Tuning Internal Strain in Metal–Organic Frameworks via Vapor Phase Infiltration for CO2 Reduction

A gas-phase approach to form Zn coordination sites on metal–organic frameworks (MOFs) by vapor-phase infiltration (VPI) was developed. Compared to Zn sites synthesized by the solution-phase method, VPI samples revealed approximately 2.8 % internal strain. Faradaic efficiency towards conversion of CO₂ to CO was enhanced by up to a factor of four, and the initial potential was positively shifted by 200–300 mV. Using element-specific X-ray absorption spectroscopy, the local coordination environment of the Zn center was determined to have square-pyramidal geometry with four Zn−N bonds in the equatorial plane and one Zn-OH₂ bond in the axial plane. The fine-tuned internal strain was further supported by monitoring changes in XRD and UV/Visible absorption spectra across a range of infiltration cycles. The ability to use internal strain to increase catalytic activity of MOFs suggests that applying this strategy will enhance intrinsic catalytic capabilities of a variety of porous materials.     

Zirconium–Porphyrin‐Based Metal–Organic Framework Hollow Nanotubes for Immobilization of Noble‐Metal Single Atoms

Single atoms immobilized on metal–organic frameworks (MOFs) with unique nanostructures have drawn tremendous attention in the application of catalysis but remain a great challenge. Various single noble‐metal atoms have now been successfully anchored on the well‐defined anchoring sites of the zirconium porphyrin MOF hollow nanotubes, which are probed by aberration‐corrected scanning transmission electron microscopy and synchrotron‐radiation‐based X‐ray absorption fine‐structure spectroscopy. Owing to the hollow structure and excellent photoelectrochemical performance, the HNTM‐Ir/Pt exhibits outstanding catalytic activity in the visible‐light photocatalytic H₂ evolution via water splitting. The single atom immobilized on MOFs with hollow structures are expected to pave the way to expand the potential applications of MOFs.     

Atomically Precise Crystalline Materials Based on Kinetically Inert Metal Ions via Reticular Mechanopolymerization

Atomistic control of the coordination environment of lattice ions and the distribution of metal sites within crystalline mixed‐metal coordination polymers remain significant synthetic challenges. Herein is reported the mechanochemical synthesis of a reticular family of crystalline heterobimetallic metal–organic frameworks (MOFs) is now achieved by polymerization of molecular Ru₂[II,III] complexes, featuring unprotected carboxylic acid substituents, with Cu(OAc)₂. The resulting crystalline heterobimetallic MOFs are solid solutions of Ru₂ and Cu₂ sites housed within [M₃L₂] phases. The developed mechanochemical strategy is modular and allows for systematic control of the primary coordination sphere of the Ru₂ sites within an isoreticular family of materials. This strategy is anticipated to provide a rational approach to atomically precise mixed‐metal materials.     

Microporous assembly and shape control of a new Zn metal–organic framework: Morphology‐dependent catalytic performance

A new metal–organic framework (MOF), [Zn(ATA)(bpd)]_∝ ( 1Zn ) (ATA: 2‐aminoterephthalic acid; bpd: 1,4‐bis(4‐pyridyl)‐2,3‐diaza‐1,3‐butadiene), exhibiting a three‐dimensional extended porous structure was successfully assembled in a MeOH–H₂O solvent system. Under various controlled conditions, 1Zn was obtained in a variety of morphologies such as microspheres, microblocks, microsheets, microplates and microrods. The catalytic performance of the 1Zn microsized MOF was evaluated, and a possible catalytic mechanism was proposed. The flexibility of this MOF assembly strategy for shape control will certainly enhance new potential applications of micro?/nano?MOFs.     

Catalytic Glucose Isomerization by Porous Coordination Polymers with Open Metal Sites

Highly efficient catalytic isomerization reactions from glucose to fructose in aqueous media using porous coordination polymers (PCPs) or metal–organic frameworks (MOFs) is reported for the first time. The catalytic activity of PCPs functionalized with ? NH₂, ? (CH₃)₂, ? NO₂, and ? SO₃H groups on the pore surface is systematically tested. The catalytic activity can be tuned by the acidity of open metal sites (OMSs) by modifying the organic linkers with the functional groups. As a result, it is demonstrated that MIL‐101 functionalized with ? SO₃H not only shows high conversion of glucose but also selectively produces fructose. Further, catalytic one‐pot conversion of amylose to fructose is achieved, thanks to the high stability of the framework in an acidic solution. These results show that MOF/PCP compounds having OMSs are promising materials for various useful heterogeneous catalytic reactions, in particular in the biomass field.     

