有机氧化还原液流电池的研究进展

氧化还原液流电池（简称液流电池）是一种正在积极研制开发的新型大容量电化学储能装置,其活性物质是流动的电解质溶液,最显著的特点是规模化蓄电. 在广泛利用可再生能源的呼声高涨形势下,可以预见液流电池将迎来一个快速发展的时期. 氧化还原活性物质是液流电池能源转化的载体,也是液流电池中最核心的部分.传统液流电池利用无机材料作为活性物质,然而,无机材料成本高、毒性、资源有限、形成枝晶和电化学活性低等缺点限制了液流电池的大规模应用. 有机活性物质由于具有成本低、“绿色”、资源丰富、分子能级易于调节和电化学反应快等优点,引起了国内外的广泛关注. 近年来,有机液流电池的性能得到快速提升,一系列有机活性物质相继被开发出来. 本文梳理了近年来有机液流电池的研究进展. 首先简要介绍了液流电池的应用领域和技术特点;然后根据电解液种类的不同,详细讨论了有机活性物质在水系和非水系液流电池的应用情况;最后展望了有机液流电池走向实际应用所面临的挑战和潜在研究方向.     

A membrane based on sulfonated polystyrene for a vanadium solid-salt battery

An ion exchange membrane (IEM) usually serves as a separator between the two half-cells and provides an ionic conduction path in redox flow batteries. The new vanadium solid-salt battery (VSSB) presents higher energy density than the traditional vanadium redox flow batteries (VRFBs). However, present IEMs are based on very expensive Nafion® membranes. In pursuit of lower cost, a membrane from sulfonated polystyrene (PE-01) is used for VSSB. In comparison with the traditional Nafion® 1135, PE-01 shows high energy efficiency with good cycling performance at current densities less than 10 mA cm^?2. This suggests that sulfonated polystyrene membrane is a promising candidate as separator for VSSB.     

Non-aqueous lithium bromine battery of high energy density with carbon coated membrane

Flow batteries with high energy density and long cycle life have been pursued to advance the progress of energy storage and grid application. Non-aqueous batteries with wide voltage windows represent a promising technology without the limitation of water electrolysis, but they suffer from low electrolyte concentration and unsatisfactory battery performance. Here, a non-aqueous lithium bromine rechargeable battery is proposed, which is based on Br_2/Br~-and Li~+/Li as active redox pairs, with fast redox kinetics and good stability. The Li/Br battery combines the advantages of high output voltage(~3.1 V),electrolyte concentration(3.0 mol/L), maximum power density(29.1 m W/cm~2) and practical energy density(232.6 Wh/kg). Additionally, the battery displays a columbic efficiency(CE) of 90.0%, a voltage efficiency(VE) of 88.0% and an energy efficiency(EE) of 80.0% at 1.0 m A/cm~2 after continuously running for more than 1000 cycles, which is by far the longest cycle life reported for non-aqueous flow batteries.     

A pH‐Neutral,Metal‐Free Aqueous Organic Redox Flow Battery Employing an Ammonium Anthraquinone Anolyte

Redox‐active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone‐based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH‐neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10‐anthraquinone‐2,7‐disulfonic diammonium salt AQDS(NH₄)₂ , as an anolyte material for pH‐neutral AORFBs with solubility of 1.9 m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH₄I catholyte, the resulting pH‐neutral AORFB with an energy density of 12.5 Wh L^?1 displayed outstanding cycling stability over 300 cycles. Even at the pH‐neutral condition, the AQDS(NH₄)₂ /NH₄I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm^?2 and a high power density of 91.5 mW cm^?2 at 100 % SOC. The present AQDS(NH₄)₂ flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low‐cost and benign pH‐neutral flow batteries for scalable energy storage.     

