New cobalt trimethylacetate complexes with pyridine

The reaction of the tetranuclear trimethylacetate complex Co₄(₃-OH)₂(-OOCCMe₃)₄(²-OOCCMe₃)₂(EtOH)₆ with pyridine in acetonitrile was studied. Two new compounds, viz., the hexanuclear cobalt(ii) complex Co₆py₄(₃-OH)₂(-OOCCMe₃)₁₀ (25% yield) and the unusual ionic compound [Co₃py₃(₃-O)(-OOCCMe₃)₆]⁺[Co₄py(₄-O)(-OOCCMe₃)₇]^– (5% yield), were prepared. The structures of the new compounds were established by X-ray diffraction analysis.     

Production of96Tc and95mTc via the93Nb(α, xn) Reactions

Relatively longer liver technetium tracers such as^95mTc (61 d) are useful for the development, evaluation and comparison of new technetium complexes for eventual development of^99mTc radiopharmaceuticals. The feasibility of producing⁹⁶Tc (4.35 d) and^95mTc (61 d) was studied by the alpha bombardment of pure Nb targets (⁹³Nb-100%).⁹⁶Tc was obtained in a yield of 30 Ci/Ah using 16 MeV alphas, but it contained significant activity of⁹⁵Tc (20 h) Relatively pure⁹⁶Tc and^95mTc was produced in yields of 18 Ci/Ah and about 1 Ci/Ah respectively with alphas of suitable energy and after allowing for suitable cooling periods after the end of bombardment (EOB).     

Estimation and Comparison of Pore Charge on Titania and Zirconia Membranes Prepared by Sol-Gel Route Using Zeta Potential Measurement

An attempt has been made to synthesize ceramic titania and zirconia membranes by sol-gel process by filtering respective viscous colloidal sol through microporous alumina support and gelling followed by sintering at 400°C and 470°C respectively. The static charge on the pores of the so formed membranes and the pore size distribution determine the applicability in filtering colloidal solution. The mean pore size from SEM were found to be 0.65 m and 0.54 m for titania and zirconia membranes respectively with 1.47 × 10⁷/cm² as pore density for both. The filtration characteristics during membrane layer formation showed that the membrane layer formation started after 35 minutes in the case of titania membrane and 40 minutes in the case of zirconia membrane. From the gravimetric estimation of water content of the membranes the thickness of the membrane was found out to be 3 m and the porosity was found out to be 0.30 for both the cases. The particle charge density was estimated from the zeta potential and the particle size. The pore charge density was estimated from the particle charge density, pore density, pore diameter and the thickness of the membrane layer. The membrane pore charge density was found to vary between 3 to –1 Coulombs/cm² in the case of titania membrane and 7 to –0.5 Coulombs/cm² in the case of zirconia membrane in the pH range 1–12.     

The composition of volatile and particulate hydrocarbons in urban air

Summary The hydrocarbon composition of the particle and gas phases in the urban atmosphere has been studied by filtration and parallel adsorption on active charcoal and polyurethane foam (PUF). Gas chromatography (GC) and GC coupled to mass spectrometry (GC-MS) have been used for the analysis of the organic matter extracts obtained with each system. In the case of the particle and PUF samples these extracts were fractionated into aliphatic and aromatic compounds. This approach has allowed to identify up to 247 hydrocarbon molecules showing that C0–C5 alkylbenzenes are the major compounds in the charcoal extracts whereas C14–C23 n-alkanes, C0–C4 alkylnaphthalenes, C0–C4 alkylbiphenyls and C3–C5 alkylbenzenes are those predominantly found in the PUF materials. The particles essentially contain C17–C38 n-alkanes and parent polycyclic aromatic hydrocarbons (PAH). These qualitative differences are paralleled by a progressive concentration decrease from the more to the less volatile hydrocarbons. Thus, the total charcoal extracts average 80 g/m³, the PUF compounds represent 4 /m³ and the particle hydrocarbons 0.7 g/m³. These latter airborne materials are essentially composed of petrogenic residues 0.6 g/m³ (aliphatic fraction) whereas the pyrolytic PAH only involve 0.08 g/m³.     

