Synthesis,Crystal Structures,and Fungicidal Activity of Novel 1,5‐Diaryl‐3‐(glucopyranosyloxy)‐1H‐pyrazoles

Five novel pyrazole‐coupled glucosides, 1,5‐diaryl‐1H‐pyrazol‐3‐yl 2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranosides 5a – 5e , were synthesized by the phase‐transfer catalytic reaction of 1,5‐diaryl‐1H‐pyrazol‐3‐ols 4a – 4e with acetobromo‐α‐D ‐glucose in H₂O/CHCl₃ under alkaline conditions, using Bu₄N⁺Br^? as catalyst. Then, glucosides 5a – 5c were deacetylated in a solution of Na₂CO₃/MeOH to yield the 1,5‐diaryl‐3‐(β‐D ‐glucopyranosyloxy)‐1H‐pyrazoles 6a – 6c . Their structures were characterized by ¹H,¹H‐COSY, ¹H‐, ¹³C‐, and ¹⁹F‐NMR spectroscopy, as well as elemental analysis. The structures of 5d and 6c were also determined by single‐crystal X‐ray diffraction analysis. A preliminary in vitro bioassay indicated that compounds 4e and 5d exhibited excellent‐to‐medium fungicidal activity against Sclerotinia sclerotiorum at the dosage of 10 μg/ml.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Enantioselective Synthesis of α‐Hydroxy Amides and β‐Amino Alcohols from α‐Keto Amides

Synthesis of enantiomerically enriched α‐hydroxy amides and β‐amino alcohols has been accomplished by enantioselective reduction of α‐keto amides with hydrosilanes. A series of α‐keto amides were reduced in the presence of chiral Cu^II/(S)‐DTBM‐SEGPHOS catalyst to give the corresponding optically active α‐hydroxy amides with excellent enantioselectivities by using (EtO)₃SiH as a reducing agent. Furthermore, a one‐pot complete reduction of both ketone and amide groups of α‐keto amides has been achieved using the same chiral copper catalyst followed by tetra‐n‐butylammonium fluoride (TBAF) catalyst in presence of (EtO)₃SiH to afford the corresponding chiral β‐amino alcohol derivatives.     

Bis(4‐nitraminofurazanyl‐3‐azoxy)azofurazan and Derivatives: 1,2,5‐Oxadiazole Structures and High‐Performance Energetic Materials

Bis(4‐nitraminofurazanyl‐3‐azoxy)azofurazan ( 1 ) and ten of its energetic salts were prepared and fully characterized. Computational analysis based on isochemical shielding surface and trigger bond dissociation enthalpy provide a better understanding of the thermal stabilities for nitramine‐furazans. These energetic compounds exhibit good densities, high heats of formation, and excellent detonation velocity and pressure. Some representative compounds, for example, 1 (v_D: 9541 m s^?1; P: 40.5 GPa), and 4 (v_D: 9256 m s^?1; P: 38.0 GPa) exhibit excellent detonation performances, which are comparable with current high explosives such as RDX (v_D: 8724 m s^?1; P: 35.2 GPa) and HMX (v_D: 9059 m s^?1; P: 39.2 GPa).     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Synthesis of 5‐Aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles via Three‐Component Reaction of 1,1‐Bis(methylsulfanyl)‐2‐nitroethene,Aromatic Aldehydes,and Hydrazine

An efficient approach for the preparation of functionalized 5‐aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles 2 is described. This three‐component reaction between benzaldehydes 1 , NH₂NH₂?H₂O, and 1,1‐bis(methylsulfanyl)‐2‐nitroethene proceeds in EtOH under reflux conditions in good‐to‐excellent yields. The structures of 2 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

A fourfold interpenetrating cadmium(II) metal–organic framework based on 2,4,6‐tris(pyridin‐4‐yl)‐1,3,5‐triazine with reversible photochromic properties

