A comprehensive understanding of the anionic redox chemistry in layered oxide cathodes for sodium-ion batteries

Sodium-ion batteries(SIBs) have demonstrated great application prospects in large-scale energy storage systems and low-speed electric vehicles due to the cost effectiveness and abundant resources. Layered transition-metal oxides are recognized as one of the most attractive sodium-ion storage cathode candidates by virtue of their high compositional diversity, environmental friendliness, ease of synthesis, and promising theoretical capacities. The practicability, however, is still limited by the fact that the energy densities of most Na-storage layered oxide cathodes solely using the conventional cationic redox are not comparable to those of the lithium-ion storage counterparts. Recently, the strategy of activating anionic redox(O_2~-/O~(n-)) which is popular in Li-rich layered materials has been successfully applied in oxide cathodes of SIBs to promote the energy density to a new level. It is interesting to note that excess Na is not the prerequisite to induce anionic redox in sodium oxides, indicating a new mechanism underlying Na-ion materials. Herein, the latest advances on the anionic redox chemistry in layered oxide cathodes for SIBs,including the fundamental theories, triggering strategies, and applicable cathode materials, are comprehensively reviewed.Moreover, the challenges(mainly O_2 release) facing anionic redox are discussed, and the possible remedies are outlined for future developments toward a highly reversible oxygen usage. We believe that this review can provide a valuable guidance for the exploration of high-energy layered oxide cathode materials of SIBs.     

聚阴离子型钠离子电池正极材料的研究进展

作为钠离子电池正极材料的体系之一,聚阴离子型化合物具有成本低廉和安全性高的优点,适合于大规模固定式储能系统。实时平衡电网电力供需水平对正极材料的倍率性能提出了更高的要求,而聚阴离子材料虽然存在离子扩散通道,但缺乏电子传输路径,导致其动力学性能不佳。为了挖掘影响聚阴离子型正极动力学性能的因素,本文以结构为基础,对影响聚阴离子正极离子扩散行为的本征原因作了阐述,再从表面修饰和形态设计入手,对目前研究较多的改善电极表面及界面处离子和电子扩散的策略作了总结与点评,然后从材料的分级结构回归到鲜见报导的元素掺杂和取代,从本质上提出优化动力学性能的方案,并展望了进一步提高正极材料倍率性能的方向。本文可为高倍率的聚阴离子型正极材料及其他材料的开发提供基本理论和实践依据。     

Nickel-Rich Layered Cathode Materials for Lithium-Ion Batteries

Nickel-rich layered transition metal oxides are considered as promising cathode candidates to construct next-generation lithium-ion batteries to satisfy the demands of electrical vehicles, because of the high energy density, low cost, and environment friendliness. However, some problems related to rate capability, structure stability, and safety still hamper their commercial application. In this Review, beginning with the relationships between the physicochemical properties and electrochemical performance, the underlying mechanisms of the capacity/voltage fade and the unstable structure of Ni-rich cathodes are deeply analyzed. Furthermore, the recent research progress of Ni-rich oxide cathode materials through element doping, surface modification, and structure tuning are summarized. Finally, this review concludes by discussing new insights to expand the field of Ni-rich oxides and promote practical applications.     

