An η3-Bound Allyl Ligand on Magnesium in a Mechanochemically Generated Mg/K Allyl Complex

Milling two equivalents of K[1,3-(SiMe₃)₂C₃H₃] (=K[A′]) with MgX₂ (X=Cl, Br) produces the allyl complex [K₂MgA′₄] ( 1 ). Crystals grown from toluene are of the solvated species [((η⁶-tol)K)₂MgA′₄] ([ 1 ⋅2(tol)]), a trimetallic monomer with both bridging and terminal (η¹) allyl ligands. When recrystallized from hexanes, the unsolvated 1 forms a 2D coordination polymer, in which the Mg is surrounded by three allyl ligands. The C−C bond lengths differ by only 0.028 Å, indicating virtually complete electron delocalization. This is an unprecedented coordination mode for an allyl ligand bound to Mg. DFT calculations indicate that in isolation, an η³-allyl configuration on Mg is energetically preferred over the η¹- (σ-bonded) arrangement, but the Mg must be in a low coordination environment for it to be experimentally realized. Methyl methacrylate is effectively polymerized by 1 , with activities that are comparable to K[A′] and greater than the homometallic magnesium complex [{MgA′₂}₂].     

Interaction between Anions and Molybdenum Allyl Dicarbonyl Complexes of 1,4,7‐Trithiacyclononane

The labile complex [MoCl(η³‐methallyl)(CO)₂(NCMe)₂] reacts with the ligand 1,4,7‐trithiacyclononane ([9]aneS₃) and the salt NaBAr′₄ to afford [Mo(η³‐methallyl)(CO)₂([9]aneS₃)][BAr′₄] ( 1?BAr′₄ ). An analogous reaction of [MoBr(η³‐allyl)(CO)₂(NCMe)₂] yields [Mo(η³‐allyl)(CO)₂([9]aneS₃)][BAr′₄] ( 2?BAr′₄ ). The new compounds 1?BAr′₄ and 2?BAr′₄ were characterized by IR and NMR spectroscopic analysis and X‐ray diffraction studies. Both compounds feature the cyclic thioether [9]aneS₃ coordinated as a tridentate ligand to the molybdenum center. The allyl ligand in 2?BAr′₄ is aligned with the middle of the OC‐Mo‐CO angle, which is acute. Both of these features are typical of most pseudo‐octahedral allyl dicarbonyl molybdenum complexes. In contrast, the allyl group is rotated in 1?BAr′₄ , which is attributed to steric hindrance between the methyl substituent and the ligated thioether, and the OC‐Mo‐CO angle is obtuse. Compound 1?BAr′₄ undergoes rapid substitution of [9]aneS₃ by either chloride and fluoride ions in dichloromethane, and the products include the known species [{Mo(η³‐methallyl)(CO)₂}₂(μ‐Cl)₃]^? and a structurally similar new anionic complex with two fluoro and one hydroxo bridging ligands, respectively. Stable supramolecular adducts were formed in the reactions of 1?BAr′₄ and 2?BAr₄ with bromide, iodide, hydrogensulfate, and methanesulfonate compounds. The binding constants of these adducts in dichloromethane were calculated from ¹H NMR spectroscopic titration data, and the solid‐state structures of the 1?Br , 1?HSO₄ , 1?I , and 2?I adducts were determined by X‐ray diffraction studies. The surprising slightly higher stability of the iodide adduct relative to that of bromide was investigated theoretically, with the results pointing to an effect of the differential solvation of the halide ions.     