Fluoridbestimrnung in Wasser und Luft mit ionenselektiven Elektroden

Zusammenfassung Systematische Bestimmungen des Fluoridgehaltes in verschiedenen Wasserproben aus Serbien und in Luftproben aus einigen In-dustriegebieten und aus der Stadt Belgrad wurden durchgeführt. Außerdem wurde der Fluoridgehalt in einigen meistkonsumierten Mineralwässern aus alien Territorien Jugoslawiens geprüft. Etwa 600 Proben wurden analysiert. Die Ergebnisse sollen für die kartographische Erfassung der Verteilung von Fluor im Trinkwasser dienen.

---

Determination of fluoride in Yugoslavian air and water with an ion-sensitive electrode

Summary Fluoride has been measured in over 600 samples of air and water with an ion-sensitive electrode. The concentrations found in the air samples were 1.6–l08g/m³ for industrial areas, 1.9–25.6g/m³ for urban areas and 1.1–18.4g/m³ for rural areas. Most of the samples had fluoride levels below 20g/m³3. The concentrations found in water samples were 0.12–0.34g/litre for drinking water and 0.27–5.6g/litre, for mineral waters.

     

Method comparison study on soot-selective techniques

In a long-term field study at two locations with different air pollution levels several soot-selective measurement techniques were compared with a thermochemical method which measures non-extractable carbon (NEC) detecting the evolved CO₂ by means of coulometric titration. The attenuation measurement technique (aethalometer) and the aerosol photoemission method showed good correlations to NEC for concentrations ranging from 1.6g/m³ to 40.8g/m³. The specific mass absorption coefficient of black carbon with respect to NEC varied between 8.4m²/g and 13.7m²/g with respect to the measurement sites, but the value was found to remain constant at each site independent of seasonal or meteorological variations. The ratio of photoelectric signal to NEC varied between 16 fA·(g/m³)^–1 and 33 fA·(g/m³)^–1 depending on the age of the aerosol. The diurnal variations of that ratio showed strong similarities to the traffic patterns. Additionally a slight temperature dependence of this ratio was found for the aged aerosol with a proportionality factor of – 0.35 fA·(K·g/m³)^–1. With the reflectance measurement technique (smoke shade method) reliable NEC determination was not possible for NEC concentrations 5 g/m³.     

Fallout analysis of atmospheric water precipitations

Summary A rapid ion-exchange method for the determination of ¹⁴⁴Ce, ¹³⁷Cs, ⁸⁹Sr, ⁹⁰Sr and ¹⁴⁰Ba in 2–30 liter samples of atmospheric water precipitations is described. The samples, containing up to 300 mg of calcium, are sorbed on a specially shaped column filled with Dowex 50, X-8 or Dowex 50W, X-8. Radio-cerium and radio-caesium are stripped from the column with 0.6 M ammonium glycolate/ 0.2 M NaCl, pH 5, radio-strontium and radio-barium with 0.15 M ammonium citrate, pH 7.5. The isolated radio-nuclides are counted on a low-background beta-counter: ¹⁴⁴Ce as CeO₂, ¹³⁷Cs as Cs-dipicrylaminate, ⁸⁹Sr/⁹⁰Sr as SrCO₃, ⁹⁰Y as Y₂O₃, and ¹⁴⁰Ba as BaCO₃. The mean chemical yields amount to 95% for cerium, 85% for caesium, 95% for strontium, 95% for yttrium and 65% for barium. With parallel determinations at levels of a few picocuries, the deviations of the results from the respective mean values generally do not exceed ± 5%. With a 30 l sample the limit of detection amounts to 0.005 Ci/l for ¹⁴⁴Ce, 0.006 Ci/l for ¹³⁷Cs, 0.005 Ci/l for ⁹⁰Sr, and 0.006 Ci/l for ¹⁴⁰Ba.