Full Dissolution of the Whole Lithium Sulfide Family (Li2S8 to Li2S) in a Safe Eutectic Solvent for Rechargeable Lithium–Sulfur Batteries

The lithium–sulfur battery is an attractive option for next‐generation energy storage owing to its much higher theoretical energy density than state‐of‐the‐art lithium‐ion batteries. However, the massive volume changes of the sulfur cathode and the uncontrollable deposition of Li₂S₂/Li₂S significantly deteriorate cycling life and increase voltage polarization. To address these challenges, we develop an ?‐caprolactam/acetamide based eutectic‐solvent electrolyte, which can dissolve all lithium polysulfides and lithium sulfide (Li₂S₈–Li₂S). With this new electrolyte, high specific capacity (1360 mAh g^?1) and reasonable cycling stability are achieved. Moreover, in contrast to conventional ether electrolyte with a low flash point (ca. 2 °C), such low‐cost eutectic‐solvent‐based electrolyte is difficult to ignite, and thus can dramatically enhance battery safety. This research provides a new approach to improving lithium–sulfur batteries in aspects of both safety and performance.     

A pH‐Neutral,Metal‐Free Aqueous Organic Redox Flow Battery Employing an Ammonium Anthraquinone Anolyte

Redox‐active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone‐based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH‐neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10‐anthraquinone‐2,7‐disulfonic diammonium salt AQDS(NH₄)₂ , as an anolyte material for pH‐neutral AORFBs with solubility of 1.9 m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH₄I catholyte, the resulting pH‐neutral AORFB with an energy density of 12.5 Wh L^?1 displayed outstanding cycling stability over 300 cycles. Even at the pH‐neutral condition, the AQDS(NH₄)₂ /NH₄I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm^?2 and a high power density of 91.5 mW cm^?2 at 100 % SOC. The present AQDS(NH₄)₂ flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low‐cost and benign pH‐neutral flow batteries for scalable energy storage.     

Reversible S0/MgSx Redox Chemistry in a MgTFSI2/MgCl2/DME Electrolyte for Rechargeable Mg/S Batteries

The redox chemistry of magnesium and its application in rechargeable Mg batteries has received increasing attention owing to the unique benefits of Mg metal electrodes, namely high reversibility without dendrite formation, low reduction potentials, and high specific capacities. The Mg/S couple is of particular interest owing to its high energy density and low cost. Previous reports have confirmed the feasibility of a rechargeable Mg/S battery; however, only limited cycling stability was achieved, and the complicated procedure for the preparation of the electrolytes has significantly compromised the benefits of Mg/S chemistry and hindered the development of Mg/S batteries. Herein, we report the development of the first rechargeable Mg/S battery with a MgTFSI₂/MgCl₂/DME electrolyte (DME=1,2‐dimethoxyethane, TFSI=bis(trifluoromethanesulfonyl)imide) and realize the best cycling stability among all reported Mg/S batteries by suppressing polysulfide dissolution. Mechanistic studies show that the battery works via S⁰/MgS_x redox processes and that the large voltage hysteresis is mainly due to the Mg anode overpotential.     

Bipolar Verdazyl Radicals for Symmetrical Batteries: Properties and Stability in All States of Charge

Redox flow batteries based on organic electrolytes are promising energy storage devices, but stable long-term cycling is often difficult to achieve. Bipolar organic charge-storage materials allow the construction of symmetrical flow batteries (i. e., with identical electrolyte composition on both sides), which is a strategy to mitigate crossover-induced degradation. One such class of bipolar compounds are verdazyl radicals, but little is known on their stability/reactivity either as the neutral radical, or in the charged states. Here, we study the chemical properties of a Kuhn-type verdazyl radical ( 1 ) and the oxidized/reduced form ( 1^+/− ). Chemical synthesis of the three redox-states provides spectroscopic characterization data, which are used as reference for evaluating the composition of the electrolyte solutions of an H-cell battery during/after cycling. Our data suggest that, rather than the charged states, the decomposition of the parent verdazyl radical is responsible for capacity fade. Kinetic experiments and DFT calculations provide insight in the decomposition mechanism, which is shown to occur by bimolecular disproportionation to form two closed-shell products (leuco-verdazyl 1H and triazole derivative 2 ).     

