Chemiluminescence determination of ω-chloroacetophenone

A chemiluminescence method for the determination of ω-chloroacetophenone in ethanolic extracts is elaborated. The method is based on the linearity of the concentration dependence of the intensity of luminol chemiluminescence upon the action of peroxide species forming in the reaction of ω-chloroacetophenone with air oxygen activated by hemin in alkaline solutions. The detection limit makes (1.0 ± 0.3) × 10⁻⁵ mg/mL (P = 0.95, n = 5, RSD = 32 %) at 293 K.     

A facile and fast electrochemical method for the simultaneous determination of <Emphasis Type="Italic">o</Emphasis>-dihydroxybenzene and <Emphasis Type="Italic">p</Emphasis>-dihydroxybenzene using a surfactant

A fast and convenient analytical technique has been suggested to detect dihydroxybenzene (DHB) isomers directly and simultaneously. In 0.1 M HAc-NaAc buffer solution (pH 5.6), the reduction peaks of p -DHB and o -DHB were partly separated by differential pulse voltammetry at the glassy carbon electrode. By adding a surfactant (cetyl pyridinium chloride) to enhance the detection sensitivity and using a semi-derivative technique to improve the separation, p-DHB and o-DHB were detected simultaneously. The linear calibration ranges were 1.2 × 10⁻⁶ to 1.0 × 10⁻⁴ M for p -DHB and 8.2 × 10⁻⁷ to 1.0 × 10⁻⁴ M for o -DHB, with detection limits of 3.6 × 10⁻⁷ and 2.4 × 10⁻⁷ M, respectively. The proposed method has been applied to the direct determination of DHB isomers in water sample, and the results were excellent. The text was submitted by the authors in English.     

Molecularly imprinted solid-phase extraction and flow-injection chemiluminescence for trace analysis of 2,4-dichlorophenol in water samples

Highly sensitive flow-injection chemiluminescence (CL) combined with molecularly imprinted solid-phase extraction (MISPE) has been used for determination of 2,4-dichlorophenol (2,4-DCP) in water samples. The molecularly imprinted polymer (MIP) for 2,4-DCP was prepared by non-covalent molecular imprinting methods, using 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EGDMA) as the monomer and cross-linker, respectively. 2,4-DCP could be selectively adsorbed by the MIP and the adsorbed 2,4-DCP was determined by its enhancing effect on the weak chemiluminescence reaction between potassium permanganate and luminol. The enhanced CL intensity was linear in the range from 1 × 10⁻⁷ to 2 × 10⁻⁵g mL⁻¹. The LOD (S/N = 3) was 1.8 × 10⁻⁸g mL⁻¹, and the relative standard deviation (RSD) was 3.0% (n = 11) for 1.4 × 10⁻⁶g mL⁻¹. The proposed method had been successfully applied to the determination of 2,4-DCP in river water. Figure Effect of 4-VP content on the ultraviolet spectrum of 2,4-DCP in chloroform     

Ultrasensitive Assay of Rhein in Medicine Based on its Enhanced Luminol-K3Fe(CN)6 Chemiluminescence Reaction Using the Flow Injection Technique

Determination of the effective components in traditional Chinese medicine is one of the key steps for its identification. In this paper a novel and sensitive chemiluminescence (CL) method for the determination of rhein coupled with flow-injection analysis (FIA) is developed. It is based on the strong sensitizing effect on the weak CL reaction between luminol and ferricyanide in alkaline solution. Under optimal experimental conditions, the relative CL intensity is proportional to the concentration of rhein in the range of 7.0 × 10⁻¹²–7.0 × 10⁻¹⁰ mol L⁻¹ and 1.0 × 10⁻⁹–4.0 × 10⁻⁵ mol L⁻¹, the detection limit is 1.478 × 10⁻¹³ mol L⁻¹, and the relative standard deviation (RSD) for 9 parallel measurements of 1.408 × 10⁻⁷ mol L⁻¹ rhein is 3.4%. The method was successfully applied to the determination of rhein in pharmaceutical preparations. The possible mechanism of CL is also briefly discussed.     