---

Zusammenfassung Es wird eine schnelle Ionenaustauschmethode für die Bestimmung von ¹⁴⁴Ce, ¹³⁷Cs, ⁸⁹Sr, ⁹⁰Sr und ¹⁴⁰Ba in 2–30 l Proben von atmosphärischen Wasser-Niederschlägen beschrieben. Die Proben, mit einem Calciumgehalt bis zu 300 mg, werden in eine besonders gestaltete, mit Dowex 50, X-8 oder Dowex 50 W, X-8 gefüllte Säule eingewaschen. Radio-Cer und Radio-Caesium werden mit 0,6 M Ammoniumglykolat/0,2 M NaCl, pH 5, Radio-Strontium und Radio-Barium mit 0,15 M Ammoniumcitrat pH 7,5 eluiert. Die isolierten Radio-Nuklide werden in einem Beta-Antikoinzidenzzähler gemessen: ¹⁴⁴Ce als CeO₂, ¹³⁷Cs als Cs-dipikrylaminat, ⁸⁹Sr/⁹⁰Sr als SrCO₃, ⁹⁰Y als Y₂O₃ und ¹⁴⁰Ba als BaCO₃. Die mittlere Rückgewinnung der zugesetzten Träger beträgt für Cer 95%, 85% für Caesium, 95% für Strontium, 95% für Yttrium und 65% für Barium. In Parallelbestimmungen mit Gehalten von einigen Ci/l, überschreiten die Abweichungen der Ergebnisse von den entsprechenden Mittelwerten im allgemein nicht 5%. Bei einer 30 l-Probe beträgt die untere Nachweisgrenze 0,005 Ci/l für ¹⁴⁴Ce, 0,006 Ci/l für ¹³⁷Cs, 0,005 Ci/l für ⁹⁰Sr und 0,006 Ci/l für ¹⁴⁰Ba.

     

Cp*MCpMoFe(CO)7(μ3-S), Cp*MoCpMFe(CO)7(μ3-S) (M = W,Mo) and Cp*WCp*MoFe(CO)7(μ3-S). Crystal structure of CpMoCp*WFe(CO)7(μ3-S)

CpMoFeCo(CO)₇(₃-S) reacts with Cp^*M(CO)₃Cl or CpM(CO)₃Cl (M=W, Mo) to gave the mixed-metal clusters Cp^*WCpMoFe(CO)₇(₃-S) (1), Cp^*MoCpMoFe(CO)₇(₃-S) (2), CpWCp^*MoFe(CO)₇(₃-S) (3), CpMoCp^*MoFe(CO)₇(₃-S) (4) and Cp^*WCp^*MoFe(CO)₇(₃-S) (5). The title clusters have been characterized by i.r., ¹H/¹³C-n.m.r. spectroscopy and their compositions have been confirmed by elemental analyses. The X-ray crystal structure analysis shows the two independent enantiomeric molecules of clusters (1) in one crystal structure unit.     

Addition of HCl to a Cluster-Bound Vinylidene Ligand: Preparation and Structure of Ru5(μ3-SMe)(μ3-CMe)(μ-Cl)(μ-SMe)(μ-PPh2)2(CO)9·PhMe

Addition of aqueous HCl to Ru₅( ₃-C=CH₂)(-SMe)₂(-PPh₂)₂(CO)₁₀ afforded the structurally characterized carbyne complex Ru₅( ₃-SMe)( ₃-CMe)(-Cl)(-SMe)(-PPh₂)₂(CO)₉, formed by addition of H to the vinylidene ligand; a Cl atom bridges an Ru–Ru bond.     

Chemical behaviour of helium muonide just after muon catalyzed fusion

Chemical behaviour of a helium muonide atom /He^o/ can be understood on the analogy of its hydrogen homologues, muonium /Mu/, deuterium /D^o/ and tritium /T^o/. In muon catalyzed fusion /CF/, a small fraction of negative muon in the fusion cycle sticks to helium to give proton-like He⁺ which easily picks up one electron forming He^o. The energy of He⁺ at birth is about 3.5 MeV being in a similar situation to the case of a hot tritium atom produced by /n, p/ or /n, / reaction. The reaction cross section and rate of He^o reactions are estimated.     