Functional Organosulfide Electrolyte Promotes an Alternate Reaction Pathway to Achieve High Performance in Lithium–Sulfur Batteries

Lithium–sulfur (Li‐S) batteries have recently received great attention because they promise to provide energy density far beyond current lithium ion batteries. Typically, Li‐S batteries operate by conversion of sulfur to reversibly form different soluble lithium polysulfide intermediates and insoluble lithium sulfides through multistep redox reactions. Herein, we report a functional electrolyte system incorporating dimethyl disulfide as a co‐solvent that enables a new electrochemical reduction pathway for sulfur cathodes. This pathway uses soluble dimethyl polysulfides and lithium organosulfides as intermediates and products, which can boost cell capacity and lead to improved discharge–charge reversibility and cycling performance of sulfur cathodes. This electrolyte system can potentially enable Li‐S batteries to achieve high energy density.     

A Membrane‐Free Redox Flow Battery with Two Immiscible Redox Electrolytes

Flexible and scalable energy storage solutions are necessary for mitigating fluctuations of renewable energy sources. The main advantage of redox flow batteries is their ability to decouple power and energy. However, they present some limitations including poor performance, short‐lifetimes, and expensive ion‐selective membranes as well as high price, toxicity, and scarcity of vanadium compounds. We report a membrane‐free battery that relies on the immiscibility of redox electrolytes and where vanadium is replaced by organic molecules. We show that the biphasic system formed by one acidic solution and one ionic liquid, both containing quinoyl species, behaves as a reversible battery without any membrane. This proof‐of‐concept of a membrane‐free battery has an open circuit voltage of 1.4 V with a high theoretical energy density of 22.5 Wh L⁻¹, and is able to deliver 90 % of its theoretical capacity while showing excellent long‐term performance (coulombic efficiency of 100 % and energy efficiency of 70 %).     

Novel,Stable Catholyte for Aqueous Organic Redox Flow Batteries: Symmetric Cell Study of Hydroquinones with High Accessible Capacity

Owing to their broad range of redox potential, quinones/hydroquinones can be utilized for energy storage in redox flow batteries. In terms of stability, organic catholytes are more challenging than anolytes. The two-electron transfer feature adds value when building all-quinone flow battery systems. However, the dimerization of quinones/hydroquinones usually makes it difficult to achieve a full two-electron transfer in practical redox flow battery applications. In this work, we designed and synthesized four new hydroquinone derivatives bearing morpholinomethylene and/or methyl groups in different positions on the benzene ring to probe molecular stability upon battery cycling. The redox potential of the four molecules were investigated, followed by long-term stability tests using different supporting electrolytes and cell cycling methods in a symmetric flow cell. The derivative with two unoccupied ortho positions was found highly unstable, the cell of which exhibited a capacity decay rate of ~50% per day. Fully substituted hydroquinones turned out to be more stable. In particular, 2,6-dimethyl-3,5-bis(morpholinomethylene)benzene-1,4-diol (asym-O-5) displayed a capacity decay of only 0.45%/day with four-week potentiostatic cycling at 0.1 M in 1 M H₃PO₄. In addition, the three fully substituted hydroquinones displayed good accessible capacity of over 82%, much higher than those of conventional quinone derivatives.     

Macromolecular Design Strategies for Preventing Active‐Material Crossover in Non‐Aqueous All‐Organic Redox‐Flow Batteries