Chemiluminescence determination of gossypol at trace levels using flow injection as sample introduction techniques

A simple and sensitive flow injection method with chemiluminescence (CL) detection is developed for the determination of gossypol at trace levels. The method is based on the reaction of luminol with ferricyanid in a sodium hydroxide medium sensitized by gossypol. Under the optimum conditions, the CL intensity is proportional to the concentration of gossypol over the range of 1.11 × 10⁻¹⁷ − 2.78 × 10⁻¹⁶ M in an acidic solution and 8.00 × 10⁻¹¹ − 7.39 × 10⁻⁸ M in a neutral solution with correlation coefficients of 0.9983 and 0.9905, respectively. The detection limit is 1.48 × 10⁻¹⁸ M (3σ). The proposed method has been applied to the determination of gossypol in cottonseeds and pharmaceutical preparations with satisfactory results. The CL mechanism is discussed by examining the CL emission spectrum and the effect of various free radical scavengers on the CL emission intensity. The text was submitted by the authors in English.     

Chemiluminescence mechanisms of cerium-norfloxacin and its application in urine analysis

In this article, novel chemiluminescence mechanisms between norfloxacin and cerium(IV) in an acidic medium were studied. Chemiluminescence spectra of the present system were recorded observing three maximum emissions at about 475 nm, 550 nm, and 620 nm, respectively. The results indicate that the chemiluminescence peaks located at 475 nm and 620 nm can be ascribed to the emission of a singlet oxygen, while the chemiluminescence emission at 550 nm occurred in course of the reaction between acidic cerium(IV) and the phenolic intermediate. Under optimum conditions, the chemiluminescence intensity was linear with the concentration of norfloxacin over the range of 2.0 × 10⁻⁸−1.0 × 10⁻⁵ g mL⁻¹ and the detection limit of 1.0 × 10⁻⁸ g mL⁻¹ (S/N = 3). The relative standard deviation was 1.94 % for a 4.0 × 10⁻⁷ g mL⁻¹ norfloxacin solution considering eleven repeated measurements. The present chemiluminescence system was successfully applied in the determination of norfloxacin in pharmaceutical preparations and concentration-time profiles in urine.     

Determination of p-nitroaniline by the tartrate-acetone-Mn2+-KBrO3-H2SO4 double organic substrate oscillating system using non-equilibrium stationary state

This paper described the determination of p-nitroaniline in a double organic substrate oscillating system of tartrate-acetone-Mn²⁺-KBrO₃-H₂SO₄. Under the optimum conditions, temperature was chosen as a control parameter to design the bifurcation point and proposed a convenient method for determination of p-nitroaniline. Results showed that the system consisting of 3.5 mL 0.06 mol L⁻¹ tartrate, 4.0 mL 0.7 mol L⁻¹ H₂SO₄, 1.5 mL 1.5×10⁻⁴ mol L⁻¹ MnSO₄, 4.0 mL 0.4 mol L⁻¹ acetone and 7.0 mL 0.05 mol L⁻¹ KBrO₃ was very sensitive to the surrounding at 33.5°C. A good linear relationship between the potential difference and the negative logarithm concentration of p-nitroaniline was obtained to be in the range of 2.50×10⁻⁷∼3.75×10⁻⁵ mol L⁻¹ with a lower detection limit of 2.50×10⁻⁸ mol L⁻¹.      

Chemiluminescence determination of chromium(III) and total chromium in water samples using the periodate-lucigenin reaction

A new chemiluminescence (CL) method combined with flow injection technique is described for the determination of Cr(III) and total Cr. It is found that a strong CL signal is generated from the reaction of Cr(III), lucigenin and KIO₄ in alkaline condition. The determination of total Cr is performed by pre-reduction of Cr(VI) to Cr(III) by using H₂SO₃. The CL intensity is linearly related to the concentration of Cr in the range 4.0 × 10⁻¹⁰–1.0 × 10⁻⁶ g mL⁻¹. The detection limit (3s _b) is 1 × 10⁻¹⁰ g mL⁻¹ Cr and the relative standard deviation is 1.9% (5.0 × 10⁻⁸ g mL⁻¹ of Cr(III) solution, n = 11). The method was applied to the determination of Cr(III) and total Cr in water samples and compared satisfactorily with the official method.     

