凹土-辣根过氧化物酶复合材料制备及其细胞过氧化氢检测

将辣根过氧化物酶(HRP)固定到凹凸棒石粘土(Attapulgite,简称凹土)表面,制得HRP-凹土纳米复合物(HRP-Attapulgite),并采用电化学阻抗、紫外光谱和红外光谱技术表征了HRP固定化过程.HRP-Attapulgite电化学性质测试表明,凹土能促进HRP的直接电子转移,其循环伏安曲线有一对良好的氧化还原峰,峰电位分别为Epc=-370 mV,Epa=-300 mV,式量电位E0′=-335 mV.凹土表面HRP的H2O2响应电流与浓度(0.3~75μmol·L-1)呈线性关系.该电极可用于巨噬细胞中微量H2O2的测定.     

锗钨酸盐的电化学性能及GeW11Co/P-oPD/GC电极对过氧化氢的电催化还原

研究了杂多酸-钴取代三聚Keggin结构锗钨酸盐（[Co（H2O）3（α-GeW11CoO38）3]10-）的电化学性能.实验表明,在玻碳（GC）电极上,锗钨酸盐循环伏安曲线呈现2对可逆的氧化还原峰,峰电位差分别为31 mV和35 mV,各对应于2电子4质子和2电子3质子电极反应,其过程受表面吸附控制.经过电聚合将Ge...     

碳纳米管促进氧化还原蛋白质和酶的直接电子转移

将血红蛋白(Hb)、辣根过氧化物酶(HRP)和葡萄糖氧化酶(GOx)分别固定在经碳纳米管修饰的玻碳电极(CNT/GC)上,制成Hb CNT/GC、HRP CNT/GC和GOx CNT/GC电极.Hb、HRP和GOx在CNT/GC电极表面均能发生有效和稳定的直接电子转移反应,其相应的循环伏安曲线均显示出一对几近对称的氧化还原峰;在60mV/s下,其式量电位E0'分别为-0.343V、-0.319V和-0.456V(vs.SCE,pH6.9),且不随扫速而变;以上三者在CNT/GC电极表面直接电子转移的表观速率常数ks依次为1.25±0.25、2.07±0.56和1.74±0.42s-1;根据式量电位E0'随缓冲溶液pH值的变化关系,确知在CNT/GC电极上,Hb或HRP发生的直接电化学遵从(1e+1H+)电极过程机理,而GOx发生的直接电化学反应则遵从(2e+2H+)机理.此外,固定在CNT/GC电极表面的Hb、HRP和GOx也同时表现出对各自底物的生物电催化活性.由本文制备的碳纳米管修饰电极及其固定生物蛋白质(酶)的方法具有简单、易于操作等优点,并可用于对其它生物氧化还原蛋白质和酶的直接电子转移测试.     

血红蛋白和SiO2凝胶层层组装膜在碳纳米管/金纳米粒子修饰电极界面上的直接电化学及电催化研究

以SiO2凝胶膜和蛋白质交互组装法固定血红蛋白(Hb), 对其进行了电化学和电催化研究. 首先制备碳纳米管/金纳米粒子复合材料修饰的MWNTs-Au/GC电极, 为防止蛋白质在电极表面流失, 将Hb和自制的SiO2凝胶膜交替滴涂到电极表面, 得到SiO2/Hb层层组装膜修饰电极, 即{SiO2/Hb}n/MWNTs-Au/GC电极, n=2为优化层数. Hb在{SiO2/Hb}2/MWNTs-Au/GC电极上仍能保持其特有的生物活性, 并能与电极进行稳定快速的电子直接转移, 同时表现出过氧化物酶特性, 对H2O2具有良好的生物电催化还原能力.     

辣根过氧化物酶活性膜结构及生物电催化性能

通过分子沉积法研究了在聚对苯二甲酸乙二醇酯（PET）表面及金电极表面组装辣根过氧化物酶（HRP）/聚对苯乙烯磺酸钠（PSS）多层生物活性膜，用原子力显微镜(AFM)研究了组装膜的表面形貌，并研究了组装膜的形貌、粗糙度和活性关系.应用循环伏安法（CV）研究了组装HRP膜后电极对H2O2的电化学催化还原作用.实验发现，采用亚甲基蓝（MB）溶液为介质，在H2O2浓度为0.2～5.0 mmol•L－1时，其响应电流对H2O2浓度变化基本呈线性.     

金复合介孔SBA-15吸附血红蛋白在H2O2电催化反应中的应用

以P123嵌段共聚物表面活性剂为模板剂制备介孔氧化硅SBA-15,并用沉积-沉淀(DP)法在SBA-15介孔表面负载纳米Au颗粒制备得到金复合介孔SBA-15材料(Au-SBA-15).再以Au-SBA-15材料制备玻碳修饰电极,将血红蛋白固定于修饰电极上用循环伏安法考察其对不同浓度H2O2溶液的电催化反应.在固定了血红蛋白的Hb/Au-SBA-15/GC修饰电极上,H2O2在+0.95 V处出现了氧化峰,且随着H2O2浓度的增大峰电流不断增加,说明金复合介孔氧化硅材料具有良好的生物兼容性,有利于血红蛋白的固定,其修饰电极对H2O2溶液具有一定的电催化作用.     