2,4,6‐Tris(pyridin‐4‐yl)‐1,3,5‐triazine (tpt), as an organic molecule with an electron‐deficient nature, has attracted considerable interest because of its photoinduced electron transfer from neutral organic molecules to form stable anionic radicals. This makes it an excellent candidate as an organic linker in the construction of photochromic complexes. Such a photochromic three‐dimensional (3D) metal–organic framework (MOF) has been prepared using this ligand. Crystallization of tpt with Cd(NO₃)₂·4H₂O in an N,N‐dimethylacetamide–methanol mixed‐solvent system under solvothermal conditions afforded the 3D MOF poly[[bis(nitrato‐κ²O,O′)cadmium(II)]‐μ₃‐2,4,6‐tris(pyridin‐4‐yl)‐1,3,5‐triazine‐κ³N²:N⁴:N⁶], [Cd(NO₃)₂(C₁₈H₁₂N₆)]_n, which was characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis and single‐crystal X‐ray diffraction. The X‐ray diffraction crystal structure analysis reveals that the asymmetric unit contains one independent Cd^II cation, one tpt ligand and two coordinated NO₃^? anions. The Cd^II cations are connected by tpt ligands to generate a 3D framework. The single framework leaves voids that are filled by mutual interpenetration of three independent equivalent frameworks in a fourfold interpenetrating architecture. The compound shows a good thermal stability and exhibits a reversible photochromic behaviour, which may originate from the photoinduced electron‐transfer generation of radicals in the tpt ligand.     

Design,Synthesis and Biological Evaluation of Novel N‐(4‐([2,2′:5′,2′′‐Terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) Benzamide Derivatives

On the basis of the principle of combination of active groups, a series of novel N‐(4‐([2,2′:5′,2′′‐terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) benzamide derivatives were designed, synthesized and systematically evaluated for their antiviral activity against tobacco mosaic virus (TMV). The bioassay results showed that most of these compounds displayed good anti‐TMV activity, and some of them exhibited higher antiviral activity than commercial Ningnanmycin. Especially, compound 8e with excellent anti‐TMV activity (inactivation activity, 92.3%/500 µg·mL^?1; curative activity, 85.7%/500 µg·mL^?1 and protection activity, 64.7%/500 µg·mL^?1) emerged as a potential inhibitor of plant virus TMV. Quantitative structure‐activity relationship studies proved that the van der Waals volume (V) and electronic parameter (∑(∑σ_o+σ_p) and ∑σ_m) for the substituent R¹ were very important for antiviral activities in this class of compounds.     

A two‐dimensional mixed‐valence CuII/CuI coordination polymer constructed from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate

Coordination polymers are a thriving class of functional solid‐state materials and there have been noticeable efforts and progress toward designing periodic functional structures with desired geometrical attributes and chemical properties for targeted applications. Self‐assembly of metal ions and organic ligands is one of the most efficient and widely utilized methods for the construction of CPs under hydro(solvo)thermal conditions. 2‐(Pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylate (HPIDC²⁻) has been proven to be an excellent multidentate ligand due to its multiple deprotonation and coordination modes. Crystals of poly[aquabis[μ₃‐5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ⁵N¹,O⁵:N³,O⁴:N²]copper(II)dicopper(I)], [Cu^IICu^I₂(C₁₀H₅N₃O₄)₂(H₂O)]_n, (I), were obtained from 2‐(pyridin‐3‐yl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PIDC) and copper(II) chloride under hydrothermal conditions. The asymmetric unit consists of one independent Cu^II ion, two Cu^I ions, two HPIDC²⁻ ligands and one coordinated water molecule. The Cu^II centre displays a square‐pyramidal geometry (CuN₂O₃), with two N,O‐chelating HPIDC²⁻ ligands occupying the basal plane in a trans geometry and one O atom from a coordinated water molecule in the axial position. The Cu^I atoms adopt three‐coordinated Y‐shaped coordinations. In each [CuN₂O] unit, deprotonated HPIDC²⁻ acts as an N,O‐chelating ligand, and a symmetry‐equivalent HPIDC²⁻ ligand acts as an N‐atom donor via the pyridine group. The HPIDC²⁻ ligands in the polymer serve as T‐shaped 3‐connectors and adopt a μ₃‐κ²N,O:κ²N′,O′:κN′′‐coordination mode, linking one Cu^II and two Cu^I cations. The Cu cations are arranged in one‐dimensional –Cu1–Cu2–Cu3– chains along the [001] direction. Further crosslinking of these chains by HPIDC²⁻ ligands along the b axis in a –Cu2–HPIDC²⁻–Cu3–HPIDC²⁻–Cu1– sequence results in a two‐dimensional polymer in the (100) plane. The resulting (2,3)‐connected net has a (12³)₂(12)₃ topology. Powder X‐ray diffraction confirmed the phase purity for (I), and susceptibilty measurements indicated a very weak ferromagnetic behaviour. A thermogravimetric analysis shows the loss of the apical aqua ligand before decomposition of the title compound.     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

Lanthanoidkomplexe von 1‐(2‐Propenyl)‐ und 1‐(3‐Butenyl)‐1,4,7,10‐tetraazacyclododecan‐4,7,10‐triessigsäure