A Novel Enhancing Flow-Injection Chemiluminescence Method for the Determination of Glutathione Using the Reaction of Luminol with Hydrogen Peroxide

 A rapid flow-injection method with chemiluminescence (CL) detection is described for the determination of glutathione (GSH). The method is based on the CL reaction of luminol and hydrogen peroxide. GSH can greatly enhance the chemiluminescence intensity in 0.1 mol/L borax–sodium hydroxide buffer solution (pH = 9.7). The maximum CL intensity was directly proportional to the concentration of GSH in the range 3.0 × 10⁻⁷–2.0 × 10⁻⁵ mol/L, and the detection limit was 6.8 × 10⁻⁸ mol/L. The relative standard deviation was 3.4% for 5.0 × 10⁻⁶ mol/L of GSH (n = 11). Received October 23, 2001; accepted June 18, 2002     

Flow-injection analysis for the determination of total inorganic carbon and total organic carbon in water using the H2O2–luminol–uranine chemiluminescent reaction

In the presence of carbonate and uranine, the chemiluminescent intensity from the reaction of luminol with hydrogen peroxide was dramatically enhanced in a basic medium. Based on this fact and coupled with the technique of flow-injection analysis, a highly sensitive method was developed for the determination of carbonate with a wide linear range. The method provided the determination of carbonate with a wide linear range of 1.0 × 10⁻¹⁰–5.0 × 10⁻⁶ mol L⁻¹ and a low detection limit (S/N = 3) of carbonate of 1.2 × 10⁻¹¹ mol L⁻¹. The average relative standard deviation for 1.0 × 10⁻⁹–9.0 × 10⁻⁷ mol L⁻¹ of carbonate was 3.7% (n = 11). Combined with the wet oxidation of potassium persulfate, the method was applied to the simultaneous determination of total inorganic carbon (TIC) and total organic carbon (TOC) in water. The linear ranges for TIC and TOC were 1.2 × 10⁻⁶–6.0 × 10⁻² mg L⁻¹ and 0.08–30 mg L⁻¹ carbon, respectively. Recoveries of 97.4–106.4% for TIC and 96.0–98.5% for TOC were obtained by adding 5 or 50 mg L⁻¹ of carbon to the water samples. The relative standard deviations (RSDs) were 2.6–4.8% for TIC and 4.6–6.6% for TOC (n = 5). The mechanism of the chemiluminescent reaction was also explored and a reasonable explanation about chemical energy transfer from luminol to uranine was proposed. Figure Chemiluminescence profiles in batch system. 1, Injection of 100 μL of K₂CO₃ into 1.0 mL luminol-1.0 mL H₂O₂ solution; 2-3 and 4-5, Injection in sequence of 100 μL of K₂CO₃ and 100 μL of uranine into 1.0 ml luminol-1.0 mL H₂O₂ solution; C_luminol = 1.0 × 10⁻⁷ mol/L, C_H2O2 = 1.0 × 10⁻⁵ mol/L, C_uranine = 1.0 × 10⁻⁵ mol/L, C_K2CO3 = 1.0 × 10⁻⁷ mol/L except for 4-5 where C_K2CO3 = 1.0 × 10⁻⁴ mol/L     

Determination of norfloxacin in pharmaceuticals,human serum,and urine using a luminol—dissolved oxygen chemiluminescence system

A sensitive chemiluminescence method, based on the enhancive effect of norfloxacin on the reaction between luminol and dissolved oxygen in a flow injection system, was proposed for the determination of norfloxacin. The increment of the chemiluminiscence intensity was proportional to the concentration of norfloxacin, giving a calibration graph linear over the concentration from 0.4 ng mL⁻¹ to 400.0 ng mL⁻¹ (r ² = 0.9988) with the detection limit of 0.1 ng mL⁻¹ (3 × σ _noise). At the flow rate of 2.0 mL min⁻¹, a complete determination of norfloxacin, including sampling and washing, could be accomplished in 30 s with the relative standard deviation lower than 3.0 %. The proposed method was applied successfully to determine norfloxacin in pharmaceuticals, human urine, and serum. Possible mechanism of the reaction was also discussed.     