磁性纳米微球-血红蛋白修饰电极的电化学行为及对H2O2电催化还原的研究

将天然高分子壳聚糖(CS)包裹碳包铁的磁性纳米微球(CFN/CS)修饰于玻碳电极表面,并利用戊二醛将血红蛋白(Hb)交联在CFN/CS上,制备了Hb-CFN/CS-GC电极。循环伏安法和电化学交流阻抗法实验结果表明,Hb在CFN/CS-GC电极表面仍保持较好的生物活性,能稳定有效地进行直接电子转移反应。电化学研究表明该修饰电极对H2O2有良好的电催化还原作用,在pH 7.0的磷酸盐(PBS)介质中,H2O2在5.2×10-5~2.3×10-3mol/L浓度范围内,其浓度与还原峰电流呈良好线性关系,检出限为8.7×10-6mol/L。该修饰电极有着良好的重现性和稳定性。     

血红蛋白在二维纳米金Langmuir—Blodgett单层膜修饰电极上的直接电化学

利用Langmuir-Blodgett(LB)技术在氧化铟锡(ITO)电极上制备了分散均匀的二维纳米金单层膜,并将血红蛋白(Hb)直接固定于该修饰电极表面,研究了Hb在电极上的直接电化学行为.实验结果表明:纳米金可以改善Hb和电极间的直接电子传递,提高电子传递效率.Hb/Nano-Au修饰电极在pH 5.0～9.0范围内的式电位与溶液pH呈线性关系,斜率为-57 mV/pH,说明Hb的电子传递过程伴随质子转移;该修饰电极对H2O2具有良好的催化作用,在0.1 mol/L pH 7.0 的磷酸盐缓冲溶液(PBS)中,H2O2在2.5×10-6～4.1×10-4 mol/L浓度范围内与响应电流呈良好的线性关系,检出限为6.2×10-7 mol/L;其异相电子转移速率常数为0.66 s-1,米氏常数为0.20 mmol/L.     

微过氧化物酶-11在壳聚糖修饰玻碳电极上的电化学

采用物理吸附法, 将微过氧化物酶-11(MP-11)固定在载体壳聚糖修饰的玻碳电极表面. 运用循环伏安法对MP-11在该修饰电极上的直接电化学行为及对氧(O2)和过氧化氢(H2O2)的电催化行为进行了表征. 研究结果表明, 在pH=7.12的磷酸盐缓冲溶液中, 壳聚糖修饰电极上的MP-11发生了准可逆的氧化还原反应, 而且在反应过程中包含质子的传递过程, 完全实现了MP-11在该修饰电极上的直接电化学. 该修饰电极也可以对O2和H2O2进行电催化还原, 并且两个反应的电催化还原过程都是受表面控制的电化学过程, 对H2O2催化还原产生的响应电流与H2O2的浓度呈线性关系.     

铁氰化钆修饰电极的制备及表征

应用电化学循环扫描法于玻碳电极表面沉积并形成铁氰化钆修饰电极(GdHCF/GC),扫描电镜(SEM)显示,有两种大小和外形明显不同的颗粒状GdHCF附着在电极表面.红外光谱表明,GdCHF的C≡N弯曲振动吸收峰出现在2062.5 cm-1处.循环伏安法测试表明,在0.2 mol/L NaC l溶液中,GdHCF/GC电极出现两对氧化还原峰,扫速为20 mV/s时,其氧化还原峰的式量电位分别为E0’(I)=192.5 mV和E0’(II)=338.5 mV.研究了不同支持电解质对GdHCF/GC电极电化学性能的影响,GdHCF对Na+离子有优先选择性.     

Direct electron transfer and bioelectrocatalysis of hemoglobin on nano-structural attapulgite clay-modified glassy carbon electrode

Direct electrochemistry of hemoglobin (Hb) on natural nano-structural attapulgite clay film-modified glassy carbon (GC) electrode was investigated. The interaction between Hb and attapulgite was examined using UV-vis, FTIR spectroscopy, and electrochemical methods. The immobilized Hb displayed a couple of well-defined and quasi-reversible redox peaks with the formal potential (E(0')) of about -0.366 V (versus SCE) in 0.1 M phosphate buffer solution of pH 7.0. The current was linearly dependent on the scan rate, indicating that the direct electrochemistry of Hb in that case was a surface-controlled electrode process. The formal potential changed linearly from pH 5.0 to 9.0 with a slope value of -48.2 mV/pH, which suggested that a proton transfer was accompanied with each electron transfer in the electrochemical reaction. The immobilized Hb exhibited excellent electrocatalytic activity for the reduction of hydrogen peroxide without the aid of an electron mediator. The electrocatalytic response showed a linear dependence on the H(2)O(2) concentration ranging from 5.4 x 10(-6) to 4.0 x 10(-4) M with the detection of 2.4 x 10(-6) M at a signal-to-noise ratio of 3. The apparent Michaelis-Menten constant K(M)(app) for the H(2)O(2) sensor was estimated to be 490 microM, showing a high affinity.     

