A Bio-inspired Nano-pocket Spatial Structure for Targeting Uranyl Capture

Biology has evolved excellent spatial structures for high-selectivity and high-affinity capture of heavy metals. Inspired by the spatial structure of the superb-uranyl binding protein SUP, we mimic the spatial structure of SUP in metal–organic frameworks (MOFs). The MOF UiO-66-3C4N fabricated by introducing 4-aminoisophthalic acid into UiO-66 shows high uranyl adsorption capacity both in simulated seawater and in natural seawater. In natural seawater, UiO-66-3C4N exhibits 17.03 times higher uranium extraction capacity than that of vanadium, indicating the high selectivity of the adsorbent. The EXAFS analysis and DFT calculation reveal that UiO-66-3C4N forms smaller nano-pocket for uranyl capture than that of SUP protein, which can both restrict the entrance of the other interfering ions with larger size and reinforce the binding by increasing the coordination interaction, and therefore qualify the nano-pocket with high affinity and high selectivity to uranyl.     

Ultrafast and Highly Selective Uranium Extraction from Seawater by Hydrogel‐like Spidroin‐based Protein Fiber

For the practical extraction of uranium from seawater, adsorbents with high adsorption capacity, fast equilibrium rate, high selectivity, and long service life are needed. Herein, a chimeric spidroin‐based super uranyl‐binding protein (SSUP) fiber was designed by fusing the gene of super uranyl‐binding protein (SUP) with the gene of spidroin. SUP endowed the SSUP fiber with high affinity and selectivity to uranium, and spidroin gave the SSUP fiber with high mechanical strength and high reusability. The wet SSUP fiber is a water‐rich hydrogel‐like structure, which provided abundant hydrophilic intermolecular space for the entrance of uranyl ions, and could accelerate the rate for uranium adsorption. In seawater, the SSUP fiber achieved a breakthrough uranium extraction capacity of 12.33 mg g^?1 with an ultrashort equilibration time of 3.5 days, suggesting that SSUP fiber might be a promising adsorbent for uranium extraction from the natural seawater.     

Spidroin‐Inspired,High‐Strength,Loofah‐Shaped Protein Fiber for Capturing Uranium from Seawater

The unique three‐dimensional structure of spidrion determines the outstanding mechanical properties of the spider silk fiber. Inspired by the similarity of the three‐dimensional structure of superb‐uranyl binding protein (SUP) to that of spidroin, a dual‐SUP (DSUP) chimeric protein fiber with high tensile strength is designed. The DSUP hydrogel fiber exhibits a loofah‐shape structure by the cross‐interaction of the protein nanofiber. Full exposure of abundant functional uranyl‐binding sites in the stretchable loofah‐shape hydrogel protein fiber give the DSUP fiber a groundbreaking uranium extraction capacity of 17.45 mg g^?1 with an ultrashort saturation time of 3 days in natural seawater. This work reports the design of an adsorbent with ultrahigh uranium extraction capacity and explores a strategy for fabricating artificial high‐strength functional non‐spidroin protein fiber.     

Enhancing CO2 Separation Ability of a Metal–Organic Framework by Post‐Synthetic Ligand Exchange with Flexible Aliphatic Carboxylates