Porous GdIII‐Organic Framework as a Dual‐Functional Material for Cyanosilylation of Aldehydes and Ablation of Human Liver Cancer Cells

Metal‐organic frameworks (MOFs) have gained great attention in recent years because they could behave as multifunctional materials which combine the advances of porous solids and coordination complexes. With the aim of constructing multifunctional MOFs, in this study, we choose a Y‐shaped tricarboxylic ligand biphenyl‐3,4′,5‐tricarboxylic acid (H₃bpt) to react with Gd^III ions to afford a new dual‐functional lanthanide‐organic framework with the chemical formula of [Gd₂(bpt)₂(H₂O)₂] · (DMF)₂(H₂O)₆ ( 1 ) (DMF = N,N‐dimethylformamide) under solvothermal condition. The title complex was characterized by means of elemental analysis, FT‐IR spectroscopy, thermogravimetric and X‐ray diffraction analyses. Crystal structure analysis reveals that compound 1 is composed of 1D helical chain secondary building units that connect by the bpt^3– ligands into a 3D framework with 1D nanosized channels running along the b axis. In view of its high porosity and accessible open metal sites, the activated 1 ( 1a ) was studied for the cyanosilylation of aldehydes under solvent‐free conditions. The catalytic activity of 1a is much higher than that of compound 1 , indicating that the exposed open metal sites of 1a is beneficial to the cyanosilylation reaction. In connection to these, the different cytotoxicities of 1 and 1a were also evaluated on four human liver cancer cells (SMMC‐7721, Bel‐7402, MHCC97 and Hep3B) by the MTT assay.     

A self‐penetrated three‐dimensional zinc(II) coordination framework based on 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid and 1,3‐bis[(imidazol‐1‐yl)methyl]benzene ligands: synthesis,structure and properties

With the rapid development of metal–organic frameworks (MOFs), a variety of MOFs and their derivatives have been synthesized and reported in recent years. Commonly, multifunctional aromatic polycarboxylic acids and nitrogen‐containing ligands are employed to construct MOFs with fascinating structures. 4,4′,4′′‐(1,3,5‐Triazine‐2,4,6‐triyl)tribenzoic acid (H₃TATB) and the bidentate nitrogen‐containing ligand 1,3‐bis[(imidazol‐1‐yl)methyl]benzene (bib) were selected to prepare a novel Zn^II‐MOF under solvothermal conditions, namely poly[[tris{μ‐1,3‐bis[(imidazol‐1‐yl)methyl]benzene}bis[μ₃‐4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoato]trizinc(II)] dimethylformamide disolvate trihydrate], {[Zn₃(C₂₄H₁₂N₃O₆)₂(C₁₄H₁₄N₄)₃]·2C₃H₇NO·3H₂O}_n ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction, IR spectroscopy and powder X‐ray diffraction. The properties of 1 were investigated by thermogravimetric and fluorescence analysis. Single‐crystal X‐ray diffraction shows that 1 belongs to the monoclinic space group Pc. The asymmetric unit contains three crystallographically independent Zn^II centres, two 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoate (TATB^3?) anions, three complete bib ligands, one and a half free dimethylformamide molecules and three guest water molecules. Each Zn^II centre is four‐coordinated and displays a distorted tetrahedral coordination geometry. The Zn^II centres are connected by TATB^3? anions to form an angled ladder chain with large windows. Simultaneously, the bib ligands link Zn^II centres to give a helical Zn–bib–Zn chain. Furthermore, adjacent ladders are bridged by Zn–bib–Zn chains to form a fascinating three‐dimensional self‐penetrated framework with the short Schläfli symbol 6⁵·7·8¹³·9·10. In addition, the luminescence properties of 1 in the solid state and the fluorescence sensing of metal ions in suspension were studied. Significantly, compound 1 shows potential application as a fluorescent sensor with sensing properties for Zr⁴⁺ and Cu²⁺ ions.     