碳糊电极上无机膜固载血红蛋白的直接电化学

报道了用硅溶胶-凝胶(Sol-gel)膜将血红蛋白(Hb)固载于碳糊电极上的直接电化学行为.研究结果表明,Hb-Sol-gel修饰的碳糊电极在pH=7.0的缓冲溶液中于-0.275V(vs.Ag/AgCl)处有一对可逆的循环伏安氧化-还原峰,为Hb血红素辅基Fe(Ⅲ)/Fe(Ⅱ)电对的特征峰.HbFe(Ⅲ)/Fe(Ⅱ)电对的式量电位在pH5.0～11.0范围内与溶液pH值呈线性关系,表明Hb的电化学还原很可能是一个质子伴随着一个电子的电极过程.FTIR光谱证实,Sol-gel膜对Hb的固载没有破坏其天然结构.Hb-Sol-gel修饰的碳糊电极能够催化还原H₂O₂,可望将其用于制作第三代生物传感器.     

Direct electrochemistry and bioelectrocatalysis of hemoglobin immobilized on carbon black

It is reported for the first time that hemoglobin (Hb) was immobilized on the surface of carbon black powders modified at the surface of a glassy carbon electrode. The cyclic voltammetric results showed that the immobilized Hb could undergo a direct quasi-reversible electrochemical reaction. Its formal potential, E(0), is -0.330 V in phosphate buffer solution (pH 6.9) at a scan rate of 100 mV/s and is almost independent of the scan rate in the range of 40-200 mV/s. The dependence of E(0), on the pH of the buffer solution indicated that the conversion of Hb-Fe(III)/Hb-Fe(II) is a one-electron-transfer reaction process coupled with one-proton-transfer. The experimental results also demonstrated that the immobilized Hb retained its bioelectrocatalytic activity for the reduction of H(2)O(2). Furthermore, the immobilized Hb can be stored at 4 degrees C for several weeks without any loss of the enzyme activity. Thus, the immobilized Hb may be used as a biocathodic catalyst in biofuel cells.     

Electrochemical detection of extracellular hydrogen peroxide released from RAW 264.7 murine macrophage cells based on horseradish peroxidase-hydroxyapatite nanohybrids

A new method developed for the reliable determination of extracellular and intracellular H(2)O(2) is very useful for gaining a full understanding of the role that H(2)O(2) plays in pathology and physiology, and the relationship between H(2)O(2) and environmental stresses and lipid peroxidation. This work developed and validated an electrochemical approach for the determination of extracellular H(2)O(2) released from RAW 264.7 murine macrophage cells. This approach is based on the electrocatalytic reduction of the released H(2)O(2) at the biosensor of HRP-HAP/GC, which was fabricated by depositing the horseradish peroxidase-hydroxyapatite (HRP-HAP) nanohybrids on a glassy carbon (GC, 3 mm in diameter) electrode. The biosensor exhibited a rapid response (less than 2 s), a low detection limit (0.1±0.02 μM), a wide linear range (5 μM to 0.82 mM), as well as good stability and repeatability. In addition, the common interfering species, such as uric acid (UA), ascorbic acid (AA), glucose, and 3,4-dihydroxyphenylacetic acid (DOPAC), etc., did not cause any interference due to the use of a low operating potential (-400 mV, versus SCE). Therefore, this work has demonstrated a simple and effective sensing platform for the detection of extracellular H(2)O(2) released from cells such as RAW 264.7 cells, which has potential utility to bioelectroanalytical chemistry, cellular biology, and pathophysiology.     