A series of porous metal–organic frameworks having flexible carboxylic acid pendants in their pores (UiO‐66‐ADn: n=4, 6, 8, and 10, where n denotes the number of carbons in a pendant) has been synthesized by post‐synthetic ligand exchange of terephthalate in UiO‐66 with a series of alkanedioic acids (HO₂C(CH₂)_n?2CO₂H). NMR, IR, PXRD, TEM, and mass spectral data have suggested that a terephthalate linker in UiO‐66 was substituted by two alkanedioate moieties, resulting in free carboxyl pendants in the pores. When post‐synthetically modified UiO‐66 was partially digested by adjusting the amount of added HF/sample, NMR spectra indicated that the ratio of alkanedioic acid/terephthalic acid was increased with smaller amounts of acid, implying that the ligand substitution proceeded from the outer layer of the particles. Gas sorption studies indicated that the surface areas and the pore volumes of all UiO‐66‐ADns were decreased compared to those of UiO‐66, and that the CO₂ adsorption capacities of UiO‐66‐ADn (n=4, 8) were similar to that of UiO‐66. In the case of UiO‐66‐AD6, the CO₂ uptake capacity was 34 % higher at 298 K and 58 % higher at 323 K compared to those of UiO‐66. It was elucidated by thermodynamic calculations that the introduction of flexible carboxyl pendants of appropriate length has two effects: 1) it increases the interaction enthalpy between the host framework and CO₂ molecules, and 2) it mitigates the entropy loss upon CO₂ adsorption due to the formation of multiple configurations for the interactions between carboxyl groups and CO₂ molecules. The ideal adsorption solution theory (IAST) selectivity for CO₂ adsorption over that of CH₄ was enhanced for all of the UiO‐66‐ADns compared to that of UiO‐66 at 298 K. In particular, UiO‐66‐AD6 showed the most strongly enhanced CO₂ uptake capacity and significantly increased selectivity for CO₂ adsorption over that of CH₄ at ambient temperature, suggesting that it is a promising material for sequestering CO₂ from landfill gas.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Metal–Organic Gel Material Based on UiO‐66‐NH2 Nanoparticles for Improved Adsorption and Conversion of Carbon Dioxide

Metal–organic frameworks (MOFs) including the UiO‐66 series show potential application in the adsorption and conversion of CO₂. Herein, we report the first tetravalent metal‐based metal–organic gels constructed from Zr^IV and 2‐aminoterephthalic acid (H₂BDC‐NH₂). The ZrBDC‐NH₂ gel materials are based on UiO‐66‐NH₂ nanoparticles and were easily prepared under mild conditions (80 °C for 4.5 h). The ZrBDC‐NH₂‐1:1‐0.2 gel material has a high surface area (up to 1040 m² g^?1) and showed outstanding performance in CO₂ adsorption (by using the dried material) and conversion (by using the wet gel) arising from the combined advantages of the gel and the UiO‐66‐NH₂ MOF. The ZrBDC‐NH₂‐1:1‐0.2 dried material showed 38 % higher capture capacity for CO₂ at 298 K than microcrystalline UiO‐66‐NH₂. It showed high ideal adsorbed solution theory selectivity (71.6 at 298 K) for a CO₂/N₂ gas mixture (molar ratio 15:85). Furthermore, the ZrBDC‐NH₂‐1:1‐0.2 gel showed activity as a heterogeneous catalyst in the chemical fixation of CO₂ and an excellent catalytic performance was achieved for the cycloaddition of atmospheric pressure of CO₂ to epoxides at 373 K. In addition, the gel catalyst could be reused over multiple cycles with no considerable loss of catalytic activity.     

Monodentate AIEgen Anchored on Metal‐Organic Framework for Fast Fluorescence Sensing of Phosphate

Herein, a novel sensor (TPE‐UiO‐66) was designed via anchoring monodentate tetraphenylethylene (TPE) onto UiO‐66 framework. The combination of the distinct aggregation‐induced emission (AIE) of TPE and the easy replacement of monodentate linker by guest phosphate, makes TPE‐UiO‐66 an ideal platform for sensing HPO₄^2–. Experimental results indicate that TPE‐UiO‐66 can selectively sense HPO₄^2– from other common anions. The limit of detection (LOD) can reach to 5.56 μmol·L^–1 and more importantly, TPE‐UiO‐66 also exhibits an ultra‐fast equilibrium response of 2 min, far faster than those of other sensors especially for UiO‐66‐NH₂. The combination of experimental analysis and density functional theory (DFT) calculations demonstrates that the high selectivity, high sensitivity and fast response of HPO₄^2– detection by TPE‐UiO‐66 can be attributed to the stronger coordination interactions of HPO₄^2– with Zr‐O cluster of UiO‐66 than that of TPE molecule. This study not only provides a potential probe for phosphate, but also represents a novel strategy to design stimuli‐responsive fluorescent MOF‐based sensors via using monodentate AIEgens.     

