Destructive effect of solar light on morphology of colloidal silver nanocubes

Colloidal silver nanocubes (NCs) were successfully synthesized by reduction of silver nitrate with ethylene glycol and polyvinylpyrrolidon as capping agent. The effect of solar light irradiation on the formation and morphology of silver NCs was investigated. Moreover, altering the amount of sodium sulfide was used to control the morphology and shape of primary silver seeds. Scanning electron microscopy, transmitting electron microscopy, X-ray diffraction and UV-vis spectroscopy were used to characterize silver NCs. The samples prepared under the solar light irradiation do not possess cubic shape while highly monodispersed silver NCs were obtained in dark room conditions. For dark room synthesis, a decrease of the amount of Na₂S by only 10 μL resulted in formation of mixture of silver nanospheres and nanowires in addition to NCs instead of the monodispersed silver NCs. However, similar increase of the amount of sodium sulfide results in distortion of cubic geometry of particles. The results suggest that solar light has a negative effect on the shape evolution of the primary silver seeds.     

Study of polyol synthesis reaction parameters controlling high yield of silver nanocubes

The influence of the parameters and conditions of sodium sulfide-induced reaction of polyol synthesis of silver nanoparticles on the yield of cube-shaped particles and the optical properties of colloids is studied. The protocol proposed by Skrabalak et al. for the synthesis of nanocubes in small volumes (Nature Protocols, 2007, vol. 2, p. 2182) is taken as an initial variant for optimization. The effects of the reagent concentrations, degree of ethylene glycol oxygenation, the presence of impurities, reaction time, and temperature are studied. Suspensions containing nanoparticles with different shapes and sizes, including polydisperse particles of irregular shapes, silver nanocubes with a yield of 0 to 97%, nanoprisms, and nanorods, can be produced by varying the synthesis parameters. The key parameters controlling the yield of nanocubes are the degree of ethylene glycol oxygenation and the presence of trace amounts of ions of other metals (not silver). It is established that variations in the reaction time make it possible to vary the sizes of nanocubes in the range of 30–60 nm. Suspensions with high contents of cube-shaped particles are shown to exhibit three maxima in the plasmon extinction resonance spectrum at wavelengths of 350, 390, and, depending on the particle size, 435–470 nm.     

Preparation, self-assembly, and mechanistic study of highly monodispersed nanocubes

In this paper, we describe the synthesis and growth mechanism of highly monodispersed platinum nanocubes. The platinum nanocubes are synthesized by the decomposition of a platinum precursor in a hydrogen atmosphere. The morphology and size distribution of the platinum particles formed has been studied with HRTEM. By controlling the concentration of the platinum precursor, we demonstrate that at low concentration, it is possible to grow polydispersed nanocubes with {1,0,0} facets. Increasing the concentration of the precursor changes the growth mechanism, resulting in the formation of highly monodispersed platinum nanocubes. Highly monodispersed platinum nanocubes are formed in a two-step growth mechanism with initial growth of the {1,1,1} facets followed by secondary growth filling the {1,0,0} facets. The particle monodispersity facilitates the formation of long-range arrays of nanocubes.     

Controlled synthesis of monodisperse silver nanocubes in water

Monodisperse silver nanocubes with edge length of 55 +/- 5 nm were, for the first time, synthesized in water on the basis of HTAB-modified silver mirror reaction at 120 degrees C (HTAB, n-hexadecyltrimethylammonium bromide). The individual nanocube was crystallographically well defined with a single crystal bonded by six {200} facets. The nanocubes were soluble to form stable aqueous solutions and had a strong tendency to assemble into two-dimensional arrays with regular checked pattern on substrate.     

Facile Synthesis of Ag Nanocubes of 30 to 70 nm in Edge Length with CF3COOAg as a Precursor

This paper describes a new protocol to synthesize Ag nanocubes of 30 to 70 nm in edge length with the use of CF₃COOAg as a precursor to elemental silver. By adding a trace amount of NaSH and HCl to the polyol synthesis, Ag nanocubes were obtained with good quality, high reproducibility, and on a scale up to 0.19 g per batch for the 70 nm Ag nanocubes. The Ag nanocubes were found to grow in size at a controllable pace over the course of synthesis. The linear relationship between the edge length of the Ag nanocubes and the position of localized surface plasmon resonance (LSPR) peak provides a simple method for finely tuning and controlling the size of the Ag nanocubes by monitoring the UV/Vis spectra of the reaction at different times.     

