胶粉/热塑性塑料共混材料的研究

以胶粉及通用塑料PP和LLDPE为原料,研究了原料种类、相容剂等对胶粉/热塑性塑料共混材料性能的影响,制得了性能较好的共混材料。通过热分析和扫描电镜对制得的共混材料进行分析表征,表明胶粉和LLDPE有较好的相容性及较强的结合力。     

线形低密度聚乙烯／废胶粉热塑弹性体动态硫化性能研究

利用动态硫化法制备了线形低密度聚乙烯(LLDPE)/废胶粉(GTR)热塑弹性体。重点研究了两种交联剂:硫和过氧化二异丙苯(DCP)对共混物性能的影响。加入一定量的苯乙烯-丁二烯-苯乙烯(SBS)共聚物作为增容剂。结果表明,经过DCP动态硫化后的共混物的力学性能比简单共混的共混物有明显的提高,而加入硫磺体系对共混物力学性能影响不大甚至有所下降。通过红外光谱、热分析(DSC)和扫描电镜(SEM)对共混物的热行为和表面形态研究表明,加入DCP交联剂使LLDPE、SBS和胶粉之间发生了交联反应,从而增加了胶粉颗粒与LLDPE间的界面相容性,使其热塑性弹性体的力学性能得以提高。     

LLDPE/纳米SiO_2复合材料的力学性能和光学性能研究

采用熔融共混方法制备了LLDPE 纳米SiO2 复合材料 ,并对该体系的力学性能和光学性能进行了系统研究 .结果表明 ,随着纳米SiO2 的加入 ,复合材料的弹性模量显著提高 ,冲击强度与拉伸强度呈峰形变化 ,且均在SiO2 含量为 3phr左右达到最大值 .加入少量的纳米SiO2 后 ,复合材料薄膜对长波红外线 (7～ 1 1 μm)的吸收能力较LLDPE膜有了显著提高 ,透光率略有下降但雾度提高 ,透光质量得到改善 .同时表明 ,纳米SiO2 的表面处理方法对膜的光学性能有显著影响     

载体茂金属用于原位聚合反应制备LLDPE研究

以Ti(OR) 4为二聚催化剂 ,以载体茂金属催化剂为共聚合催化剂 ,以烷基铝为唯一助催化剂 ,在乙烯为聚合单体的条件下原位聚合制备LLDPE ,成功地解决了两种催化剂之间的相互干扰的问题 ,该催化剂体系具有聚合活性高 ,所得聚合物密度低 ,聚合物形态可调节等优点     

(2-Me-3-ClPh)_2PBIMe_2FeCl_2racC_2H_4(Ind)_2ZrCl_2/MAO双功能催化体系乙烯原位共聚制备LLDPE

合成了后过渡金属铁 (2 Me 3 ClPh) 2 PBIMe2 FeCl2 低聚催化剂 ,并与亚乙基桥茂金属共聚催化剂rac C2 H4 (Ind) 2 ZrCl2 共用 ,用MAO(1 4mol L甲苯溶液 )作为助催化剂 ,原位共聚合成线性低密度聚乙烯 (LLDPE) .结果发现 ,这种后过渡铁催化剂具有很高的低聚催化活性 [1 0× 10 7goligomer (molFe·h) ],双功能催化体系的催化活性保持在 10 6 gPE (molFe·h)以上 ;1 3C NMR分析表明 ,得到了线性低密度聚乙烯 ,当Fe Zr比为 1 2时 ,也没有出现α 烯烃残留现象 ,说明这两种催化剂具有好的匹配性 ;随Fe Zr比和反应温度的变化 ,聚合物的熔点、结晶度、熔点等均表现出很好的规律性 .     