The Counterion Effect on the Assembly of Coordination Networks of Cationic (η3‐Allyl)palladium Complexes Containing 3,5‐Dimethyl‐4‐nitro‐1H‐pyrazole

Two new (η³‐allyl)palladium complexes containing the ligand 3,5‐dimethyl‐4‐nitro‐1H‐pyrazole (Hdmnpz) were synthesized and characterized as [Pd(η³‐C₃H₅)(Hdmnpz)₂]BF₄ ( 1 ) and [Pd(η³‐C₃H₅)(Hdmnpz)₂]NO₃ ( 2 ). The structures of these compounds were determined by single‐crystal X‐ray diffraction to evaluate the intermolecular assembly. Each complex exhibits similar coordination behavior consistent with cationic entities comprised of two pyrazole ligands coordinated with the [Pd(η³‐C₃H₅)]⁺ fragment in an almost square‐planar coordination geometry. In 1 , the cationic entities are propagated through strong intermolecular H‐bonds formed between the pyrazole NH groups and BF ions in one‐dimensional polymer chains along the a axis. These chains are extended into two‐dimensional sheet networks via bifurcated H‐bonds. New intermolecular interactions established between NO₂ and Me substituents at the pyrazole ligand of neighboring sheets give rise to a three‐dimensional network. By contrast, compound 2 presents molecular cyclic dimers formed through N? H???O H‐bonds between two NO counterions and the pyrazole NH groups of two cationic entities. The dimers are also connected to each other through C? H???O H‐bonds between the remaining O‐atom of each NO ion and the allyl CH₂ H‐atom. Those interactions expand in a layer which lies parallel to the face (101).     

A Highly Asymmetric Gold(III) η3‐Allyl Complex

A highly asymmetric Au^III η³‐allyl complex has been generated by treating Au(η¹‐allyl)Br(tpy) (tpy=2‐(p‐tolyl)pyridine) with AgNTf₂. The resulting η³‐allyl complex has been characterized by NMR spectroscopy and X‐ray crystallography. DFT calculations and variable temperature ¹H NMR suggest that the allyl ligand is highly fluxional.     

A halide‐free pyridinium‐substituted η3‐cycloheptatrienide–Pd complex

We report the synthesis and characterization of a novel 4‐(dimethylamino)pyridinium‐substituted η³‐cycloheptatrienide–Pd complex which is free of halide ligands. Diacetonitrile{η³‐[4‐(dimethylamino)pyridinium‐1‐yl]cycloheptatrienido}palladium(II) bis(tetrafluoroborate), [Pd(C₂H₃N)₂(C₁₄H₁₆N₂)](BF₄)₂, was prepared by the exchange of two bromide ligands for noncoordinating anions, which results in the empty coordination sites being occupied by acetonitrile ligands. As described previously, exchange of only one bromide leads to a dimeric complex, di‐μ‐bromido‐bis({η³‐[4‐(dimethylamino)pyridinium‐1‐yl]cycloheptatrienido}palladium(II)) bis(tetrafluoroborate) acetonitrile disolvate, [Pd₂Br₂(C₁₄H₁₆N₂)₂](BF₄)₂·2CH₃CN, with bridging bromide ligands, and the crystal structure of this compound is also reported here. The structures of the cycloheptatrienide ligands of both complexes are analogous to the dibromide derivative, showing the allyl bond in the β‐position with respect to the pyridinium substituent. This indicates that, unlike a previous interpretation, the main reason for the formation of the β‐isomer cannot be internal hydrogen bonding between the cationic substituents and bromide ligands.     

Synthesis,Crystal Structure,and Emission Spectra of Lanthanum(III) Coordination Polymer with 1,5‐Naphthalenedisulfonate Ligand

The first two‐dimensional lanthanum(III) coordination polymer, [La(1,5‐NDS)_1.5(H₂O)₅]_n (1) (1,5‐NDS^2? = 1,5‐naphthalenedisulfonate), was synthesized and structurally characterized by single‐crystal X‐ray diffraction analysis. The disulfonate ligands act in the η¹:η¹:μ₂ and η¹:η¹:η¹:μ₃ binding modes to link the LaO₉ tricapped trigonal prisms into a lamellar structure. It exhibits strong purple emission in the solid state.     

