Extraction of thorium(IV) and europium(III) by a phosphorylated calix[4]arene in dichloromethane

Summary The extractive properties of 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(diphenylphosphinoylmethoxy)calix[4]arene towards thorium(IV) and europium(III) ions are studied. The conventional log-log analysis of the extraction data reveals that the stoichiometry of the extracted species is 1 : 1 metal ion to ligand ratio for the two metals. The effects of ligand concentration, types of diluent and concentration of the salting-out agents are investigated and discussed. The selectivity of the ligand for thorium and europium ions versus Mn²⁺, Pb²⁺, Cd²⁺, Fe²⁺, Ni²⁺ and Co²⁺ is examined.     

Complex Formation of 1,10-Dibenzyl-1,10-diaza-18-crown-6 with Ni2+, Cu2+, Ag+ and Cd2+ Metal Cations in Acetonitrile–dimethylformamide Binary Solutions

Conductance measurements are reported for nickel(II), cupper(II), silver(I) and cadmium(II), salts in acetonitrile (AN)–dimethylformamide (DMF) binary solvents containing macrocyclic ligand, 1,10-dibenzyl-1,10-diaza-18-crown-6 (DBDA18C6) at different temperatures. The changes in molar conductance caused by addition of DBDA18C6 to solutions were analyzed by non-linear least squares to give stability constants of 1:1 metal cation–DBDA18C6 complexes. The results show that the stabilities of the complexes are sensitive to solvent composition and in some cases the sequence of stabilities is changed with changing the composition of the mixed solvents. The values of thermodynamic quantities (ΔH°c and ΔS°c) for formation of DBDA18C6-Ni²⁺, DBDA18C6-Cu²⁺, DBDA18C6-Ag⁺ and DBDA18C6-Cd²⁺ complexes were obtained from temperature dependence of the stability constants and the results show that the values of ΔH°c and ΔS°c for these complexes are sensitive to the nature and composition of AN–DMF binary solutions, but they do not vary monotonically with the solvent composition.     

Adsorption and thermodynamic behavior of uranium on natural zeolite

Adsorptive behavior of natural clinoptilolite-rich zeolite from Balikesir deposites in Turkey was assessed for the removal of uranium from aqueous solutions. The uranium uptake and cation exchange capacities of zeolite were determined. The effect of initial uranium concentrations in solution was studied in detail at the optimum conditions determined before (pH 2.0, contact time: 60 minutes, temperature: 20 °C). The uptake equilibrium is best described by Langmuir adsorption isotherm. Some thermodynamic parameters (ΔH°, ΔS°, ΔG°) of the adsorption system were also determined. Application to fixation of uranium to zeolite was performed. The uptake of uranium complex on zeolite followed Langmuir adsorption isotherm for the initial concentration (25 to 100 μg/ml). Thermodynamic values of ΔG°, ΔS° and ΔH° found show the spontaneous and exothermic nature of the process of uranium ions uptake by natural zeolite. This revised version was published online in August 2006 with corrections to the Cover Date.     

Lower-RIM Polyphosphorylated Calix[4]arenes. Their Use as Extracting Agents for Thorium (IV) and Europium (III) Ions

The extraction of thorium (IV) and europium (III) ions from aqueous nitrate media (1 M nitric acid and sodium nitrate) using six p-tert -butylcalix[4]arene derivatives bearing phosphine oxide units (--CH 2 P(O)Ph 2 ) anchored at the lower rim has been investigated at 25°;C. All ligands display higher extracting properties toward thorium than europium ions. The number and position on the lower rim of the ligating groups play a crucial role in the extraction process, the highest extraction percentages being in each case achieved with the tetra-phosphorylated calixarene. In the presence of sodium nitrate the extraction percentages are considerably higher than those obtained in the presence of nitric acid.     