An Evaluation of UiO‐66 for Gas‐Based Applications

In addition to its high thermal stability, repetitive hydration/dehydration tests have revealed that the porous zirconium terephthalate UiO‐66 switches reversibly between its dehydroxylated and hydroxylated versions. The structure of its dehydroxylated form has thus been elucidated by coupling molecular simulations and X‐ray powder diffraction data. Infrared measurements have shown that relatively weak acid sites are available while microcalorimetry combined with Monte Carlo simulations emphasize moderate interactions between the UiO‐66 surface and a wide range of guest molecules including CH₄, CO, and CO₂. These properties, in conjunction with its significant adsorption capacity, make UiO‐66 of interest for its further evaluation for CO₂ recovery in industrial applications. This global approach suggests a strategy for the evaluation of metal–organic frameworks for gas‐based applications.     

Molecularly imprinted polymer coating on metal‐organic frameworks for solid‐phase extraction of fluoroquinolones from water

In this work, a novel surface molecularly imprinted polymer with high adsorption capacity, high adsorption rate, and high selectivity for fluoroquinolones was prepared on the surface of UiO‐66‐NH₂, which is a kind of metal‐organic framework. The surface morphology and adsorption properties of this molecularly imprinted polymer were investigated. The maximum adsorption capacity was 99.19 mg/g, and adsorption equilibrium was achieved within 65 s. Combined with reversed‐phase high‐performance liquid chromatography, the molecularly imprinted polymer was used to selectively enrich, separate and analyze fluoroquinolones present in lake water. The results showed that the recoveries of the four fluoroquinolones were 92.6–100.5%, and the relative standard deviations were 2.9–6.4% (n = 3). The novel molecularly imprinted polymer is an excellent adsorbent and has broad application prospects in the enrichment and separation of trace analytes in complex samples.     

Evaluation of UiO‐66 metal organic framework as an effective sorbent for Curcumin's overdose

Metal organic frameworks (MOFs) UiO‐66 (UiO stands for University of Oslo) and NH₂‐UiO‐66 were prepared and characterized as sorbent (antidotal agents) for curcumin (CUR) adsorption. The structure of products were characterized by X‐ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Attenuated Total Reflectance‐Fourier transform infrared spectroscopy (ATR‐FTIR), and N₂ adsorption–desorption measurements. FESEM showed NH₂‐UiO‐66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size distribution. Adsorption capacities of CUR/MOFs with different mass ratios in the feed were investigated in the present study, and this investigation revealed that when the CUR/MOFs with mass ratio was around 0.4, the absorption capacity of NH₂‐UiO‐66 had tended to maximum. Although, functionalization reduced the specific surface area and free volume, introducing polar amine groups could improve the affinity of NH₂‐UiO‐66 respect to CUR. Kinetic studies showed that the kinetic data are well fitted with the pseudo‐ second‐order model. MTT assay revealed that MOFs at the concentration range of 0–560 μg/ml had no cytotoxic effect on the Human Foreskin Fibroblast normal cell line (HFF‐2). These results suggest that these MOFs could be safe as sorbent for adsorb CUR from the body.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

Copper(II) Oxide Nanoparticles Impregnated on Melamine‐Modified UiO‐66‐NH2 Metal–Organic Framework for C–N Cross‐Coupling Reaction and Synthesis of 2‐Substituted Benzimidazoles

A zirconium‐based metal–organic framework, UiO‐66‐NH₂, modified by melamine (Mlm) was used as a support for CuO nanoparticles (NPs). Melamine offered a platform for uniform and homogeneous distribution of NPs on the surface of the frameworks and made a strong bonding to the NPs to avoid undesirable leaching. UiO‐66‐NH₂‐Mlm/CuO NPs were used for the Buchwald–Hartwig C–N cross‐coupling reaction to synthesize arylated anilines from phenyl iodide, bromide, and chloride and primary and secondary amines in DMF at 110°C. The catalyst was also employed for the synthesis of 2‐substituted benzimidazole derivatives from various aromatic aldehydes and o‐phenylenediamine in the absence of an oxidant in EtOH at room temperature. The catalyst was recyclable and reusable for several times and exhibited good stability (examined by BET, XRD, and SEM–EDX) in reaction conditions.     