Crystallization of silver stearate from sodium stearate dispersions

Silver carboxylates, the common silver source used for photothermographic imaging materials, are normally obtained from the reaction between sodium soap (e.g., sodium stearate) and silver nitrate. They form platelet-like crystals with a lamellar structure in water at room temperature. Light microscopy investigations reveal that the formation of silver stearate (AgSt) crystals follows a diffusion-controlled mechanism. The reaction between the sodium soap and silver nitrate preferentially occurs in solution rather than on the soap fiber solid interface. Cryogenic transmission electron microscopy, together with an on-the-grid reaction technique, provides a useful tool to directly image silver stearate microstructures at the initial stages of AgSt precipitation. The AgSt reaction product first forms particles about 5 nm in size, which is similar to the d-spacing of final AgSt crystals. Those particles aggregate to produce larger and loosely packed embryonic crystals, the precursors to the ultimate silver stearate crystals.     

Seed‐Mediated Growth of Silver Nanocubes in Aqueous Solution with Tunable Size and Their Conversion to Au Nanocages with Efficient Photothermal Property

Two seed‐mediated approaches for the growth of silver nanocubes in aqueous solution have been developed. Addition of a silver‐seed solution to a mixture of cetyltrimethylammonium chloride (CTAC), silver trifluoroacetate, and ascorbic acid and heating the solution at 60 °C for 1.5 h produces uniform Ag nanocubes with tunable sizes from 23 to 60 nm by simply adjusting the volume of silver‐seed solution introduced. Alternatively, the silver‐seed solution can be injected into a mixture of cetyltrimethylammonium bromide (CTAB), silver nitrate, copper sulfate, and ascorbic acid and heated to 80 °C for 2 h to generate 46 nm silver nanocubes. Plate‐like Ag nanocrystals exposing {111} surfaces can be synthesized by reducing Ag(NH₃)₂⁺ with ascorbic acid in a CTAC solution. Relatively large Ag nanocubes were converted to cuboctahedral Au/Ag and Au nanocages and nanoframes with empty {111} faces through a galvanic replacement reaction. The nanocages showed a progressive plasmonic band red‐shift with increasing Au content. The nanocages exhibited high and stable photothermal efficiency with solution temperatures quickly reaching beyond 100 °C when irradiated with an 808 nm laser for large heat and water vapor generation.     

Polydimethylsiloxane Soft Template Assisted Synthesis of Silver Nanoparticles via Vapor‐Solid Reaction Growth

A new route to synthesize silver nanoparticles via vapor‐solid reaction growth (VSRG) is reported. Employing AgCl to react with (Me₃Si)₄Si in a sealed tube (433–673 K) generates silver particles (diameter ≥ 10 μm). Addition of polydimethylsiloxnae (PDMS) to the reaction dramatically reduces the particle size (diameter 60–1200 nm). Moreover, formation of silver nanorods and nanocubes was discovered in some reaction conditions. Adding PDMS and varying the reaction temperature were the key factors influencing the Ag particle size.     

Ethylenediamine tetramethylene phosphonic acid assisted synthesis of palladium nanocubes and their electrocatalysis of formic acid oxidation

The synthesis of Pd nanocrystals of controlled size and morphology has drawn enormous interest due to their catalytic activity. We report a new and efficient strategy for the one-step synthesis of monodispersed Pd nanocubes with ethylenediamine tetramethylene phosphonate (EDTMP) as a complex-forming and capping agent. The morphology, structure, and growth mechanism of the Pd nanocubes were fully characterized via selected area electron diffraction (SAED), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). It was found that the morphology of the Pd nanocrystals in the proposed EDTMP–PdCl₂ system could be changed from octahedrons to nanocubes simply by adjusting the amount of iodide used during synthesis. After UV/ozone and electrochemical cleaning, the as-prepared Pd nanocubes demonstrated excellent electrocatalytic activity and stability during formic acid oxidation, owing to their abundant {100} facets and small particle size.     

Synthesis, alignment, and magnetic properties of monodisperse nickel nanocubes

This Communication describes the synthesis of highly monodispersed 12 nm nickel nanocubes. The cubic shape was achieved by using trioctylphosphine and hexadecylamine surfactants under a reducing hydrogen atmosphere to favor thermodynamic growth and the stabilization of {100} facets. Varying the metal precursor to trioctylphosphine ratio was found to alter the nanoparticle size and shape from 5 nm spherical nanoparticles to 12 nm nanocubes. High-resolution transmission electron microscopy showed that the nanocubes are protected from further oxidation by a 1 nm NiO shell. Synchrotron-based X-ray diffraction techniques showed the nickel nanocubes order into [100] aligned arrays. Magnetic studies showed the nickel nanocubes have over 4 times enhancement in magnetic saturation compared to spherical superparamagnetic nickel nanoparticles.     

One step in situ synthesis of Ag/AgCl nanoparticles in a cellulose nanofiber matrix for the development of energy storage paper

Cellulose - In the present work, we prepare Cellulose Nanofibers Films (CNFs) incorporating silver nanostructures (Ag/AgCl nanocubes) in a ratio of 1–20 wt% to the organic matrix. We found...     