A lanthanide sensitized chemiluminescence method of flow-injection for the determination of ulifloxacin and prulifloxacin

A lanthanide sensitized chemiluminescence method of flow-injection was developed for the determination of a new fluoroquinolone, ulifloxacin (UFX), and its prodrug prulifloxacin (PUFX). The proposed method was based on the remarkable chemiluminescence enhancement effect of UFX (PUFX) on KMnO₄−Na₂S₂O₄−Ln(III). Tb(III) ion was chosen from lanthanides because it showed the best sensitizing effect. Under optimized experimental conditions, the relative chemiluminescence intensity was in linear relationship with UFX and PUFX concentrations in the ranges of 1.0 × 10⁻⁸ − 5.0 × 10⁻⁶ M and 9.0 × 10⁻⁹ − 5.0 × 10⁻⁶ M, respectively. The minimum detectable value and relative standard deviation were 5.5 × 10⁻⁹ M, 1.5% for UFX and 7.0 × 10⁻⁹ M, 2.9% for PUFX, respectively. The proposed method was applied to the determination of UFX in spiked human serum and urine, and of PUFX in tablets with satisfactory results. The possible mechanism of chemiluminescence was also proposed. The text was submitted by the authors in English.     

Growth and characterization of Mn- and Co-doped ZnO nanowires

A flow injection chemiluminescence method is proposed for the determination of cobalt, based on the strong catalytic effect of Cobalt(II) (1,10-phenanthroline)₃ complex on the lucigenin-periodate reaction in alkaline medium. Under the optimum experimental conditions, the chemiluminescence signal responded linearly to the concentration of cobalt(II) in the 1.0 × 10⁻⁹–3.0 × 10⁻⁷ g mL⁻¹ range with a detection limit of 4.4 × 10⁻¹⁰ g mL⁻¹ cobalt(II). The relative standard deviation for the determination of 5.0 × 10⁻⁸ g mL⁻¹ of cobalt was 2.3% in eleven replicated measurements. The method was successfully applied to the determination of cobalt(II) in pharmaceutical preparations.     

Sensitive Chemiluminescence Determination of Three Thiol Compounds Based on Cu(II)-Catalyzing Luminol Reaction in the Absence of an Oxidant

Abstract

A simple and sensitive flow-injection chemiluminescence method was proposed for the determination of three thiol compounds, namely cysteine, acetylcysteine, and glutathione. Weak chemiluminescence was produced directly by the reaction of these mentioned compounds with luminol in an alkaline solution without adding any special oxidants. The chemiluminescence signal could be significantly enhanced by Cu(II). The proposed method allows the determination of 4.0 × 10^?9 to 1.0 × 10^?7 g/mL cysteine, 7.0 × 10^?10 to 1.0 × 10^?7 g/mL acetylcysteine, and 4.0 × 10^?9 to 1.0 × 10^?6 g/mL glutathione with the detection limits of 8 × 10^?10 g/mL, 2 × 10^?11 g/mL, and 7 × 10^?10 g/mL, respectively. The proposed method was applied to the analysis of some commercial formulations containing acetylcysteine.     