表面限域掺杂提升高比能正极材料稳定性

Lithium ion batteries (LIBs) have broad applications in a wide variety of a fields pertaining to energy storage devices. In line with the increasing demand in emerging areas such as long-range electric vehicles and smart grids, there is a continuous effort to achieve high energy by maximizing the reversible capacity of electrode materials, particularly cathode materials. However, in recent years, with the continuous enhancement of battery energy density, safety issues have increasingly attracted the attention of researchers, becoming a non-negligible factor in determining whether the electric vehicle industry has a foothold. The key issue in the development of battery systems with high specific energies is the intrinsic instability of the cathode, with the accompanying question of safety. The failure mechanism and stability of high-specific-capacity cathode materials for the next generation of LIBs, including nickel-rich cathodes, high-voltage spinel cathodes, and lithium-rich layered cathodes, have attracted extensive research attention. Systematic studies related to the intrinsic physical and chemical properties of different cathodes are crucial to elucidate the instability mechanisms of positive active materials. Factors that these studies must address include the stability under extended electrochemical cycles with respect to dissolution of metal ions in LiPF₆-based electrolytes due to HF corrosion of the electrode; cation mixing due to the similarity in radius between Li⁺ and Ni²⁺; oxygen evolution when the cathode is charged to a high voltage; the origin of cracks generated during repeated charge/discharge processes arising from the anisotropy of the cell parameters; and electrolyte decomposition when traces of water are present. Regulating the surface nanostructure and bulk crystal lattice of electrode materials is an effective way to meet the demand for cathode materials with high energy density and outstanding stability. Surface modification treatment of positive active materials can slow side reactions and the loss of active material, thereby extending the life of the cathode material and improving the safety of the battery. This review is targeted at the failure mechanisms related to the electrochemical cycle, and a synthetic strategy to ameliorate the properties of cathode surface locations, with the electrochemical performance optimized by accurate surface control. From the perspective of the main stability and safety issues of high-energy cathode materials during the electrochemical cycle, a detailed discussion is presented on the current understanding of the mechanism of performance failure. It is crucial to seek out favorable strategies in response to the failures. Considering the surface structure of the cathode in relation to the stability issue, a newly developed protocol, known as surface-localized doping, which can exist in different states to modify the surface properties of high-energy cathodes, is discussed as a means of ensuring significantly improved stability and safety. Finally, we envision the future challenges and possible research directions related to the stability control of next-generation high-energy cathode materials.     

Manganese Oxide(MnO) and Cadmium Dioxide(CdO_2) Attached to Carbon Nanotube(8, 0) as Anodes of Metal-ion Batteries: a DFT Study

Performance of carbon nanotube(CNT) and their attached metal oxides(manganese oxide(MnO) and cadmium dioxide(CdO2)) structures as anode electrodes in lithium-ion battery(LIB) and potassium-ion battery(KIB) are investigated. The Gibbs free energy of adsorption of Li and K atoms/ions on surfaces of CNT(8, 0), CNT(8, 0)-MnO and CNT(8, 0)-CdO2 are calculated. The cell voltages(Vcell) of Li and K atoms/ions adsorption on studied surfaces are examined. The Vcell of LIBs with metal-oxides attached to CNT(8, 0) as anode electrodes are higher than those KIBs. The adsorbed metal oxides(MnO and CdO2) on CNT(8, 0) increased the charges, electronic conductivity and Vcell of LIB and KIB, efficiently. The CNT(8, 0)-CdO2 as anode electrodes in LIB and KIB is proposed.     

Insights into Layered Oxide Cathodes for Rechargeable Batteries

Layered intercalation compounds are the dominant cathode materials for rechargeable Li-ion batteries. In this article we summarize in a pedagogical way our work in understanding how the structure’s topology, electronic structure, and chemistry interact to determine its electrochemical performance. We discuss how alkali–alkali interactions within the Li layer influence the voltage profile, the role of the transition metal electronic structure in dictating O3-structural stability, and the mechanism for alkali diffusion. We then briefly delve into emerging, next-generation Li-ion cathodes that move beyond layered intercalation hosts by discussing disordered rocksalt Li-excess structures, a class of materials which may be essential in circumventing impending resource limitations in our era of clean energy technology.     

Oxygen Vacancy Diffusion and Condensation in Lithium‐Ion Battery Cathode Materials

Oxygen vacancies (OV) are native defects in transition metal (TM) oxides and their presence has a critical effect on the physicochemical properties of the oxide. Metal oxides are commonly used in lithium‐ion battery (LIB) cathodes and there is still a lack of understanding of the role of OVs in LIB research field. Here, we report on the behavior of OVs in a single‐crystal LIB cathode during the non‐equilibrium states of charge and discharge. We found that microcrack evolution in a single crystal occurs due to OV condensation in specific crystallographic orientations generated by the continuous migration of OVs and TM ions. Moreover, understanding the effects of the presence and diffusion of OVs in metal oxides enables the elucidation of most of the conventional mechanisms of capacity fading in LIBs and provides new insights for new electrochemical applications.     