Electrochemistry and electrocatalysis of hemoglobin in Nafion/nano-CaCO3 film on a new ionic liquid BPPF6 modified carbon paste electrode

Room temperature ionic liquid N-butylpyridinium hexafluorophosphate (BPPF6) was used as a binder to construct a new carbon ionic liquid electrode (CILE), which exhibited enhanced electrochemical behavior as compared with the traditional carbon paste electrode with paraffin. By using the CILE as the basal electrode, hemoglobin (Hb) was immobilized on the surface of the CILE with nano-CaCO3 and Nafion film step by step. The Hb molecule in the film kept its native structure and showed good electrochemical behavior. In pH 7.0 Britton-Robinson (B-R) buffer solution, a pair of well-defined, quasi-reversible cyclic voltammetric peaks appeared with cathodic and anodic peak potentials located at -0.444 and -0.285 V (vs SCE), respectively, and the formal potential (E degrees') was at -0.365 V, which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The formal potential of Hb shifted linearly to the increase of buffer pH with a slope of -50.6 mV pH-1, indicating that one electron transferred was accompanied with one proton transportation. Ultraviolet-visible (UV-vis) and Fourier transform infrared (FT-IR) spectroscopy studies showed that Hb immobilized in the Nafion/nano-CaCO3 film still remained its native arrangement. The Hb modified electrode showed an excellent electrocatalytic behavior to the reduction of H2O2, trichloroacetic acid (TCA), and NaNO2.     

Studies on direct electron transfer and biocatalytic properties of hemoglobin in polyacrylonitrile matrix

The direct electrochemistry of hemoglobin (Hb) immobilized in polyacrylonitrile (PAN) modified glassy carbon electrode was described. The protein-PAN film exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks for Hb Fe(III)/Fe(II) redox couple in a pH 7.0 phosphate buffer. The formal potential of Hb heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 5.0-9.0 with a slope of 54 mV pH(-1), which implied that a proton transfer was accompanied with each electron transfer in the electrochemical reaction. Position of Soret absorption band of Hb-PAN film suggested that the Hb kept its secondary structure similar to its native state in the PAN matrix. The Hb in PAN matrix acted as a biologic catalyst to catalyze the reduction of hydrogen peroxide. The electrocatalytic response showed a linear dependence on the H(2)O(2) concentration ranging from 8.3 x 10(-6) to 5 x 10(-4) mol L(-1) with a detection limit of 8.3 x 10(-6) mol L(-1) at 3 sigma. The apparent Michaelis-Menten constant K(M)(app) for H(2)O(2) sensor was estimated to be 0.9 mmol L(-1).     

血红蛋白在壳聚糖修饰碳纳米管上的电化学特性及对过氧化氢的电催化分析

用壳聚糖对多壁碳纳米管进行修饰,构建了一种用于固定血红蛋白的新型复合材料,并研究了血红蛋白在该碳纳米管上的电化学性质及其对过氧化氢的电催化活性.扫描电镜结果表明,壳聚糖修饰的多壁碳纳米管呈单一的纳米管状,并能均匀分散在玻碳电极表面.紫外光谱分析表明血红蛋白在该复合膜内能很好地保持其原有的二级结构.将该材料固定在玻碳电极上后,血红蛋白能成功地实现其直接电化学.根据峰电位差随着扫描的变化,计算得到血红蛋白在壳聚糖修饰的碳纳米管膜上的电荷转移系数为0.57,表观电子转移速率常数为7.02 s-1.同时,该电极对过氧化氢显示出良好的催化性能,电流响应信号与H2O2浓度在1.0×10-6 ～1.5×10-3 mol/L间呈线性关系,检出限为5.0×10-7 mol/L.修饰电极显示了良好的稳定性.     

Direct Electrochemistry of Hemoglobin Immobilized in Sodium Alginate Film on the Ionic Liquid [BMIM]PF6 Modified Carbon Paste Electrode

In recent years the direct electron transfer of redox protein on electrode surface has attracted great attentions1. Different kind of modified electrode and various supporting films for immobilization of proteins had been proposed. But most of them are ba…     

Direct electrochemistry and electrocatalysis of myoglobin in dodecyltrimethylammonium bromide film modified carbon ceramic electrode

Direct electrochemistry and electrocatalysis of myoglobin（Mb） were studied with Mb immobilized on dodecyltrimethylammonium bromide（DTAB） film modified carbon ceramic（CC） electrode.Cyclic voltammetry showed a pair of well-defined and nearly reversible redox peaks of Mb（Fe^Ⅱ/Fe^Ⅲ） at about—0.3 V vs.SCE（pH = 6.98）.The currents of the redox peak were linear to scan rate,and rate constant（Ks） was estimated to be 3.03 s^-1.The formal potential（E°’） of Mb in the DTAB/CC electrodes shifted linearly with pH with a slope of -36.44 mV/pH,implying that the electron transfer between DTAB and CC electrodes is accompanied by proton transportation.The immobilized Mb exhibited excellent electrocatalytic response to the reduction of hydrogen peroxide（H₂O₂）.     

溶胶-凝胶血红蛋白电化学传感器的研制

运用溶胶-凝胶技术将血红蛋白(Hb)固载于玻碳电极(GC)表面,制得Hb/Sol-Gel/GC修饰电极,找出了制备Hb/Sol-Gel/GC修饰电极的最佳实验条件,建立了一种测定过氧化氢的新的、灵敏的方法.同时对该电极与过氧化氢的作用机理进行了探讨.