SAPO-34分子筛晶化过程中硅进入骨架的方式和机理

采用 Ｘ Ｒ Ｄ, Ｓ Ｅ Ｍ, Ｉ Ｒ 和 Ｎ Ｍ Ｒ 等手段考察了 Ｓ Ａ Ｐ Ｏ３４ 分子 筛的晶化过 程,深入研 究了晶化过程中硅进入 Ｓ Ａ Ｐ Ｏ３４ 晶格 骨架的方式和机理． 结果表明 ,在 Ｓ Ａ Ｐ Ｏ３４ 分子筛的整个晶化过程中没有 Ａｌ Ｐ Ｏ３４ 分 子筛晶相生成． 在 初始 凝 胶的 制备 过 程中, 模板 剂 的添 加和 混 合凝 胶的 老 化处 理对 Ｓ Ａ Ｐ Ｏ３４ 晶化过程的进行起着关键性的作用． 晶化前 期（ ＜ ２５ ｈ） , 硅原子直接参与晶核的形成和晶粒的长大过程,形成 Ｓｉ（４ Ａｌ） 结构,此阶段基本上 可以排除硅取代磷机理的作用; 晶化后期（ ＞ ２５ ｈ） ,少量硅以取代方式进入分子 筛骨架形成 Ｓｉ（ ｎ Ａｌ）（ ｎ ＝ ０ ～４） 多种硅结构     

SAPO—34分子筛晶化机理的研究

采用ＸＲＤ，ＳＥＭ，ＩＲ和ＣＰ／ＭＡＳ及ＭＡＳ ＮＭＲ等手段，对快速水热合成ＳＡＰＯ－３４分子筛的全过程进行了监测，研究了由原始凝胶到ＳＡＰＯ－３４结晶体过程中固相物质的组成结构随晶化时间的变化规律。结果表明，ＳＡＰＯ－３４晶核的形成过程既是一个硅氧，磷氧和铝氧四面体由无序排列的胶团到有序排列的晶格骨架的重排过程，同时又是羟基缔合脱水环化的过程。     

硅源及晶化时间对SAPO-5分子筛结构及性质的影响

分别以硅凝胶和正硅酸乙酯为硅源，通过改变晶化时间合成了系列ＳＡＰＯ５分子筛．用ＸＲＤ，ＭＡＳＮＭＲ和ＳＥＭ对分子筛的结构和形貌进行了表征．结果表明，以硅凝胶为硅源时，凝胶中的铝有３种面体配位状态．加热晶化很容易使凝胶转化为ＳＡＰＯ５分子筛，合成物的晶形更加规则．在４８ｈ内，延长晶化时间有助于硅进入分子筛骨架，使残余的Ａｌ２Ｏ３·Ｈ２Ｏ进一步反应，使骨架硅和铝的面体配位环境更加对称；超过４８ｈ后，硅开始游离出分子筛骨架，并使部分ＳＡＰＯ５转化为ＳＡＰＯ３４．以正硅酸乙酯为硅源时，硅和铝的反应活性均较低，凝胶中ＡｌＰＯ４及Ａｌ２Ｏ３·Ｈ２Ｏ的量均比四面体配位铝的量大．只有当晶化时间超过４８ｈ时，反应物中Ａｌ２Ｏ３·Ｈ２Ｏ才能完全转化．在此反应体系中，延长晶化时间有助于ＳＡＰＯ５的生成，使分子筛骨架硅的取代量更大，晶形更加规则，骨架铝的对称性更好．     

热及水热处理对SAPO-5分子筛结构的影响

对合成的ＳＡＰＯ５分子筛进行了高温和水热处理，并用ＩＲ，ＸＲＤ和ＭＡＳＮＭＲ对处理过的分子筛进行了表征．结果表明，短时间的高温焙烧并不破坏分子筛的结构，而使分子筛中的骨架元素Ｐ，Ａｌ和Ｓｉ发生重构；长时间的高温焙烧使分子筛的结晶度降低，主要是由于Ｐ和Ａｌ游离出分子筛的骨架而形成磷酸铝盐．水热处理使分子筛中的Ｓｉ经历一个转晶和重构过程，在使ＳＡＰＯ５分子筛结构更加完整的同时，未完全结晶的杂质形成了少量的鳞英石颗粒．     