关于水系锌离子电池中无氧钒基正极材料的综述

水系锌离子电池具有功率密度高、环境友好、安全性高、低成本和锌资源丰富等优点，被认为具有潜力成为下一代电化学储能系统。然而，正极材料较差的电化学性能制约了水系锌离子电池的未来发展。尽管氧化锰、氧化钒、普鲁士蓝类似物、有机材料等多种材料已被广泛研究，设计具有高性能的理想正极材料仍面临着巨大挑战。无氧钒基化合物由于具有高的电导率、大的层间距、低的离子扩散势垒和高的理论比容量，受到越来越多的关注。本文总结了无氧钒基化合物的研究进展，包括电极材料的设计、改善其电化学性能的有效途径以及复杂的储能机制，提出了无氧钒基化合物目前面临的挑战和未来的发展前景，为进一步制备新型高性能钒基正极材料提供指导。     

Emerging Lithiated Organic Cathode Materials for Lithium-Ion Full Batteries

Organic electrode materials have application potential in lithium batteries owing to their high capacity, abundant resources, and structural designability. However, most reported organic cathodes are at oxidized states (namely unlithiated compounds) and thus need to couple with Li-rich anodes. In contrast, lithiated organic cathode materials could act as a Li reservoir and match with Li-free anodes such as graphite, showing great promise for practical full-battery applications. Here we summarize the synthesis, stability, and battery applications of lithiated organic cathode materials, including synthetic methods, stability against O₂ and H₂O in air, and strategies to improve comprehensive electrochemical performance. Future research should be focused on new redox chemistries and the construction of full batteries with lithiated organic cathodes and commercial anodes under practical conditions. This Minireview will encourage more efforts on lithiated organic cathode materials and finally promote their commercialization.     

Progress on multiphase layered transition metal oxide cathodes of sodium ion batteries

As one of the most promising secondary batteries in large-scale energy storage, sodium ion batteries (SIBs) have attracted wide attention due to the abundant raw materials and low cost. Layered transition metal oxides are one kind of popular cathode material candidates because of its easy synthesis and large theoretical specific capacity. Yet, the most common P2 and O3 phases show distinct structural characteristics respectively. O3 phase can serve as a sodium reservoir, but it usually suffers from serious phase transition and sluggish kinetics. For the P2 phase, it allows the fast sodium ion migration in the bulk and the structure can maintain stable, but it is lack of sodium, showing a great negative effect on Coulombic efficiency in full cell. Thus, single phase structure almost cannot achieve satisfied comprehensive sodium storage performances. Under these circumstances, exploiting novel multiphase cathodes showing synergetic effect may give solution to these problems. In this review, we summarize the recent development of multiphase layered transition metal oxide cathodes of SIBs, analyze the mechanism and prospect the future potential research directions.     

Lithium versus Mono/Polyvalent Ion Intercalation: Hybrid Metal Ion Systems for Energy Storage

The energy storage by redox intercalation reactions is, nowadays, the most effective rechargeable ion battery. When lithium is used as intercalating agents, the high energy density is achieved at an expense of non‐sustainability. The replacement of Li⁺ with cheaper monovalent ions enables to make greener battery alternatives. The utilization of polyvalent ions instead of Li⁺ permits to multiplying the battery capacity. Contrary to Li⁺, the realization of quick and reversible intercalation of bigger monovalent and of polyvalent ions is a scientific challenge due to kinetic constraints, polarizing ion effects and Coulomb interactions. Herein we provide a vision how to make the intercalation of these ions feasible. The idea is to perform dual intercalation of ions having different charges, radii, preferred coordination and diffusion pathway topology. All these features are demonstrated by the recent knowledge on selective and non‐selective intercalation properties of oxides and polyanion compounds with layered and tunnel structures. Based on dual intercalation properties, the fabrication of hybrid metal ion batteries is presented and discussed.     

Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries

High energy‐density lithium‐ion batteries are in demand for portable electronic devices and electrical vehicles. Since the energy density of the batteries relies heavily on the cathode material used, major research efforts have been made to develop alternative cathode materials with a higher degree of lithium utilization and specific energy density. In particular, layered, Ni‐rich, lithium transition‐metal oxides can deliver higher capacity at lower cost than the conventional LiCoO₂. However, for these Ni‐rich compounds there are still several problems associated with their cycle life, thermal stability, and safety. Herein the performance enhancement of Ni‐rich cathode materials through structure tuning or interface engineering is summarized. The underlying mechanisms and remaining challenges will also be discussed.     

Review and prospect of layered lithium nickel manganese oxide as cathode materials for Li-ion batteries

Layered structural lithium metal oxides with rhombohedral α-NaFeO₂ crystal structure have been proven to be particularly suitable for application as cathode materials in lithium-ion batteries. Compared with LiCoO₂, lithium nickel manganese oxides are promising, inexpensive, nontoxic, and have high thermal stability; thus, they are extensively studied as alternative cathode electrode materials to the commercial LiCoO₂ electrode. However, a lot of work needs to be done to reduce cost and extend the effective lifetime. In this paper, the development of the layered lithium nickel manganese oxide cathode materials is reviewed from synthesis method, coating, doping to modification, lithium-rich materials, nanostructured materials, and so on, which can make electrochemical performance better. The prospects of lithium nickel manganese oxides as cathode materials for lithium-ion batteries are also looked forward to.     

Advances in the Cathode Materials for Lithium Rechargeable Batteries

The accelerating development of technologies requires a significant energy consumption, and consequently the demand for advanced energy storage devices is increasing at a high rate. In the last two decades, lithium‐ion batteries have been the most robust technology, supplying high energy and power density. Improving cathode materials is one of the ways to satisfy the need for even better batteries. Therefore developing new types of positive electrode materials by increasing cell voltage and capacity with stability is the best way towards the next‐generation Li rechargeable batteries. To achieve this goal, understanding the principles of the materials and recognizing the problems confronting the state‐of‐the‐art cathode materials are essential prerequisites. This Review presents various high‐energy cathode materials which can be used to build next‐generation lithium‐ion batteries. It includes nickel and lithium‐rich layered oxide materials, high voltage spinel oxides, polyanion, cation disordered rock‐salt oxides and conversion materials. Particular emphasis is given to the general reaction and degradation mechanisms during the operation as well as the main challenges and strategies to overcome the drawbacks of these materials.     

Recent Advances in Surface Coatings of Layered Cathode Materials for High-Performance Sodium-Ion Batteries

Layered transition metal oxides (layered materials) have the advantages of simple synthesis methods, high average operating voltages, and good specific capacity, and are therefore promising cathode materials for sodium-ion batteries (SIBs). However, the capacity retention of these materials is poor due to the dissolution of transition metals caused by the detrimental reactions of the electrode with the electrolyte and the rupture of the electrode due to volume expansion during cycling. Studies have discovered that surface modification can effectively improve the aforementioned problems. This paper reviews the effects of different coating materials (e. g., carbon coatings, metal oxide coatings, phosphate coatings, etc.) on the performances of layered cathode materials and analyzes the reasons for the improved performance. In addition, the limitations of different coating materials and coating methods are presented, and future developments are proposed.     

Transformation of Rusty Stainless-Steel Meshes into Stable,Low-Cost,and Binder-Free Cathodes for High-Performance Potassium-Ion Batteries

To recycle rusty stainless-steel meshes (RSSM) and meet the urgent requirement of developing high-performance cathodes for potassium-ion batteries (KIB), we demonstrate a new strategy to fabricate flexible binder-free KIB electrodes via transformation of the corrosion layer of RSSM into compact stack-layers of Prussian blue (PB) nanocubes (PB@SSM). When further coated with reduced graphite oxide (RGO) to enhance electric conductivity and structural stability, the low-cost, stable, and binder-free RGO@PB@SSM cathode exhibits excellent electrochemical performances for KIB, including high capacity (96.8 mAh g⁻¹), high discharge voltage (3.3 V), high rate capability (1000 mA g⁻¹; 42 % capacity retention), and outstanding cycle stability (305 cycles; 75.1 % capacity retention).     