Spray‐Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO‐66‐NCS MOF was formed by postsynthetic modification of UiO‐66‐NH₂. The UiO‐66‐NCS MOFs displays a circa 20‐fold increase in activity against the chemical warfare agent simulant dimethyl‐4‐nitrophenyl phosphate (DMNP) compared to UiO‐66‐NH₂, making it the most active MOF materials using a validated high‐throughput screening. The ?NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine‐terminated polypropylene polymers (Jeffamines) through a facile room‐temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray‐coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray‐coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

Cooperative Multifunctional Catalysts for Nitrone Synthesis: Platinum Nanoclusters in Amine‐Functionalized Metal–Organic Frameworks

Nitrones are key intermediates in organic synthesis and the pharmaceutical industry. The heterogeneous synthesis of nitrones with multifunctional catalysts is extremely attractive but rarely explored. Herein, we report ultrasmall platinum nanoclusters (PtNCs) encapsulated in amine‐functionalized Zr metal–organic framework (MOF), UiO‐66‐NH₂ (Pt@UiO‐66‐NH₂) as a multifunctional catalyst in the one‐pot tandem synthesis of nitrones. By virtue of the cooperative interplay among the selective hydrogenation activity provided by the ultrasmall PtNCs and Lewis acidity/basicity/nanoconfinement endowed by UiO‐66‐NH₂, Pt@UiO‐66‐NH₂ exhibits remarkable activity and selectivity, in comparison to Pt/carbon, Pt@UiO‐66, and Pd@UiO‐66‐NH₂. Pt@UiO‐66‐NH₂ also outperforms Pt nanoparticles supported on the external surface of the same MOF (Pt/UiO‐66‐NH₂). To our knowledge, this work demonstrates the first examples of one‐pot synthesis of nitrones using recyclable multifunctional heterogeneous catalysts.     

Synthesis of thermo‐responsive bovine hemoglobin imprinted nanoparticles by combining ionic liquid immobilization with aqueous precipitation polymerization

Surface molecular imprinting over functionalized nanoparticles has proved to be an effective approach for construction of artificial nanomaterials for protein recognition. Herein, we report a strategy for synthesis of core–shell protein‐imprinted nanoparticles by the functionalization of nano‐cores with ionic liquids followed by aqueous precipitation polymerization to build thermo‐responsive imprinted polymer nano‐shells. The immobilized ionic liquids can form multiple interactions with the protein template. The polymerization process can produce thermo‐reversible physical crosslinks, which are advantageous to enhancing imprinting and facilitating template removal. With bovine hemoglobin as a model template, the imprinted nanoparticles showed temperature‐sensitivity in both dispersion behaviors and rebinding capacities. Compared with the ionic‐liquid‐modified core nanoparticles, the imprinted particles exhibited greatly increased selectivity and two orders of magnitude higher binding affinity for the template protein. The imprinted nanoparticles achieved relatively high imprinting factor up to 5.0 and specific rebinding capacity of 67.7 mg/g, respectively. These nanoparticles also demonstrated rapid rebinding kinetics and good reproducibility after five cycles of adsorption–regeneration. Therefore, the presented approach may be viable for the fabrication of high‐performance protein‐imprinted nanoparticles with temperature sensitivity.     

Preparation and evaluation of open‐tubular capillary column combining a metal–organic framework and a brush‐shaped polymer for liquid chromatography