Direct Visualization of Atomic Structure in Multivariate Metal-Organic Frameworks (MOFs) for Guiding Electrocatalysts Design

The direct utilization of metal–organic frameworks (MOFs) for electrocatalytic oxygen evolution reaction (OER) has attracted increasing interests. Herein, we employ the low-dose integrated differential phase contrast-scanning transmission electron microscopy (iDPC-STEM) technique to visualize the atomic structure of multivariate MOFs (MTV-MOFs) for guiding the structural design of bulk MOFs for efficient OER. The iDPC-STEM images revealed that incorporating Fe³⁺ or 2-aminoterephthalate (ATA) into Ni-BDC (BDC: benzenedicarboxylate) can introduce inhomogeneous lattice strain that weaken the coordination bonds, which can be selectively cleaved via a mild heat treatment to simultaneously generate coordinatively unsaturated metal sites, conductive Ni@C and hierarchical porous structure. Thus, excellent OER activity with current densities of 10 and 100 mA cm⁻² are achieved over the defective MOFs at small overpotentials of 286 mV and 365 mV, respectively, which is superior to the commercial RuO₂ catalyst and most of the bulk MOFs.     

Lithium zincopyrophosphate,Li2Zn3(P2O7)2

The title compound, dilithium(I) trizinc(II) bis[diphosphate(4−)], is the first quaternary lithium zincopyrophosphate in the Li–Zn–P–O system. It features zigzag chains running along c, which are built up from edge‐sharing [ZnO₅] trigonal bipyramids. One of the two independent Zn sites is fully occupied, whereas the other is statistically disordered by Zn²⁺ and Li⁺ cations, although the two Zn sites have similar coordination environments. Li⁺ cations occupy a four‐coordinated independent site with an occupancy factor of 0.5, as well as being disordered on the partially occupied five‐coordinated Zn site with a Zn²⁺/Li⁺ ratio of 1:1.     

A Bismuth-Based Zeolitic Organic Framework with Coordination-Linked Metal Cages for Efficient Electrocatalytic CO2 Reduction to HCOOH

Zeolitic metal–organic frameworks (ZMOFs) have emerged as one of the most promsing catalysts for energy conversion, but they suffer from either weak bonding between metal-organic cubes (MOCs) that decrease their stability during catalysis processes or low activity due to inadequate active sites. In this work, through ligand-directing strategy, we successfully obtain an unprecedented bismuth-based ZMOF (Bi-ZMOF) featuring a ACO topological crystal structure with strong coordination bonding between the Bi-based cages. As a result, it enables efficient reduction of CO₂ to formic acid (HCOOH) with Faradaic efficiency as high as 91 %. A combination of in situ surface-enhanced infrared absorption spectroscopy and density functional theory calculation reveals that the Bi−N coordination contributes to facilitating charge transfer from N to Bi atoms, which stabilize the intermediate to boost the reduction efficiency of CO₂ to HCOOH. This finding highlights the importance of the coordination environment of metal active sites on electrocatalytic CO₂ reduction. We believe that this work will offer a new clue to rationally design zeolitic MOFs for catalytic reaction     

Framework Cationization by Preemptive Coordination of Open Metal Sites for Anion‐Exchange Encapsulation of Nucleotides and Coenzymes

Cationic frameworks can selectively trap anions through ion exchange, and have applications in ion chromatography and drug delivery. However, cationic frameworks are much rarer than anionic or neutral ones. Herein, we propose a concept, preemptive coordination (PC), for targeting positively charged metal–organic frameworks (P‐MOFs). PC refers to proactive blocking of metal coordination sites to preclude their occupation by neutralizing ligands such as OH^?. We use 20 MOFs to show that this PC concept is an effective approach for developing P‐MOFs whose high stability, porosity, and anion‐exchange capability allow immobilization of anionic nucleotides and coenzymes, in addition to charge‐ and size‐selective capture or separation of organic dyes. The CO₂ and C₂H₂ uptake capacity of 117.9 cm³ g^?1 and 148.5 cm³ g^?1, respectively, at 273 K and 1 atm, is exceptionally high among cationic framework materials.     

Boosting Electrochemical CO2 Reduction on Metal–Organic Frameworks via Ligand Doping

Electrochemical CO₂ reduction relies on the availability of highly efficient and selective catalysts. Herein, we report a general strategy to boost the activity of metal–organic frameworks (MOFs) towards CO₂ reduction via ligand doping. A strong electron‐donating molecule of 1,10‐phenanthroline was doped into Zn‐based MOFs of zeolitic imidazolate framework‐8 (ZIF‐8) as CO₂ reduction electrocatalyst. Experimental and theoretical evidences reveal that the electron‐donating nature of phenanthroline enables a charge transfer, which induces adjacent active sites at the sp² C atoms in the imidazole ligand possessing more electrons, and facilitates the generation of *COOH, hence leading to improved activity and Faradaic efficiency towards CO production.     

