Acetals and ethers,XVII. One- or two-step syntheses of 2-(2-alkoxyethyl)-1,3-dioxacyclanes

2-(2-Alkoxyethyl)-1,3-dioxanes (1) were prepared by ap-toluenesulfonic acid-catalyzed, one-step reaction of propenal with a mixture of aliphatic alcohol and trimethylene glycol in good yields. The transacetalization reaction of 1,1,3-trialkoxypropanes (3) with ethylene glycol or propylene-(1,2)glycol afforded good yields of pure 2-(2-alkoxyethyl)-1,3-dioxolanes (5 or6), respectively. This reaction proceeds through an intermediate 1,3-dialkoxy-1-(2-hydroxyalkoxy)-propane.

---

Ein- oder Zweistufensynthese von 2-(2-Alkoxyethyl)-1,3-dioxacyclanen

Zusammenfassung In der durchp-Toluolsulfonsäure — katalysierten, direkten Reaktion von Propenal mit einem Gemisch von aliphatischem Alkohol und Trimethylenglykol wurden die entsprechenden 2-(2-Alkoxyethyl)-1,3-dioxane (1) in guten Ausbeuten erhalten. Die Umacetalisierung von 1,1,3-Trialkoxypropanen (3) mit Ethylenglykol oder 1,2-Propylenglykol lieferte 2-(2-Alkoxyethyl)-1,3-dioxolane (5 oder6) in guten Ausbeuten. Die Umacetalisierungsreaktion von 1,1,3-Trialkoxypropanen verläuft über 1,3-Dialkoxy-1-(2-hydroxyalkoxy)-propane als Zwischenprodukte.

     

Reactions of triads Se8KOHDMSO,Se8KOHDMSO,TeKOHHMPA with acetylenes

A new general approach to anionic transformations of acetylenes using superbasic media has been developed. It allows series of new reactions which are not undergone by acetylene under conventional conditions. The triads Se₈KOHdimethylsulfoxide (DMSO), Se₈KOHDMSO, TeKOH-hexamethyl-phosphorictriamide (HMPA) are proposed as new effective reagents for the preparation of unsaturated compounds of sulfur, selenium and tellerium. A series of reactions of acetylene with sulfur, selenium and tellerium proceeding in DMSO or HMPA in the presence of alkali and water at 80–120° leading to divinyl sulfide, divinyl selenide and divinyl teluride in 25–80% yields have been found. Thiophen, di-1-(1,3-butadienyl) sulfide, 1-vinyl-2-thiabicyclo[3.2.0]hept-3-ene, and dihydrothiophen have been obtained by the reaction of vinylacetate with sulfur. The reaction of vinylacetylene with selenium affords selenophen, di-1-(1,3-butadienyl) selenide, 1-vinyl-2-selenabicyclo[3.2.0]hept-3-ene, methyl (1-(1,3-butadienyl) sulfide, and methylthiomethyl 1-(1,4-butadienyl) selenide, vinyl 1-(1,3-butadienyl) sulfide, and methylthiomethyl 1-(1,3-butadienyl) selenide (the latter two with DMSO participation). The reaction of vinylacetate with tellerium gives mainly di-1-(1,3-butadienyl) telluride. A series of reactions between DMSO and selenium leading to dimethyl sulfide, dimethyl sulfoselenide, and methylthiomethyl selenide have been observed.     

Synthesis of 1-Bromo-3-butyn-2-one and 1,3-Dibromo-3-buten-2-one

Synthetic procedures for the preparation of 1-bromo-3-butyn-2-one and 1,3-dibromo-3-buten-2-one are given. These compounds are prepared from 2-bromomethyl-2-vinyl-1,3-dioxolane, which can readily be prepared from 2-ethyl- 2-methyl-1,3-dioxolane. The synthetic routes are as follows: 2-bromomethyl-2-vinyl-1,3-dioxolane is converted to 2-(1,2-dibromoethyl)-2-bromomethyl-1,3-dioxolane. Double dehydrobromination with ^tBuOK affords 2-ethynyl-2-bromomethyl-1,3-dioxolane. Formolysis with formic acid gives 1-bromo-3-butyn-2-one. Deacetalized 2-bromoethyl-2-vinyl-1,3-dioxolane was treated with Br₂ and Li₂CO₃/12-crown-4 in tetrahydrofuran to give 1,3-dibrom-3-buten-2-one in moderate yield.     