Proton Intercalation/De‐Intercalation Dynamics in Vanadium Oxides for Aqueous Aluminum Electrochemical Cells

Understanding cation (H⁺, Li⁺, Na⁺, Al³⁺, etc.) intercalation/de‐intercalation chemistry in transition metal compounds is crucial for the design of cathode materials in aqueous electrochemical cells. Here we report that orthorhombic vanadium oxides (V₂O₅) supports highly reversible proton intercalation/de‐intercalation reactions in aqueous media, enabling aluminum electrochemical cells with extended cycle life. Empirical analyses using vibrational and x‐ray spectroscopy are complemented with theoretical analysis of the electrostatic potential to establish how and why protons intercalate in V₂O₅ in aqueous media. We show further that cathode coatings composed of cation selective membranes provide a straightforward method for enhancing cathode reversibility by preventing anion cross‐over in aqueous electrolytes. Our work sheds light on the design of cation transport requirements for high‐energy reversible cathodes in aqueous electrochemical cells.     

Proton Intercalation/De-Intercalation Dynamics in Vanadium Oxides for Aqueous Aluminum Electrochemical Cells

Understanding cation (H⁺, Li⁺, Na⁺, Al³⁺, etc.) intercalation/de-intercalation chemistry in transition metal compounds is crucial for the design of cathode materials in aqueous electrochemical cells. Here we report that orthorhombic vanadium oxides (V₂O₅) supports highly reversible proton intercalation/de-intercalation reactions in aqueous media, enabling aluminum electrochemical cells with extended cycle life. Empirical analyses using vibrational and x-ray spectroscopy are complemented with theoretical analysis of the electrostatic potential to establish how and why protons intercalate in V₂O₅ in aqueous media. We show further that cathode coatings composed of cation selective membranes provide a straightforward method for enhancing cathode reversibility by preventing anion cross-over in aqueous electrolytes. Our work sheds light on the design of cation transport requirements for high-energy reversible cathodes in aqueous electrochemical cells.     

钠离子电池磷酸盐正极材料研究进展

近年来,钠离子电池因其原材料丰富、资源成本低廉及安全环保等突出优点,在电化学规模储能领域和低速电动车中具有广阔的应用前景。聚阴离子型磷酸盐具有稳定的框架结构、合适的工作电压和快速的离子扩散路径等特征,是一类极具研究价值和应用前景的钠离子电池正极材料。但是,磷酸盐正极材料电子导电性差和比能量偏低等缺陷限制了其走向实际应用。研究工作者通过体相结构调控和微纳结构设计等手段进行改性研究,旨在提升磷酸盐正极材料的性能表现、推动钠离子储能体系的研究开发。本文综述了钠离子电池磷酸盐正极材料的最新进展,包括正磷酸盐、焦磷酸盐、氟磷酸盐和混合磷酸盐化合物,通过对磷酸盐材料的晶体结构、储钠机理和改性策略等方面的综述,揭示材料成分、结构与电化学性能之间的本征关系,为聚阴离子磷酸盐正极材料的持续改性和新型磷酸盐高压正极材料的探索开发提供指导。     

Transformation of Rusty Stainless‐Steel Meshes into Stable,Low‐Cost,and Binder‐Free Cathodes for High‐Performance Potassium‐Ion Batteries

To recycle rusty stainless‐steel meshes (RSSM) and meet the urgent requirement of developing high‐performance cathodes for potassium‐ion batteries (KIB), we demonstrate a new strategy to fabricate flexible binder‐free KIB electrodes via transformation of the corrosion layer of RSSM into compact stack‐layers of Prussian blue (PB) nanocubes (PB@SSM). When further coated with reduced graphite oxide (RGO) to enhance electric conductivity and structural stability, the low‐cost, stable, and binder‐free RGO@PB@SSM cathode exhibits excellent electrochemical performances for KIB, including high capacity (96.8 mAh g⁻¹), high discharge voltage (3.3 V), high rate capability (1000 mA g⁻¹; 42 % capacity retention), and outstanding cycle stability (305 cycles; 75.1 % capacity retention).