New method of fluorination using potassium fluoride in ionic liquid: significantly enhanced reactivity of fluoride and improved selectivity

We have found the new nucleophilic fluorination reaction of some halo- and mesylalkanes to the corresponding fluoroalkanes with KF in the presence of [bmim][BF4] under various reaction conditions. 2-(3-Methanesulfonyloxypropoxy)naphthalene (1) was used as a model compound to optimize this fluorination reaction. Whereas the fluorination of the mesylate 1 with KF in an organic solvent such as CH3CN at 100 degrees C occurred hardly even after 24 h, the same reaction in ionic liquids, [bmim][BF4], as a reaction solvent was completed within 1.5 h, affording the wanted product 2-(3-fluoropropoxy)naphthalene 2a (85%) together with the alkene byproduct 2c (10%). Very interestingly, however, the addition of water (5 equiv) completely eliminated the formation of the undesired alkene 2c and thus gave higher yield of 2a (92%, entry 2). The use of acetonitrile as a cosolvent did not affect the reactivity of the fluorination. The presence of a proper amount of cosolvent was rather desirable (94% yield of 2a). We performed fluorination reactions with other ionic liquids ([bmim][PF6], [bmim][SbF6], [bmim][OTf], and [bmim][N(Tf)2], and two other cosolvents, to find the optimal ionic liquid and cosolvent. Nine different compounds were examined, including the 10 g-synthesis of 2-(fluoromethyl)naphthalene in 93% of isolated yield.     

Application of ionic liquid halide nucleophilicity for the cleavage of ethers: a green protocol for the regeneration of phenols from ethers

We have used the high nucleophilicity of bromide ion in the form of the ionic liquid, 1-n-butyl-3-methylimidazolium bromide ([bmim][Br]), for the nucleophilic displacement of an alkyl group to regenerate a phenol from the corresponding aryl alkyl ether. Using 2-methoxynaphthalene (1) as a model compound, we found that the combination of ionic liquid [bmim][Br] and p-toluenesulfonic acid with warming effected demethylation in 14 h, affording the desired product 2-naphthol (2) in good yield (97%). Various other protic acids (MsOH, hydrochloric acid (35%), dilute sulfuric acid (50%)) could be used as a proton source in this demethylation reaction. Under the same conditions, cleavage of alkyl alkyl ether 2-(3-methoxypropyl)naphthalene yielded mixture of corresponding 2-(3-bromopropyl)naphthalene and 2-(3-hydroxypropyl)naphthalene. Dealkylation of various aryl alkyl ethers could also be achieved using significantly reduced (i.e., stoichiometric) amounts of concentrated hydrobromic acid (47%) in the ionic liquid. Both procedures afforded the desired products in moderate to good yield; however, cleavage of aryl alkyl cyclic ether, 2,3-dihydrobenzofuran, resulted in low yield of the desired product o-2-bromoethylphenol. The convenience of this method for ether cleavage and its effectiveness using only a moderate excess of hydrobromic acid make it attractive as a green chemical method.     

Ceric ammonium nitrate (CAN) as oxidizing or nitrating reagent for organic reactions in ionic liquids

The reaction of ceric ammonium nitrate, (NH₄)₂[Ce(NO₃)₆] or CAN, with naphthalene and 2-methylnaphthalene in the ionic liquid 1-ethyl-3-methylimidazolium triflate showed that the reaction products are strongly dependent on the water content of the ionic liquid and that cerium(IV) in the ionic liquid can electrochemically be regenerated.     

Significantly enhanced reactivities of the nucleophilic substitution reactions in ionic liquid

We have investigated the reactivities of various metal fluorides in the nucleophilic fluorination of 2-(3-methanesulfonyloxypropyl)naphthalene (1) as a model compound in the presence of 1-n-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]). The higher periodic alkali metal fluorides demonstrate greater reactivity. The fluorination using CsF among the alkali metal fluorides was completed in 20 min, affording the desired product 2-(3-fluoropropyl)naphthalene (2a, 95%) without any byproducts. However, the fluorinations using alkali earth, transition, and low periodic alkali metal fluorides under the same conditions occurred rarely or not at all. We have also carried out the various facile nucleophilic substitutions such as halogenations, acetoxylation, nitrilation, and alkoxylations of mesyloxyalkane 1 and 2-(3-bromopropyl)naphthalene (6) at the primary aliphatic position using the potassium halides, acetate, cyanide, and alkoxides, respectively, in the presence of ionic liquids. These reactions provided the desired products, such as 2-(3-halopropyl)naphthalenes 5-7 (95% for Cl, 96% for Br, and 93% for I), 2-(3-acetoxypropyl)naphthalene (8, 95%), 2-(3-cyanopropyl)naphthalene (9, 93%), and 2-(3-methoxypropyl)naphthalene (10, 92%).     