工艺条件对 LLDPE/POE/CaCO3微孔膜的孔结构及防水透湿性能的影响

用拉伸致孔法制备了 LLDPE/POE/CaCO3防水透湿微孔膜,研究了拉伸倍数及体系组成对微孔膜的微孔结构及防水透湿性能的影响.用 SEM 对微孔膜的微孔结构进行考察,用压汞法对微孔膜的孔径及其分布和微孔的孔隙率进行研究.用静水压法及正杯法分别研究了微孔膜的防水和透湿性能.结果表明:拉伸倍数及 CaCO3用量对微孔膜的孔径、孔隙率及防水透湿性能有明显影响.     

Researches on the In Situ Copolymerization of Ethylene with Catalysts Immobilized onto the Molecular Sieves

In this paper,the bi-functional catalyst system composed of molecular sieve(MCM-41) immobilized oligomerization catalyst(C25H17Cl2N3·FeCl2) and copolymerization catalyst(Et(Ind)2ZrCl2) was employed in the in situ copolymerization of ethylene aiming to prepare the Linear low density polyethylene(LLDPE).In this paper,we mainly argued the regular pattern of the in situ copolymerization of ethylene in limited nano-space and compared it with that happening in free space.The impact of variance of the reaction temperature,Fe/Zr value and the A1/(Fe+Zr) value on the activity of the in situ copolymerization of ethylene has also been introduced.Furthermore,the degree of branching,thermal properties and crystalline changes of the obtained polymerization products prepared from different reactivity were investigated.     

桥联茂金属催化剂用于双功能催化体系制备LLDPE的研究

以四种取代基不同的桥联茂金属作为乙烯共聚催化剂 ,以Ti(OR) 4为二聚催化剂组成双功能原位聚合催化剂体系 ,在同一反应釜中 ,乙烯为唯一聚合单体 ,以阳离子助剂B(C6 F5 ) 3为唯一助催化剂 ,原位制备LLDPE .该聚合体系催化剂活性高、单体插入率高、得到的聚合物为熔点低、分子量可调的超低密聚乙烯     

LLDPE/IPP共混物高取向薄膜的附生结晶

本文用透射电子显微术、电子衍射等方法研究了线性低密度聚乙烯(LLDPE)和等规聚丙烯(IPP)共混物高取向薄膜的形态结构.在熔体拉伸薄膜中统组分的LLDPE与IPP均以高取向的片晶形式存在,片晶生长方向垂直手拉伸方向.当共混物中LLDPE含量较低(小于40％)时,作为分散相的LLDPE在IPP上附生结晶.两种片晶的c轴成45°交角,附生结晶的接触面为LLDPE的(100)和IPP的(010).而在LLDPE含量大于50％时,LLDPE形成独立的相区,则不存在附生结晶现象,结果两种片晶的生长方向均垂直于拉伸方向.在135℃热处理15min,然后自然冷却的LLDPE/IPP共混物薄膜中,当LLDPE含量≤50％时,LLDPE仍然在IPP上附生生长,二者的结构关系与热处理前的相同.     

ma-异氰酸酯改性app及其在lldpe中耐水性的评价

依次用密胺(MA)、2,4-甲苯二异氰酸酯(TDI)对聚磷酸铵(APP)进行改性,并分别应用于低密度线性聚乙烯(LLDPE)中。分别用APP在水中的溶解度变化,APP处理的LLDPE水浸后的极限氧指数(LOI)变化和磷含量变化评价了APP的耐水性。结果发现,改性后的APP在水中的溶解度减小,未改性APP的溶解度是0.368 0,MA-TDI-APP是0.212 3,减小了42.3%。改性后APP处理的LLDPE水浸后的LOI变化量减小,添加量均为30%时,未改性APP处理的LLDPE的LOI值降低了5.3%,AM-TDI-APP处理的LLDPE的LOI值降低了2.5%。改性后APP处理的LLDPE水浸后磷含量损失降低,不同APP添加量的LLDPE,未改性APP处理的磷含量损失均在6.5%以上,MA-TDI-APP处理的磷含量损失在4%以下。用扫描电子显微镜观察了改性前后APP与LLDPE的相容性,改性后的APP与LLDPE的相容性较好,MA-TDI改性的APP与LLDPE的相容性最好。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.