Investigating the post-chemiluminescence behavior of phenothiazine medications in the luminol–potassium ferricyanide system: molecular imprinting–post-chemiluminescence method for the determination of chlorpromazine hydrochloride

A new post-chemiluminescence (PCL) phenomenon was observed when phenothiazine medications were injected into the reaction mixture after the chemiluminescence (CL) reaction of luminol and potassium ferricyanide had finished. A possible reaction mechanism was proposed based on studies of the kinetic characteristics of the CL, CL spectra, fluorescence spectra, and on other experiments. The feasibility of determining various phenothiazine medications by utilizing these PCL reactions was examined. A molecular imprinting–post-chemiluminescence (MI-PCL) method was established for the determination of chlorpromazine hydrochloride using a chlorpromazine hydrochloride-imprinted polymer (MIP) as the recognition material. The method displayed high selectivity and high sensitivity. The linear range of the method was 1.0×10⁻⁸∼1.0×10⁻⁶, with a linear correlation coefficient of 0.9985. The detection limit was 3×10⁻⁹ g/ml chlorpromazine hydrochloride, and the relative standard deviation for a 1.0×10⁻⁷ g/ml chlorpromazine hydrochloride solution was 4.0% (n=11). The method has been applied to the determination of chlorpromazine hydrochloride in urine and animal drinking water with satisfactory results.      

Lead-selective poly(vinyl choride) membrane electrodes based on heterocyclic thiocarboxylic acid

Heterocyclic thiocarboxylic acids have been designed to prepare polymeric membrane ion-selective electrode (ISE) for Pb²⁺. Construction, response characteristic and application of the lead ISEs are investigated. Better results have been obtained with membranes containing ligands L1∼L3 with bis(2-ethylhexyl) sebacate (DOS) as a plasticizer. Ionophores L1∼L3 are [(4,6-dimethyl-2-pyrimidinyl) thio] acetic acid (L1), (1,3,4-thiadiazole-2,5-diyldithio) diacetic acid (L2) and (1,3,4-thiadiazole-2,5-diyldithio) dipropionic acid (L3). The optimum electrodes have the composition of L1 (1.6): PVC (32.7): DOS (65.3): KT _p ClPB (0.4) (w/w), L2 (1.0): PVC (32.8): DOS (66.0): KT _p ClPB (0.2) (w/w), and L3 (1.0): PVC (32.7): DOS (65.4): KT _p ClPB (0.9) (w/w). The optimized membrane electrodes work well over a wide range of concentrations (1.0 × 10⁻⁵ ∼1.0 × 10⁻² M, 1.0 × 10⁻⁶ ∼1.0 × 10⁻² M, and 1.0 × 10⁻⁶ ∼1.0 × 10⁻² M) with the response slope of 27.4, 30.1 and 29.2 mV/decade, respectively. Potentiometric selectivities of the ISEs based on L1 ∼ L3 for Pb²⁺ over other interfering ions are determined with the fix interference method. The electrodes display good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. The lifetime of the electrodes is about 2 months and their response time is 20 s. Applications of these electrodes for the determination of lead in real samples and as indicator electrodes for potentiometric titration of Na₂SO₄ using Pb²⁺ solution are reported.     

Simultaneous determination of phenylenediamine isomers and dihydroxybenzene isomers in hair dyes by capillary zone electrophoresis coupled with amperometric detection

The simultaneous determination of three isomers of phenylenediamines (o, m, and p-phenylenediamine) and two isomers of dihydroxybenzenes (catechol and resorcinol) in hair dyes was performed by capillary zone electrophoresis coupled with amperometric detection (CZE–AD). The effects of working electrode potential, pH and concentration of running buffer, separation voltage, and injection time on CZE–AD were investigated. Under the optimum conditions the five analytes could be perfectly separated in 0.30 mol L⁻¹ borate–0.40 mol L⁻¹ phosphate buffer (pH 5.8) within 15 min. A 300 μm diameter platinum electrode had good responses at +0.85 V (versus SCE) for the five analytes. Their linear ranges were from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ and the detection limits were as low as 10⁻⁷ mol L⁻¹ (S/N = 3). This working electrode was successfully used to analyze eight kinds of hair dye sample with recoveries in the range 91.0–108.0% and RSDs less than 5.0%. These results demonstrated that capillary zone electrophoresis coupled with electrochemical detection using a platinum working electrode as detector was convenient, highly sensitive, highly repeatable and could be used in the rapid determination of practical samples. Figure Electropherograms obtained from 10 mg mL⁻¹ hair dye sample solutions at a platinum working electrode under optimum CZE–AD conditions: (a) natural black (I), (b) golden: (1) p-phenylenediamine, (2) m-phenylenediamine, (3) o-phenylenediamine, (4) resorcinol, and (5) catechol     