Ionic Liquid Solvent Based on Cyclic Guanidinium Cation for Nucleophilic Displacement Reactions

The nucleophilic displacement reaction of n-bromooctane and potassium iodide in ionic liquid based on cyclic guanidinium cation(2) was investigated. The kinetic reasuh shows that the rate of the reaction is enhanced in ionic liquid (2). The same reaction in [bmim][PF6] (1)(where bmim=1-butyl-3-methylimidazolium) was also studied. It was found that as a reaction medium ionic liquid (2) is better than (1) for nucelophilic displacement reactions.     

UV-light induced photodegradation of bisphenol a in water: Kinetics and influencing factors

The synthesis of dimethyl carbonate (DMC) from methanol and ethylene carbonate (EC) without using any solvent was investigated in the presence of ionic liquids as catalysts. The conversion of ethylene carbonate was affected by the structure of ionic liquid. For a series of 1-alkyl-3-methylimidazolium ionic liquids, the one with shorter alkyl chain and the one with more nucleophilic anion showed higher reactivity. The conversion of EC also increased with CO₂ pressure and reaction temperature. Esterification of EC and methanol can be considered as a pseudo-first order reaction with respect to EC concentration. The activation energy was estimated as 50.1 kJ/mol.     

Facile nucleophilic fluorination by synergistic effect between polymer-supported ionic liquid catalyst and tert-alcohol reaction media system

A highly efficient method was developed for nucleophilic fluorination using an alkali metal fluoride through the synergistic effect of the polymer-supported ionic liquid (PSIL) as a catalyst and tert-alcohol as an alternative reaction media. This PSIL/tert-alcohol system not only enhances the reactivity of alkali metal fluorides and reduces the formation of by-products but also allows the use of a polymer-supported catalyst protocol. As an example, the nucleophilic fluorinations of the model compound, 2-(3-bromopropoxy)naphthalene, with CsF using only tert-amyl alcohol as solvent (for 2 h reaction time), 0.5 equiv of PS[hmim][BF₄] in CH₃CN (for 12 h reaction time), and 0.5 equiv of PS[hmim][BF₄] in tert-amyl alcohol (which is a PSIL/tert-alcohol system for the synergistic effect; for 2 h reaction time) provided 18, 40, and 84% yield, respectively. The characteristics of the nucleophilic fluorination reactions of some halo- and alkanesulfonyloxyalkane systems to the corresponding fluoroalkanes using various alkali metal fluorides are also reported.     

Facile ring-closure cyclization of arenes by nucleophilic C-alkylation reaction in ionic liquid

A novel synthetic method using an ionic liquid (IL) for a six-membered ring-closure cyclization is described. The ring-closure cyclization by nucleophilic C-alkylation was achieved with various halo- and alkanesulfonyloxyalkyl aromatic compounds in high yields with minimal byproducts using ILs as the reaction media in the absence of any catalyst. For example, the cyclization of 2-(3-methanesulfonyloxy-propoxy)naphthalene (1a) to 2,3-dihydro-1H-naphtho[2,1-b]pyran (2) in IL [bmim][PF₆] proceeded selectively at 150 °C for 24 h in 85% yield.     

Facile nucleophilic fluorination of primary alkyl halides using tetrabutylammonium fluoride in a tert-alcohol medium

Nonpolar protic reaction media such as t-amyl alcohol allow the aliphatic, nucleophilic fluorination reaction of primary haloalkane systems to fluoroalkanes, using tetrabutylammonium fluoride (TBAF), to proceed chemo-selectively at a reasonable reaction rate under mild conditions to afford the fluoro-product in high yield. As an example, the nucleophilic fluorination of 2-(3-iodopropoxy)naphthalene (1a) as the primary haloalkane model compound, with TBAF in acetonitrile as a polar aprotic solvent, CsF in t-amyl alcohol as a nonpolar protic solvent, and TBAF in t-amyl alcohol for 1 h provided 2-(3-fluoropropoxy)naphthalene (2a) in 38, 5, and 76% yields, respectively.     

Unexpected results of a SNAr-reaction. A novel synthetic approach to 1-arylthio-2-naphthols

1-(Phenylthio)-3-(pyridin-3-yl)-2-naphthol was obtained as an unexpected result of a nucleophilic aromatic substitution reaction of 3-(pyridine-3-yl)naphthalene-2-yl trifluoromethanesulfonate with thiophenol. This observation led to the discovery of an easy to handle method to synthesize 1-arylthio-2-naphthols. It has been revealed that electron withdrawing groups on the aryl thiol promoted the yields and heterocycle substituents at the 3-position of the naphthalene core are tolerable by the reaction. This reaction can thus serve as a corner stone in the structural diversification of 3-heterocycle substituted 1-arylthio-2-naphthols as potential inhibitors of cytochrome P450.     