η³‐1,4,7,10‐tetraazacyclododecane molybdenum tricarbonyl reacts with allyl bromide and 3‐butenyl bromide in dimethylformamide in the presence of K₂CO₃ yielding 1‐(2‐propenyl)‐1,4,7,10‐tetraazacyclododecane ( 1a ) and 1‐(3‐butenyl)‐1,4,7,10‐tetraazacyclododecane ( 1b ), which on their part react with bromoacetic acid tert‐butyl ester in CH₃CN to give 1‐(2‐propenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid tert‐butyl ester ( 2a ) and 1‐(3‐butenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid tert‐butyl ester ( 2b ), respectively. Compounds 2a and 2b are converted into the corresponding acids 1‐(2‐propenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid ( 4a ) (MPC) and 1‐(3‐butenyl)‐1,4,7,10‐tetraazacyclododecane‐4,7,10‐tris‐acetic acid ( 4b ) (MBC) via the trifluoroacetates 3a and 3b . Sm(NO₃)₃(H₂O)₆, LuCl₃(THF)₃, and TmCl₃(H₂O)₆ react with 4a and 4b forming the lanthanide complexes Sm(MPC) ( 5 ), Lu(MPC) ( 6 ), Tm(MPC) ( 7a ) and Tm(MBC) ( 7b ). The IR as well as the ¹H and ¹³C NMR spectra of the new compounds are reported and discussed.     

Elaboration of 1,8‐naphthyridine‐2,7‐dicarboxaldehyde into novel 2,7‐dimethylimine derivatives

The known 1,8‐naphthyridine‐2,7‐dicarboxaldehyde was prepared by SeO₂ oxidation of 2,7‐dimethyl‐1,8‐naphthyridine. The dimethylated naphthyridine molecule was assembled from an adaptation of the Skraup synthesis using 2‐amino‐6‐methylpyridine and crotonaldehyde to afford a reproducible 37% yield, and constitute a significant advance over the literature of this reaction. The condensation of 1,8‐naph‐thyridine‐2,7‐dicarboxaldehyde with various primary amines (R = ‐C₆H₁₁, ‐CH₂C₆H₅, ‐C(CH₃)₃, ‐C₁₀H₁₅, and CH₂CH₂SCH₂CH₃) in alcohol affords diimines 1(a‐e) . The inherent crystallinity of 1(a‐e) affords pure compounds in reasonable to excellent yields (ca. 70%) after evaporation of solvent and recrystallization. The anticipated spectroscopic features of (N=C‐H) ¹H nmr shift and v(C=N) in the ir spectrum appear around 8.50 δ and 1640 cm^?1, respectively, for the series 1(a‐e) . These novel naph‐thyridines typically display the signature ¹H nmr doublets at ca. 8.15‐8.30 δ ascribed to the 3 and 4 naphthyridine protons, consistent with a mirror plane (through the quaternary carbons) perpendicular to the naphthyridine plane, and syn, syn relationships of the naphthyridine moiety with each imine nitrogen lone pair. Complexation studies of 1(a‐e) with transition metals of biological relevance such as copper(I) and copper(II) will be reported elsewhere.     

Topological identification of the first uninodal 8‐connected lsz MOF built from 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylate pillars and cadmium(II)–triazolate layers

Using polynuclear metal clusters as nodes, many high‐symmetry high‐connectivity nets, like 8‐connnected bcu and 12‐connected fcu , have been attained in metal–organic frameworks (MOFs). However, construction of low‐symmetry high‐connected MOFs with a novel topology still remains a big challenge. For example, a uninodal 8‐connected lsz network, observed in inorganic ZrSiO₄, has not been topologically identified in MOFs. Using 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylic acid (H₂L) as a new linker and 1,2,4‐triazole (Htrz) as a coligand, a novel three‐dimensional Cd^II–MOF, namely poly[tetrakis(μ₄‐2,2′‐difluorobiphenyl‐4,4′‐dicarboxylato‐κ⁵O¹,O^1′:O^1′:O⁴:O^4′)tetrakis(N,N‐dimethylformamide‐κO)tetrakis(μ₃‐1,2,4‐triazolato‐κ³N¹:N²:N⁴)hexacadmium(II)], [Cd₆(C₁₄H₆F₂O₄)₄(C₂H₂N₃)₄(C₃H₇NO)₄]_n, (I), has been prepared. Single‐crystal structure analysis indicates that six different Cd^II ions co‐exist in (I) and each Cd^II ion displays a distorted [CdO₄N₂] octahedral geometry with four equatorial O atoms and two axial N atoms. Three Cd^II ions are connected by four carboxylate groups and four trz⁻ ligands to form a linear trinuclear [Cd₃(COO)₄(trz)₄] cluster, as do the other three Cd^II ions. Two Cd₃ clusters are linked by trz⁻ ligands in a μ_1,2,4‐bridging mode to produce a two‐dimensional Cd^II–triazolate layer with (6,3) topology in the ab plane. These two‐dimensional layers are further pillared by the L²⁻ ligands along the c axis to generate a complicated three‐dimensional framework. Topologically, regarding the Cd₃ cluster as an 8‐connected node, the whole architecture of (I) is a uninodal 8‐connected lsz framework with the Schläfli symbol (4²²·6⁶). Complex (I) was further characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction, thermogravimetric analysis and a photoluminescence study. MOF (I) has a high thermal and water stability.     