Solvent extraction of cobalt(II), zinc(II) and europium(III) with 4-thiobenzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-one (SBMPP)

Solvent extraction of⁶⁵zinc,⁶⁰cobalt and^152+154europium from aqueous buffers into benzene containing 4-thiobenzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-one (SBMPP) has been investigated in detail (μ=0.1, T=26±1°C). The species extracted and the values of log K_ex, where K_ex refers to the extraction equilibrium, are ZnL₂ (−2.68) CoL₂(−3.08) and EuL₃(−7.08), where L is the anion of the ligand. The sulfur analog appears to be more effective than the parent ligand 4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-one in the extraction of zinc(II) and cobalt(II), whereas the reverse is true with europium(III).     

Removal of Th(IV) ions from aqueous solution using bi-functionalized algae-yeast biosorbent

Composites could be more effective adsorbents than inorganic and organic components individually. In the present study, the red macro marine algae, Jania Rubens and yeast, Saccharomyces cerevisiae immobilized on silica gel were used as a constituent of bi-functionalized biosorbent to remove thorium ions from aqueous solution. Optimum biosorption conditions were determined as a function of pH, initial Th(IV) concentration, contact time, temperature, volume/mass ratio and co-ion effect. The morphological analysis of the biocomposite was performed by the scanning electron microscopy and functional groups in the biosorbent were determined by FT-IR spectroscopy. In order to find the adsorption characteristics, Langmuir, Freundlich, and Dubinin–Radushkevich adsorption isotherms were applied to the adsorption data. The data were well described by Langmuir adsorption isotherms while the fit of Freundlich adsorption isotherms and Dubinin–Radushkevich equation to adsorption data was poor. Using the equilibrium constant value obtained at different temperature, the thermodynamics properties of the biosorption (ΔG°, ΔH° and ΔS°) were also determined. The results show that biosorption of Th(IV) ions onto biocomposite was exothermic nature, spontaneous and more favorable at lower temperature under examined conditions.     

Adsorption of uranium ions by crosslinked polyester resin functionalized with acrylic acid from aqueous solutions

In this paper, the crosslinked polyester resin containing acrylic acid functional groups was used for the adsorption of uranium ions from aqueous solutions. For this purpose, the crosslinked polyester resin of unsaturated polyester in styrene monomer (Polipol 353, Poliya) and acrylic acid as weight percentage at 80 and 20%, respectively was synthesized by using methyl ethyl ketone peroxide (MEK_p, Butanox M60, Azo Nobel)-cobalt octoate initiator system. The adsorption of uranium ions on the sample (0.05 g copolymer and 5 mL of U(VI) solution were mixed) of the crosslinked polyester resin functionalized with acrylic acid was carried out in a batch reactor. The effects of adsorption parameters of the contact time, temperature, pH of solution and initial uranium(VI) concentration for U(VI) adsorption on the crosslinked polyester resin functionalized with acrylic acid were investigated. The adsorption data obtained from experimental results depending on the initial U(VI) concentration were analyzed by the Freundlich, Langmuir and Dubinin–Radushkevich (D–R) adsorption isotherms. The adsorption capacity and free energy change were determined by using D–R isotherm. The obtained experimental adsorption data depending on temperature were evaluated to calculate the thermodynamic parameters of enthalpy (ΔH°), entropy (ΔS°) and free energy change (ΔG°) for the U(VI) adsorption on the crosslinked polyester resin functionalized with acrylic acid from aqueous solutions. The obtained adsorption data depending on contact time were analyzed by using adsorption models such as the modified Freundlich, Elovich, pseudo-first order and pseudo-second-order kinetic models.     

TG,DTA and electrical conductance properties of some Cu(II) AND Mn(II) bisazo- dianils complexes