Nuclear interferences of uranium and thorium in a reactor neutron activation analysis determination of cerium using the radionuclides141Ce and143Ce

The interference contributions of uranium and thorium to the determination of cerium based on radionuclides¹⁴¹Ce and¹⁴³Ce produced by irradiation in a reactor core was determined. The values of the interference contributions for¹⁴¹Ce were 0.28±0.01 g Ce/g U and /2.01±0.05/x10^–3 g Ce/g Th, and for¹⁴³Ce 1.33±0.03 g Ce/g U and /9.0±0.2/x10^–3 g Ce/g Th.     

Gas-chromatographische Analyse von Kohlenwasserstoffen in der Au?enluft nach Probenahme mit dem Tieftemperaturgradientenrohr

Zusammenfassung Es wird über ein gas-chromatographisches Verfahren zur Bestimmung von Alkanen, Alkenen und Aromaten in der Außenluft berichtet, bei dem die Probenahme an Tenax GC oder Carbopack mit Hilfe eines Tieftemperaturgradientenrohres erfolgt und die Analyse unter Einsatz eines Doppelsäulensystems in Verbindung mit zwei Flammenionisationsdetektoren durchgeführt wird. Eingehende Untersuchungen zum Verhalten der Substanzen bei der Probenahme zeigen, daß die Trocknung der Probeluft mit Magnesiumperchlorat das Ergebnis nicht beeinflußt und für Kohlenwasserstoffe mit drei oder mehr C-Atomen keine auf Durchbruch zurückzuführenden Substanzverluste zu befürchten sind. Bei einem Probenahmevolumen von 51 Luft können 2 g Substanz/m³ gut bestimmt werden. Für Außenluft-Konzentrationen von 45 g Benzol/m³, 95 g Toluol/m³ und 35 g n-Pentan/m³ betrugen die Standardabweichungen 3,5, 6,0 bzw. 3,6 g/m³. Bei leichter Modifikation des Systems ist mit derselben Probenahmevorrichtung die gleichzeitige Bestimmung von Kohlenwasserstoffen mit einem Flammenionisationsdetektor und von Organohalogen Verbindungen mit einem Elektroneneinfangdetektor möglich.

---

Gas-chromatographic analysis of hydrocarbons in ambient air with cryogenic sampling

Summary A method is described for the gas-chromatographic determination of alkanes, alkenes and aromatics in ambient air. The hydrocarbons are trapped by cryogenic sampling using Tenax GC or Carbopack as adsorbing material and are analyzed in a two-column system equipped with two flame-ionization detectors. A detailed examination of the sampling procedure shows that drying the air with magnesium perchlorate does not affect the results, and losses of substances due to break-through need not be reckoned with for hydrocarbons with three and more carbon atoms. In a 51 air sample 2 g/m³ of hydrocarbons can be determined readily. The standard deviations for benzene, toluene and n-pentane were 3.5, 6.0 and 3.6 g/m³ at ambient air concentrations of 45, 95 and 35 g/m³. A slight modification of the system which includes the combined use of a flame-ionization detector and an electron-capture detector permits the simultaneous determination of hydrocarbons and halogenated hydrocarbons.

     

The determination of tin in explosive materials by thermal neutron activation analysis

A method, based on the measurement of the -photopeak at 332 keV arising from a¹²⁴Sn(n, )^125mSn reaction, has been developed for the rapid measurement of Sn at concentrations of 20 g g^–1, present as the cross-linking agent, in explosive charges. The method is comparative, and has a limit of detection of 0.6 g g^–1 and a precision of 5% RSD. The method requires no sample preparation and is economical in effort.     

Reactions of triosmium clusters Os3(CO)11(MeCN) and (μ-H)Os3(CO)10(μ-OH) withL-α-serine ethyl ester and ethanolamine

A series of novel chiral complexes with ,¹and ,² coordination of organic ligands were prepared by reactions of Os₃(CO)₁₁(MeCN) and (-H)Os₃(CO)₁₀(-OH) withL--serine ethyl ester and ethanolamine. The diastereomeric cluster complexes with serine ligands were separated by crystallization or chromatography. The structures of the compounds obtained were confirmed by¹H NMR and IR spectroscopy, mass-spectrometry, elemental analysis, and X-ray diffraction analysis.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 525–530, March, 1994.     