(4+2)-cycloaddition of nitroalkenes with ynamines; formation of a 4H-1,2-oxazine 2-oxide derivative

The formation of a thermally unstable (4+2)-cycloadduct, a 4H-1,2-oxazine 2-oxide derivative ($\text{1}$), from the reaction of 1-nitrocyclopentene with 1-phenyl-2-(1-pyrrolidinyl)acetylene has been proven by the structure elucidation of isoxazole derivative $\text{3}$ which results from thermal rearrangement and by the structure determination of the 1,3-dipolar adducts $\text{5}$ of $\text{1}$ with electron-deficient acetylenes.     

Addition von Acetylendicarbonsäuredimethylester an Imidazole; Aminierung der Addukte: neue Synthesen von 3-(2-Imidazolyl)-2-pyridon-4,5-dicarbonsäureamiden und Pyrido[1,2-a]pyrazinen

The reaction between dimethyl acetylene dicarboxylate and 2-amino-1-methylimidazole affords dimethyl 2-amino-1-methyl-1,3-diazepine-5,6-dicarboxylate in low yield. This 1:1 – adduct was formed by addition of the acetylenic compound to the enamine double bond of the imidazole ring followed by ring enlargement. On the other hand, 2:1 – adducts to the imine bond are isolated in moderate yield when dimethyl acetylene dicarboxylate is treated with either 1-methyl-2-methylmercapto-imidazole or 1-methyl-2-methylmercapto-imidazoline. These adducts behave differently on heating with ethylamine: the adduct of the imidazole series cyclizes to the pyridone 15 with concomittant loss of one carboxamide group whereas that of the imidazoline series forms a pyrido[1,2-a]pyrazine derivative 20 , both in high yield. The possible reaction mechanisms are discussed. ¹³C–NMR.-spectroscopy and X-ray analysis were used in the determination of several structures.     

Synthesis of Some 3-Substituted 1,2-Dihydroindoles

The reaction of 4-oxo-2-(2-oxo-1,2-dihydroindol-3-ylidene)hydrazone-1,3-thiazin-6-methyl carboxylate 2 with hydrazine hydrate in methanol gave 4-oxo-2-(2-oxo-1,2-dihydroindol-3-ylidene)hydrazone-1,3-thiazin-6-carbonylhydrazine 3. Furthermore, the reaction of 3 with carbon disulfide and then hydrazine hydrate afforded 3-[6-(4-amino-5-thioxo-4,5-dihydro-1H-1,2,4-triazol-3-yl)-4-oxo-1,3-thiazin-2-yl] hydrazone-1,3-dihydroindol-2-one 5. the latest reacted with DMAD to give {6-hydroxy-3-[4-oxo-2-(2-oxo-1,2-dihydroindol-3-ylidene)hydrazone-1,3-thiazin-6yl]-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazin-7-ylidene}methoxycarbonylmethylene 6.     

Reactions of cyclic 1,3-dicarbonyl compounds with 1,2(1,4)-dihydro-1-methyl-2(4)-methylene-N-heterocycles. A new access to 6,12-methano-dibenz[d,g]-[1,3]oxazocinones

Summary The enamine-type methylene-N-heterocycles1–5 react with cyclic 2-ethoxymethylene-1,3-dicarbonyl compounds6 to give 2-[2-(hetarylidene)ethylidene]-1,3-dicarbonyl compounds7–14. The result of the reactions between 1,2-dihydro-1-methyl-2-methylene-quinoline (1a) and cyclic 1,3-dicarbonyl compounds depends on the nature of the dihydro intermediatesA/B. Dehydrogenation of keton intermediatesA results in 2-(1,2-dimethyl-4(1H)-quinolylidene)-1,3-dicarbonyl compounds17–21. Enol intermediatesB with 6-membered dicarbonyl ring form 6,12-methano-dibenz-[d,g][1,3]oxazocinones22–25.¹H NMR spectra and X-ray structure analysis prove the structure of23.

---

Reaktionen cyclischer 1,3-Dicarbonylverbindungen mit 1,2(1,4)-Dihydro-1-methyl-2(4)-methylen-N-heterocyclen. Ein neuer Zugang zu 6,12-Methano- dibenz[d,g][1,3]oxazocinonen

Zusammenfassung Aufgrund ihres Enamincharakters reagieren die Methylen-N-heterocyclen1–5 mit cyclischen 2-Ethoxymethylen-1,3-dicarbonylverbindungen6 zu den 2-[2-(Hetaryliden)ethyliden]-1,3-dicarbonylverbindungen7–14. Das Ergebnis der Reaktionen zwischen 1,2-Dihydro-1-methyl-2-methylen-chinolin (1a) und cyclischen 1,3-Dicarbonylverbindungen hängt von der Natur der zwischenzeitlich entstehenden DihydroverbindungenA/B ab. Die Intermediat-KetoneA gehen durch Dehydrierung während der Reaktion in die 2-(1,2-Dimethyl-4(1H)chinolyliden)-1,3-dicarbonylverbindungen17–21 über. Die Intermediat-EnoleB mit sechsgliedrigem Dicarbonylring bilden in intramolekularer Reaktion die 6,12-Methano-dibenz[d,g][1,3]oxazocinone22–25, deren Struktur am Beispiel der Verbindung23 durch¹H-NMR sowie durch Röntgenkristallstrukturanalyse bewiesen wird.