Powder study of poly[(μ2‐2,2‐dimethylpropane‐1,3‐diyl diisocyanide)‐μ2‐iodido‐silver(I)]

In order to explore the chemistry of the bidentate ligand 2,2‐dimethylpropane‐1,3‐diyl diisocyanide and to investigate the effect of counter‐ions on the polymeric structure of (2,2‐dimethylpropane‐1,3‐diyl diisocyanide)silver(I) complexes, the title polymeric compound, [AgI(C₇H₁₀N₂)]_n, was synthesized by treatment of 2,2‐dimethylpropane‐1,3‐diyl diisocyanide with AgI. X‐ray powder diffraction studies show, as expected, a polymeric structure, similar to the very recently reported Cl⁻ and NO₃⁻ analogues [AgX(C₇H₁₀N₂)]_n (X = Cl⁻ or NO₃⁻). In the title structure, the Ag^I centre is bridged to two adjacent Ag^I neighbours by bidentate 2,2‐dimethylpropane‐1,3‐diyl diisocyanide ligands via the NC groups to form [Ag{CNCH₂C(CH₃)₂CH₂NC}]_n chains. The iodide counter‐ions crosslink the Ag^I centres of the chains to form a two‐dimensional polymeric {[Ag{CNCH₂C(CH₃)₂CH₂NC}]I}_n network. This study also shows that this bidentate ligand forms similar polymeric structures on treatment with AgX, regardless of the nature of the counter‐ion X⁻, and also has a strong tendency to form polymeric complexes rather than dimeric or trimeric ones.     

Asymmetric Construction of Pyrrolidines Bearing a Trifluoromethylated Quaternary Stereogenic Center via CuI‐Catalyzed 1,3‐Dipolar Cycloaddition of Azomethine Ylides with β‐CF3‐β,β‐Disubstituted Nitroalkenes

A direct and convenient method has been developed for the synthesis of optically active pyrrolidines bearing a quaternary stereogenic center containing a CF₃ group at the C‐3 position of the pyrrolidine ring. The synthesis system, Cu^I/Si‐FOXAP‐catalyzed exo‐selective 1,3‐dipolar cycloaddition of azomethine ylides with β‐CF₃‐β,β‐disubstituted nitroalkenes, provides pyrrolidines with high diastereoselectivities (up to >98:2 d.r.) and excellent enantioselectivities (up to >99.9 ee) and performs well for a broad scope of substrates under mild conditions.     

Synthesis and Conformational Analysis of 1′‐ and 3′‐Substituted 2‐Deoxy‐2‐fluoro‐D‐ribofuranosyl Nucleosides

Convergent syntheses of the 9‐(3‐X‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranosyl)adenines 5 (X=N₃) and 7 (X=NH₂), as well as of their respective α‐anomers 6 and 8 , are described, using methyl 2‐azido‐5‐O‐benzoyl‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranoside ( 4 ) as glycosylating agent. Methyl 5‐O‐benzoyl‐2,3‐dideoxy‐2,3‐difluoro‐β‐D ‐ribofuranoside ( 12 ) was prepared starting from two precursors, and coupled with silylated N⁶‐benzoyladenine to afford, after deprotection, 2′,3′‐dideoxy‐2′,3′‐difluoroadenosine ( 13 ). Condensation of 1‐O‐acetyl‐3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐β‐D ‐ribofuranose ( 14 ) with silylated N²‐palmitoylguanine gave, after chromatographic separation and deacylation, the N⁷‐β‐anomer 17 as the main product, along with 2′‐deoxy‐2′‐fluoroguanosine ( 15 ) and its N⁹‐α‐anomer 16 in a ratio of ca. 42 : 24 : 10. An in‐depth conformational analysis of a number of 2,3‐dideoxy‐2‐fluoro‐3‐X‐D ‐ribofuranosides (X=F, N₃, NH₂, H) as well as of purine and pyrimidine 2‐deoxy‐2‐fluoro‐D ‐ribofuranosyl nucleosides was performed using the PSEUROT (version 6.3) software in combination with NMR studies.     