The oxidative addition of hydrogen sulfide to the electron-rich triple bond: The isolation and characterization of compounds that contain the Re2(μ-H)(μ-SH) cluster unit

The reactions of Re₂X₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) with H₂S in THF afford the dirhenium (III) complexes Re₂(-H)(-SH)X₄(-dppm)₂, the first examples of the oxidative addition of an S-H unit across an electron-rich metal-metal triple bond. The bromide complex Re₂(-H)(-SH)Br₄(-dppm)₂ (C₂H₅)₂O crystallizes in the space group P2₁/n witha=16.631(2) Å,b=15.967(3) Å,c=19.904(2) Å, =92.698(7)°,V=5279(2) ų, andZ=4. The structure which was refined toR=0.053 (R _w=0.070) for 4903 data withI>3.0(I), shows the presence of an edge-shared bioctahedral geometry with a very short Re-Re distance of 2.4566(7) Å. While the hydrogen atoms of the -H and -SH ligands were not located in the X-ray structure determination, their presence is confirmed by IR and¹H NMR spectroscopy.     

Equilibrium Particle Distribution in the Disperse System with Coagulation and Aggregate Disintegration

Kinetic equations were formulated, which describe coagulation–fragmentation process in a low concentrated suspension flow at a low shear rate. In such a system dispersed phase divided into fine and coarse fractions as the system is brought to equilibrium. Kinetic equations of two-fraction model were formulated. An approximate solution and, in one particular case, the exact solution of these equations were obtained for the equilibrium state. Detailed analysis of equilibrium particle distribution over the mass m was performed for an exponential coagulation kernel = ₀ m and an degenerated disintegration kernel = ₁₂, in which the disintegration frequency is an exponential function of aggregate mass ₁ = ₀ m ⁺ , and the probability of the fragment detachment from an aggregate is independent ofm and decreases exponentially with an increase in mass of a fragment: ₂ = ₀ ^–1exp(–/₀). The equilibrium distribution was shown to exist only at > 0, and in particular, it is described at = = 1 by the f() = ₀₀ ^–1exp(–/₀) and F(m) = Cx ^–1(x + 1)^{2 – 1} e ^–x functions for the particles of fine and coarse fractions (x = m/m ₀, = m ₀/₀, m ₀ and ₀ are the characteristic masses of coarse and fine fractions, respectively). The particle distribution for the fine fraction at 1 is well approximated by the Gaussian distribution exp[–(m – m ₀)²/(4^–1 m ₀₀)].     

Reactions of the Ru3(CO)10(μ-Ph2PCH2PPh2) cluster with enynes RCH=CHC≡CR (R is phenyl or ferrocenyl). Formation of indenone derivatives of triruthenium clusters

The thermal reaction of Ru₃(CO)₁₀(-Ph₂PCH₂PPh₂) (1) with enyne PhCH=CHCCPh afforded the trinuclear ruthenium clusters Ru₃(CO)₆{₃-P(Ph)CH₂PPh₂}{₃-C(Ph)=CHCC(Ph)(1,2-C₆H₄)C(=0)} (2), Ru₃(-H)(CO)₅{₃-P(Ph)CH₂PPh₂}{₃-C(Ph)=CHCC(Ph)(1,2-C₆H₄)C(—0)} (3), and Ru₃(CO)₆(-CO){₃-P(Ph)CH₂PPh₂}{₃-C(C=CPh₂)CH=C(H)Ph} (4) and also two isomers of Ru₃(CO)₅(-CO)(-Ph₂PCH₂PPh₂){₃-C₄Ph₂(CH=CHPh)₂} (5a and 5b). Clusters 2, 3, and 4 were characterized by IR spectroscopy, ¹H and ³¹P NMR spectroscopy, and X-ray diffraction analysis. The reaction of complex 1 with enyne FcCH=CHCCFc gave rise to the Ru₃(CO)₆{₃-P(Ph)CH₂PPh₂}{₃-C(Fc)=CHCC(Fc)(1,2-C₆H₄)C(=0)} (6) and Ru₃(-H)(CO)₅{₃-P(Ph)CH₂PPh₂}{₃-C(Fc)=CHCC(Fc)(1,2-C₆H₄)C(—0)} (7) clusters. According to the spectral data, the latter compounds are isostructural to complexes 2 and 3, respectively.     