Shape‐Dependent Catalytic Activity of Silver Nanoparticles for the Oxidation of Styrene

Metal nanoparticles with different shapes have different crystallographic faces. It is therefore of interest to study the effect of the shape of metal nanoparticles on their catalytic activity in various organic and inorganic reactions. Truncated triangular silver nanoplates with well‐defined planes were synthesized by a simple solvothermal approach. The activity of these truncated triangular silver nanoparticles was compared with that of cubic and near‐spherical silver nanoparticles in the oxidation of styrene in colloidal solution. It was found that the crystal faces of silver nanoparticles play an essential role in determining the catalytic oxidation properties. The silver nanocubes had the {100} crystal faces as the basal plane, whereas truncated triangular nanoplates and near‐spherical nanoparticles predominantly exposed the most‐stable {111} crystal faces. As a result, the rate of the reaction over the nanocubes was more than 14 times higher than that on nanoplates and four times higher than that on near‐spherical nanoparticles.     

Hydrothermal-induced assembly of colloidal silver spheres into various nanoparticles on the basis of HTAB-modified silver mirror reaction

Small colloidal silver spheres (diameter < 10 nm) were found to assemble into various silver nanoparticles including cubes, triangles, wires, and rods in water in the presence of HTAB (n-hexadecyltrimethylammonium bromide) at 120 degrees C, while the colloids were generated in situ on the basis of a HTAB-modified silver mirror reaction during the synthesis process. Adjustment of the synthesis parameters, in particular the concentrations of HTAB and [Ag(NH3)2]+, led to an obvious shape evolution of silver nanoparticles, thus resulting in the shape-selective formation of the silver nanoparticles. The monodisperse nanocubes with a well-defined crystallographical structure (a single crystal bounded by six {200} facets) have a strong tendency to assemble into two-dimensional arrays on substrates. The nanowires with uniform diameter usually existed in the form of two-dimensional alignments. The findings suggested that hydrothermal-induced assembly of small silver colloidal particles should be a convenient and effective approach to the preparation of various silver nanoparticles.     

Indirect fluorometric determination of diclofenac sodium.

A simple and easy method of analysis for diclofenac sodium is reported. A spectrofluorometric method for the microdetermination of diclofenac sodium has been developed through its reaction with cerium(IV) in an acidic solution and measurement of the fluorescence of the Ce(III) ions produced. Under the optimum experimental conditions for the oxidation reaction, 1.0 M H2SO4 with 90 min of heating time (100 degrees C), the range of application is 124.3-600 ng mL(-1) and the limit of detection is 72.7 ng mL(-1). The proposed method was applied to the determination of diclofenac sodium in pharmaceutical tablets. The results of the analysis show a good agreement with those obtained by the official USP 27 HPLC method.     

Fast and facile synthesis of silica coated silver nanoparticles by microwave irradiation

A novel, fast and facile microwave technique has been developed for preparing monodispersed silica coated silver (Ag@SiO(2)) nanoparticles. Without using any other surface coupling agents such as 3-aminopropyltrimethoxysilane (APS) or polymer such as polyvinyl pyrrolidone (PVP), Ag@SiO(2) nanoparticles could be easily prepared by microwave irradiation of a mixture of colloidal silver nanoparticles, tetraethoxysilane (TEOS) and catalyst for only 2 min. The thickness of silica shell could be conveniently controlled in the range of few nanometers (nm) to 80 nm by changing the concentration of TEOS. Transmission electron microscopy (TEM) and UV-visible spectroscopy were employed to characterize the morphology and optical properties of the prepared Ag@SiO(2) nanoparticles, respectively. The prepared Ag@SiO(2) nanoparticles exhibited a change in surface plasmon absorption depending on the silica thickness. Compared to the conventional techniques based on St?ber method, which need 4-24 h for silica coating of Ag nanoparticles, this new technique is capable of synthesizing monodispersed, uniform and single core containing Ag@SiO(2) nanoparticles within very short reaction time. In addition, straightforward surface functionalization of the prepared Ag@SiO(2) nanoparticles with desired functional groups was performed to make the particles useful for many applications. The components of surface functionalized nanoparticles were examined by Fourier transform infrared (FT-IR) spectroscopy, zeta potential measurements and X-ray photoelectron spectroscopy (XPS).     