Di‐μ‐sulfito‐bis­[(4,4′‐di­methyl‐2,2′‐bi­pyridine)­zinc(II)] dihydrate and poly­[[aqua(1,10‐phenanthroline)­zinc(II)]‐μ3‐sulfito‐zinc(II)‐μ3‐sulfito]

Two different zinc sulfite compounds have been prepared through the decomposition of pyrosulfite–­di­thionite ions in aqueous solution, viz. a dimeric complex, di‐μ‐sulfito‐κ³O,O′:O′′;κ³O:O′,O′′‐bis­[(4,4′‐di­methyl‐2,2′‐bi­pyridine‐κ²N,N′)­zinc(II)] dihydrate, [Zn₂(SO₃)₂(C₁₂H₁₂N₂)₂]·2H₂O, (I), which was solved and refined from a twinned sample, and an extended polymer, poly­[[aqua(1,10‐phenanthroline‐κ²N,N′)­zinc(II)]‐μ₃‐sulfito‐κ²O:O′:O′′‐zinc(II)‐μ₃‐sulfito‐κ³O:O:O′], [Zn₂(SO₃)₂(C₁₂H₁₀N₂)(H₂O)]_n, (II). In (I), the dinuclear Zn^II complex has a center of symmetry. The cation is five‐coordinate in a square‐pyramidal arrangement, the anion fulfilling a bridging chelating role. Compound (II) comprises two different zinc units, one being five‐coordinate (square pyramidal) and the other four‐coordinate (trigonal pyramidal), and two independent sulfite groups with different binding modes to the cationic centers.     

N,N, N′, N′‐Tetrakis(diphenylphosphanyl)‐1, 3‐diaminobenzene as a Bis‐chelate Ligand in [1, 3‐{cis‐Mo(CO)4(PPh2)2N}2C6H4]

1, 3‐Diaminobenzene reacts readily with PPh₂Cl to give N, N, N′, N′‐tetrakis(diphenylphosphanyl)‐1, 3‐diaminobenzene ( 1 ) in excellent yield. The dinuclear complex [1, 3‐{cis‐Mo(CO)₄(PPh₂)₂N}₂C₆H₄] ( 2 ) is obtained in high yield from 1 and cis‐[Mo(CO)₄(NCEt)₂]. Compounds 1 and 2 were characterized by NMR spectroscopy (¹H, ¹³C, ³¹P) and by crystal structure determination. The latter shows the formation of a bis‐chelate complex with Mo‐P‐N‐P four‐membered rings.     

Synthesis,Bioactivities and Structure Activity Relationship of N‐4‐Methyl‐1,2,3‐thiadiazole‐5‐carbonyl‐N′‐phenyl Ureas

Twenty nine novel N‐4‐methyl‐1,2,3‐thiadiazole‐5‐carbonyl‐N′‐phenyl ureas were designed and synthesized, and their structures were confirmed by proton nuclear magnetic resonance (¹H NMR), infra red spectroscopy (IR) and high‐resolution mass spectroscopy (HRMS). Compounds V‐9 , V‐11 , V‐12 , V‐15 , V‐19 , V‐21 , V‐22 and V‐24 exhibit excellent activity against Culex pipiens pallens. Compounds V‐12 and V‐22 present good insecticidal activity against Plutella xylostella L. Their median lethal concentrations (LC₅₀) are 164.15 and 89.69 mg·L^?1, respectively. Compound V‐11 also has potential wide spectrum of fungicide activity. Its median effective concentrations (EC₅₀) detected from 3.82 µg·mL^?1 against Physalospora piricola to 31.60 µg·mL^?1 against Cercospora arachidicola. Compounds V‐15 and V‐24 show outstanding induction activities as same as positive controls TDL and ningnanmycin, furthermore V‐24 has the highest induction activity of 41.85%±4.43%. To elucidate the structure activity relationship in these compounds, a 3D‐QSAR model has been built. The established model showed a reliable predicting ability with q² values of 0.643 and r² values of 0.982.