SAPO－34分子筛表面酸性质的研究

以水热合成法制备了三个具有不同硅磷铝组成的硅磷酸铝分子筛ＳＡＰＯ－３４样品，采用红外光谱（ＩＲ）和氨法程序升温脱附（ＴＰＤ）两种方法考察了它们的表面酸性质。红外谱图中的３６００ｃｍ－１和３６２１ｃｍ－１谱峰归属于处于ＳＡＰＯ－３４分子筛结构中不同位置的两种桥联羟基（Ｓｉ－ＯＨ－Ａｌ）的振动。ＮＨ３－ＩＲ测定结果显示，这两种羟基具有较强的Ｂ酸特性，并且是分子筛酸性的主要来源；而分子筛具有的Ｌ酸中心的酸性较弱。比较三个样品的ＮＨ３－ＴＰＤ、ＮＨ_３－ＩＲ和骨架组成后发现，ＳＡＰＯ－３４的酸性受其骨架硅含量的强烈影响：当Ｓｉ／Ａｌ摩尔比小于１时，酸性随硅含量增高而变弱；当Ｓｉ／Ａｌ摩尔比大于１时，酸性将随硅含量增高而变强。     

TS-1分子筛骨架钛原子引入过程的研究

采用廉价的四丙基溴化铵（ＴＰＡＢｒ）为模板剂合成了ＴＳ１分子筛．在晶化过程中,运用ＸＲＤ,ＩＣＰ,ＩＲ,２９ＳｉＭＡＳＮＭＲ和ＵＶＶｉｓ光谱等表征手段,系统地研究了钛原子引入分子筛骨架的机制,观察到钛原子随分子筛的形成同步进入骨架的规律．另外,尽管在晶化初期固相中没有ＴｉＯ２结晶出现,但存在分散态的ＴｉＯｘ物种．随晶化时间的延长,液相中钛物种之间聚合的几率增加,使固相中ＴｉＯ２晶体不断形成．     

硅源及晶化时间对SAPO-5分子筛模板剂、酸性及催化性能的影响

改变硅源和晶化时间合成了系列ＳＡＰＯ５分子筛．用原位红外光谱和ＮＨ３ＴＰＤ研究了不同样品的酸碱性，用ＴＧＤＴＡ和ＭＡＳＮＭＲ考察了硅源及晶化时间对分子筛模板剂的影响，评价了不同样品对正己烷裂解的催化活性．结果表明，ＳＡＰＯ５分子筛孔道不仅与模板剂的胺基有作用，而且与其甲基也有作用．以硅凝胶为硅源时，在４８ｈ内，延长晶化时间可使分子筛中硅含量和强酸中心数目增加，低温下正己烷裂解活性提高；晶化７２ｈ时，分子筛的酸性减弱，正己烷裂解活性降低．以正硅酸乙酯为硅源时，延长晶化时间可使ＳＡＰＯ５的酸性增强，正己烷裂解性能提高．     

EFFECT OF CRYSTALLIZATION TEMPERATURE ON MCM-41 SYNTHESIS

在Ｎａ２ＯＳｉＯ２ＣＴＡＢＨ２Ｏ四元水热体系中系统地考察了晶化温度对中孔ＭＣＭ４１分子筛合成及其骨架结构的影响。实验结果表明，提高晶化温度虽然能明显加快晶化速率，缩短晶化时间，但同时样品的结晶度和中孔骨架结构的有序度却被迅速破坏。这些特点与传统沸石的合成过程完全不同，其原因主要是合成ＭＣＭ４ｌ时所用的模板剂及其在合成中所起的模板作用与传统沸石完全不同。相对低的晶化温度（如１００℃）有利于高质量和高热稳定性的中孔ＭＣＭ４ｌ分子筛的合成。     

热及水热处理对SAPO—5分子筛结构的影响

对合成的ＳＡＰＯ－５分子筛进行了高温和水热处理，并用ＩＲ，ＸＲＤ和ＭＡＳ ＮＭＲ对处理过的分子筛进行了表征。结果表明，短时间的高温焙烧并不破坏分子筛的结构，而使分子筛中的骨架元素Ｐ，Ａｌ和Ｓｉ发生重构；长时间的高温焙烧使分子筛的结晶度降低，主要是由于Ｐ和Ａｌ游离出分子筛的骨架而形成磷酸铝盐。水热处理使分筛的Ｓｉ经历一个转晶和重构过程，在使ＳＡＰＯ－５分子筛结构更加完整的同时，未完全结晶的杂质形成了     

CoAPSO－34分子筛的合成与性能

以三乙胺为模板剂，在碱性条件下用水热晶化法将钴元素引入了硅磷铝分子筛骨架，合成出ＣｏＡＰＳＯ－３４分子筛．实验表明，在碱性介质中以低价态引入的钴元素首先转化为高价态Ｃｏ（Ⅲ），然后才进入分子筛骨架。利用Ｘ射线粉末衍射和红外光谱对其进行了结构分析，确认钴元素进入了分子筛骨架．利用程序升温氨脱附和氨法红外光谱考察了ＣｏＡＰＳＯ－３４的表面酸性．将ＣｏＡＰＳＯ－３４用作甲醇转化的催化剂时，随钴含量增高，催化剂稳定性下降，反应产物中Ｃ＝２～Ｃ＝４烯烃的选择性升高     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.