Determination of thiocyanate ions at nanolevel in real samples using coated graphite electrode based on synthesised macrocyclic Zn(II) complex

The electrode characteristics and selectivities of PVC-based thiocyanate selective polymeric membrane electrode (PME) incorporating the newly synthesized zinc complex of 6,7:14,15-Bzo₂-10,11-(4-methylbenzene)-[15]-6,8,12,14-tetraene-9,12-N₂-1,5-O₂ (I ₁ ) and zinc complex of 6,7:14,15-Bzo₂-10,11-(4-methylbenzene)-[15]-6,14-diene-9,12-dimethylacrylate-9,12-N₂-1,5-O₂ (I ₂ ) are reported here. The best response was observed with the membrane having a composition of I₂:PVC:o-NPOE:HTAB in the ratio of 6:33:59:2 (w/w; milligram). This electrode exhibited Nernstian slope for thiocyanate ions over working concentration range of 4.4 × 10⁻⁷ to 1.0 × 10⁻² mol L⁻¹ with detection limit of 2.2 × 10⁻⁷ mol L⁻¹. The performance of this electrode was compared with coated graphite electrode (CGE), which showed better response characteristics w.r.t Nernstian slope 59.0 ± 0.2 mV decade⁻¹ activity, wide concentration range of 8.9 × 10⁻⁸ to 1.0 × 10⁻² mol L⁻¹ and detection limit of 6.7 × 10⁻⁸ mol L⁻¹. The response time for CGE and PME was found to be 8 and 10 s, respectively. The proposed electrode (CGE) was successfully applied to direct determination of thiocyanate in biological and environmental samples and also as indicator electrode in potentiometric titration of SCN⁻ ion.     

Online phototransformation–flow injection chemiluminescence determination of triclosan

A highly selective and sensitive chemiluminescence method for the determination of triclosan is proposed. The method is based on the phototransformation of triclosan to a light-emitting precursor in the presence of fluorescein in alkaline medium and the chemiluminescence reaction is then triggered by strong base or oxidants such as N-bromosuccinimide. Based on this reaction an online phototransformation–flow injection manifold was developed, in which the photoreactor comprises a 150-cm-long × 0.8-mm-i.d. piece of PTFE tubing coiled around a 25-W fluorescent lamp, and the phototransformed products were then injected into a carrier stream of borate buffer. After mixing with the oxidant stream the produced light was detected by a photomultiplier. A wide calibration range from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁴ mol L⁻¹ was obtained under the optimized conditions, and the detection limit was as low as 5.0 × 10⁻⁸ mol L⁻¹. The whole process of analysis, including the online phototransformation and subsequent chemiluminescence detection, could be completed in 6 min. Most of the foreign substances tested showed high tolerance levels, and the proposed method was directly applied to the determination of triclosan in toothpaste samples without any pre-separation procedure. Figure Schematic representation of the phototransformation of triclosan and subsequent chemiluminescence reaction     

Chemiluminescence Determination of Cyanide Ions

It was found that alkaline solutions of luminol exhibit chemiluminescence in the presence of p-nitrobenzaldehyde (p-NBA), hemin, and cyanide ions. Air oxygen dissolved in the solutions is an essential component of the process. The kinetics of luminol chemiluminescence in the presence of p-NBA, hemin, and cyanide ions indicates the catalytic nature of the process. A scheme was proposed for the series of reactions resulting in chemiluminescence and generated by superoxide radicals formed in the p-NBA-catalyzed reaction between hemin-activated air oxygen and hydrated p-NBA species. A procedure was developed with a determination limit of (1.0 ± 0.3) × 10^?7 mg/mL (n = 5, P = 0.95) for cyanide ions.