Cationic Allyl Complexes of the Rare‐Earth Metals: Synthesis,Structural Characterization,and 1,3‐Butadiene Polymerization Catalysis

Monocationic bis‐allyl complexes [Ln(η³‐C₃H₅)₂(thf)₃]⁺[B(C₆X₅)₄]^? (Ln=Y, La, Nd; X=H, F) and dicationic mono‐allyl complexes of yttrium and the early lanthanides [Ln(η³‐C₃H₅)(thf)₆]²⁺[BPh₄]₂^? (Ln=La, Nd) were prepared by protonolysis of the tris‐allyl complexes [Ln(η³‐C₃H₅)₃(diox)] (Ln=Y, La, Ce, Pr, Nd, Sm; diox=1,4‐dioxane) isolated as a 1,4‐dioxane‐bridged dimer (Ln=Ce) or THF adducts [Ln(η³‐C₃H₅)₃(thf)₂] (Ln=Ce, Pr). Allyl abstraction from the neutral tris‐allyl complex by a Lewis acid, ER₃ (Al(CH₂SiMe₃)₃, BPh₃) gave the ion pair [Ln(η³‐C₃H₅)₂(thf)₃]⁺[ER₃(η¹‐CH₂CH?CH₂)]^? (Ln=Y, La; ER₃=Al(CH₂SiMe₃)₃, BPh₃). Benzophenone inserts into the La? C_allyl bond of [La(η³‐C₃H₅)₂(thf)₃]⁺[BPh₄]^? to form the alkoxy complex [La{OCPh₂(CH₂CH?CH₂)}₂(thf)₃]⁺[BPh₄]^?. The monocationic half‐sandwich complexes [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)(thf)₂]⁺[B(C₆X₅)₄]^? (Ln=Y, La; X=H, F) were synthesized from the neutral precursors [Ln(η⁵‐C₅Me₄SiMe₃)(η³‐C₃H₅)₂(thf)] by protonolysis. For 1,3‐butadiene polymerization catalysis, the yttrium‐based systems were more active than the corresponding lanthanum or neodymium homologues, giving polybutadiene with approximately 90 % 1,4‐cis stereoselectivity.     

Pentacoordinated Carboxylate π‐Allyl Nickel Complexes as Key Intermediates for the Ni‐Catalyzed Direct Amination of Allylic Alcohols

Direct amination of allylic alcohols with primary and secondary amines catalyzed by a system made of [Ni(1,5‐cyclooctadiene)₂] and 1,1′‐bis(diphenylphosphino)ferrocene was effectively enhanced by adding nBu₄NOAc and molecular sieves, affording the corresponding allyl amines in high yield with high monoallylation selectivity for primary amines and high regioselectivity for monosubstituted allylic alcohols. Such remarkable additive effects of nBu₄NOAc were elucidated by isolating and characterizing some nickel complexes, manifesting the key role of a charge neutral pentacoordinated η³‐allyl acetate complex in the present system, in contrast to usual cationic tetracoordinated complexes earlier reported in allylic substitution reactions.     

Dihydrogen Catalysis of the Reversible Formation and Cleavage of CH and NH Bonds of Aminopyridinate Ligands Bound to (η5‐C5Me5)IrIII

This study focuses on a series of cationic complexes of iridium that contain aminopyridinate (Ap) ligands bound to an (η⁵‐C₅Me₅)Ir^III fragment. The new complexes have the chemical composition [Ir(Ap)(η⁵‐C₅Me₅)]⁺, exist in the form of two isomers ( 1⁺ and 2⁺ ) and were isolated as salts of the BAr_F^? anion (BAr_F=B[3,5‐(CF₃)₂C₆H₃]₄). Four Ap ligands that differ in the nature of their bulky aryl substituents at the amido nitrogen atom and pyridinic ring were employed. In the presence of H₂, the electrophilicity of the Ir^III centre of these complexes allows for a reversible prototropic rearrangement that changes the nature and coordination mode of the aminopyridinate ligand between the well‐known κ²‐N,N′‐bidentate binding in 1⁺ and the unprecedented κ‐N,η³‐pseudo‐allyl‐coordination mode in isomers 2⁺ through activation of a benzylic C?H bond and formal proton transfer to the amido nitrogen atom. Experimental and computational studies evidence that the overall rearrangement, which entails reversible formation and cleavage of H?H, C?H and N?H bonds, is catalysed by dihydrogen under homogeneous conditions.     

