新型水溶性钴酞菁的制备及其催化氧化硫醇的性能

采用丁二酸酐、顺丁烯二酸酐对四氨基钴酞菁进行改性后制得两种新型水溶性钴酞菁衍生物, 测试了这两种改性钴酞菁对巯基乙醇的催化氧化性能, 并考察了溶液pH值、温度和时间对催化氧化活性的影响, 结果表明, 在pH＝11时, 两种改性钴酞菁对巯基乙醇的催化氧化性能最好；随着温度的升高, 催化氧化性能提高.     

磺化双酞菁钴自组装膜结构的表面增强拉曼光谱

采用自组装的方法构建了双核磺化酞菁钴轴向配位有序排列的膜层结构. 结合双核磺化酞菁钴分子体系自身所具有的性质及其和桥联分子四巯基吡啶之间相互作用的信息, 对其自组装膜的表面增强拉曼光谱进行了分析, 探讨了其自组装行为, 合理地解释了本自组装体系的膜层结构. 研究结果表明, 双核磺化酞菁钴分子(Bi-CoPc)在这种自组装膜中是以与基底平面存在一定夹角的倾斜的方式排列的.     

四邻苯二甲酰亚胺基金属酞菁的合成及其性质研究

从氨基酞菁出发，合成它们的衍生物——四邻苯二甲酰亚胺基金属(Cu^Ⅱ和Co^Ⅱ)酞菁，并对相关化合物进行了质谱、紫外可见光谱、红外光谱表征．其紫外可见光谱中Q带有分裂现象．实现了以氨基酞菁为前体物质进行衍生化的合成实验，讨论了取代基的大小、结构、取代位置及酞菁环中心金属的差异对其Q带分裂现象的影响。     

含四硫富瓦烯结构单元的酞菁和四氮杂卟啉衍生物的研究概况

综述了含四硫富瓦烯(TTF)结构单元的酞菁和四氮杂卟啉衍生物的合成、光物理和电化学性质以及聚集和自组装性能的研究概况.     

双核金属酞菁的制备及其对二苯并噻吩的催化氧化性能

采用微波法合成了双核酞菁钴,并采用红外光谱、紫外可见光谱、热重分析对其进行表征。以二苯并噻吩(DBT)为反应底物,考察双核酞菁钴对DBT催化氧化性能,筛选出较优催化剂,并进行脱硫反应工艺条件优化。结果表明,双核酞菁钴具有较好的催化性能,在室温下、双核酞菁钴用量为0.01 g(cat)/5 m L、空气流量为80 m L/min、反应温度为40℃、反应1 h,DBT脱硫率达到97.17%。催化剂重复使用5次,催化效果无明显下降。氧化产物经红外光谱、质谱分析为DBTO2。对芳香烃及烯烃进行了催化氧化实验,发现该工艺对油品的质量基本无影响。     

酞菁钴液相催化氧化羰基硫(COS)的研究

本文首次报道在液相中，用金属酞菁催化氧化脱除羰基硫（COS）。发现COS先被水解成HS~－，HS~-再被氧化成S，酞菁钴（CoPC）的活性高于其它金属酞菁（MPC），酞菁苯环上推电子基因使酞菁的催化活性提高，双核酞菁钴的活性高子单核酞菁钴。D296树脂负载的酞菁钴的催化活性高于均相酞菁钴的活性。     

稀土（Nd,Pr）（Ⅲ）双酞菁衍生物的合成,表征和气敏特性

合成了八－４－（四氢糖氧基）酞菁钕（Ⅲ）（Ａ）、八－４－（β－萘氧基）酞菁钕（Ⅲ）（Ｂ）、八－４－（２，４－二叔戊基苯氧基）酞菁钕（Ⅲ）（Ｃ）和八－４－（２，４－二叔戊基苯氧基）酞菁镨（Ⅲ）（Ｄ）４种新的稀土（Ｎｄ、Ｐｒ）（Ⅲ）双酞菁衍生物，经元素分析、红外光谱、核磁共振谱表征。紫外可见光谱表明，它们在氯仿（１０＾－６ｍｏｌ／Ｌ）溶液中以单分子形式存在。热重分析证明配合物的热稳定性：Ｂ＞Ｃ￣Ｄ＞Ａ     

金属酞菁催化巯基乙醇氧化的研究

研究了２，９，１６，２３－四羧基铁（Ⅲ），钴（Ⅱ）酞菁及固载在硅胶上的２，９，１６，２３－四甲酰胺基铁（Ⅲ），钴（Ⅱ）酞菁，在水溶液中催化硫醇氧化的反应，比较了几种催化剂的性能，考察了反应条件对硫醇氧化反应的影响，提出了反应机理，结果表明，当硫醇浓度较高地，固载后的酞菁铁，其催化性能优于或接近未固载的酞菁铁；当而硫醇浓度较低时，固载后的金属酞菁显示出更接近实际的优越性，而两种金属酞菁固载后仍具有良     

酞菁铜与四氰代二甲基苯醌电荷转移反应的测定

用红外光谱、紫外可见光谱、循环伏安法等研究了三．（２，４－二特戊基苯氧基）－８－喹淋氧基酞菁铜（简称酞菁铜）和２－十八烷基－７，７，８，８－四氰二甲基苯醌（简称Ｃ１８－ＴＣＮＱ）在Ｌａｎｇ－ｍｕｉｒ－Ｂｌｏｄｇｅｔｔ（ＬＢ）膜中的电荷转移。实验结果表明，在交替和混合ＬＢ膜中，酞菁铜和Ｃ１８－ＴＣ－ＮＱ分子之间均发生了电荷转移，其中酞菁铜为给体分子，ＴＣＮＱ为受体分子。在混合ＬＢ膜中，电荷转移程度较大。电导率测量表明荷移反应使ＬＢ膜的电导率较纯酞菁铜ＬＢ膜提高了３个数量级。     

酞菁钴吡啶轴向配合物的合成及表征

从4-硝基邻苯二腈出发，首先合成了酞菁钴的衍生物——对称的四取代烷基苯氧基酞菁钴，并以此为基础，采用溶剂热的方法合成了与吡啶形成的无取代轴向配合物，对相关化合物进行了红外、紫外、质谱的表征．初步尝试了由溶剂热的方法制备金属酞菁轴向配合物．     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.