In this work, an open‐tubular capillary liquid‐phase column was prepared by modifying chain polymer on the inner surface of capillary and chemical bonding of metal organic frameworks, NH₂‐UiO‐66, to the brushes of chain polymer (poly(glycidyl methacrylate)). Besides advantages of facial preparation and good permeability, the chain polymer effectively increases the modification amount of NH₂‐UiO‐66 nanoparticles to increase the phase ratio of open‐tubular capillary column and enhance the interactions with analytes. The results of scanning electron microscope energy‐dispersive X‐ray spectra indicated that NH₂‐UiO‐66 nanoparticles were successfully bonded to the chain polymer. Because of the hydrophobic interaction and hydrogen bonding interaction between the analytes and the ligand of NH₂‐UiO‐66, different analytes were well separated on the NH₂‐UiO‐66‐modified poly(glycidyl methacrylate) capillary (1.12 m × 25 μm id × 365 μm od) with the high absolute column efficiency reaching 121 477 plates, benefiting from an open‐tubular column and low mass transfer resistance provided by polymer brush and metal–organic framework crystal. The relative standard deviations of the retention time for run‐to‐run, day‐to‐day, and column‐to‐column (n = 3) runs are below 4.28%, exhibiting good repeatability. Finally, the column was successfully applied to separation of flavonoids in licorice.     

Superprotonic Conductivity of a UiO‐66 Framework Functionalized with Sulfonic Acid Groups by Facile Postsynthetic Oxidation

Facile postsynthetic oxidation of the thiol‐laced UiO‐66‐type framework UiO‐66(SH)₂ enabled the generation of UiO‐66(SO₃H)₂ with sulfonic acid groups covalently linked to the backbone of the system. The oxidized material exhibited a superprotonic conductivity of 8.4×10^?2 S cm^?1 at 80 °C and 90 % relative humidity, and long‐term stability of the conductivity was observed. This level of conductivity exceeds that of any proton‐conducting MOF reported to date and is equivalent to the conductivity of the most effective known electrolyte, Nafion.     

Boronate Affinity Monolith with a Gold Nanoparticle‐Modified Hydrophilic Polymer as a Matrix for the Highly Specific Capture of Glycoproteins

As low abundance is the great obstacle for glycoprotein analysis, the development of materials with high efficiency and selectivity for glycoprotein enrichment is a prerequisite in glycoproteome research. Herein, we report a new kind of hydrophilic boronate affinity monolith by attaching 4‐mercaptophenylboronic acid (MPBA) with 2‐mercaptoethylamine (MPA) on the gold nanoparticle‐modified poly(glycidyl methacrylate‐co‐poly(ethylene glycol) diacrylate)) monolith for glycoprotein enrichment. With poly(ethylene glycol) diacrylate as the cross‐linker and the further modification of gold nanoparticles, the matrix has advantages of good hydrophilicity and enhanced surface area, which are beneficial to improve the enrichment selectivity and efficiency for glycoproteins. The attachment of MPBA and MPA provide intramolecular B?N coordination, which could further enhance the specificity of glycoprotein capture. Such a boronate affinity monolith was applied to enrich horseradish peroxidase (HRP) from the mixture of HRP and bovine serum albumin (BSA), and high selectivity was obtained even at a mass ratio of 1:1000. In addition, the binding capacity of ovalbumin on such monolith reached 390 μg g^?1. Furthermore, the average recovery of HRP on the prepared affinity monoliths was (84.8±1.9) %, obtained in three times enrichment with the same column. Finally, the boronate affinity monolith was successfully applied for the human‐plasma glycoproteome analysis. As a result, 160 glycoproteins were credibly identified from 9 μg of human plasma, demonstrating the great potential of such a monolith for large‐scale glycoproteome research.     

Direct synthesis of Fe(III) immobilized Zr‐based metal–organic framework for aerobic oxidation reaction

A Zr‐based metal–organic framework with bipyridine units (UiO‐67) has been utilized for the immobilization of catalytically active iron species via a post‐synthetic metalation method. UiO‐67 bipyridine MOF was synthesized through a simple solvothermal method and was shown to have a UiO‐type structure. Post‐synthetic metalation of UiO‐67 MOF was performed for the immobilization of the catalytically active FeCl₃. FT‐IR and EDX element map suggested that FeCl₃ is coordinately bonded to the UiO‐67 bipyridine framework. The synthesized UiO‐67‐FeCl₃ catalyst was used for the aerobic oxidation of alcohols and benzylic compounds in the presence of molecular oxygen. In addition, the UiO‐67‐FeCl₃ catalyst can be reused as a solid heterogeneous catalyst without compromising its activity and selectivity.