Gold(III) π‐Allyl Complexes

Gold(III) π‐complexes have been authenticated recently with alkenes, alkynes, and arenes. The key importance of Pd^II π‐allyl complexes in organometallic chemistry (Tsuji–Trost reaction) prompted us to explore gold(III) π‐allyl complexes, which have remained elusive so far. The (P,C)Au^III(allyl) and (methallyl) complexes 3 and 3′ were readily prepared and isolated as thermally and air‐stable solids. Spectroscopic and crystallographic analyses combined with detailed DFT calculations support tight quasi‐symmetric η³‐coordination of the allyl moiety. The π‐allyl gold(III) complexes are activated towards nucleophilic additions, as substantiated with β‐diketo enolates.     

catena‐Poly[bis[(η2‐1‐allyl‐3‐aminopyridinium)copper(I)]‐di‐μ‐chloro‐copper(I)‐di‐μ‐chloro‐copper(I)‐di‐μ‐chloro]

Crystals of the title π‐complex, [Cu₄Cl₆(C₈H₁₁N₂)₂]_n, were obtained by means of alternating‐current electrochemical synthesis. The structure consists of infinite copper–chlorine chains to which 1‐allyl‐3‐amino­pyridinium moieties are attached via a η² Cu—(C=C) interaction. The two independent Cu atoms have distinct coordination environments. One is three‐coordinate, surrounded by two chloro ligands and the olefinic bond, whereas the second copper center is surrounded by a tetrahedral arrangement of four Cl atoms. The lower basicity of 3‐amino­pyridine as compared with 2‐ and 4‐amino­pyridine lowers the capacity of the organic ligand for donating to N—H⋯Cl hydrogen bonds and results in the formation of a large inorganic fragment.     

Photochemische Reaktionen von Cyclopentadienylbis(ethen)rhodium mit Phenanthren,Acenaphthylen und Triphenylen,sowie ungewöhnlicher H-Austausch zwischen η2-koordinierten Phenanthren- bzw. Acenaphthylen- und η5-Cyclopentadienyl-Liganden

Photochemical Reactions of Cyclopentadienylbis(ethene)rhodium with Phenanthrene, Acenaphthylene, and Triphenylene, and Unusual H Exchange between η²-Coordinated Phenanthrene or Acenaphthylene and η⁵-Cyclopentadienyl Ligands During UV irradiation of [CpRh(C₂H₄)₂] (Cp = η⁵-C₅H₅) in hexane/ether in the presence of phenanthrene one ethene ligand is displaced by coordination of the 9,10 double bond of phenanthrene, and (η⁵-cyclopentadienyl) (η²-ethene)(η²-9,10-phenanthrene)rhodium ( 1 ) is formed. The analogous reaction in hexane in the presence of acenaphthylene occurs with formation of the complexes (η²-1,2-acenaphthylene)(η⁵-cyclopentadienyl)(²-ethene)rhodium 2 and bis(η²-1,2-acenaphthylene)(η⁵-cyclopentadienyl)rhodium 3 in which one and two ethene molecules of [CpRh(C₂H₄)₂], respectively, are substituted by η²-1,2-acenaphthylene. The irradiation of [CpRh(C₂H₄)₂] with triphenylene in hexane yields the compounds [CpRh(η⁴-1,2,3,4-triphenylene)] ( 4 ), [(CpRh)₂(μ-η³: η³-triphenylene)] ( 5 ), and [(CpRh)₃(μ₃-η²: η²: η²-triphenylene)] ( 6 ). Despite the partially very low yields the new complexes could be unequivocally characterized spectroscopically and in the case of 1 and 3 by X-ray structural analysis. The compounds 1 and 2 in solution reveal a novel dynamic behaviour; via an intramolecular C? H activation, exchange occurs between the protons of the η²-coordinated arene and the Cp ligand. The complex 4 in solution is fluxional, too.     