Spray‐Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO‐66‐NCS MOF was formed by postsynthetic modification of UiO‐66‐NH₂. The UiO‐66‐NCS MOFs displays a circa 20‐fold increase in activity against the chemical warfare agent simulant dimethyl‐4‐nitrophenyl phosphate (DMNP) compared to UiO‐66‐NH₂, making it the most active MOF materials using a validated high‐throughput screening. The ?NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine‐terminated polypropylene polymers (Jeffamines) through a facile room‐temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray‐coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray‐coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

Monitoring and Understanding the Paraelectric–Ferroelectric Phase Transition in the Metal–Organic Framework [NH4][M(HCOO)3] by Solid‐State NMR Spectroscopy

The paraelectric–ferroelectric phase transition in two isostructural metal–organic frameworks (MOFs) [NH₄][M(HCOO)₃] (M=Mg, Zn) was investigated by in situ variable‐temperature ²⁵Mg, ⁶⁷Zn, ¹⁴N, and ¹³C solid‐state NMR (SSNMR) spectroscopy. With decreasing temperature, a disorder–order transition of NH₄⁺ cations causes a change in dielectric properties. It is thought that [NH₄][Mg(HCOO)₃] exhibits a higher transition temperature than [NH₄][Zn(HCOO)₃] due to stronger hydrogen‐bonding interactions between NH₄⁺ ions and framework oxygen atoms. ²⁵Mg and ⁶⁷Zn NMR parameters are very sensitive to temperature‐induced changes in structure, dynamics, and dielectric behavior; stark spectral differences across the paraelectric–ferroelectric phase transition are intimately related to subtle changes in the local environment of the metal center. Although ²⁵Mg and ⁶⁷Zn are challenging nuclei for SSNMR experiments, the highly spherically symmetric metal‐atom environments in [NH₄][M(HCOO)₃] give rise to relatively narrow spectra that can be acquired in 30–60 min at a low magnetic field of 9.4 T. Complementary ¹⁴N and ¹³C SSNMR experiments were performed to probe the role of NH₄⁺–framework hydrogen bonding in the paraelectric–ferroelectric phase transition. This multinuclear SSNMR approach yields new physical insights into the [NH₄][M(HCOO)₃] system and shows great potential for molecular‐level studies on electric phenomena in a wide variety of MOFs.     

Structural Insight into Binary Protein Metal–Organic Frameworks with Ferritin Nanocages as Linkers and Nickel Clusters as Nodes

Metal–organic frameworks (MOFs) hold great promise for numerous applications. However, proteins, carriers of biological functions in living systems, have not yet been fully explored as building blocks for the construction of MOFs. This work presents a strategy for the fabrication of binary MOFs. Considering octahedral ferritin symmetry, four His₂ (His–His) motifs were first incorporated into the exterior surface of a ferritin nanocage near each C₄ channel, yielding protein linkers with multiple metal-binding sites (bisH-SF). Secondly, by adding nickel ions to bisH-SF solutions triggers the self-assembly of ferritin nanocages into a porous 3D crystalline MOF with designed protein lattice, where two adjacent ferritin molecules along the C₄ symmetry axes are bridged by four dinuclear or tetranuclear nickel clusters depending on Ni²⁺ concentration. This work provides a simple approach for precise control over a binary protein–metal crystalline framework, and the resulting MOFs exhibited inherent ferroxidase activity and peroxidase-like catalytic activity.     

Directed anisotropy in bis(acetato‐κ2O,O′)diaquazinc(II) at 110 and 250 K

The molecule of the title compound, [Zn(C₂H₃O₂)₂(H₂O)₂], is located on a twofold axis in the crystal structure. The displacement parameters and the thermal expansion of the crystal show significant anisotropy. This is explained by the two‐dimensional hydrogen‐bonded structure, with only very weak interactions perpendicular to it. Besides the overall molecular motion, there are internal vibrations, which cause the Zn—O(carboxylate) bonds to fail the Hirshfeld rigid‐bond test. It is shown that this can be interpreted in terms of the steric strain in the four‐membered chelate ring due to the bidentate carboxylate coordination.     