Intermittent energy sources, including solar and wind, require scalable, low‐cost, multi‐hour energy storage solutions in order to be effectively incorporated into the grid. All‐Organic non‐aqueous redox‐flow batteries offer a solution, but suffer from rapid capacity fade and low Coulombic efficiency due to the high permeability of redox‐active species across the battery's membrane. Here we show that active‐species crossover is arrested by scaling the membrane's pore size to molecular dimensions and in turn increasing the size of the active material above the membrane's pore‐size exclusion limit. When oligomeric redox‐active organics (RAOs) were paired with microporous polymer membranes, the rate of active‐material crossover was reduced more than 9000‐fold compared to traditional separators at minimal cost to ionic conductivity. This corresponds to an absolute rate of RAO crossover of less than 3 μmol cm⁻² day⁻¹ (for a 1.0 m concentration gradient), which exceeds performance targets recently set forth by the battery industry. This strategy was generalizable to both high and low‐potential RAOs in a variety of non‐aqueous electrolytes, highlighting the versatility of macromolecular design in implementing next‐generation redox‐flow batteries.     

Sustainable Electrical Energy Storage through the Ferrocene/Ferrocenium Redox Reaction in Aprotic Electrolyte

The large‐scale, cost‐effective storage of electrical energy obtained from the growing deployment of wind and solar power is critically needed for the integration into the grid of these renewable energy sources. Rechargeable batteries having a redox‐flow cathode represent a viable solution for either a Li‐ion or a Na‐ion battery provided a suitable low‐cost redox molecule soluble in an aprotic electrolyte can be identified that is stable for repeated cycling and does not cross the separator membrane to the anode. Here we demonstrate an environmentally friendly, low‐cost ferrocene/ferrocenium molecular redox couple that shows about 95 % energy efficiency and about 90 % capacity retention after 250 full charge/discharge cycles.     

A Nitrogen Battery Electrode involving Eight-Electron Transfer per Nitrogen for Energy Storage

Redox flow batteries have been discussed as scalable and simple stationary energy storage devices. However, currently developed systems encounter less competitive energy density and high costs, restricting their wider application. There is a lack of appropriate redox chemistry, preferably based on active materials that are abundant in nature and show high solubility in aqueous electrolytes. A nitrogen-centered redox cycle operating between the limiting species ammonia and nitrate via an eight-electron redox reaction stayed practically unnoticed, albeit its ubiquity in biological processes. Ammonia or nitrate are world-scale chemicals with high aqueous solubility, and are then comparably safe. We demonstrate here the successful implementation of such a nitrogen-based redox cycle between ammonia and nitrate with eight-electron transfer as a catholyte for Zn-based flow batteries, which continuously worked for 12.9 days with 930 charging-discharging cycles. A very competitive energy density of 577 Wh L⁻¹ can be reached, which is well above most reported flow batteries (e.g. 8 times the standard Zn-bromide battery), demonstrating that the nitrogen cycle with eight-electron transfer can offer promising cathodic redox chemistry for safe, affordable, and scalable high-energy-density storage devices.     

An Aqueous Conducting Redox‐Polymer‐Based Proton Battery that Can Withstand Rapid Constant‐Voltage Charging and Sub‐Zero Temperatures

Electrodes based on organic matter operating in aqueous electrolytes enable new approaches and technologies for assembling and utilizing batteries that are difficult to achieve with traditional electrode materials. Here, we report how thiophene‐based trimeric structures with naphthoquinone or hydroquinone redox‐active pendent groups can be processed in solution, deposited, dried and subsequently polymerized in solid state to form conductive (redox) polymer layers without any additives. Such post‐deposition polymerization offers efficient use of material, high mass loading (up to 10 mg cm^?2) and good flexibility in the choice of substrate and coating method. By employing these materials as anode and cathode in an acidic aqueous electrolyte a rocking‐chair proton battery is built. The battery shows good cycling stability (85 % after 500 cycles), withstands rapid charging, with full capacity (60 mAh g^?1) reached within 100 seconds, allows for direct integration with photovoltaics, and retains its favorable characteristics even at ?24 °C.     