     

7-Substituted 8-vinyl-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-diones and their broncholytic activity

Summary Alkylation of 8-vinyl-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-dione (1) with alkyl halides inDMF in the presence of potassium carbonate, or alternatively, alkylation of its sodium salt (2) with alkyl iodide or hydroxyalkyl iodide afforded the 7-alkyl- or 7-(-hydroxyalkyl)-8-vinyl-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-diones3. 2-Substituted oxiranes reacted with1 catalyzed by2 or Triton B to yield 7-(2-hydroxyalkyl)-8-vinyl-1,3-dimethyl-3,7-dihydro-1H-purine-2,6-diones4. Compounds3 and4 were tested for broncholytic activity. The most effective derivatives were3c and4b.

---

7-Substituierte 8-Vinyl-1,3-dimethyl-3,7-dihydro-1H-purin-2,6-dione und ihre broncholytische Wirkung

Zusammenfassung Alkylierung von 8-Vinyl-1,3-dimethyl-3,7-dihydro-1H-purin-2,6-dion (1) mit Halogenalkanen in Gegenwart von Kaliumkarbonat inDMF oder Alkylierung seines Natrium-Salzes (2) mit Iodalkanen beziehungsweise Iodalkanolen führte zu den 7-Alkyl- bzw. 7-(-Hydroxyalkyl)-8-vinyl-1,3-dimethyl-3,7-dihydro-1H-purin-2,6-dionen3. 2-Substituierte Oxirane reagierten mit Verbindung1 unter Katalyse durch2 oder Triton B zu den entsprechenden 7-(2-Hydroxyalkyl)-derivaten4. Die Substanzen3 und4 wurden auf ihre broncholytische Wirkung geprüft. Die höchste Aktivität wurde bei den Derivaten3c und4b festgestellt.

     

Flash vacuum pyrolysis of 2,2-dioxo-1H,3H-pyrrolo[1,2-c]thiazoles and 2-vinyl-1H-pyrroles

The flash vacuum pyrolysis of new 1,1-dimethyl- and 1-methyl-1H,3H-pyrrolo[1,2-c]thiazole-2,2-dioxides gave penta-substituted 2-vinyl-1H-pyrroles via sigmatropic [1,8]-H shift of the corresponding azafulvenium methide intermediates. In some cases these 1H-pyrroles underwent rearrangement to 2-allyl-1H-pyrroles. Di-substituted 2-vinylpyrroles have also been prepared and their reactivity studied. Under FVP N-benzyl-pyrrol-2-ylpropenoates were converted into 3H-pyrrolizin-3-ones. On the other hand, microwave-assisted reaction of 1-benzyl-2-vinyl-1H-pyrrole gave a 4,5,6,7-tetrahydro-1H-indole derivative.     

Synthesis of oxoindolin-3-ylidene-1,3-dithioles

An efficient and one-pot synthesis of 2-(2-oxoindolin-3-ylidene)-1,3-dithiole-4,5-dicarboxylates by a three-component condensation reaction of isatins, carbon disulfide and dialkyl acetylendicarboxylates in the presence of Bu₃P is reported. Reaction of carbon disulfide and dialkyl acetylene dicarboxylates with acenaphthylene-1,2-dione, ninhydrine and pyrimidine-tetraone resulted in the formation of 2-(2-oxoacenaphthylen-1(2H)-ylidene)-1,3-dithiole-4,5-dicarboxylates, 2-(1,3-dioxo-1H-inden-2(3H)-ylidene)-1,3-dithiole-4,5-dicarboxylates and 2-(2,4,6-trioxotetrahydropyrimidin-5(6H)-ylidene)-1,3-dithiole-4,5-dicarboxylates, respectively, in the same conditions.     

