柴油脱硫的机理研究以及反应中的溶剂效应

柴油的脱硫技术分为加氢脱硫和非加氢脱硫。在非加氢脱硫的研究中,氧化脱硫技术具有反应条件温和、不使用昂贵的氢气、投资和操作费用低等优点日益受到重视。文章介绍了柴油的脱硫技术的机理方面的研究进展。其中包括加氢脱硫的反应网络;以及氧化脱硫研究中,光化学氧化体系和有机过氧化物氧化体系中DBT的氧化机理。在不同的反应体系中,溶剂对含硫化合物的脱除也有很大的影响.     

柴油非加氢脱硫技术研究中样品的选择

利用气相色谱/原子发射光谱检测器（GC/AED），对小型加氢装置的加氢脱硫柴油样品及氧化/萃取前后样品油中含硫化合物进行了分析，对色谱图中出现的几个可疑峰进行了分析和推测，表明这几个峰是由元素硫产生的，并通过无硫油样中加入硫磺和对样品进行汞洗等实验进行了验证。此外，对于加氢柴油中元素硫产生原因以及对硫质量分数测定和对实验分析的影响，在氧化脱硫等非加氢脱硫实验中样品的选择等问题进行了讨论。     

高硫煤加氢热解脱硫的研究Ⅱ.反应条件对煤加氢热解脱硫的影响

本文采用红庙褐煤在加压固定床上，详细考察了不同反应条件对加氢热解脱硫的影响。研究结果表明：氢气流速的增加可以显著降低焦中的硫含量，增加脱硫率和硫在气相中的分布。氢气压力增加有利于增加煤中含硫化合物的加氢脱硫反应，提高脱硫率。加氢热解过程中的传质作用对脱硫率和硫分布也有重要影响。在一定的热解温度下，适当增加停留时间有利于氢气与含硫化合物的扩散接触，提高脱硫率。同时红庙煤加氢热解产生的焦油中的硫分布随各种反应条件的变化不大。     

高硫煤加氢热解脱硫的研究：Ⅱ.反应条件对煤加氢热解脱硫的影响

本文采用红庙褐煤在加压固定床上，详细考察了不同反应条件对加氢热解脱硫的影响。研究结果表明：氢气流速的增加可以显著降低焦中的硫含量，增加脱硫率和硫在气相中的分布。氢气压力增加有利于增加煤中含硫化合物的加氢脱硫反应，提高脱硫率。加氢热解过程中的传     

高硫煤加氢热解脱硫的研究Ⅰ.热解与加氢热解脱硫的对比

以兖州烟煤和红庙褐煤为考察对象，在加压固定床上压力为３ＭＰａ，温度从３５０～６５０℃范围内，研究了加氢热解以及氮气下热解过程中硫在半焦、焦油中的含量以及脱硫率和硫分布的变迁规律。实验表明，加氢热解比氮气下热解有着更好的脱硫作用，有利于降低半焦中的硫含量。这种脱硫作用随煤种的不同而不同，尤其受到煤中矿物质的显著影响。因此红庙煤加氢热解焦油中硫含量显著降低，半焦的硫含量随温度的升高，先逐渐降低然后增加；而兖州煤一直呈下降趋势。ＸＲＤ分析表明，红庙煤在加氢热解条件下，碱性矿物质与Ｈ２Ｓ反应而产生的硫化物主要是ＦｅＳ和ＣａＳ。从兖州煤的脱硫率曲线可以得出，加氢热解不仅有利于易分解脂肪类含硫化合物的脱除，而且可以促使难分解噻吩芳香类含硫化合物的脱除。     

液体燃料催化氧化脱硫

随着世界清洁燃料中含硫标准的不断提高，传统的加氢除硫方法面临的问题也更加严峻。在近年发展起来的非传统除硫新技术中，催化氧化脱硫技术的研究进展较快。本文介绍了催化氧化脱硫法这一新技术的理论基础及其基本原则，重点概述了近年来在液体燃料催化氧化法脱硫从而获得清洁燃料这一研究领域所取得的最新成果，并对该领域研究的发展方向进行了展望。     

轻质油品非加氢脱硫技术

日益严格的环保法规,对生产低硫、超低硫清洁油品技术提出了更高的要求。传统的加氢脱硫技术存在投资大、运行成本高等问题，因此开发成本低、操作条件温和的非加氢脱硫技术成为一种趋势。本文综述了目前轻质油品非加氢脱硫的相关技术,主要包括氧化脱硫、吸附脱硫和生物脱硫等技术的研究进展；简要介绍了萃取脱硫、络合脱硫、催化裂化脱硫、烷基化脱硫、膜分离脱硫及离子液体脱硫等技术;同时对轻质油品非加氢脱硫技术的应用前景进行了展望。     

功能化酸性离子液体催化柴油氧化脱硫的研究

以功能化酸性离子液体为催化剂,30%双氧水为氧化剂,将加氢柴油中的含硫化合物氧化为相应的砜类物质,并用N-甲基吡咯烷酮（NMP）萃取一次。同时考察了反应温度、反应时间和催化剂用量等因素对氧化脱硫反应的影响,得出最佳反应条件为,3mL油样（硫的质量分数为200×10-6）、1.5g酸性离子液体、 0.3mL H2O2、 25℃,3.5h、VNMP/Vdiesel=1∶1,脱硫率可达到86.7%,柴油硫的质量分数仅为25×10-6左右,反应结束后,可通过简单的倾倒将油样和催化剂分离,重复使用5次,其催化活性变化不大。     

催化裂化汽油中含硫化合物的分离氧化脱硫研究

以负载氧化铜的氧化铝层析柱对催化裂化(FCC)汽油全馏分进行分离,使其中的烷烃、烯烃与芳烃、含硫化合物分离成极性不同的两组,含硫化合物在芳烃组分中得以分离富集。分离后对芳烃组分中的含硫化合物进行氧化,脱硫率达72%。氧化后的芳烃组分与分离出来的烷烃、烯烃组分混兑,可使FCC汽油的总脱硫率达71·3%。     

柴油馏分加氢脱硫动力学及反应器研究进展

当前各国环保法规对柴油中硫的质量分数的限制越来越严格。催化加氢脱硫是实现柴油低硫化的重要途径，动力学和新反应器的研究受到了研究者的广泛关注。本文介绍了柴油馏分中两种典型的难脱除含硫化合物二苯并噻吩和4,6-二甲基二苯并噻吩在各类催化剂上加氢脱硫的反应路径，比较了这两种模型含硫化合物的直接脱硫（DDS）和先加氢再脱硫（HYD）路径相对快慢的影响因素。详细综述了假1级、假2级、快慢1级、n级、L-H以及抑制剂H2S存在下的动力学模型在描述二苯并噻吩类模型化合物及真实油品的加氢脱硫过程中的研究现状，介绍了神经网络在柴油加氢动力学和脱硫率预测方面的研究进展。还对催化精馏、并流-逆流滴流床、两相床反应器等新型加氢脱硫反应器的最新发展作了综述，展望了加氢脱硫动力学及反应器的研究方向和面临的挑战。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.