2:1 for each aptamer and is quantitatively diminished in the presence of L-Arm as is the overall fluorescence intensity of ethidium. Together, these results demonstrate that a portion of the bound ethidium is excluded from the aptamer in the presence of a saturating amount of L-Arm. These results demonstrate the utility of ethidium and related compounds for the probing of non-conventional DNA structures and reveal an interesting fundamental thermodynamic linkage in DNA aptamers. Results are discussed in the context of the thermodynamic stability and structure of each of the aptamers examined.