Mo4(η3‐allyl)4Cl2(OH)2(CO)8: the first cubane‐type Mo2+ organometallic complex with μ3‐OH and μ3‐Cl bridges

The reaction between fluorenyllithium and Mo(η³‐C₃H₅)Cl(NCMe)₂(CO)₂ led to the isolation of di‐μ₃‐chlorido‐di‐μ₃‐hydroxido‐tetrakis[(η³‐allyl)dicarbonylmolybdenum(II)]–9‐fluorenone–tetrahydrofuran (1/1/1), [Mo₄(C₃H₅)₄Cl₂(OH)₂(CO)₈]·C₄H₈O·C₁₃H₈O. The tetrametallic Mo₄ unit constitutes the first example of a complex containing simultaneously two μ₃‐OH groups and two μ₃‐Cl anions capping the metallic trigonal prism. The four crystallographically independent Mo²⁺ centres exhibit distorted octahedral geometry with the η³‐allyl groups being trans‐coordinated to a μ₃‐OH group and the carbonyl groups occupying the equatorial plane. Space‐filling tetrahydrofuran and 9‐fluorenone molecules are engaged in strong O—H...O hydrogen‐bonding interactions with Mo₄(η³‐allyl)₄Cl₂(OH)₂(CO)₈ complexes.     

Mechanochemical Formation,Solution Rearrangements,and Catalytic Behavior of a Polymorphic Ca/K Allyl Complex

Without solvents present, the often far-from-equilibrium environment in a mechanochemically driven synthesis can generate high-energy, non-stoichiometric products not observed from the same ratio of reagents used in solution. Ball milling 2 equiv. K[A’] (A’=[1,3-(SiMe₃)₂C₃H₃]⁻) with CaI₂ yields a non-stoichiometric calciate, K[CaA’₃], which initially forms a structure ( 1 ) likely containing a mixture of pi- and sigma-bound allyl ligands. Dissolved in arenes, the compound rearranges over the course of several days to a structure ( 2 ) with only η³-bound allyl ligands, and that can be crystallized as a coordination polymer. If dissolved in alkanes, however, the rearrangement of 1 to 2 occurs within minutes. The structures of 1 and 2 have been modeled with DFT calculations, and 2 initiates the anionic polymerization of methyl methacrylate and isoprene; for the latter, under the mildest conditions yet reported for a heavy Group 2 species (one-atm pressure and room temperature).     

Synthesis,Reactivity and Crystal Structures of the Palladium(II) Complexes with the Pyrimidine Containing Ligand: Crystal Structures of [Pd(PPh3)(η1‐C4H3N2)(η2‐S2CNC4H8)] and [Pd(PPh3)(η1‐C4H3N2)(η2‐Tp)]

Treatment of Pd(PPh₃)₄ with 5‐bromo‐pyrimidine [C₄H₃N₂Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃)₂(η¹‐C₄H₃N₂)(Br)], 1 , by substituting two triphenylphosphine ligands. In acetonitrile solution of 1 in refluxing temperature for 1 day, it do not undergo displacement of the triphenylphosphine ligand to form the dipalladium complex [Pd(PPh₃)Br]₂{μ,η²‐(η¹‐C₄H₃N₂)}₂, or bromide ligand to form chelating pyrimidine complex [Pd(PPh₃)₂(η²‐C₄H₃N₂)]Br. Complex 1 reacted with bidentate ligand, NH₄S₂CNC₄H₈, and tridentate ligand, KTp {Tp = tris(pyrazoyl‐1‐yl)borate}, to obtain the η²‐dithiocarbamate η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐S₂CNC₄H₈)], 4 and η²‐Tp η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐Tp)], 5 , respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

Syntheses,and Crystal Structures of Indium Complexes with η2‐Piperidinyldithiocarbamate and η2‐Pyridine‐2‐Thionate Containing Ligands: Structures of [In(η2‐S2CNC5H10)3] and [In(η2‐pyS)3]