The TG and DTA of a new series of Mn(II) and Cu(II) complexes with a number of newly prepared bisazo-dianil ligands were studied in the temperature range (20-700°C). The TG and DTG curves display to main steps, the first one within the temperature range (25-330°C) correspond to the elimination of water or and ethanol from the complexes. The second step within the range (350-625°C) is due to the decomposition of the complexes yielding the metal oxides as the final product. The rate constants of the dehydration and decomposition reactions were determined, from which some kinetic parameters were evaluated. The DTA curves show that the dehydration of the metal complexes is an endothermic reaction. In all cases the anhydrous metal complexes undergo exothermic decomposition reactions to give the metal oxide. The thermodynamic parameters (ΔE, ΔH, ΔS, ΔG) for the occurring processes are calculated. The electrical conductivities of the solid complexes were measured and the activation energy of the complex and its free ligand are also calculated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Micellization of Pentanediyl-1,5-bis(hydroxyethylmethyl hexadecylammonium Bromide) as a Cationic Gemini Surfactant in Aqueous Solutions: Investigation Using Conductometry and Fluorescence Techniques

Pentanediyl-1,5-bis (hydroxyethylmethylhexadecylammonium bromide) was synthesized and characterized as a type of novel gemini cationic surfactant. Its solution properties were determined at various temperatures by conductivity measurements and the fluorescence quenching technique. The CMC increased in the range of 1.85 to 2.77 μmol⋅L⁻¹ as the temperature increased. The aggregation number was determined at various concentrations of NaBr solutions by the fluorescence quenching of pyrene. The thermodynamic parameters of micellization were determined using the mass law equation and the values of ΔG °, ΔH °and ΔS ° were determined for the micellization process.     

Adsorption kinetic,thermodynamic and desorption studies of phosphate onto hydrous niobium oxide prepared by reverse microemulsion method

A type of Nb₂O₅⋅3H₂O was synthesized and its phosphate removal potential was investigated in this study. The kinetic study, adsorption isotherm, pH effect, thermodynamic study and desorption were examined in batch experiments. The kinetic process was described by a pseudo-second-order rate model very well. The phosphate adsorption tended to increase with a decrease of pH. The adsorption data fitted well to the Langmuir model with which the maximum P adsorption capacity was estimated to be 18.36 mg-P g⁻¹. The peak appearing at 1050 cm⁻¹ in IR spectra after adsorption was attributed to the bending vibration of adsorbed phosphate. The positive values of both ΔH° and ΔS° suggest an endothermic reaction and increase in randomness at the solid-liquid interface during the adsorption. ΔG° values obtained were negative indicating a spontaneous adsorption process. A phosphate desorbability of approximately 68% was observed with water at pH 12, which indicated a relatively strong bonding between the adsorbed phosphate and the sorptive sites on the surface of the adsorbent. The immobilization of phosphate probably occurs by the mechanisms of ion exchange and physicochemical attraction. Due to its high adsorption capacity, this type of hydrous niobium oxide has the potential for application to control phosphorus pollution.     

Adsorptive removal of uranium from aqueous solution using chitosan-coated attapulgite

Chitosan-coated attapulgite beads were prepared by coating chitosan on naturally and abundantly available attapulgite, and made into spherical beads to adsorb uranium from aqueous solutions. The beads were characterized by SEM, EDS and FT-IR. The characteristics of beads of adsorbing uranium(VI) from aqueous solutions were studied at different conditions of pH, initial uranium concentration, contact time, biomass dosage and temperature. The pseudo-second order rate equation was used to describe the kinetic data, and isotherm data were fitted to Langmuir and Freundlich adsorption models. Thermodynamic parameters (ΔG°, ΔH°, and ΔS°) of the biosorption were also calculated. Thermodynamic parameters of the CAAB, viz., ΔG°(308 K), ΔH°, and ΔS° were determined to be −21.59, 6.29l and 90.51 J/mol K, respectively. The experimental results demonstrate that the beads of chitosan coated onto attapulgite exhibit considerable potential for application in both adsorption and removal of uranium from aqueous solutions.     

Effect of temperature on thermodynamic characteristics of the dissociation of glycylglycine in aqueous solutions of electrolytes

Heats of reaction of glycylglycine with nitric acid and potassium hydroxide solutions are determined by two calorimetric procedures at 288.15, 298.15, 308.15 K and an ionic strength of solution of 0.25, 0.50, and 0.75 in the presence of KNO₃. Standard thermodynamic characteristics (Δ_r H°, Δ_r G°, Δ_r S°, and Δ_p C°) are calculated for the acid-base reactions in aqueous peptide solutions. The effects of the concentration of background electrolyte and temperature on the heats of dissociation of glycylglycine are considered.     