Characterization of airborne particulates by laser microprobe mass analysis

Summary Laser microprobe mass analysis (LAMMA) was applied to characterize aerosol particles collected and separated from 16m to 0.06m by a low pressure cascade impactor. Positive ion LAMMA spectra showed characteristic molecular peaks such as PbCl⁺, a series of Si₂O⁺–Si₂O₄ ⁺ and NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, and TiO⁺ in 0.06–0.12m, 0.5–1m and 4–8m fraction, respectively. In the negative ion LAMMA spectra, it was observed that the fragment peaks of sulfate ions were deficient above 2m and those of nitrate ions were deficient under 2m. LAMMA allows remarkable insights into the chemical nature of aerosol particles.

---

Charakterisierung luftgetragener Teilchen durch Laser-Microprobe-Massenspektrometrie

Zusammenfassung Laser-Microprobe-Spektrometrie (LAMMS) wurde zur Analyse atmosphärischen Aerosols herangezogen, welches im Korngrößenbereich zwischen 16m und 0.06m mit einem Niederdruckkaskadenimpaktor fraktioniert gesammelt wurde. Positive LAMMS-Spektren zeigten charakteristische molekulare Peaks, wie etwa PbCl⁺, eine Serie von Si₂O⁺–Si₂O₄ ⁺ und NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, sowie TiO⁺ in der 0,06–0,12-m,- 0,5–1–m- bzw. 4–8-m-Fraktion. In den negativen LAMMS-Spektren konnten über 2m keine Fragmentpeaks für Sulfationen, unter 2m. keine für Nitrationen beobachtet werden. LAMMS ermöglicht eine bemerkenswerte Einsicht in die chemische Natur von Aerosolteilchen.

     

Solvatochromism of Heteroaromatic Compounds: XIX. Factors Affecting Quantitative Characteristics of Solvatochromism in Aprotic Inert Media

The effects of aprotic inert media on the electronic absorption spectra of aromatic nitro compounds p-NO₂C₆H₄R were used as evidence for the linear correlation between the slope s _a of the solvatochromism equations _max = ₀ + s _a^* and the dipole moments of the molecules in their ground electronic state _g. A linear correlation was established between 0 and the first ionization potential of subunits C₆H₅R. A new approach to estimating the dipole moment of electronically excited molecules (_e) for molecules like p-NO₂C₆H₄R on the basis of the correlation _e = r_g was proposed.     

Effect of Surfactants on the Immobilization of 4-(2-Pyridylazo)resorcinol on Silochroms

The effect of cationic surfactants (cetyltrimethylammonium bromide, cetylpyridinium bromide, and tetrabutylammonium perchlorate) and a nonionic surfactant (OP-7) on the conditions of the immobilization of 4-(2-pyridylazo)resorcinol (PAR) on three types of silica gel (Silochrom S-120 (200–350 m), Silochrom S-120 (315–500 m), and Silochrom S-80 (200–350 m)) was studied. It was found that OP-7 does not affect the adsorption of surfactants. The effect of cationic surfactants increases in the order tetrabutylammonium perchlorate < cetyltrimethylammonium bromide < cetylpyridinium bromide. The adsorption activity of silica gels increases in the order Silochrom S-120 (315–500 m) < Silochrom S-80 (200–350 m) < Silochrom S-120 (200–350 m). Cetylpyridinium bromide provides full immobilization of PAR on silica gel Silochrom S-120 (200–350 m) in the pH range 2–9.