The η²‐thio‐indium complexes [In(η²‐thio)₃] (thio = S₂CNC₅H₁₀, 2 ; SNC₄H₄, (pyridine‐2‐thionate, pyS, 3 ) and [In(η²‐pyS)₂(η²‐acac)], 4 , (acac: acetylacetonate) are prepared by reacting the tris(η²‐acac)indium complex [In(η²‐acac)₃], 1 with HS₂CNC₅H₁₀, pySH, and pySH with ratios of 1:3, 1:3, and 1:2 in dichloromethane at room temperature, respectively. All of these complexes are identified by spectroscopic methods and complexes 2 and 3 are determined by single‐crystal X‐ray diffraction. Crystal data for 2 : space group, C2/c with a = 13.5489(8) Å, b = 12.1821(7) Å, c = 16.0893(10) Å, β = 101.654(1)°, V = 2600.9(3) ų, and Z = 4. The structure was refined to R = 0.033 and Rw = 0.086; Crystal data for 3 : space group, P2₁ with a = 8.8064 (6) Å, b = 11.7047 (8) Å, c = 9.4046 (7) Å, β = 114.78 (1)°, V = 880.13(11) ų, and Z = 2. The structure was refined to R = 0.030 and Rw = 0.061. The geometry around the metal atom of the two complexes is a trigonal prismatic coordination. The piperidinyldithiocarbamate and pyridine‐2‐thionate ligands, respectively, coordinate to the indium metal center through the two sulfur atoms and one sulfur and one nitrogen atoms, respectively. The short C‐N bond length in the range of 1.322(4)–1.381(6) Å in 2 and C‐S bond length in the range of 1.715(2)–1.753(6) Å in 2 and 3 , respectively, indicate considerable partial double bond character.     

The first three‐dimensional FeIII–SrII heterometallic coordination polymer: poly[[diaquatetrakis(μ3‐pyridine‐2,3‐dicarboxylato)diiron(III)strontium(II)] dihydrate]

The title compound, poly[[diaqua‐1κ²O‐tetrakis(μ₃‐pyridine‐2,3‐dicarboxylato)‐2:1:2′κ¹⁰N,O²:O^2′,O³:O^3′;2:1:2′κ⁸O³:O^3′:N,O²‐diiron(III)strontium(II)] dihydrate], {[Fe₂Sr(C₇H₃O₄)₄(H₂O)₂]·2H₂O}_n, which has triclinic (P) symmetry, was prepared by the reaction of pyridine‐2,3‐dicarboxylic acid, SrCl₂·6H₂O and Fe(OAc)₂(OH) (OAc is acetate) in the presence of imidazole in water at 363 K. In the crystal structure, the pyridine‐2,3‐dicarboxylate (pydc²⁻) ligand exhibits μ₃‐η¹,η¹:η¹:η¹ and μ₃‐η¹,η¹:η¹,η¹:η¹ coordination modes, bridging two Fe^III cations and one Sr^II cation. The Sr^II cation, which is located on an inversion centre, is eight‐coordinated by six O atoms of four pydc²⁻ ligands and two water molecules. The coordination geometry of the Sr^II cation can be best described as distorted dodecahedral. The Fe^III cation is six‐coordinated by O and N atoms of four pydc²⁻ ligands in a slightly distorted octahedral geometry. Each Fe^III cation bridges two neighbouring Fe^III cations to form a one‐dimensional [Fe₂(pydc)₄]_n chain. The chains are connected by Sr^II cations to form a three‐dimensional framework. The topology type of this framework is tfj . The structure displays O—H...O and C—H...O hydrogen bonding.     

Palladium‐MOP Chemistry: Pseudo‐cis‐Allyl MOP Complexes and Flexible Olefin Bonding. Preliminary Communication

We show that both palladium(0) and palladium(II) metal centers are capable of coordinating two monodentate MOP (=(R)‐2‐(diarylphosphino)‐1,1′‐binaphthalene) ligands in a pseudo‐cis orientation, despite published statements to the contrary. In addition to [Pd(η³‐C₃H₅)(MeO? MOP)₂]BF₄ (MeO? MOP=(R)‐2‐(diphenylphosphino)‐2′‐methoxy‐1,1′‐binaphthalene), the first examples of chiral bis κC¹‐prop‐2‐enyl (η¹‐CH₂CH?CH₂) complexes [cis‐Pd(κC¹‐C₃H₅)₂(MeO? MOP or MOP)₂], are shown to be relatively stable. Further, coordinated MOP and MeO? MOP both show stronger propensity towards novel intramolecular π‐olefin complexation than the CN? MOP analogue. The solid‐state structure of [Pd(fumaronitrile)(MOP)₂] is reported.     