A Redox‐Active 2D Metal–Organic Framework for Efficient Lithium Storage with Extraordinary High Capacity

Metal–organic framework cathodes usually exhibit low capacity and poor electrochemical performance for Li‐ion storage owing to intrinsic low conductivity and inferior redox activity. Now a redox‐active 2D copper–benzoquinoid (Cu‐THQ) MOF has been synthesized by a simple solvothermal method. The abundant porosity and intrinsic redox character endow the 2D Cu‐THQ MOF with promising electrochemical activity. Superior performance is achieved as a Li‐ion battery cathode with a high reversible capacity (387 mA h g^?1), large specific energy density (775 Wh kg^?1), and good cycling stability. The reaction mechanism is unveiled by comprehensive spectroscopic techniques: a three‐electron redox reaction per coordination unit and one‐electron redox reaction per copper ion mechanism is demonstrated. This elucidatory understanding sheds new light on future rational design of high‐performance MOF‐based cathode materials for efficient energy storage and conversion.     

A Sustainable Redox‐Flow Battery with an Aluminum‐Based,Deep‐Eutectic‐Solvent Anolyte

Nonaqueous redox‐flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum‐based deep‐eutectic‐solvent is investigated as an anolyte for redox‐flow batteries. The aluminum‐based deep‐eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li⁺/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L⁻¹ and an energy density of 189 Wh L⁻¹ or 165 Wh kg⁻¹ have been achieved when coupled with a I₃⁻/I⁻ catholyte. The prototype cell has also been extended to the use of a Br₂‐based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L⁻¹. The synergy of highly abundant, dendrite‐free, multi‐electron‐reaction aluminum anodes and environmentally benign deep‐eutectic‐solvent anolytes reveals great potential towards cost‐effective, sustainable redox‐flow batteries.     

Anthraquinone with tailored structure for a nonaqueous metal-organic redox flow battery

A nonaqueous, hybrid metal-organic redox flow battery based on tailored anthraquinone structure is demonstrated to have an energy efficiency of ~82% and a specific discharge energy density similar to those of aqueous redox flow batteries, which is due to the significantly improved solubility of anthraquinone in supporting electrolytes.     

Electrochromic Poly(chalcogenoviologen)s as Anode Materials for High‐Performance Organic Radical Lithium‐Ion Batteries

A series of electrochromic electron‐accepting poly(chalcogenoviologen)s with multiple, stable, and reversible redox centers were used as anodic materials in organic radical lithium‐ion batteries (ORLIBs). The introduction of heavy atoms (S, Se, and Te) into the viologen scaffold significantly improved the capacity and cycling stability of the ORLIBs. Notably, the poly(Te‐BnV) anode was able to intercalate 20 Li ions and showed higher conductivity and insolubility in the electrolyte, thus contributing to a reversible capacity of 502 mAh g^?1 at 100 mA g^?1 when the Coulombic efficiency approached 100 %. The charged/discharged state of flexible electrochromic batteries fabricated from these anodic materials could be monitored visually owing to the unique electrochromic and redox properties of the materials. This study opens a promising avenue for the development of organic polymer‐based electrodes for flexible hybrid visual electronics.     

An Aqueous Redox‐Flow Battery with High Capacity and Power: The TEMPTMA/MV System

Redox‐flow batteries (RFB) can easily store large amounts of electric energy and thereby mitigate the fluctuating output of renewable power plants. They are widely discussed as energy‐storage solutions for wind and solar farms to improve the stability of the electrical grid. Most common RFB concepts are based on strongly acidic metal‐salt solutions or poorly performing organics. Herein we present a battery which employs the highly soluble N,N,N‐2,2,6,6‐heptamethylpiperidinyl oxy‐4‐ammonium chloride (TEMPTMA) and the viologen derivative N,N′‐dimethyl‐4,4‐bipyridinium dichloride (MV) in a simple and safe aqueous solution as redox‐active materials. The resulting battery using these electrolyte solutions has capacities of 54 Ah L^?1, giving a total energy density of 38 Wh L^?1 at a cell voltage of 1.4 V. With peak current densities of up to 200 mA cm^?2 the TEMPTMA/MV system is a suitable candidate for compact high‐capacity and high‐power applications.