Thermodynamic characteristics of alanine-18-crown-6 ether complexes in binary water-acetone solvents

The formation of 18-crown-6 ether (18C6) complexes with D,L-alanine (Ala) in mixed wateracetone solvents with 0.0, 0.08, 0.17, 0.22, and 0.30 mole fractions of acetone (T = 298.15 K) was investigated by means of calorimetry. Thermodynamic characteristics of the reaction of the molecular [Ala18C6] complex formation (Δ_r G°, Δ_r H°, and TΔ_r S°) were calculated on the basis of calorimetric data. Analysis of solvation contributions of reagents into the enthalpy of the [Ala18C6] formation reaction showed that the changes in the reaction energy when the solvent composition is varied are determined by the changes in the solvate state of 18C6.     

Dielectric relaxation of sulfolane in benzene solution from microwave absorption data

The electric constant (ɛ′) and dielectric loss (ɛ″) for dilute solutions of sulfolane in benzene solution has been measured at 9.885 GHz at different temperatures (25, 30, 35, and 40°C) by using standard microwave techniques. Following the single frequency concentration variational method, the dielectric relaxation time (τ) and dipole moment (μ) have been calculated. It is found that dielectric relaxation process can be treated as the rate process, just like the viscous flow. Based on the above studies, monomer structure of sulfolane in benzene has been inferred. The presence of solute-solvent associations in benzene solution has been proposed. Energy parameters (ΔH _ɛ, ΔF _ɛ, ΔS _ɛ) for dielectric relaxation process of sulfolane in benzene at 25, 30, 35, and 40°C have been calculated and compared with the corresponding energy parameters (ΔH _η, ΔF _η, ΔS _η) for the viscous flow.     

Removal of Cu(II), Zn(II) and Co(II) ions from aqueous solutions by adsorption onto natural bentonite

In this study, the removal of Cu(II), Zn(II) and Co(II) ions from aqueous solutions using the adsorption process onto natural bentonite has been investigated as a function of initial metal concentration, pH and temperature. In order to find out the effect of temperature on adsorption, the experiments were conducted at 20, 50, 75 and 90 °C. For all the metal cations studied, the maximum adsorption was observed at 20 °C. The batch method has been employed using initial metal concentrations in solution ranging from 15 to 70 mg L⁻¹ at pH 3.0, 5.0, 7.0 and 9.0. A flame atomic absorption spectrometer was used for measuring the heavy metal concentrations before and after adsorption. The percentage adsorption and distribution coefficients (K _d) were determined for the adsorption system as a function of adsorbate concentration. In the ion exchange evaluation part of the study, it is determined that in every concentration range, adsorption ratios of bentonitic clay-heavy metal cations match to Langmuir, Freundlich and Dubinin-Kaganer-Radushkevich (DKR) adsorption isotherm data, adding to that every cation exchange capacity of metals has been calculated. It is shown that the bentonite is sensitive to pH changes, so that the amounts of heavy metal cations adsorbed increase as pH increase in adsorbent-adsorbate system. It is evident that the adsorption phenomena depend on the surface charge density of adsorbent and hydrated ion diameter depending upon the solution pH. According to the adsorption equilibrium studies, the selectivity order can be given as Zn²⁺>Cu²⁺>Co²⁺. These results show that bentonitic clay hold great potential to remove the relevant heavy metal cations from industrial wastewater. Also, from the results of the thermodynamic analysis, standard free energy ΔG ⁰, standard enthalpy ΔH ⁰ and standard entropy ΔS ⁰ of the adsorption process were calculated.     