Synthese,Struktur und Reaktivität von η3‐1,2‐Diphosphaallylkomplexen sowie von [{(η5‐C5H5)(CO)2W–Co(CO)3}{μ‐AsCH(SiMe3)2}(μ‐CO)]

Syntheses, Structure and Reactivity of η³‐1,2‐Diphosphaallyl Complexes and [{(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃}{μ‐AsCH(SiMe₃)₂}(μ‐CO)] Reaction of ClP=C(SiMe₂iPr)₂ ( 3 ) with Na[Mo(CO)₃(η⁵‐C₅H₅)] afforded the phosphavinylidene complex [(η⁵‐C₅H₅)(CO)₂Mo=P=C(SiMe₂iPr)₂] ( 4 ) which in situ was converted into the η¹‐1,2‐diphosphaallyl complex [η⁵‐(C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₂iPr)₂] ( 6 ) by treatment with the phosphaalkene tBuP=C(NMe₂)₂. The chloroarsanyl complexes [(η⁵‐C₅H₅)(CO)₃M–As(Cl)CH(SiMe₃)₂] [where M = Mo ( 9 ); M = W ( 10 )] resulted from the reaction of Na[M(CO)₃(η⁵‐C₅H₅)] (M = Mo, W) with Cl₂AsCH(SiMe₃)₂. The tungsten derivative 10 and Na[Co(CO)₄] underwent reaction to give the dinuclear μ‐arsinidene complex [(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃{μ‐AsCH(SiMe₃)₂}(μ‐CO)] ( 11 ). Treatment of [(η⁵‐C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₃)₂}] ( 1 ) with an equimolar amount of ethereal HBF₄ gave rise to a 85/15 mixture of the saline complexes [(η⁵‐C₅H₅)(CO)₂Mo{η²‐tBu(H)P–P(F)CH(SiMe₃)₂}]BF₄ ( 18 ) and [Cp(CO)₂Mo{F₂PCH(SiMe₃)₂}(tBuPH₂)]BF₄ ( 19 ) by HF‐addition to the PC bond of the η³‐diphosphaallyl ligand and subsequent protonation ( 18 ) and/or scission of the PP bond by the acid ( 19 ). Consistently 19 was the sole product when 1 was allowed to react with an excess of ethereal HBF₄. The products 6 , 9 , 10 , 11 , 18 and 19 were characterized by means of spectroscopy (IR, ¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR, MS). Moreover, the molecular structures of 6 , 11 and 18 were determined by X‐ray diffraction analysis.     

Komplexkatalyse. XXXII. Synthese und Charakterisierung von η3-Allyl-, η3-Crotyl-und η1,η2-Cyclooct-4(Z)-en-1-yl-nickel(II)-bis(brenzcate-chinato)-borat und ihre Eignung als Katalysatoren für die stereospezifische Butadienpolymerisation

Complex Catalysis. XXXII. Synthesis and Characterization of η³-Allyl-, η³-Crotyl-, and η¹,η²-Cyclooct-4(Z)-en-1-yl-nickel(II)-bis(brenzcatechinato)borate and their Suitability as Catalysts for the Stereospecific Butadiene Polymerization By reaction of [(η³-C₃H₅)₂Ni], [(η³-C₄H₇)₂Ni], and [Ni(cycloocta-1,5-diene)₂] with one equivalent bis(brenzcatechinato)boric acid HB(O₂C₆H₄)₂ in ether the complexes given in the title could be synthesized in good yields. The allyl complex [η³-C₃H₅NiB(O₂C₆H₄)₂] reacts with cycloocta-1,5-diene (COD) to give a cationic complex [η³-C₃H₅Ni(COD)]B(O₂C₆H₄)₂ and catalyses the 1,4-trans-polymerization of butadiene with an activity of ca. 150 ml C₄H₆/mol Ni · h and a selectivity of 78% under standard conditions at room temperature.