The crystal structure of Mg51Zn20

The crystal structure of Mg₅₁Zn₂₀, a phase designated conventionally as “Mg₇Zn₃,” has been determined by the single-crystal X-ray diffraction method. It was solved by the examination of a Patterson synthesis, and refined by the ordinary Fourier and least-squares method; the R value obtained was 4.8% for 1167 observed reflections. The crystal is orthorhombic, space group Immm, with a = 14.083(3), b = 14.486(3), c = 14.025(3) Å, and Z = 2. There are 18 independent atomic sites, Zn1Zn6, Mg1Mg10, A, and B, and the last two sites are statistically occupied by Zn and Mg atoms with the occupancies; 0.46(2)Zn7 + 0.52(2)Mg11 and 0.24(2)Zn8 + 0.74(2)Mg12, for A and B, respectively. The structure of the crystal is described as an arrangement of icosahedral coordination polyhedra, to which all the atomic sites but Zn3 site belong. In this arrangement the Zn atoms other than the Zn3 and Zn8(B) center the icosahedral coordination polyhedra with coordination number 12. The Zn3, Zn8 atoms, and all the Mg atoms except Mg11(A) are located at the centers of various coordination polyhedra with the coordination numbers from 11 to 15. The distances between neighboring atoms are 2.71–3.07, 2.82–3.65, and 2.60–3.20 Å for ZnZn, MgMg, and ZnMg, respectively.     

Design,Synthesis, and X‐Ray Crystal Structure of a Fullerene‐Linked Metal–Organic Framework

Given the unique structural and electronic properties of C₆₀, metal–organic frameworks (MOFs) containing C₆₀ linkers are expected to exhibit interesting characteristics. A new hexakisfullerene derivative possessing two pairs of phenyl pyridine groups attached to two methano‐carbon atoms located at the trans‐1 positions was designed and synthesized. The four pyridyl nitrogen atoms define a perfectly planar rectangle. This new C₆₀ derivative was used to assemble the first fullerene‐linked two‐dimensional MOF by coordination with Cd²⁺.     

Design,Synthesis, and X‐Ray Crystal Structure of a Fullerene‐Linked Metal–Organic Framework

Given the unique structural and electronic properties of C₆₀, metal–organic frameworks (MOFs) containing C₆₀ linkers are expected to exhibit interesting characteristics. A new hexakisfullerene derivative possessing two pairs of phenyl pyridine groups attached to two methano‐carbon atoms located at the trans‐1 positions was designed and synthesized. The four pyridyl nitrogen atoms define a perfectly planar rectangle. This new C₆₀ derivative was used to assemble the first fullerene‐linked two‐dimensional MOF by coordination with Cd²⁺.     

Adsorption of Carbon Dioxide on Unsaturated Metal Sites in M2(dobpdc) Frameworks with Exceptional Structural Stability and Relation between Lewis Acidity and Adsorption Enthalpy

A series of metal–organic frameworks (MOFs) M₂(dobpdc) (M=Mn, Co, Ni, Zn; H₄dobpdc=4,4′‐dihydroxy‐1,1′‐biphenyl‐3,3′‐dicarboxylic acid), with a highly dense arrangement of open metal sites along hexagonal channels were prepared by microwave‐assisted or simple solvothermal reactions. The activated materials were structurally expanded when guest molecules including CO₂ were introduced into the pores. The Lewis acidity of the open metal sites varied in the order Mn<Co<Ni>Zn, as confirmed by C=O stretching bands in the IR spectra, which are related to the CO₂ adsorption enthalpy. DFT calculations revealed that the high CO₂ binding affinity of transition‐metal‐based M₂(dobpdc) is primarily attributable to the favorable charge transfer from CO₂ (oxygen lone pair acting as a Lewis base) to the open metal sites (Lewis acid), while electrostatic effects, the underlying factor responsible for the particular order of binding strength observed across different transition metals, also play a role. The framework stability against water coincides with the order of Lewis acidity. In this series of MOFs, the structural stability of Ni₂(dobpdc) is exceptional; it endured in water vapor, liquid water, and in refluxing water for one month, and the solid remained intact on exposure to solutions of pH 2–13. The DFT calculations also support the experimental finding that Ni₂(dobpdc) has higher chemical stability than the other frameworks.