Stereochimie d'heterocycles du groupe IVB—II : Syntheses stereoselectives d'hydrogeno-1 et d'alkyl-1 sila-1 cyclobutanes

The reaction between n-butyllithium and 1,2 (or 1,3)-dimethyl-1-t-butoxy-1-silacyclobutanes proceeds with retention of configuration at silicon, and yields 10/90 (or 80/20) Z/E mixture of 1,2 (or 1,3)-dimethyl-1-n-butyl-1-silacyclobutanes. Methylation of 2 (or 3)-methyl-1-t-butoxy-1-silacyclobutanes (Z/E = 15/85 or 65/35) by methylmagnesium iodide gives 15/85 (or 65/35) Z/E mixture of 1,2 (or 1,3)-dimethyl-1-silacyclobutanes. The proposed configurations for substituted silacyclobutanes are supported by spectroscopic data (RMN) and chemical results (correlation of configuration and stereomutation of hydrogenosilacyclobutanes).     

Radikalische Cyclisierungen von Alkenyl-substituierten 4,5-Dihydro-1,3-thiazol-5-thiolen

Radical Cyclizations of Alkenyl-Substituted 4,5-Dihydro-1,3-thiazole-5-thiols Heating of 5-alkenyl- or 5-alkinyl-4,5-dihydro-1,3-thiazole-5-thiols of type 5 in the presence of a radical initiator gave dithiaspirobicycles in fair-to-excellent yield (Scheme 3). Under analogous conditions, the 4,5-dihydro-4-vinyl-1,3-thiazole-5-thiol 5d underwent a cyclization to give the annellated dithiabicycle 7 (Scheme 4). In this reaction, a minor product 8 was formed by an unknown reaction mechanism. The structure of 8 was established by X-ray crystallography. The starting 1,3-thiazole-5-thiols 5 have been synthesized by carbophilic alkylation of me C?S group of 1,3-thiazole-5(4H)-thiones with Grignard-reagents or alkylcuprates. The thiazolethiones were obtained by the reaction of 3-amino-2H-azirines with thiobenzoic acid followed by sulfurization and cyclization. The 4-benzyl derivative 1b was thermally rearranged via 1,3-benzyl migration to yield the benzyl (1,3-thiazol-5-yl) sulfide 11 (Scheme 5).     

Diastereoselective Diels-Alder reactions of a novel cyclopropenyl-containing chiral auxiliary

A novel cyclopropenyl-containing 1,3-spiroaminoalcohol auxiliary has been used in a variety of asymmetric Diels-Alder reactions providing endo adducts with diastereomeric ratios ranging from 2:1 up to >99:1. In addition, unexpected regiochemistry was observed for a Diels-Alder reaction between cyclopropenyl dienophile and 4-vinyl-1,2-dihydronapthalene.     

Syntheses,Structures and Luminescence Sensing Properties of Two Cd(II) MOFs Constructed from Mixed Ligands

Hydrothermally reaction of Cd(NO₃)₂·4H₂O, pimelic acid (H₂Pim) mixed with two N-containing ligands of 1,2-bis(2-methyl-imidazol-1-ylmethyl)benzene (1,2-mbix) or 1,3-bis(2-methyl-imidazol-1-ylmethyl)benzene (1,3-mbix) gave rise to two new Cd(II) MOFs, [Cd(Pim)(1,2-mbix)] (1) and [Cd(Pim)(1,3-mbix)]·H₂O (2). Both MOFs were structurally characterized by IR and UV–Vis spectra, single-crystal and powder X-ray diffraction, thermogravimetric analyses. MOF 1 shows a fourfold interpenetrating dia network. Differently, MOF 2 shows a 2D?→?3D interdigitated architecture base on the 6³ hcb layer when 1,2-mbix was replaced by 1,3-mbix. The luminescent properties of 1 and 2 have been investigated. Furthermore, the luminescent quenching experiments suggest both MOFs exhibit good selectivity and sensitivity to detect Fe³⁺ and Cr₂O₇^2? in water.

     

NBO,NMR Analysis,and Hybrid DFT Study of Structural and Configurational Properties of Di-tert-butyl-, bis(trimethysilyl)-, Bis(trimethgermyl)-, and Bis(trimethylstannyl)- cyclopenta-1,3-dienes