1,2-Dicarba-closo-dodecaboran-1-yl naphthalene derivatives

1,2-Dicarba-closo-dodecaboranes (o-carboranes) and naphthalenes have potential value as components or building blocks for supramolecular systems. We have efficiently synthesized 1-(1,2-dicarba-closo-dodecaboran-1-yl)naphthalene and 2-(1,2-dicarba-closo-dodecaboran-1-yl)naphthalene derivatives by employing three preparative methods: cyclization of the corresponding acetylenes with decaborane(14), an Ullmann-type coupling reaction of carboranes with aryl halide, and the aromatic nucleophilic substitution (S(N)Ar) reaction of aryl-o-carboranes with nitrophenyl halide. The optimum conditions of each method for synthesis of the title compounds were also investigated.     

Effect of water on product yields of 2-azidobenzoic acid photolysis in aprotic solvents

The effect of water admixtures on the formation of 2-oxo-(3H)-azepine-3-carboxylic acid and 2,1-benzisoxazol-3(1H)-one in the photolysis of 2-azidobenzoic acid in aprotic solvents has been investigated. It has been shown that the addition of nucleophilic agents to the reaction mixture determines the yields of not only 3H-azepines, the products of benzene ring expansion, but also the intramolecular cyclization product 2,1-benzisoxazol-3(1H)-one. Participation of the formed 2,1-benzisoxazol-3(1H)-one in the reaction has been suggested as an explanation of the effect of nucleophilic compounds (water, ethanol, and 2,1-benzisoxazol-3(1H)-one) on the product yield of the monomolecular reaction.     

具有表面活性的功能化离子液体N-(三甲氧硅丙基)-N-甲基-2-吡咯烷酮盐酸盐的合成与表征

以N-甲基-2-吡咯烷酮和3-氯丙基三甲氧基硅烷单体为原料,利用SN2亲核取代反应合成具有一定表面活性的功能化离子液体N-(三甲氧硅丙基)-N-甲基-2-吡咯烷酮盐酸盐.通过元素分析、红外光谱和核磁共振对功能化离子液体进行表征,并测定了其表面张力和导电率.结果表明,合成的产物结构与其理论结构基本一致,具有较宽的液体温度范围和较低的表面张力,并具有较高的电导率,随着温度的升高,电导率逐渐增高.     

Comparison of physicochemical properties of new ionic liquids based on imidazolium, quaternary ammonium, and guanidinium cations

More than 50 ionic liquids were prepared by using imidazolium, quaternary ammonium, and guanidinium cations and various anions. In these series, different cationic structures such as 1-benzyl-3-methylimidazolium [Bzmim]+, 1,3-dibenzylimidazolium [BzmiBz]+, 1-octyl-3-methylimidazolium [C8mim]+, 1-decyl-3-methylimidazolium [C10mim]+, tricapryl-methylammonium [Aliquat]+, benzyltriethylammonium [BzTEA]+, phenyltrimethylammonium [PhTMA]+, and dimethyldihexylguanidinium [DMG]+ were combined with anions, p-toluenesulfonate [TSA](-), dicyanoamide [DCA]-, saccharine (2-sulfobenzoic acid imide sodium salt) [SAC]-, trifluoroacetate [TFA]-, bis(trifluoromethanesulfonyl)imide [Tf2N]-, trifluoromethanesulfonate [TfO]-, and thiocyanate [SCN]-. Important physical data for these ionic liquids are collated, namely solubility in common solvents, viscosity, density, melting point and water content. Apart from the viscosity, the Newtonian and non-Newtonian behavior of these ionic liquids is also disclosed. Stability of these ionic liquids under thermal, basic, acidic, nucleophilic, and oxidative conditions was also studied. The features of the solid-liquid phase transition were analyzed, namely the glass transition temperature and the heat capacity jump associated with the transition from the non-equilibrium glass to the metastable supercooled liquid. A degradation temperature of each ionic liquid was also determined. Comparisons of the properties of various ionic liquids were made.     