Crystallization of silver carboxylates from sodium carboxylate mixtures

Silver carboxylates can be made by the reaction of silver nitrate and the corresponding sodium carboxylates. The length of the alkyl chain has a significant impact on the product behavior. In this study, 18, 20, and 22 carbon chains (stearate, arachidate, and behenate, respectively) have been selected. All three sodium carboxylates are very insoluble in water at room temperature. Solutions are obtained above the Krafft temperature, which precipitates lamellar crystals if cooled at the proper cooling rate. Depending on the chain length, metastable morphologies, such as vesicles and tiny fibers, can be seen consecutively before hexagonal plates form. The carboxylate with the shorter chain length reaches equilibrium more quickly. All three silver carboxylates also take on a lamellar structure. Small-angle X-ray scattering (SAXS) shows that the d spacing of the crystals increases as the chain length increases. Cryo-TEM illustrates that the crystallites are the result of micelle nucleation and micelle aggregation. In addition, the crystallization process in the presence of silver bromide nanocrystals has been investigated. In the initial stage, an epitaxial interface is formed between the silver carboxylate crystallites and the cubic silver bromide grains. Budlike and strandlike structures grow because of it. The consequent strand enclosure restrains the crystal growth, which reduces the size and changes the morphology of the crystals.     

A localized surface plasmon resonance light scattering-based sensing of hydroquinone via the formed silver nanoparticles in system

In this contribution, a simple strategy for the detection of hydroquinone (HQ) is proposed based on the localized surface plasmon resonance light scattering (LSPR-LS) of the silver nanoparticles (AgNPs) formed through the modified silver mirror reaction. The redox reaction between HQ and silver ammonia occurred in the coexistence of sodium hydroxide and ammonia at room temperature, where silver ammonia was reduced by HQ and resulted in the formation of AgNPs without adding the AgNPs seeds. The formed AgNPs were demonstrated to be monodisperse and uniform by transmission electron microscopy (TEM) image. We also studied the localized surface plasmon resonance absorption (LSPR-A) and LSPR-LS spectra using both a UV-vis spectrophotometer and a common spectrofluorometer, and obtained a good agreement between experiments. By carefully optimizing the amount of NaOH and ammonia of the reaction conditions, we were able to obtain the highest net intensity of LSPR-LS on the concentrations of HQ. On the basis of experimental studies, the LSPR-LS intensity enhanced linearly over the range 0.4-2.5 μmol L(-1) with the corresponding limits of determination (3σ) of 70.6 nmol L(-1). With that, the present approach was applied to detect HQ in water samples with satisfactory results.     

Silver staining of collagen type I after sodium dodecylsulphate polyacrylamide gel electrophoresis: effect of Maillard reaction.

Differences in the acidic silver staining, after sodium dodecylsulphate polyacrylamide gel electrophoresis, between the alpha 1 and alpha 2 collagen chains, as well as between rat-tail tendon and calf-skin collagen type I, were observed. The staining conditions at which the staining differences are both most expressed and reproducible were characterized. Age differences between staining of the alpha 1 CB6 fragment from young rats (2 and 12 months) and old rats (29 months) indicated that different susceptibilities of collagen species to the silver staining can be the result of different extents of some age-dependent post-translational modification, such as glycation. In vitro incubation of acid-soluble rat-tail tendon collagen with various sugars led to an increase in silver staining compared with samples incubated in the absence of sugar. This effect was inhibited by sodium cyanoborohydride, diethylenetriamine pentaacetic acid and aminoguanidine, i.e. compounds inhibiting the Maillard reaction at various stages. It can be concluded that the enhanced silver susceptibility of glycated collagen is related to advanced-phase Maillard reaction products attached to collagen.     

Preparation and the mechanisms of formation of silver particles of different morphologies in homogeneous solutions

Uniform, well-dispersed silver particles of various morphologies have been prepared by reducing highly acidic silver nitrate solutions with ascorbic acid in the presence of a sodium naphthalene sulfonate-formaldehyde copolymer as dispersing agent. By varying the temperature of the reaction, the free acid content, the addition rate of the reductant, and the aging time, both isometric and anisotropic silver particles could be obtained. It was found that the latter were formed by aggregation of nanosize subunits, which were identified by electron microscopy and X-ray diffractometry.     

Formal kinetics of growth of nanosized silver particles upon silver nitrate reduction with sodium citrate in a reverse micellar solution of AOT

The growth kinetics of silver nanoparticles upon silver(I) reduction with sodium citrate in an aqueous solution solubilized to a reverse micellar solution of sodium bis(2-ethylhexyl) sulfosuccinate in decane is studied spectrophotometrically under constant conditions of irradiation of the reaction mixture with visible light. The formal kinetics of the process corresponds to an autocatalytic mechanism. The effective rate constants of growth of silver nanoparticles, unlike those of gold nanoparticles, are independent of the size of the inner micellar cavity when its radius changes from 2 to 6 nm. This is most likely due to a great effect of the photochemical factor or Ag⁺ localization in the inner surface layer of the micelles on the rate constants.