Abstract

The alkyl 1,2-shift in di-tert-butylcyclopenta-1,3-diene (1) and the metallotropic 1,2-shifts in bis(trimethylsilyl)cyclopenta-1,3-diene (2), bis(trimethylgermyl)cyclopenta-1,3-diene (3), and bis(trimethylstannyl)cyclopenta-1,3-diene (4) have been investigated by means of natural bond orbital (NBO), nuclear magnetic resonance (NMR) analysis, and hybrid density functional theory based methods. The B3LYP/DZVP results showed that the M(CH₃)₃ group [M = C (1), Si (2), Ge (3), and Sn (4)] migration barrier heights around cyclopentadienyl rings decrease from di-tert-butylcyclopenta-1,3-diene to its stannane derivative. Also, based on the results obtained, the stabilities of the 5,5-isomers in comparison to the 1,5- and 2,5-isomers increase from di-tert-butylcyclopenta-1,3-diene to its stannane derivative. The results suggest that in these compounds the metallotropic shifts are controlled by the stabilization energies associated with σ→π* electron delocalizations and the increase of the σ_C5-M→π*_C1-C2 electron delocalizations facilitates the M(CH₃)₃ group migrations around cyclopentadienyl rings. Based on the aromatic stabilization energy (ASE) values calculated, the aromaticity increases from the 5,5-isomers of di-tert-butylcyclopenta-1,3-diene to its stannane derivative but the variation of the nucleus-independent chemical shift, NICS(0) and NICS(1), values calculated are not in accordance with the ASE values calculated and the σ_C5-M→π*_C1-C2

electron delocalizations. The correlations between the sigmatropic shift barrier heights, σ→π* electron delocalizations, ASE, and NICS values were investigated.

GRAPHICAL ABSTRACT     

A facile synthesis of two thioacrolein dimers. A new entry to a flavor component in asparagus

A simple synthesis of 3,4-dihydro-3 vinyl-1,2-dithiin (2) and 2-vinyl-4H-1,3 dithiin (3) is reported.     

Synthesis of tricyclic phospholene oxides by cycloaddition of phosphorus halides with heterocyclic analogs of 1-vinyl-3,4-dihydronaphthalenes

Replacement of C-4 with a hetero substituent (NR,O,S) in the 1-vinyl-3,4-dihydronaphthalene system has provided a new type of diene for participation in the McCormack cycloaddition reaction with P(III) halides. The tricyclic phospholene oxides so obtained are the first to bear an additional heteroatom in the ring system. 1,2-Dihydro-7-methoxy-1-(p-toluenesulfonyl)-4-vinylquinoline is a stable solid that reacts with methylphosphonous dichloride to give, after hydrolysis of the cycloadduct, the 1,2,4,5-tetrahydro-1H-phospholo-[2,3-c]quinoline ring system. The dihydroquinoline moiety was aromatized by detosylation with potassium t-butoxide. The tendency of 4-vinyl-2H-benzopyran to dimerize was a serious complication in its use, and the cycloaddition with methylphosphonous dichloride proceeded only in low yield. The product, a 2,3,3a,4-tetra-hydrobenzo[3,2-d]pyran derivative, was a stable, easily purified and characterized substance. 4-Vinyl-2H-benzo[b]thiopyran was more stable than the pyran, but the phospholo derivative from reaction with methylphosphonous dichloride was more difficult to purify. All products were characterized by ¹³C-nmr spectroscopy.     

Lipase-catalyzed alcoholysis of diol dibenzoates: selective enzymatic access to the 2-benzoyl ester of 1,2-propanediol and preparation of the enantiomerically pure (R)-1-O-benzoyl-2-methylpropane-1,3-diol

Enzymatic debenzoylation of 1,2-propanediol dibenzoate with 1-octanol has been studied in organic solvent using lipases from different sources. In general a slow, highly regioselective alcoholysis in diisopropyl ether affords exclusively a monoester benzoylated at the secondary hydroxy group although the reaction proceeds with low enantioselectivity. In the presence of Pseudomonas cepacia lipase absorbed onto celite, a faster reaction allows the preparation of the 2-benzoyl ester of (R)-1,2-propanediol (82% ee) and the enantiomerically pure (R)-1-O-benzoyl-2-methylpropane-1,3-diol (>98% ee).     

Quantum Chemical Study of Mechanisms of Organic Reactions: VII. Reaction of Ethane-1,2-dithiol with 1,3-Dichloropropene in the System Hydrazine Hydrate–KOH

A mechanism has been proposed for the reaction of 1,3-dichloropropene with ethane-1,2-dithiol in the system hydrazine hydrate–potassium hydroxide on the basis of DFT quantum chemical calculations [B3LYP/6-311++G(d,p)]. The proposed mechanism involves several consecutive steps, in particular nucleophilic substitution of chlorine at the sp³-hybridized carbon atom by sulfur, prototropic allylic rearrangement of the monosubstitution product with double bond migration toward the sulfur atom, dithiolane ring closure via nucleophilic attack of the second thiolate group on the carbon atom in the γ-position with respect to the second chlorine atom, and prototropic allylic rearrangement of 2-vinyl-1,3-dithiolane to more stable 2-ethylidene-1,3-dithiolane.