Micellization of dodecyldimethylethyl- ammonium bromide in aqueous solution

Specific conductivity of aqueous solutions of dodecyldimethylethylammonium bromide has been determined in the temperature range of 15-40°C. The critical micelle concentration (cmc) and ionization degree of the micelles, b, were determined from the data. Thermodynamic functions, such as standard Gibbs free energy, ΔG _m°, enthalpy, ΔG _m°, and entropy, ΔG _m°, of micellization, were estimated by assuming that the system conforms to the mass action model. The change in heat capacity upon micellization, ΔG _m°, was estimated from the temperature dependence of ΔG _m°. An enthalpy-entropy compensation phenomenom for the studied system has been found. This revised version was published online in July 2006 with corrections to the Cover Date.     

Enthalpies of formation of organic free radicals of alcohol and ether derivatives

Numerical values of the enthalpies of formation of oxygen-containing organic radicals of alcohol and ether derivatives (Δ_f H°) were analyzed. For seven out of 25 compounds the corresponding Δ_f H° values were determined more accurately. For 35 radicals, the Δ_f H° values were determined for the first time based on the published values of bond dissociation energies in molecules and on the corresponding enthalpies of their formation. Based on the analysis of the Δ_f H° values for 60 radicals studied, a structure—property (enthalpy of formation) correlation was established, described in the framework of the group additivity scheme. The parameters for calculations of Δ_f H° values for the title radicals were recommended.     

The Enthalpies of Solution and Solvation of L-Serine in Aqueous Alcoholic Solutions at 298.15 K

The integral enthalpies of solution (Δ_sol H ^m ) of L-serine in water-alcohol (ethanol, n-propanol, isopropanol) mixtures were measured over the range of alcohol concentrations up to 0.32 mole fractions. The standard enthalpy of solution (Δ_sol H°), enthalpy of transfer of L-serine from water into a mixed solvent (Δ_tr H°), and enthalpy of solvation (Δ_solv H°) were calculated. The dependences of Δ_sol H°, Δ_solv H°, and Δ_tr H° on the composition of mixtures had extrema. The calculated enthalpy coefficients of the pair interactions of L-serine with alcohol molecules were positive and increased along the series ethanol, n-propanol, isopropanol. The data obtained were interpreted in terms of different types of interactions in solutions and the influence of the nature of amino acid residues on the thermochemical solution characteristics. Original Russian Text ? I.N. Mezhevoi, V.G. Badelin, 2008, published in Zhurnal Fizicheskoi Khimii, 2008, Vol. 82, No. 4, pp. 789–791.     

Solvent extraction of thorium from nitric acid solutions using di-N-butyl sulfoxide (DBSO) in xylene

The extraction of thorium(IV) from nitric acid solutions by di-n-butyl sulfoxide (DBSO) in xylene has been investigated as a function of acid, extractant and the metal concentration. The effect of contact time and diverse ions on the extraction has been examined. Phosphate, fluoride, oxalate and perchlorate reduce the extraction to some extent. The extraction of other metal ions, especially impurities associated with thorium in ores, has been measured under optimised conditions selected for thorium extraction. Na(I), K(I), Ca(II), Sr(II), Mn(II), Fe(II), Ni(II), Zn(II), Pb(II), Al(III), Ti(IV) and Hf(IV) are not extracted. Among the stripping solutions employed for back-extraction, deionized water is found to be the best and more than 99% thorium can be back-extracted in three stages. The extracted species is supposed to be Th(NO₃)₄·2DBSO. The extraction is found to be almost independent of the thorium concentration in the range between 4.3·10^–4–4.3·10^–2M and inversely dependent upon the temperature. The values of thermodynamic functions H, G and S for extraction equilibrium have been evaluated to be –19.6±2.9 kJ·mole^–1, –18.1±2.0 kJ·mole^–1 and –5.0±2.9 J·mole^–1·K^–1, respectively.     

Temperature Effect on the Extraction of Uranyl and Thorium Nitrates by Tributylphosphate in Kerosene

Temperature effect on the extraction of uranyl and thorium nitrates by tributyl-phosphate (TBP) has been investigated at different nitric acid concentration (–0.17 ～ 3 N), and solvent composition from 10°C to 60°C. Thermodynamic quantities for the extraction of uranyl nitrate and thorium nitrate were also estimated.