Influence of water on the surface of the water-miscible ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate: a sum frequency generation analysis

Sum frequency generation spectroscopy (SFG) was used to study the influence of water on the surface of the water-miscible ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate. The orientation of the cation at the gas-liquid interface was analyzed as a function of ionic liquid concentration in water for concentrations from 0 to 1 mole fraction of the ionic liquid. The cation was found to be oriented with the imidazolium ring nearly parallel to the surface plane with a tilt angle > or = 70 degrees when the ionic liquid was dry. Furthermore, no noticeable change in the orientation was observed when high concentrations of water were mixed with the ionic liquid. The cation butyl chain is projecting into the gas phase with a CH(3) tilt angle of 54 +/- 2 degrees when the ionic liquid is dry and 46 +/- 4 degrees when mixed with water. Water is oriented at the surface only for concentration < or = 0.02 mole fraction of the ionic liquid. At higher ionic liquid concentrations (mole fractions > or = 0.05) the gas-liquid interface resembles that of the pure ionic liquid.     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

A computational study of interactions between acetic acid and water molecules

Density functional theory calculations were performed for the title reactions to elucidate the difference between the strong cyclic hydrogen bond of (Me-COOH)(2) and the electrolytic dissociation, MeCOOH <==> Me-COO(-) + H(+), as a weak acid. The association of water clusters with acetic acid dimers strengthens the cyclic hydrogen bond. A nucleophilic attack of the carboxylic carbon by a water cluster leads to a first zwitterionic intermediate, MeCOO(-) + H(3)O(+) + (HO)(3)C-Me. The intermediate is unstable and is isomerized to a neutral interacting system, MeCOOH...(HO)(3)C-Me + H(2)O. The ethanetriol, (HO)(3)-CMe is transformed to an acetic acid monomer. The monomer may be dissociated to give a second zwitterionic intermediate with reasonable proton-relay patterns and energy changes. In proton relay reaction channels, H in MeCOOH is not an acidic proton but is always a hydroxy proton.     

A microscopic view of substitution reactions solvated by ionic liquids

The solvation effect of the ionic liquid 1-N-butyl-3-methylimidazolium hexafluorophosphate on nucleophilic substitution reactions of halides toward the aliphatic carbon of methyl p-nitrobenzenesulfonate (pNBS) was investigated by computer simulations. The calculations were performed by using a hybrid quantum-mechanical/molecular-mechanical (QM/MM) methodology. A semiempirical Hamiltonian was first parametrized on the basis of comparison with ab initio calculations for Cl(-) and Br(-) reaction with pNBS at gas phase. In condensed phase, free energy profiles were obtained for both reactions. The calculated reaction barriers are in agreement with experiment. The structure of species solvated by the ionic liquid was followed along the reaction progress from the reagents, through the transition state, to the final products. The simulations indicate that this substitution reaction in the ionic liquid is slower than in nonpolar molecular solvents proper to significant stabilization of the halide anion by the ionic liquid in comparison with the transition state with delocalized charge. Solute-solvent interactions in the first solvation shell contain several hydrogen bonds that are formed or broken in response to charge density variation along the reaction coordinate. The detailed structural analysis can be used to rationalize the design of new ionic liquids with tailored solvation properties.     

Ionic Liquid–Catalyzed Internal Redox Esterification Reaction

The internal redox esterification of α,β-unsaturated aldehydes and alcohols was carried out using different ionic liquids (ILs) as catalysts and reaction solvents. The basic ionic liquid, 1-butyl-3-methylimidazolium acetate ([bmim]OAc), exhibited the best activity for this reaction. The influences of the amount of ionic liquid catalyst and reaction time on yield of saturated ester have been investigated. The results showed that ionic liquid anions have a crucial effect on the redox esterification of α,β-unsaturated aldehydes and alcohols. The nucleophilic carbenes generated in situ from the ionic liquid cation were believed to be actual active species for this reactions.     

Nucleophilicity in ionic liquids. 2.(1) Cation effects on halide nucleophilicity in a series of bis(trifluoromethylsulfonyl)imide ionic liquids

In this work, the nucleophilicities of chloride, bromide, and iodide have been determined in the ionic liquids [bmim][N(Tf)(2)], [bm(2)im][N(Tf)(2)], and [bmpy][N(Tf)(2)] (where bmim = 1-butyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bmpy = 1-butyl-1-methylpyrrolidinium, and N(Tf)(2) = bis(trifluoromethylsulfonyl)imide). It was found that in the [bmim](+) ionic liquid, chloride was the least nucleophilic halide, but that changing the cation of the ionic liquid affected the relative nucleophilicities of the halides. The activation parameters DeltaH(), DeltaS(), and DeltaG() have been estimated for the reaction of chloride in each ionic liquid, and compared to a similar reaction in dichloromethane, where these parameters were found for reaction by both the free ion and the ion pair.